Chungear Co CE10001 Ceiling Fan Remote Controller (Transmitter) User Manual

Download:
Mirror Download [FCC.gov]
Document ID	1598015
Application ID	XmVl481B26hgcrrJ/4Vo0Q==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	6.66kB (83259 bits)
Date Submitted	2011-12-07 00:00:00
Date Available	2011-12-07 00:00:00
Creation Date	2011-12-02 17:08:39
Producing Software	Acrobat Distiller 8.3.1 (Windows)
Document Lastmod	2011-12-07 11:32:47
Document Title	Microsoft Word - TR95A+MR62A說明書.doc
Document Creator	PScript5.dll Version 5.2
Document Author:	user

CEILING FAN REMOTE CONTROLLER
OPERATION AND INSTALLATION INSTRUCTIONS
(Please keep this instruction pamphlet.)
IMPORTANT
YOU MUST SET CEILING FAN MANUAL SWITCH TO HIGH SPEED AND LIGHT KIT
(IF ANY) TO ON POSITION BEFORE OPERATING REMOTE CONTROL.
IMPORTANT POINTS TO REMEMBER:
1.Read and save these instructions.
2.Please note that all fixed wiring appliances should be installed by a qualified electrician.
3.The supply to the remote control receiver should be connected through a mains switch, i.e. existing wall switch.
4.Disconnect from power supply at wall switch before working on remote control receiver or ceiling fan.
5.Install receiver into the ceiling fan canopy of the fan to ensure proper protection.
6.This unit is to be used for the control of ceiling fan and in an AC110V/120V 60Hz power supply only.
7.Do not install in damp locations or immerse into water. (For indoor use only.)
8.Do not pull on or cut leads shorter.
9.Do not drop or bump the unit.
10. PLEASE NOTE: The battery will weaken with age and should be replaced before leaking takes place as this will
damage the transmitter. Dispose of used battery properly, keep the battery out of reach of children.
11. CAUTION: To reduce the risk of fire or injury, do not use this product in conjunction with any variable (rheostat) wall
control.
INSTALLATION INSTRUCTIONS
CAUTION: INCORRECT WIRE CONNECTION WOULD DAMAGE THIS RECEIVER.
1.Ceiling fan must be set at HIGH speed and light kit (If any) at ON position by pulling the “Pull Switch” after installation.
2.Once the connection has been made, the receiver inserts into the drop rod hanging bracket. The canopy comes up to
cover the receiver and bracket.
LEARNING PROCESS
1. After installing the unit and power on, open battery cover (with batteries, DC1.5V/ AAA*2pcs,
installed), use a ball pen to press and hold the ”LEARN” key 1~3seconds. FAN will be turn off
and then FAN turn ON at medium speed, which indicate that learning process finished. Please
note that must press the “LEARNING KEY” within 30sensonds after power on. If just replace
batteries, no need to re-learn.
2. Please note that the transmitter can learn in multiple receiver, when doing learning process
please make sure not learn in other receiver.
FUNCTIONS OF TRANSMITTER
: Press and release immediately to turn on or off the fan.
: Press and release immediately to turn on or off the light.
TR95A
Installation of Transmitter Wall
Mount Holder with two screws
LEARN
FEDERAL COMMUNICATIONS COMMISSION
INTERFERENCE STATEMENT
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
--Reorient or relocate the receiving antenna. --Increase the separation between the equipment and receiver.
--Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
--Consult the dealer or an experienced radio/TV technician for help.
CAUTION:
To assure continued FCC compliance:
Any changes or modifications not expressly approved by the grantee of this device could void the user's authority to
operate the equipment.
FCC ID：KUJCE10001
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
XMP Toolkit                     : 3.1-702
Producer                        : Acrobat Distiller 8.3.1 (Windows)
Creator Tool                    : PScript5.dll Version 5.2
Modify Date                     : 2011:12:07 11:32:47+08:00
Create Date                     : 2011:12:02 17:08:39+08:00
Metadata Date                   : 2011:12:07 11:32:47+08:00
Format                          : application/pdf
Title                           : Microsoft Word - TR95A+MR62A說明書.doc
Creator                         : user
Document ID                     : uuid:c55a2a86-4016-45c6-a51d-1eaddce872c1
Instance ID                     : uuid:87497ad5-0cc9-4de4-8723-232f6557bce2
Page Count                      : 2
Author                          : user

EXIF Metadata provided by EXIF.tools