Chuangwei RGB Electronics NTUDU5 WIFI MODULE User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3938781
Application ID	LcAxs0ifuOlLmEU4qHrwsg==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	9.61kB (120118 bits)
Date Submitted	2018-07-25 00:00:00
Date Available	2018-07-25 00:00:00
Creation Date	2018-07-18 15:53:46
Producing Software	Microsoft® Word 2013
Document Lastmod	2018-07-20 15:04:36
Document Title	User Manual
Document Creator	Microsoft® Word 2013
Document Author:	匿名用户

Shenzhen skyworth RGB electronic co., LTD.
Model: NTUD - U5
Operation Instruction
Respect of customer, sincerely thank you for purchasing
SKYWORTH equipped with wireless WIFI NTUD - U5 - type
USB peripheral products.
This product can support USB2.0 protocol, based on the
IEEE802.11 a/b/g/n/ac BT5.0 standard design.
With all the
way to send and receive all the way (2T2R) dual channel work,
maximum transmission rate of up to 866 Mbps.Ensure that
users browse and download data flow, security and stability.
NTUD - U5 wireless WIFI USB peripheral product support
Windows XP/Vista / 7 / Linux operating system.In SKYWORTH
TV, have complete embedded in the product and the driver,
without user to install, and at the same time support Linux and
Android.
Used in TV production operation is as follows:
1. Turn on the TV, switch to the "home page" interface.
2. Select "Settings" feature. "OK" to enter
3. Select "network setup" function. "OK" to enter;
4. Choose the "wireless network", "OK" to enter;
5. According to the needs, select "auto search", "manual
connection", etc. Press the "OK" to enter
6. Choose their own after the AP name "OK" to enter, Enter the
password.
Television system has the memory function, for the first time
to use should be according to the above steps, later need not
operation, boot automatically connected.If need to change the
AP or change the mode of connection, need according to the
above steps again.
Extreme Test Temperature:0 °C to +60 °C
Note: This equipment has been tested and found to
comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different
from that to which the receiver is - connected.
- Consult the dealer or an experienced radio/television
technician for help.
To
assure
continued
compliance,
any
changes
or
modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate this
equipment.
FCC Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure
limits set forth for an uncontrolled environment.
This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received,
including interference that may cause undesired operation.
Regulation information
This device and its antenna(s) must not be co-located or
operating in conjunction with any other antenna or transmitter.
(2) This compliance to FCC radiation exposure limits for an
uncontrolled environment, and minimum of 20cm separation
between antenna and body.
(3) The device is going to be operated in 5150~5250MHz
frequency range. It is restricted indoor environment only.
(4) Manual Information to the End User
The OEM integrator has to be aware not to provide information
to the end user regarding how to install or remove this RF
module in the user’s manual of the end product which
integrates this module.
(5) The end product must carry a label stating “Contains
Transmitter Module FCC ID: 2ANM3NTUDU5” or shall use
e-labeling.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Author                          : 匿名用户
Create Date                     : 2018:07:18 15:53:46+08:00
Modify Date                     : 2018:07:20 15:04:36+08:00
Language                        : zh-CN
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Format                          : application/pdf
Creator                         : 匿名用户
Creator Tool                    : Microsoft® Word 2013
Metadata Date                   : 2018:07:20 15:04:36+08:00
Producer                        : Microsoft® Word 2013
Document ID                     : uuid:b17643e0-337c-4342-93b4-f76ae470c80c
Instance ID                     : uuid:09dd5896-cab3-4112-892a-4025c7a09919
Page Count                      : 4

EXIF Metadata provided by EXIF.tools