Chungear Co CE10201 Ceiling Fan Remote Controller (Transmitter) User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2069851
Application ID	w2tTb3Bk4v571Hl4ZK+vEA==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	7.6kB (95061 bits)
Date Submitted	2013-09-12 00:00:00
Date Available	2013-09-12 00:00:00
Creation Date	2013-09-02 09:46:30
Producing Software	Acrobat Distiller 8.3.1 (Windows)
Document Lastmod	2013-09-02 17:13:58
Document Title	Microsoft Word - TR158A+MR101F+APP手机.doc
Document Creator	PScript5.dll Version 5.2
Document Author:	user

CEILING FAN REMOTE CONTROLLER
OPERATION AND INSTALLATION INSTRUCTIONS
(Please keep this instruction pamphlet.)
IMPORTANT
YOU MUST SET CEILING FAN MANUAL SWITCH TO HIGH SPEED AND LIGHT KIT
(IF ANY) TO ON POSITION BEFORE OPERATING REMOTE CONTROL.
IMPORTANT POINTS TO REMEMBER:
1.Read and save these instructions.
2.Please note that all fixed wiring appliances should be installed by a qualified electrician.
3.The supply to the remote control receiver should be connected through a mains switch, i.e. existing wall
switch.
4.Disconnect from power supply at wall switch before working on remote control receiver or ceiling fan.
5.Install receiver into the ceiling fan canopy of the fan to ensure proper protection.
6.This unit is to be used for the control of ceiling fan and in a AC110/120V 60Hz power supply only.
7.Do not install in damp locations or immerse in water. (For indoor use only.)
8.Do not pull on or cut leads shorter.
9.Do not drop or bump the unit.
10. PLEASE NOTE: The battery will weaken with age and should be replaced before leaking takes place
as this will damage the transmitter. Dispose of used battery properly, keep the battery out of reach of
children.
11. CAUTION: To reduce the risk of fire or injury, do not use this product in conjunction with any variable
(rheostat) wall control.
INSTALLATION INSTRUCTIONS
CAUTION: INCORRECT WIRE CONNECTION WOULD DAMAGE THIS RECEIVER.
1.Ceiling fan must be set at HIGH speed and light kit (If any) at ON position by pressing the “Light Switch”
after installation.
2.Once the connection has been made, the receiver inserts into the drop rod hanging bracket. The canopy
comes up to cover the receiver and bracket.
BLACK
(Mains/Live)
ANTENNA
WHITE
(Mains/Neutral)
(Leave unconnected and
do not cut)
BLUE
(Light/Live)
WHITE
(Fan/Neutral)
BLACK
(Fan/Live)
VIEW AFTER INSTALLATION
AC POWER SUPPLY
ANTENNA
BLACK
CODE SWITCH
1.CODE SWITCH: Codes are set by pushing dip switches up or down. It is imperative that the code used
for both transmitter and receiver is exactly the same, otherwise remote controller will not work. Please
note the code switch will enable you to operate a second remote controller independently. For example, if
you have two ceiling fans with 2 remote control units, set 2 different codes
for each set
of transmitter/receivers. This means you can operate each ceiling fan
independently.
2.Your remote control is ready for use after battery installation.
ON DIP
DIP SWITCH
TRANSMITTER
FUNCTIONS OF TRANSMITTER
: Turn off the fan.
3 : Turn on the fan at high speed
2 : Turn on the fan at medium speed
1 : Turn on the fan at low speed.
LIGHT:
ON/OFF - Press and release immediately to turn on or off the light
DIMMER- Press and hold to dim or brighten lights to the desired level and
release. (Only for the tungsten bulb.)
If light load over 190W, light will shut down.
MODEL:TR158A
Ceiling Fan Remote Control
Wiring Connection
BLACK
WHITE
TO FAN / LIGHT / NEUTRAL
WHITE
TO FAN/LIVE
BLACK
TO LIGHT LIVE
BLUE
AC POWER INPUT
FAN MOTOR
ANTENNA
MODEL:MR101F
FEDERAL COMMUNICATIONS COMMISSION
INTERFERENCE STATEMENT
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if
not installed and
used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-- Consult the dealer or an experienced radio/TV technician for help.
CAUTION:
To assure continued FCC compliance:
1. Any changes or modifications not expressly approved by the grantee of this device could
void the user's authority to operate the equipment.
2. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance
20cm between the radiator & your body.
FCC ID：KUJCE10201
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
XMP Toolkit                     : 3.1-702
Format                          : application/pdf
Title                           : Microsoft Word - TR158A+MR101F+APP手机.doc
Creator                         : user
Create Date                     : 2013:09:02 09:46:30+08:00
Creator Tool                    : PScript5.dll Version 5.2
Modify Date                     : 2013:09:02 17:13:58+08:00
Metadata Date                   : 2013:09:02 17:13:58+08:00
Producer                        : Acrobat Distiller 8.3.1 (Windows)
Document ID                     : uuid:ca1a602a-1e63-48b1-8f92-2e0a015c5e58
Instance ID                     : uuid:2119159a-cdbf-4fb0-80c1-da3aead52ddf
Page Count                      : 3
Author                          : user

EXIF Metadata provided by EXIF.tools