Chungear Co CE10203 Ceiling Fan Remote Controller (Transmitter) User Manual JY610C L JY326B
Chungear Industrial Co Ltd Ceiling Fan Remote Controller (Transmitter) JY610C L JY326B
User manual
CEILING FAN REMOTE CONTROLLER OPERATION AND INSTALLATION INSTRUCTIONS (Please keep this instruction pamphlet.) IMPORTANT YOU MUST SET CEILING FAN MANUAL SWITCH TO HIGH SPEED AND LIGHT KIT (IF ANY) TO ON POSITION BEFORE OPERATING REMOTE CONTROL. IMPORTANT POINTS TO REMEMBER: 1.Read and save these instructions. 2.Please note that all fixed wiring appliances should be installed by a qualified electrician. 3.The supply to the remote control receiver should be connected through a mains switch, i.e. existing wall switch. 4.Disconnect from power supply at wall switch before working on remote control receiver or ceiling fan. 5.Install receiver into the ceiling fan canopy of the fan to ensure proper protection. 6.This unit is to be used for the control of ceiling fan and in a AC110/120V 60Hz power supply only. 7.Do not install in damp locations or immerse in water. (For indoor use only.) 8.Do not pull on or cut leads shorter. 9.Do not drop or bump the unit. 10. PLEASE NOTE: The battery will weaken with age and should be replaced before leaking takes place as this will damage the transmitter. Dispose of used battery properly, keep the battery out of reach of children. 11. CAUTION: To reduce the risk of fire or injury, do not use this product in conjunction with any variable (rheostat) wall control. INSTALLATION INSTRUCTIONS CAUTION: INCORRECT WIRE CONNECTION WOULD DAMAGE THIS RECEIVER. 1.Ceiling fan must be set at HIGH speed and light kit (If any) at ON position by pressing the “Light Switch” after installation. 2.Once the connection has been made, the receiver inserts into the drop rod hanging bracket. The canopy comes up to cover the receiver and bracket. FUNCTIONS OF TRANSMITTER LIGHT FAN Model : JY610C FAN:Press and release immediately to turn on the fan at HI speed,MED speed,LOW speed,off. LIGHT:Press and release immediately to turn on or off the light. Press and hold to dim or brighten lights to the desired level and release. (Only for the tungsten bulb.). Ceiling Fan Remote Control Wiring Connection Installation of Transmitter Wall Mount Holder with two screws. CAUTION: To assure continued FCC compliance: Any changes or modifications not expressly approved by the grantee of this device could void the user's authority to operate the equipment. FCC ID:KUJCE10203 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No XMP Toolkit : 3.1-702 Format : application/pdf Title : Microsoft Word - JY610C-L JY326B.doc Creator : user Create Date : 2013:05:13 16:06:53+08:00 Creator Tool : PScript5.dll Version 5.2 Modify Date : 2013:07:29 17:12:17+08:00 Metadata Date : 2013:07:29 17:12:17+08:00 Producer : Acrobat Distiller 8.3.1 (Windows) Document ID : uuid:74d2afef-9d4c-45b8-a33b-ed43a45331c5 Instance ID : uuid:acdfb551-2384-4b3b-ba6e-132b4f960b9e Has XFA : No Page Count : 3 Author : userEXIF Metadata provided by EXIF.tools