CipherLab 8062 BT barcode scanner User Manual 8062 Reference Manual v2 11

CipherLab Co., Ltd. BT barcode scanner 8062 Reference Manual v2 11

UserManual.wiki >

CipherLab >

8062 User Manual HTML Version

Manual

8000 Series Mobile Compute

8000/8001/8020/8021/8061/8062/8071

Version 2.10

The software contains proprietary information of CIPHERLAB CO., LTD.; it is provided

under a license agreement containing restrictions on use and disclosure and is also

protected by copyright law. Reverse engineering of the software is prohibited.

Due to continued product development this information may change without notice. The

information and intellectual property contained herein is confidential between CIPHERLAB

and the client and remains the exclusive property of CIPHERLAB CO., LTD. If you find

any problems in the documentation, please report them to us in writing. CIPHERLAB

does not warrant that this document is error-free.

No part of this publication may be reproduced, stored in a retrieval system, or

transmitted in any form or by any means, electronic, mechanical, photocopying,

recording or otherwise without the prior written permission of CIPHERLAB CO., LTD.

For product consultancy and technical support, please contact your local sales

representative. Also, you may visit our web site for more information.

The CipherLab logo is a registered trademark of CIPHERLAB CO., LTD.

Microsoft, Windows, and the Windows logo are registered trademarks of Microsoft

Corporation in the United States and/or other countries.

Bluetooth is a trademark of Bluetooth SIG, Inc., U.S.A.

Other product names mentioned in this manual may be trademarks or registered

trademarks of their respective companies and are hereby acknowledged.

The editorial use of these names is for identification as well as to the benefit of the

owners, with no intention of infringement.

CIPHERLAB CO., LTD.

Website: http://www.cipherlab.com

FOR USA

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the

user is encouraged to try to correct the interference by one or more of the following

measures:

 Reorient or relocate the receiving antenna.

 Increase the separation between the equipment and receiver.

 Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

 Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following

two conditions: (1) This device may not cause harmful interference, and (2) this device

must accept any interference received, including interference that may cause undesired

operation.

FOR CANADA

This digital apparatus does not exceed the Class B limits for radio noise emissions from

digital apparatus as set out in the interference-causing equipment standard entitled

"Digital Apparatus," ICES-003 of Industry Canada.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following

two conditions: (1) This device may not cause harmful interference, and (2) this device

must accept any interference received, including interference that may cause undesired

operation.

Cet appareil numerique respecte les limites de bruits radioelectriques applicables aux

appareils numeriques de Classe B prescrites dans la norme sur le material brouilleur:

"Appareils Numeriques," NMB-003 edictee par l'Industrie.

FOR HAND-HELD PRODUCT WITH RF FUNCTIONS

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled

environment. End users must follow the specific operating instructions for satisfying RF

exposure compliance. To maintain compliance with FCC RF exposure compliance requirements,

IMPORTANT NOTICES

please follow operation instruction as documented in this manual.

FCC Caution: Any changes or modifications not expressly approved by the party responsible

for compliance could void the user's authority to operate this equipment.

FOR PRODUCT WITH LASER

Per FDA and IEC standards, the scan engines described in this manual are not given a

laser classification. However, the following precautions should be observed:

CAUTION

This laser component emits FDA / IEC Class 2 laser light at the exit port. Do not

stare into beam.

SAFETY PRECAUTIONS

RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.

DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.

 The use of any batteries or charging devices, which are not originally sold or

manufactured by CipherLab, will void your warranty and may cause damage to

human body or the product itself.

 DO NOT disassemble, incinerate or short circuit the battery.

 DO NOT expose the scanner or the battery to any flammable sources.

 For green-environment issue, it's important that batteries should be recycled in a

proper way.

 Under no circumstances, internal components are self-serviceable.

 The charging and communication cradle uses an AC power adaptor. A socket outlet

shall be installed near the equipment and shall be easily accessible. Make sure there

is stable power supply for the mobile computer or its peripherals to operate properly.

CARE & MAINTENANCE

 When the body of the mobile computer gets dirty, use a clean and wet cloth to wipe

off the dust. DO NOT use/mix any bleach or cleaner. Always keep the LCD dry.

 For a liquid crystal display (LCD), use a clean, non-abrasive, lint-free cloth to wipe

dust off the screen. DO NOT use any pointed or sharp object to move against the

surface.

 If you want to put away the mobile computer for a period of time, download the

collected data to a host computer, and then take out the battery pack. Store the

mobile computer and battery pack separately.

 When the mobile computer resumes its work, the main and backup batteries will take

a certain time to become fully charged.

 If you shall find the mobile computer malfunctioning, write down the specific scenario

and consult your local sales representative.

Version Date Notes

2.11 May 23, 2008  Modified: Specifications – Drop Test 1.2 meters

2.10 Apr. 24, 2008 New Word template applied

2.01 Aug. 10, 2007  Modified: section 1.5.9 Reader – Defaults updated

2.00 Apr. 14, 2007  New release

RELEASE NOTES

CONTENTS

IMPORTANT NOTICES........................................................................................................................... - 3 -

For USA .................................................................................................................................................- 3 -

For Canada...........................................................................................................................................- 3 -

For Hand-held Product with RF Functions.......................................................................................- 3 -

For Product with Laser .......................................................................................................................- 4 -

Safety Precautions..............................................................................................................................- 4 -

Care & Maintenance...........................................................................................................................- 4 -

RELEASE NOTES ................................................................................................................................... - 5 -

INTRODUCTION.......................................................................................................................................... 1

Getting Familiarized with 8000 ............................................................................................................2

Charging the Battery .........................................................................................................................4

Dimensions ..............................................................................................................................................5

Features....................................................................................................................................................5

Inside the Package .................................................................................................................................6

Accessories ..............................................................................................................................................6

USING 8000 MOBILE COMPUTER........................................................................................................... 7

1.1 Battery ...............................................................................................................................................7

1.1.1 Inserting the Battery ...............................................................................................................8

1.1.2 Charging the Battery...............................................................................................................9

1.1.3 Caution of Low Battery Charge .............................................................................................9

1.1.4 Power Management ...............................................................................................................9

1.2 Memory........................................................................................................................................... 10

1.2.1 Caution of Data Loss............................................................................................................ 10

1.3 Keypad ............................................................................................................................................ 11

1.3.1 Screen Icons.......................................................................................................................... 12

1.3.2 keypad Layout....................................................................................................................... 13

1.4 LCD .................................................................................................................................................. 14

1.4.1 Adjusting the Backlight ....................................................................................................... 14

1.5 Notifications................................................................................................................................... 15

1.5.1 Status LED ............................................................................................................................. 15

1.5.2 Audio ...................................................................................................................................... 15

1.6 Data Capture.................................................................................................................................. 16

1.6.1 Scan Engine Options............................................................................................................ 16

1.6.2 Symbologies Supported ...................................................................................................... 16

1.7 Communications via the Cradle.................................................................................................. 18

1.7.1 Setting up the Cradle ........................................................................................................... 18

1.7.2 Cradle Options ...................................................................................................................... 18

1.8 Communications Over Wireless Networks................................................................................ 20

1.8.1 IR/IrDA ................................................................................................................................... 21

1.8.2 Bluetooth ............................................................................................................................... 22

8000 Series Mobile Computer Reference Manual

1.8.3 IEEE 802.11b/g .................................................................................................................... 23

LEARNING SOFTWARE ARCHITECTURE ...............................................................................................25

2.1 Application Module....................................................................................................................... 27

2.1.1 Application Generator (AG)................................................................................................. 27

2.1.2 CipherNet............................................................................................................................... 27

2.1.3 User Program ........................................................................................................................ 28

2.2 System Configuration................................................................................................................... 28

2.2.1 System Menu ........................................................................................................................ 28

2.2.2 Kernel ..................................................................................................................................... 28

2.2.3 Program Manager ................................................................................................................ 28

SYSTEM MENU ........................................................................................................................................29

3.1 Information .................................................................................................................................... 30

3.1.1 Understanding Device Code................................................................................................ 30

3.2 Settings........................................................................................................................................... 31

3.2.1 Clock....................................................................................................................................... 31

3.2.2 Backlight Period ................................................................................................................... 31

3.2.3 CPU speed ............................................................................................................................. 31

3.2.4 Auto Off.................................................................................................................................. 31

3.2.5 Power On Options................................................................................................................. 32

3.2.6 Key Click ................................................................................................................................ 32

3.2.7 System Password ................................................................................................................. 32

3.2.8 Font......................................................................................................................................... 32

3.2.9 Reset to Default.................................................................................................................... 32

3.3 Tests ................................................................................................................................................ 33

3.3.1 Reader.................................................................................................................................... 33

3.3.2 Buzzer..................................................................................................................................... 33

3.3.3 LCD & LED ............................................................................................................................. 33

3.3.4 Keyboard................................................................................................................................ 33

3.3.5 Memory .................................................................................................................................. 33

3.3.6 Echo Test ............................................................................................................................... 34

3.4 Memory........................................................................................................................................... 35

3.4.1 Size information ................................................................................................................... 35

3.4.2 Initialize.................................................................................................................................. 35

3.5 Power .............................................................................................................................................. 36

3.6 Load Program ................................................................................................................................ 37

3.7 Serial PPP Menu ........................................................................................................................... 38

3.7.1 Information............................................................................................................................ 39

3.7.2 Connection Set...................................................................................................................... 40

3.7.3 Echo Test ............................................................................................................................... 41

3.8 IR Network Menu (Ethernet via IR)............................................................................................. 42

3.8.1 Information............................................................................................................................ 43

3.8.2 Network Setting.................................................................................................................... 44

3.8.3 Echo Tests.............................................................................................................................. 45

3.9 Bluetooth Menu — 8061/8062................................................................................................... 46

3.9.1 Information............................................................................................................................ 47

3.9.2 Connect Setting .................................................................................................................... 48

3.9.3 Security .................................................................................................................................. 49

3.9.4 Echo Tests.............................................................................................................................. 50

8000 Series Mobile Computer Reference Manual

3.9.5 Pairing Test ........................................................................................................................... 53

3.9.6 Freq. Dev. List ....................................................................................................................... 54

3.9.7 Network Setting.................................................................................................................... 55

3.10 Wi-Fi Menu — 8071 .................................................................................................................... 56

3.10.1 Information ......................................................................................................................... 57

3.10.2 Network Setting ................................................................................................................. 58

3.10.3 WLAN Setting ..................................................................................................................... 59

3.10.4 Security................................................................................................................................ 60

3.10.5 Echo Tests ........................................................................................................................... 61

PROGRAM MANAGER & KERNEL .........................................................................................................65

4.1 Program Manager......................................................................................................................... 65

4.1.1 Download............................................................................................................................... 66

4.1.2 Activate .................................................................................................................................. 68

4.1.3 Upload .................................................................................................................................... 69

4.2 Kernel.............................................................................................................................................. 70

4.2.1 Kernel Information............................................................................................................... 70

4.2.2 Load Program ....................................................................................................................... 71

4.2.3 Kernel Update ....................................................................................................................... 73

4.2.4 Test & Calibrate.................................................................................................................... 73

4.2.5 Bluetooth Menu — 8061/8062.......................................................................................... 74

SPECIFICATIONS ..................................................................................................................................... 75

DOWNLOAD UTILITIES............................................................................................................................77

ProgLoad.exe ........................................................................................................................................ 78

IRLoad.exe ............................................................................................................................................ 79

Command Line................................................................................................................................ 79

Download.exe ....................................................................................................................................... 80

Command Line................................................................................................................................ 80

TROUBLESHOOTING ...............................................................................................................................81

Answering light industrial demands, the 8000 Series Mobile Computer is specifically

designed for enterprise logistics use. Small-form-factor and light-weight, it proves to be

an ace player in retail and healthcare applications.

This line of product comes with optional Bluetooth and 802.11b/g wireless technologies,

enabling real time sharing of performance. The 8000 Series Mobile Computer is bundled

with powerful and rich features to ensure success in timely processing of information,

and thus, makes an ideal choice for inventory control, shop floor management,

warehousing and distribution operations. Being programmable, this handy device can run

custom applications or terminal emulation applications.

This manual serves to guide you through how to install, configure, and operate the

mobile computer. We recommend you to keep one copy of the manual at hand for quick

reference or maintenance purposes. To avoid any improper disposal or operation, please

read the manual thoroughly before use.

Thank you for choosing CipherLab products!

INTRODUCTION

8000 Series Mobile Computer Reference Manual

GETTING FAMILIARIZED WITH 8000

錯誤! 尚未定義樣式。

Figure 1: Overview

8000 Series Mobile Computer Reference Manual

CHARGING THE BATTERY

You can use a cradle to charge the Mobile Computer, or the 4-Slot Battery Charger to

charge up to four batteries. Below is the 4-Slot Battery Charger. For the Charging &

Communication Cradle, refer to section 1.7 Communications via the Cradle.

Warning: It is recommended that the charging devices be operated at room

temperature (18°C to 25°C) for optimal performance. The charging devices

will not charge the battery when the temperature exceeds 40°C.

1) The Battery Charger can be mounted on table or wall. Drill two holes (centers spaced

160 millimeters apart), secure the two supplied screws, and mount the Battery

Charger by sliding over screws.

2) Slide the battery into the battery compartment at a proper angle, with contacts facing

to back.

3) Connect the power supply cord to the power receptacle on the charger.

4) Connect the other end of the power supply cord to a suitable power outlet.

5) Press the power switch on, and the Battery Charger’s LED will be red.

6) While charging, the LED of the battery compartment will be red. When fully charged,

the LED will be green.

LED Status Meaning

Power Solid red

Off

Power ON

Power OFF

Battery Charging Solid red

Solid green

Flashing red and green

Off

Charging battery

Charging done

Error occurs

Battery not ready

Figure 2: 4-Slot Battery Charger

錯誤! 尚未定義樣式。

DIMENSIONS

FEATURES

 Ergonomic design — small-form-factor with wrist strap for secure hold.

 Built light-weight to enhance mobility and ease data-intensive applications.

 Flexible wireless solution — IR/IrDA integrated, with connectivity options for

Bluetooth, 802.11b/g or both.

 Acoustic Coupler for US market, ideal for replacement of older style terminals.

 Graphic monochrome LCD supports double-byte characters and bitmap graphics.

 Programmable feedback includes buzzer and LED indicator.

 Quick link to any backend database through Windows-based CipherNet programs for

VT100/220 and IBM 5250 emulation.

 Easy customization of AG applications through Windows-based Application Generator

(AG) programs for preloaded AG Runtime.

 Programming support includes BASIC & C compilers.

 Accessories and peripherals include international AC charging cradle, etc.

Figure 3: Dimensions

8000 Series Mobile Computer Reference Manual

INSIDE THE PACKAGE

In addition to the mobile computer, the following items are included in the package. Save

the box and packaging material for future use in case you need to store or ship the

mobile computer.

Items Inside Package 8000 8001 8020 8021 8061/8062 8071

Rechargeable Li-ion battery − √ − √ √ √

Wrist Strap √ √ − − √ √

Acoustic Coupler Belt − − √ √ − −

Belt Clip − − − − − √

Software & Manual CD √ √ √ √ √ √

Note: For battery charging, you need to purchase a charging cradle separately.

ACCESSORIES

Rich choices of optional accessories are available for you to enhance the total

performance of the mobile computer.

 Spare rechargeable Li-ion battery

 4-slot Battery Charger

 Communication Cradle

 Charging & Communication Cradle

 Modem Cradle

 Ethernet Cradle

 308 USB Virtual COM Interface (convert RS-232 to USB)

 Bluetooth Access Point

This chapter explains the features and usage of the 8000 Series Mobile Computer. The

8000 family includes:

 8000 Batch type (powered by two AAA alkaline batteries)

 8001 Batch type (powered by Li-ion battery)

 8020 Acoustic Coupler (powered by two AAA alkaline batteries)

 8021 Acoustic Coupler (powered by Li-ion battery)

 8061 Bluetooth Class 1 (powered by Li-ion battery)

 8062 Bluetooth Class 2 (powered by Li-ion battery)

 8071 802.11b/g (powered by Li-ion battery)

IN THIS CHAPTER

1.1 Battery....................................................................... 7

1.2 Memory.................................................................... 10

1.3 Keypad..................................................................... 11

1.4 LCD ......................................................................... 14

1.5 Notifications.............................................................. 15

1.6 Data Capture ............................................................ 16

1.7 Communications via the Cradle.................................... 18

1.8 Communications over Wireless Networks....................... 20

1.1 BATTERY

 Main Battery

Except that 8000/8020 is powered by two AAA alkaline batteries,

8001/8021/8061/8062/8071 is powered by a rechargeable 3.7 V/700 mAh Li-ion

battery pack, and it takes approximately two hours to fully charge it.

For power-saving purpose, always turn off the backlight while working in a well-lit

area. When the backlight is on for extended periods of time, the main battery will

become low sooner than expected.

The smart battery icon on the LCD screen shows the status of power consumption.

There are two ways to monitor a low battery charge or discharged battery from the

screen.

 Examine the level of the battery icon

 Monitor voltage level (see section 3.5 Power)

Chapter 1

USING 8000 MOBILE COMPUTER

8000 Series Mobile Computer Reference Manual

 Backup Battery

The backup battery on the main board takes charge when the main battery is

removed or drained out. When fully charged, the 3.0 V/7 mAh rechargeable Lithium

button cell helps retain data in SRAM and maintain the running of the real-time clock

and calendar for at least 30 days without the main battery. In the meantime, you

have to replace the main battery as soon as possible.

It takes at least twenty-four hours to fully charge the backup battery. However, it is

not necessary to fully charge the backup battery for the mobile computer to work.

 Monitor voltage level (see section 3.5 Power)

1.1.1 INSERTING THE BATTERY

For shipping and storage purposes, save the mobile computer and the main battery in

separate packages. This will keep both batteries in good condition for future use.

Note: Any improper handling may reduce the battery life.

1) Hold the mobile computer face down in one hand as shown below.

2) Press the battery lid release and slide the battery lid.

3) Remove the battery lid by the other hand.

4) Slide the battery pack into the battery compartment at a proper angle (30°~45°) so

that the contacts of the battery are pressed onto the protruding contacts inside the

compartment. Make sure that the battery is snugly fit into the compartment.

5) Replace the battery lid and lock it firmly.

Note: For a new battery, make sure it is fully charged before use. Always prepare a

spare battery pack, especially when you are on the road.

Figure 4: Installing the Main Battery

Chapter 1 錯誤! 尚未定義樣式。

1.1.2 CHARGING THE BATTERY

The main and backup batteries may not be charged to full for shipment. When you first

receive the package, you will need to charge batteries to full before using the mobile

computer.

Note: For initial charging, it takes approximately 2 hours to fully charge the main

battery.

Because the internal backup battery is constantly charged from the main battery, the

initial charging requires inserting the battery pack to the mobile computer and then

seating the mobile computer in the cradle for charging. This will have both the main and

backup batteries charged at the same time.

Note: For a new battery, make sure it is fully charged before use. Always prepare a

spare battery pack, especially when you are on the road.

1.1.3 CAUTION OF LOW BATTERY CHARGE

The power source for the mobile computer to work can be alkaline batteries (2*AAA for

8000/8020) or the rechargeable battery pack (for 8001/8021/8061/8062/8071). The

alkaline batteries or the battery pack also charges the backup battery on the main board

so that the data stored in SRAM can be retained properly. Therefore, when the main

battery charge goes low, you need to replace the alkaline batteries or the battery pack.

For 8001/8021/8061/8062/8071, you may charge the battery pack in the cradle as soon

as possible. Most of all, always save data before it is too late; you should upload

important data on a regular basis.

Warning: Data loss may occur with SRAM during low battery condition. Always save

data before running out of power or keep a fresh battery for replacement

(or 2*AAA for 8000/8020).

1.1.4 POWER MANAGEMENT

For any portable device, power management is a critical issue especially when you are on

the road. Below are some tips to help you save battery power.

Warning: Using backlight, wireless connectivity, and peripherals while on battery

power will substantially reduce battery power.

 To speed up charging the mobile computer, turn off the mobile computer and seat it

in the cradle.

 Bring a second battery pack on the road.

 Stop wireless connectivity, Bluetooth or 802.11b/g when not in use.

8000 Series Mobile Computer Reference Manual

1.2 MEMORY

The collected data can be sent back to a host computer immediately over wireless

networks, or stored in memory (SRAM) and upload later. The mobile computer is

equipped with a calendar chip for accurate time/date logging.

 Read-only Memory (ROM)

2 megabytes flash memory for storing core, OS, application programs, fonts, etc.

 Random-access Memory (RAM)

2 megabytes SRAM for storing data. Its contents will be retained by the backup

battery.

1.2.1 CAUTION OF DATA LOSS

When the main battery is removed or drained, the backup battery on the main board is

to retain the contents of SRAM and maintain the running of real-time clock and calendar

for at least 30 days, on condition that the backup battery has already been fully charged.

If you want to put away the mobile computer for a couple of days, you should be aware

that data loss occurs when both the main and backup batteries discharge completely.

Therefore, it is necessary to upload data and files before putting away the mobile

computer!

Chapter 1 錯誤! 尚未定義樣式。

1.3 KEYPAD

The mobile computer is equipped with a keypad of 21 keys for system setup, user entry

and so on. The keypad comes with programmable LED backlight, like the screen. Refer to

section 1.4 LCD for screen & backlight settings.

Silicon rubber has been chosen for their durability and prompt feedback. The key click

can be configured through programming or the System Menu.

Below briefly describes the functions of common keys on the mobile computer.

SCAN

It will trigger the scan engine to read a barcode, if the COM port is enabled.

ENTER

Two on each side of the [SCAN] trigger, user-friendly and convenient for either right-handed or

left-handed operator to perform general function of the [ENTER] key.

Normally, the [ENTER] key is used for command execution or input confirmation.

ESC (Escape)

Normally, this key is used to stop and exit the current operation.

BS (Backspace)

If this key is being held down for more than one second, a clear code will be sent.

FN (Function)

This key serves as a modifier key and has to be used together with another key. For example,

press [FN/ALPHA] three times to enter the function mode, and then, press [1] so that it can

produce the result of F1.

POWER

In order to prevent an accidental press of the [POWER]

key, you need to hold down this key for

approximately 1.5 seconds to turn ON/OFF the mobile computer.

Note: Functionality of keys is application-dependent.

8000 Series Mobile Computer Reference Manual

1.3.1 SCREEN ICONS

When any of the following icons appears on the screen, it indicates a certain mode is

activated. It means holding down the specific key is unnecessary.

Screen Icon Description

A This icon appears when you press [FN/ALPHA] once, indicating it is set to alphabetic

mode for typing capital letters.

a This icon appears when you press [FN/ALPHA] twice, indicating it is set to

alphabetic mode for typing small letters.

F This icon appears when you press [FN/ALPHA] three times, indicating it is set to the

function mode Then, press another key ([1] ~ [9]) to produce the result. However,

the icon will not go off.

 To get the value of another key combination modified by the function key, keep

pressing another key ([1] ~ [9]) to produce the result.

 To exit the function mode, press [FN/ALPHA] again and the icon will go off.

Note: When using the function key to modify another key, the system will send the

associated key code to the application program, and it is up to the application

program to interpret the key code.

When in alpha mode, it takes turns to show alphabets and number when you keep

pressing the same key; each press must not exceed one second. For example, keep

pressing the number key [2] on the 24-key mobile computer, it will take turns to show

“A”, “B”, “C” or “2”.

 When you first press the number key [2], it will product the letter “A” or “a”.

 When you press the number key [2] twice (the time interval must not exceed one

second), it will produce the letter “B” or “b”.

 When you press the number key [2] three times (the time interval between each

press must not exceed one second), it will produce the letter “C” or “c”.

 When you press the number key [2] four times (the time interval between each press

must not exceed one second), it will produce the number “2”.

In order to get the desired character, you will need to press the same key, one to four

times (the time interval between each press must not exceed one second). Only when

you stop pressing the same key for longer than one second or you press another key, will

the system send the real key code to the application program.

Chapter 1 錯誤! 尚未定義樣式。

1.3.2 KEYPAD LAYOUT

The layout of the 21-key keypad is similar to that of a telephone, which consists of an

alphanumeric keypad, navigation and function keys, as well as assorted characters.

By default, it is set to numeric mode. Press the [FN/ALPHA] key to enter alpha mode,

capital or small letters.

21-key layout

It consists of the following keys:

 [SCAN] trigger, the yellow one at top

 two [ENTER] keys, the blue ones next to the trigger

 two arrow keys for moving the cursor up or down

 an alphanumeric keypad and assorted characters

 [POWER] key, the red one at bottom

By default, it is set to numeric mode. The [FN/ALPHA] key serves as a toggle among numeric,

alpha (lower-case alphabetic), ALPHA (upper-case alphabetic) input modes, as well as function

mode.

Note: It is not necessary to hold down the [FN/ALPHA] key.

Figure 5: Keypad layout

8000 Series Mobile Computer Reference Manual

1.4 LCD

The mobile computer comes with a 3” FSTN graphic LCD, 100 by 64 pixels resolutions,

which can be programmed to display text or graphics, such as specific font and company

logo, to meet varying application needs.

Options Font Size (pixels) Characters by lines

English font Font size 6×8 (pixels)

Font size 8×16 (pixels)

16 characters by 8 lines

12 characters by 4 lines

Chinese font Font size 16×16 (pixels) 7 characters by 4 lines

Other language fonts,

company logo… Programmable

Note: Normally, the bottom line (ICON_ZONE) is reserved to display status icons, such

as the battery icon.

1.4.1 ADJUSTING THE BACKLIGHT

The backlight of screen and keypad helps ease reading under dim environments. It can

be turned on and adjusted decreasingly or increasingly by the following key combinations.

Keep pressing the key combination until the contrast is decreased or increased to a

desired level.

Warning: Using backlight while on battery power will substantially reduce battery

power. It is suggested to dim the backlight while working in a well-lit area

or automatically turn it off when not in use.

Key Combination Action

[FN/ALPHA] + [Enter] Toggle ON/OFF the backlight

[FN/ALPHA] + [Up] Turn ON the backlight of LCD and increase its contrast

[FN/ALPHA] + [Down] Turn ON the backlight of LCD and decrease its contrast

Note: Hold down the [FN/ALPHA] key and press the second key for adjustment.

Chapter 1 錯誤! 尚未定義樣式。

1.5 NOTIFICATIONS

1.5.1 STATUS LED

The dual-color LED above the screen is used to provide information on the charging

status and can be programmed to provide information that helps diagnosing.

For example, if you are using AG Runtime, you will be informed of the scanning result

immediately. The green LED is used for "Good Read" while collecting data.

Tasks Green LED Red LED

Charging 8000 --- On

Charging done On ---

Good Read On ---

Error occurs --- On

1.5.2 AUDIO

The mobile computer has a low power transducer type buzzer. It can be programmed for

status feedback. Its frequency and duration are software programmable.

8000 Series Mobile Computer Reference Manual

1.6 DATA CAPTURE

1.6.1 SCAN ENGINE OPTIONS

Delivering flexibility to meet different requirements, the following scan engine options are

provided —

 1D CCD scan engine

 1D Laser scan engine

1.6.2 SYMBOLOGIES SUPPORTED

The mobile computer is capable of scanning barcodes of a number of symbologies that

are enabled by default while running the preloaded AG runtime. Refer to section 3.3.1

Reader for functional test.

Note: Instead of running the preloaded AG runtime or terminal emulation program, you

can develop your own applications to control the scan engine for data collection.

If you need to scan barcodes that are encoded in a symbology that is disabled by default,

Application Generator (AG*.exe) allows configuring symbology settings, as well as

reader settings. First, enable the desired symbologies, and then, download application to

the mobile computer.

Note: For details on configuring reader and symbology settings, please refer to the

documentation of the software you use.

Symbologies Supported: Enable/Disable CCD/Laser

Codabar Enabled

Code 93 Enabled

MSI Disabled

Plessey Disabled

Telepen Disabled

Code 128 Enabled

EAN-128 Enabled

Code 128

ISBT-128 Disabled

Industrial 25 Enabled

Interleaved 25 Enabled

Code 2 of 5

Matrix 25 Disabled

Code 39 Enabled

Italian Pharmacode Disabled

Code 3 of 9

French Pharmacode Disabled

Chapter 1 錯誤! 尚未定義樣式。

EAN-8 Enabled

EAN-8 Addon 2 Disabled

EAN-8 Addon 5 Disabled

EAN-13 Enabled

EAN-13 & UPC-A Addon 2 Disabled

EAN-13 & UPC-A Addon 5 Disabled

ISBN Disabled

UPC-E0 Enabled

UPC-E1 Disabled

UPC-E Addon 2 Disabled

UPC-E Addon 5 Disabled

EAN/UPC

UPC-A Enabled

RSS RSS-14 Disabled

RSS Limited Disabled

RSS Expanded Disabled

8000 Series Mobile Computer Reference Manual

1.7 COMMUNICATIONS VIA THE CRADLE

1.7.1 SETTING UP THE CRADLE

The cradle is designed for charging and communications at the same time. You may

choose a cradle type that best suits your needs.

1) Place the cradle on a flat and clean surface.

2) Connect the power supply cord to the power jack on the back of the cradle, and then

connect the other end of the power supply cord to a suitable power outlet. The cradle

is ready for charging the mobile computer.

3) Seat the mobile computer in the cradle.

If data communications are desired at the same time, you can establish a proper

connection with a computer or remote host. Refer to the Installation Guide of your

cradle.

1.7.2 CRADLE OPTIONS

The following cradle types are available on order —

Cradle Type Charging & Comm. Cradle

Modem Cradle Ethernet Cradle

POWER Jack √ √ √

RS-232 Port √ √ √

Figure 6: Setting up cradle

Chapter 1 錯誤! 尚未定義樣式。

Line Jack − √ −

Phone Jack − √ −

RJ-45 Port − − √

IP Reset Switch − − √

Note: (1) Modem Cradle — Delivering flexibility in making a connection, the Modem

Cradle integrates the modem functionality (56 kbps) into the cradle.

(2) Ethernet Cradle — Refer to the Ethernet Cradle manual for more information.

Figure 7: Cradle Options

8000 Series Mobile Computer Reference Manual

1.8 COMMUNICATIONS OVER WIRELESS NETWORKS

The 8000 Series Mobile Computer supports state-of-the-art wireless technologies so that

it can send/receive data in real time in an efficient way.

 WPAN: Infrared (IR/IrDA) technology for data exchange, embedded

 WPAN: Bluetooth technology for cable replacement & data exchange, embedded

 WLAN: IEEE 802.11b/g for wireless networking, optional

Generally, the coverage of each technology can be viewed as follows.

Figure 8: Coverage of Wireless Technologies

Chapter 1 錯誤! 尚未定義樣式。

1.8.1 IR/IrDA

The mobile computer has an integrated IR port on the bottom, which can directly

establish connection with an IR device for printing or data exchange. Simply have the IR

port of the mobile computer toward the IR port of the target device.

 This IR port supports CipherLab proprietary IR communication protocol and standard

IrDA protocol.

 IrDA specification defines communications (transmit/receive data) between two IrDA

enabled devices within a short range, line-of-sight.

IR/IrDA Specifications

Infra Red Optical

Data Rate Up to 115200 bps

Connected Devices Peer-to-Peer

Coverage From contact to 30 cm, line-of-sight

Standard CipherLab proprietary protocol and IrDA 1.0

8000 Series Mobile Computer Reference Manual

1.8.2 BLUETOOTH

Bluetooth technology is for cable replacement & data exchange. With built-in Bluetooth

module, the mobile computer can directly communicate with any Bluetooth enabled

device, not necessarily line-of-sight.

 Serial Port Profile (SPP) is for ad-hoc networking, without going through any access

point.

 Dial-Up Networking Profile (DUN) makes use of a Bluetooth modem or mobile phone

as a wireless modem.

 Human Interface Device Profile (HID) allows the mobile computer to work as an input

device, i.e. keyboard, for a host computer.

 Personal Area Networking Profile (PAN) makes use of Bluetooth Network

Encapsulation Protocol (BNEP) for IP networking over Bluetooth. Access points (AP)

are required.

Bluetooth Specification

Frequency Range 2.4 GHz

Data Rate 433 kbps

Connected Devices 1 for DUN mode

Up to 7 for SPP or PAN mode (AP required)

Profiles SPP, DUN, HID, PAN

Coverage Class 1 — 250 meters line-of-sight (8061)

Class 2 — 50 meters line-of-sight (8062)

Max. Output Power Class 1 — 16 mW

Class 2 — 1 mW

Spread Spectrum FHSS

Modulation GFSK

Standard Bluetooth version 1.1

Chapter 1 錯誤! 尚未定義樣式。

1.8.3 IEEE 802.11b/g

The 8071 mobile computer can easily connect to legacy networks through access points

(APs). Roaming among different networks is possible.

IEEE 802.11b/g is an industrial standard for Wireless Local Area Networking (WLAN),

which enables wireless communications over a long distance. The speed of connection

between two wireless devices will vary with range and signal quality. To maintain a

reliable connection, the data rate of the 802.11b/g system will automatically fallback as

range increases or signal quality decreases.

802.11b/g Specification

Frequency Range 2.4 GHz

Data Rate: 802.11b – 1, 2, 5.5, 11 Mbps

802.11g – 6, 9, 12, 18, 24, 36, 48, 54 Mbps

Connected Devices 1 for ad-hoc mode (No AP)

Multiple for infrastructure mode (AP required)

Profiles IP/TCP/UDP

Coverage 350 meters line-of-sight

Max. Output Power 50 mW (802.11b)

Spread Spectrum DSSS

Modulation 802.11b — DBPSK (1 Mbps), DQPSK (2 Mbps), CCK (5.5 & 11

Mbps)

802.11g — OFDM

Standard IEEE 802.11b/g, interoperable with Wi-Fi devices

8000 Series Mobile Computer Reference Manual

This chapter mainly describes the software inside the mobile computer. It consists of

three modules — Kernel, System, and Application; each has a function menu.

When a menu is displayed, you may select an item by either of the following ways:

 using the [UP] and [DOWN] keys to move the highlight bar

 pressing the number key that corresponds to the item number

On each screen, the last column displays status icons, such as:

 The smart battery icon indicates the current power status.

 The input mode or function mode, which is controlled by the [FN/ALPHA] key.

 To return to a previous page or menu, you may press [ESC] or follow the on-screen

instructions.

Chapter 2

LEARNING SOFTWARE ARCHITECTURE

8000 Series Mobile Computer Reference Manual

IN THIS CHAPTER

2.1 Application Module ..................................................... 27

2.2 System Configuration ................................................. 28

Figure 9: Software Architecture

Chapter 2 錯誤! 尚未定義樣式。

2.1 APPLICATION MODULE

For easy development of applications, the mobile computer ships with development tools

on the CD-ROM. It includes Windows-based programs Application Generator (batch

and WLAN), CipherNet (VT and 5250), download utilities, etc.

2.1.1 APPLICATION GENERATOR (AG)

The mobile computer is preloaded with AG Runtime. When you turn on the mobile

computer, it displays the Main Menu of AG application, as shown below.

Batch AG RF AG

Before using the mobile computer to collect data, you need to configure the application

with the companion tool on your computer. This time-saving development tool helps

create application templates on your computer.

For details on the AG application, please refer to separate user manual.

Application Generator AG Runtime Companion Tool on PC End

Batch AG U8000*.SHX AG8000N.exe

RF AG U8061*.SHX

U8071*.SHX

AG8061RF.exe

AG8071RF.exe

Note: The Application Generator (AG) software package includes

(1) a companion tool for quickly developing your application, i.e. AG or RF AG;

(2) several download utilities to make it versatile in use.

2.1.2 CIPHERNET

The mobile computer supports VT100/220 and IBM 5250 terminal emulation for

accessing a backend database. Instead of using Application Generator, you may

download the terminal emulation program, i.e. CipherNet Runtime, to the mobile

computer. Refer to section 3.6 Load Program. Then, run individual companion tool on

your computer. For details on the CipherNet application, please refer to separate user

manual.

Terminal Emulation CipherNet Runtime Companion Tool on PC End

VT100/220 80xx-VT.SHX CipherNet-VT.exe

IBM 5250 80xx-5250.SHX CipherNet-5250.exe

8000 Series Mobile Computer Reference Manual

2.1.3 USER PROGRAM

You may need to develop your own application program. For developing custom

applications, CipherLab provides BASIC and C compliers through licensing. For detailed

information, please contact your sales representative.

2.2 SYSTEM CONFIGURATION

For managing system configurations and multiple programs, each mobile computer

comes with the System Menu, Kernel, and Program Manager. Refer to the following

chapters on how to configure the 8000 Series Mobile Computer, regarding system

configurations and program download.

2.2.1 SYSTEM MENU

The System Menu is bundled with BASIC Runtime or user programs that are written in

“C”. It is for system configuration, functionality testing, downloading font file and

program.

2.2.2 KERNEL

Kernel is the innermost core of the OS. It provides services for downloading the active

application program or font file, updating the kernel or the active application program,

and configuring Bluetooth settings.

2.2.3 PROGRAM MANAGER

The Program Manager is part of the kernel. You may download as many as seven

application programs, or six programs plus one font file.

The System Menu is generated by a powerful utility, which offers an interface for

engineers (programmers or system integrator) to view system information, change the

configuration parameters, download programs and run diagnostics.

This menu is designed for engineering tests and maintenance ONLY. For this reason, the

System Menu provides password protection to prevent unauthorized users from

accidentally changing system settings.

Warning! The System Menu is NOT for the use of any end users. The system

password helps ensure system safety and integrity.

How to access the System Menu?

1) Turn off the mobile computer.

2) Press [7] + [9] + [Power].

IN THIS CHAPTER

3.1 Information............................................................... 30

3.2 Settings ................................................................... 31

3.3 Tests ....................................................................... 33

3.4 Memory.................................................................... 35

3.5 Power ...................................................................... 36

3.6 Load Program............................................................ 37

3.7 Serial PPP Menu......................................................... 38

3.8 IR Network Menu ....................................................... 42

3.9 Bluetooth Menu - 8061/8062 ....................................... 46

3.10 Wi-Fi Menu - 8071.................................................... 56

Chapter 3

SYSTEM MENU

8000 Series Mobile Computer Reference Manual

3.1 INFORMATION

Here provides important system information to help diagnose the system.

System Menu > 1. Information

H/W Hardware version (PCB)

S/N A serial number assigned to the mobile computer

M/D Manufacturing date

KNL Kernel version

LIB

BSC

C library version

BASIC Run-time version, if a BASIC application is downloaded

USR Application program version

DEV 5-digit code for optional hardware configurations

 For example, 1410-0 indicates the 21-key mobile computer uses rechargeable

Li-ion battery and is equipped with the CCD scan engine as well as the

802.11b/g module for wireless connectivity.

3.1.1 UNDERSTANDING DEVICE CODE

Device Code Modular Component Types

1st digit Reader module 0= none

1= CCD scan engine

2= Laser scan engine

2nd digit Wireless module 0= none

4= 802.11b/g

5= Bluetooth

6= Acoustic Coupler

(8000/8001)

(8071)

(8061/8062)

(8020/8021)

3rd digit Battery type 0= 2*AAA Alkaline batteries

1= Rechargeable Li-ion battery

4th digit Reserved 0

5th digit Keypad module 0= 21-key

Chapter 3 錯誤! 尚未定義樣式。

3.2 SETTINGS

You can change the default settings here.

System Settings Default Values

Clock blank

Backlight Period 20 seconds, Level 2

CPU Speed Full speed

Auto Off 10 minutes

Power On Mode Program Resume

Key Click Tone 2

System Password Open access

Font System font

Default Set (= Reset to Default) Load factory settings

3.2.1 CLOCK

Set date and time for Real Time Clock. Enter two digits for the year, i.e. 04 for 2004.

3.2.2 BACKLIGHT PERIOD

Set the backlight duration for the keypad and LCD. Enter a value between 0 and 9999

(second).

3.2.3 CPU SPEED

Set the desired CPU speed — Full, Half, Quarter, Eighth, and Sixteenth.

3.2.4 AUTO OFF

The mobile computer will be turned off automatically when no operation is taking place

during a specified period of time. Enter a value between 0 and 999 (minute).

Note: To disable this function, enter 0.

8000 Series Mobile Computer Reference Manual

3.2.5 POWER ON OPTIONS

Set the startup screen once the mobile computer is turned on:

Program Resume

Press [ENTER] to select “Program Resume” or “Program Restart”. When selected, the mobile

computer will start from the last session of program before it is turned off.

Program Restart

Press [ENTER] to select “Program Resume” or “Program Restart”. When selected, the mobile

computer will start from the first session of the program.

3.2.6 KEY CLICK

The system will produce an audible signal when any key on the keypad is pressed. The

current value is highlighted. Select a desired tone for the buzzer or mute it.

3.2.7 SYSTEM PASSWORD

Set a password to control user access to the System Menu. The password can be up to

eight alphanumeric characters.

Note: The password is case-sensitive. To disable a previous password, enter blank on

the "Input new password" and "Verify password" screens.

3.2.8 FONT

Font version information can be viewed here. It displays System Font if there is no

custom font file.

If a multi-language font file is downloaded, you will be able to select a font from the list.

3.2.9 RESET TO DEFAULT

Reset system settings to the default values, except for the reader settings.

Chapter 3 錯誤! 尚未定義樣式。

3.3 TESTS

Here provides functional tests for key parts.

3.3.1 READER

The supported symbologies depend on the scan engine you use. Refer to section 1.6

Data Capture for symbologies that are enabled by default. For symbologies that are

disabled by default, they must be enabled through programming.

 Test the reading performance of the scanner. Press [SCAN] to start.

 To stop and exit the test, press any key.

3.3.2 BUZZER

Test the buzzer with different frequency/duration combinations. Press [Enter] to start. To

stop and exit the test, press any key.

3.3.3 LCD & LED

Test the LCD display and LED indicator. Press [Enter] to start. To stop and exit the test,

press any key.

3.3.4 KEYBOARD

Test the rubber keys. Press any key and its corresponding character will be shown on the

screen. To stop and exit the test, press [ESC].

3.3.5 MEMORY

Test the data memory (SRAM), and the results will be shown on the screen. To stop and

exit the test, press [ESC].

Warning! The contents of the data memory (SRAM) will be wiped out after test.

8000 Series Mobile Computer Reference Manual

3.3.6 ECHO TEST

After a physical connection is established properly, run the utility “Echo Test” on your

computer and start this test on your mobile computer. Select a desired baud rate. To

stop and exit the test, press [ESC].

IR (Cradle-IR)

This echo test is to verify connectivity via IR between the mobile computer and any cradle.

MODEM

This echo test is to verify connectivity via modem. A telephone line must be connected to the

Modem Cradle.

Note: For the Modem Cradle, any value other than 57600 bps (default) must be

configured through the DIP switch on the IR control board.

Chapter 3 錯誤! 尚未定義樣式。

3.4 MEMORY

Here provides information and initialization function of the memory.

3.4.1 SIZE INFORMATION

 RAM — onboard SRAM for data memory

 Flash — program memory

3.4.2 INITIALIZE

Initialize the data memory.

Warning! The contents of the data memory (SRAM) will be wiped out after memory

initialization.

8000 Series Mobile Computer Reference Manual

3.5 POWER

Here shows current voltage consumption.

Main (battery)

It shows dynamic status of the battery pack, which is used as the main power source.

Backup (battery)

It shows dynamic status of the button cell, which is used to retain data in SRAM.

Warning! Always examine the battery icon on the device screen so that you will be

alerted for a low battery condition.

Chapter 3 錯誤! 尚未定義樣式。

3.6 LOAD PROGRAM

Here you can access the Load Program service provided by the kernel. Because the

kernel will take over the job, you will not be able to return to the System Menu by

pressing [ESC]. After downloading, restart the mobile computer to activate the new

program.

.SHX Program Download one of the following C program files and/or one font file:

Program File  AG Runtime (U*.shx)

 CipherNet Runtime (80xx-5250.shx, 80xx-VT.shx)

 BASIC Runtime* (BC*.shx)

 User program

Font File Refer to the Font Files folder on CD-ROM.

If you have downloaded a BASIC Runtime program, the next time you enter the Load

Program submenu you will be able to select whether to download a C program (.SHX) or

BASIC program (.SYN).

Note: (1) The interface option “Bluetooth” is only available on 8061/8062.

(2) “Load Basic” menu is only available after you have downloaded a BASIC

Runtime program.

8000 Series Mobile Computer Reference Manual

3.7 SERIAL PPP MENU

This submenu is for establishing a PPP connection via the Modem Cradle or any generic

modem. You must configure these parameters correctly.

Note: Point-to-Point Protocol (PPP) is a method of connecting the mobile computer to the

Internet over serial links. It sends TCP/IP packets to a server that connects to the

Internet.

 PPP Connection via IR

For baud rate setting, any value other than 57600 bps (default) must be configured

through the DIP switch of the IR control board on the Modem Cradle.

Note: The version of IR control board on the Modem Cradle must be greater than

SV3.01.

Chapter 3 錯誤! 尚未定義樣式。

3.7.1 INFORMATION

Information of library version can be viewed here.

Serial PPP Menu > 1. Information

LIB

BSC

C library version for PPP

BASIC Run-time version, if a BASIC application is downloaded.

Below are available libraries that support (1) PPP connection over serial links (2) Ethernet

connection – Transparent mode.

Series Model # External Libraries

8000 (batch) 80PPP.lib

8001 (batch) 80PPP.lib

8061/8062 (Bluetooth) 80PPP.lib OR 80BNEP.lib

8000

8071 (802.11b/g) 80PPP.lib OR 80WLAN.lib

8000 Series Mobile Computer Reference Manual

3.7.2 CONNECTION SET

DialUp Number

Enter the number provided by your ISP.

Enter the login name provided by your ISP.

Enter the login password provided by your ISP.

Baud Rate

Select a desired baud rate.

Note: By default, the baud rate is set to 57600 bps on the Modem Cradle.

For any other value, such as 115200/38400/19200/9600, you must configure

through the DIP switch on the IR control board.

Chapter 3 錯誤! 尚未定義樣式。

3.7.3 ECHO TEST

This echo test is used for verifying connectivity via Point-to-Point Protocol. For the

Modem Cradle, its physical connectivity can be verified in System Menu > Tests >

Echo Test > IR or MODEM.

Enter the IP address of a server with which a PPP connection is desired. Then, it will try

to connect to the server.

Note: After the “PPP via IR” connection is established properly, run the utility “Echo Test”

on your computer (TCP/IP – Server), and then, start this test on your mobile

computer.

8000 Series Mobile Computer Reference Manual

3.8 IR NETWORK MENU (ETHERNET VIA IR)

This submenu is for Ethernet connection via IR networking. You must configure these

parameters correctly.

Note: The Ethernet Cradle is required for establishing Ethernet connection via IR.

Chapter 3 錯誤! 尚未定義樣式。

3.8.1 INFORMATION

Information of Ethernet network configuration can be viewed here.

IR Network Menu > 1. Information

DHCP DHCP server in use or not

IP IP address of the mobile computer

Mask Subnet Mask

Gate Default Gateway

Note: For Transparent mode, refer to Serial PPP Menu for available libraries.

8000 Series Mobile Computer Reference Manual

3.8.2 NETWORK SETTING

Set parameters for IP networking.

DHCP

Options - Enable or Disable

Subnet Mask

Enter a new Mask IP, if necessary.

Local IP Address

Enter a new address for the mobile computer, if necessary.

Default Gateway

Enter a new address for the default Gateway, if necessary.

DNS Server

Enter a new address for the DNS server, if necessary.

Domain Name

The domain name of the host is displayed when DHCP server is enabled.

Note: Normally, DHCP is enabled and all of the settings can be obtained form the DHCP

server.

Chapter 3 錯誤! 尚未定義樣式。

3.8.3 ECHO TESTS

The Ethernet Cradle supports three working modes:

 Data Mode

 Modem Mode

 Transparent Mode

These echo tests are used for verifying connectivity via the Ethernet Cradle. For details,

refer to the Ethernet Cradle manual.

Data Mode

Set the Ethernet Cradle in Data mode. The mobile computer works as a client.

Modem Mode

Set the Ethernet Cradle in Modem mode. The mobile computer works as a client.

Transparent Mode

1. Client Mode - Set the mobile computer as a client.

Enter the IP address of a server with which a connection is desired.

2. Server Mode - Set the mobile computer as a server that waits for other devices to connect to.

Note: After the “Ethernet via IR” connection is established properly, run the utility “Echo

Test” on your computer (TCP/IP – Server or Client), and then, start this test on

your mobile computer.

8000 Series Mobile Computer Reference Manual

3.9 BLUETOOTH MENU — 8061/8062

This submenu is for the built-in Bluetooth module to work with other Bluetooth enabled

devices. You must configure these parameters correctly.

Note: This submenu is generated only when the Bluetooth module is present.

Bluetooth Settings Default Value SPP DUN PAN

Connect Setting Items Need to Be Checked

Local Name

Remote Name

Broadcast Me

Power Saving

BT-GPRS AP Name

Model no. + Serial no.

---

Enabled

---

(v)*

---

Security

Authentication

PIN Code

Disabled

---

Network Setting

DHCP

SubNet Mask

Local IP Address

Default Gateway

DNS Server

Domain Name

Enabled

255.255.128.0

0.0.0.0

---

Note: GPRS AP name is ONLY required for DUN-GPRS mode.

Chapter 3 錯誤! 尚未定義樣式。

3.9.1 INFORMATION

Information of network configuration can be viewed here.

Bluetooth Menu > 1. Information

LIB C library version for Bluetooth (BNEP)

MAC MAC ID of the Bluetooth module

ID A name given to the mobile computer for identification.

 By default, it is made up of model No. and the serial number. (Identical to 2.

Connect Set > 1. Local Name)

CTY  "Normal" means all 79 channels are available for frequency-hopping

(There are bandwidth limitations for 2.4 GHz ISM band in some countries. For

example, only 23 RF channels are defined instead of 79 RF channels in Japan, Spain

and France.)

DHCP DHCP server in use or not

IP IP address of the mobile computer

Mask Subnet Mask

Gate Default Gateway

8000 Series Mobile Computer Reference Manual

3.9.2 CONNECT SETTING

A basic Bluetooth system can be configured as (1) point to point - DUN mode, and (2)

point to multi-point - SPP or PAN mode.

Set the following parameters if necessary.

Local Name

Enter a name for identifying the mobile computer.

 By default, it is made up of model No. and the serial number.

Remote Name

Enter a name for making a specific connection.

 The remote name must be one of those in the Freq. Dev. List. Otherwise, the mobile computer

will fail to make a connection with any device without pairing.

 DO NOT specify any remote name when roaming across different groups of APs is required.

Broadcast Me

Options - Enable or Disable

 For initial connection, broadcasting must be enabled so that other Bluetooth devices can

discover the mobile computer.

 For security concerns, you may disable it in future use to hide the mobile computer from other

Bluetooth devices.

Power Saving

This refers to the low power consumption mode.

Options - Enable or Disable (Only the Sniff mode is supported.)

BT-GPRS AP Name

For DUN-GPRS mode, enter the AP name for connecting to the content server.

Chapter 3 錯誤! 尚未定義樣式。

3.9.3 SECURITY

Set or modify security parameters.

Authentication

Options - Enable or Disable

PIN Code

Define the encryption key values.

 Up to 16 characters, using ASCII code.

Note: When authentication is enabled without providing a pre-set PIN code, the mobile

computer supports dynamic input of PIN code during pairing.

8000 Series Mobile Computer Reference Manual

3.9.4 ECHO TESTS

These echo tests are used for verifying connectivity to make sure the mobile computer is

within coverage. Press [ESC] to stop and exit the test.

In PAN mode, the echo test helps measure the coverage of the range, estimate the

number of APs and mobile computers needed, and determine the topology of deploying

APs.

 SPP: Serial Port Profile

It is used for ad hoc networking, without going through any access point.

 DUN: Dial-Up Networking Profile

DUN Modem - It makes use of a Bluetooth modem or mobile phone as a

wireless modem.

DUN GPRS – It makes use of a mobile phone with GPRS functionality and

connects to GPRS AP.

 BNEP: Bluetooth Network Encapsulation Protocol

It is used by Personal Area Networking Profile (PAN) for IP networking over

Bluetooth.

SPP Master

 Set the mobile computer as a master device.

1. Pairing with your computer (slave) must be completed first.

2. Run the Echo Test program on your computer. Associated settings include

- Select “RS-232” for interface.

- Use the Bluetooth COM port that has been paired.

- Set Action Mode to “Passive”.

3. Start the echo test on both ends. The mobile computer will try to connect to PC (slave).

SPP Slave

Set the mobile computer as a slave device.

1. Enable Authentication and set your PIN code on the mobile computer.

2. Run the Echo Test program on your computer. Associated settings include

- Select “RS-232” for interface.

Chapter 3 錯誤! 尚未定義樣式。

- Use the Bluetooth COM port that has been configured as “outgoing”.

- Set Action Mode to “Passive”.

3. Start the echo test on both ends.

4. The mobile computer will wait for PC (master) to start the connection.

5. Enter the preset PIN code for authentication on your computer.

DUN Modem

 The mobile computer will try to connect to a Bluetooth modem or mobile phone.

1. Pairing with your mobile phone must be completed first.

Select “DialUp Network” for Target Machine options.

2. Run the Echo Test program on your computer. Associated settings include

- Select “Modem” for interface.

- Set Action Mode to “Passive”.

3. Start the echo test on both ends.

4. The mobile computer will connect to your mobile phone that dials up to your computer.

DUN GPRS

 The mobile computer will try to connect to a mobile phone with GPRS functionality.

1. Pairing with your mobile phone must be completed first. Select “DialUp Network” for Target

Machine options.

2. Run the Echo Test program on your computer. Associated settings include

- Select “TCP/IP – Server” for interface.

- Set Action Mode to “Passive”.

3. Start the echo test on both ends.

4. Enter the server IP on the mobile computer.

5. The mobile computer will connect to your mobile phone that dials up a GPRS AP, and finally

connect to your computer (server) through the GPRS AP.

BNEP Client

Set the mobile computer as a client. Enter the IP address of a server with which a connection is

desired. Then, it will try to connect to an AP.

1. Pairing with an AP must be completed first. Select “Access Point” for Target Machine options.

Note that you must disable Authentication and clear the preset PIN code when connecting to

Bluetooth AP (3560).

2. Run the Echo Test program on your computer. Associated settings include

- Select “TCP/IP – Server” for interface.

- Set Action Mode to “Passive”.

3. Start the echo test on both ends.

4. Enter the server IP and port number on the mobile computer.

8000 Series Mobile Computer Reference Manual

BNEP Server

Set the mobile computer as a server. It will try to connect to an AP.

1. Pairing with an AP must be completed first. Select “Access Point” for Target Machine options.

Note that you must disable Authentication and clear the preset PIN code when connecting to

Bluetooth AP (3560).

2. Run the Echo Test program on your computer. Associated settings include

- Select “TCP/IP – Client” for interface.

- Enter Remote IP and port number.

- Set Action Mode to “Passive”.

3. Start the echo test on both ends.

Chapter 3 錯誤! 尚未定義樣式。

3.9.5 PAIRING TEST

The pairing procedure is for the creation and exchange of a link key between two

Bluetooth-enabled devices. The devices use the link key for future authentication when

exchanging information.

1) The mobile computer will start with making an inquiry so that the system can

generate a list of device(s) that has been discovered nearby.

2) Select a desired target device.

3) Select a Bluetooth service from the “Target Machine” menu. To stop and exit the test,

press [ESC].

 Serial Port (SPP)

 Access Point (PAN)

 DialUp Network (DUN)

After pairing successfully, the target device will be added to the Frequent Device List

for quick connection in the future.

Note: During the initial setting of Bluetooth wireless network, the pairing procedure must

be carried out before the Echo tests.

8000 Series Mobile Computer Reference Manual

3.9.6 FREQ. DEV. LIST

The Frequent Device List is used to store a list of target device(s) that the mobile

computer has been connected to lately. After each successful pairing, the system will

update the list.

Note: To unpair any device, simply delete the device from this list.

This list can show information of up to eight target devices that provides different

Bluetooth services.

 It can list only one device that provides the Bluetooth Serial Port service. (SPP)

 It can list up to eight APs that provide the Bluetooth Personal Area Networking service.

(PAN)

 It can list only one device that provides the Bluetooth Dial-Up Networking service.

(DUN)

Note: During roaming (for PAN only) or re-establishing the connection, the mobile

computer will automatically connect to the listed AP(s) or target device without

going through the pairing procedure.

Chapter 3 錯誤! 尚未定義樣式。

3.9.7 NETWORK SETTING

Set parameters for IP networking.

DHCP

Options - Enable or Disable

Subnet Mask

Enter a new Mask IP, if necessary.

Local IP Address

Enter a new address for the mobile computer, if necessary.

Default Gateway

Enter a new address for the default Gateway, if necessary.

DNS Server

Enter a new address for the DNS server, if necessary.

Domain Name

The domain name of the host is displayed when DHCP server is enabled.

Note: Normally, DHCP is enabled and all of the settings can be obtained form the DHCP

server.

8000 Series Mobile Computer Reference Manual

3.10 WI-FI MENU — 8071

This submenu is for 802.11b/g wireless networking. You must configure these

parameters correctly.

Note: This submenu is generated only when the Wi-Fi module is present.

Wi-Fi Settings Default Value Ad-hoc Infrastructure

Network Setting Items Need to Be Checked

DHCP

SubNet Mask

Local IP Address

Default Gateway

DNS Server

Domain Name

Enabled

255.255.128.0

0.0.0.0

---

WLAN Setting

Local Name

SS ID

System Scale

Power Saving

Preamble

Ad-Hoc

Model no. + Serial no.

---

Medium

Enabled

Long

Disabled

---

Security

Authentication

WEP Menu

EAP Menu

WPA Menu

Open System

Disabled

---

Chapter 3 錯誤! 尚未定義樣式。

3.10.1 INFORMATION

Information of network configuration can be viewed here.

Wi-Fi Menu > 1. Information

LIB C library version for WLAN (802.11b/g)

Ver Firmware version of the module chipset

MAC MAC ID of the 802.11b/g module

ID A name given to the mobile computer for identification.

 By default, it is made up of model No. and the serial number.

(Identical to 3. WLAN Setting > 1. Local Name)

DHCP DHCP server in use or not

IP IP address of the mobile computer

Mask Subnet Mask

Gate Default Gateway

8000 Series Mobile Computer Reference Manual

3.10.2 NETWORK SETTING

Set parameters for IP networking.

DHCP

Options - Enable or Disable

Subnet Mask

Enter a new Mask IP, if necessary.

Local IP Address

Enter a new address for the mobile computer, if necessary.

Default Gateway

Enter a new address for the default Gateway, if necessary.

DNS Server

Enter a new address for the DNS server, if necessary.

Domain Name

The domain name of the host is displayed when DHCP server is enabled.

Note: Normally, DHCP is enabled and all of the settings can be obtained form the DHCP

server.

Chapter 3 錯誤! 尚未定義樣式。

3.10.3 WLAN SETTING

Wireless networking can operate in two modes – (1) Ad-hoc mode: peer-to-peer, and (2)

Infrastructure mode: point to multi-point through access points.

Set the following parameters.

Local Name

Enter a name for identifying the mobile computer.

 By default, it is made up of model No. and the serial number.

SS ID

This refers to Service Set ID or Identifier.

 The mobile computer can ONLY communicate with access points that have the same SS ID.

System Scale

This refers to Access Point Density.

Options - [1] Low [2] Medium [3] High

 The value you set must match that set for the access point.



“

Low / Medium / High” means the mobile computer will search for other APs only when data

transmission rate is below “1 / 2 / 5” Mbps individually.

Power Saving

This refers to the low power consumption mode.

Options - Enable or Disable

 The value you set must match that set for the access point.

Preamble

Options - [1] Long [2] Short [3] Both

 The value you set must match that set for the access point.

Ad-Hoc

This refers to peer-to-peer mode, without going through access points.

Options - Enable or Disable

8000 Series Mobile Computer Reference Manual

3.10.4 SECURITY

Set or modify security parameters.

 WEP: Wired Equivalent Privacy

 EAP: Extensible Authentication Protocol

 WPA: Wi-Fi Protected Access

Authentication

[1] Open System

[0] Share Key

 Default authentication type

 This requires implementing WEP key.

WEP Menu

WEP Setting  Enabled (For Share Key, it must be enabled!)

 Disabled (default)

WEP Key Length  64 bits

 128 bits (default)

Default Key WEP KEY1

WEP Key Enter WEP Keys 1 ~ 4 in one of the following input data type:

 ASCII (up to 13 characters)

 Hexadecimal (up to 26 characters)

EAP Menu

EAP Setting  Enabled

 Disabled (default)

EAP ID Enter a user name (up to 32 characters)

EAP Password Enter a password (up to 32 characters)

WPA Menu

WPA Setting  Enabled

 Disabled (default)

WPA Passphrase Enter a phrase as your password (8 ~ 63 characters)

Chapter 3 錯誤! 尚未定義樣式。

3.10.5 ECHO TESTS

This function is used to measure the coverage of the range, estimate the number of APs

and mobile computers needed, and determine the topology of deploying APs.

Client Mode

Set the mobile computer as a client. Enter the IP address of a server with which a connection is

desired. Then, it will try to connect to an AP.

1. Run the Echo Test program on your computer. Associated settings include

- Select “TCP/IP – Server” for interface.

- Set Action Mode to “Passive”.

2. Start the echo test on both ends.

3. Enter the server IP and port number on the mobile computer.

Server Mode

Set the mobile computer as a server. The mobile computer will try to connect to an AP.

1. Run the Echo Test program on your computer. Associated settings include

- Select “TCP/IP – Client” for interface.

- Set Action Mode to “Passive”.

2. Start the echo test on both ends.

Note: Run the utility “Echo Test” on your computer (TCP/IP – Server or Client), and start

this test on your mobile computer.

8000 Series Mobile Computer Reference Manual

While running echo tests, if WPA setting is enabled for security, the SSID and Passphrase

will be processed to generate a pre-share key.

Note: If you change the SSID or Passphrase, it will have to re-generate a pre-share key.

1) For initial association with an access point, you will see an antenna icon developing

on the screen to indicate that the mobile computer is processing a pre-share key.

2) After having generated the pre-share key, the mobile computer proceeds to establish

a connection with an access point, and you will see the whole antenna is flashing.

3) When the mobile computer has been connected to the access point successfully, you

will see the whole antenna and the indication of wireless signal strength.

Note: If you are programming in C or BASIC, be aware that these icons will appear on

the device screen after NetInit() or START TCPIP() is called. (WPA must be

enabled first!)

Chapter 3 錯誤! 尚未定義樣式。

Once the connection of echo test is established, the details will be displayed as illustrated

below. Link Quality (“Q”) will be the most important element while the others are for

your reference.

Q (Link Quality) T (Transmit Speed) S (Signal Level) N (Noise Level)

0 ~ 10

10 ~ 15

15 ~ 30

50 ~ 80

Very Poor

Poor

Good

Very

Good

5.5

Mbps

0 ~ 10

30 ~ 60

Over 60

Weak

Moderate

Strong

2 ~ 3

4 ~ 5

Weak

Moderate

Strong

8000 Series Mobile Computer Reference Manual

This chapter explains Program Manager and Kernel that manage multiple programs

and firmware upgrade.

IN THIS CHAPTER

4.1 Program Manager ...................................................... 65

4.2 Kernel ...................................................................... 70

4.1 PROGRAM MANAGER

The mobile computer supports multiple applications and languages. In the menu of

Program Manager, it allows storing up to seven programs and has one activated for the

current use.

If there is no application program exists, the Program Manager will be displayed after

you turn on the mobile computer.

Warning! The Program Manager menu is provided for managing programs in an

administrative level.

How to access the Program Manager menu?

1) Turn off the mobile computer.

2) Press [8] + [Power].

Chapter 4

PROGRAM MANAGER & KERNEL

8000 Series Mobile Computer Reference Manual

4.1.1 DOWNLOAD

Here provides a full list of programs that are currently stored on the mobile computer

with size information. Multiple application programs can be downloaded through a variety

of interfaces. Upon completion of downloading, you are allowed to input a name for the

program. If there is no need to rename the program, simply press [ENTER] to leave as it

is.

The length of program name can be up to 12 characters, however, only 9 characters can

be displayed. Program size is in kilo bytes.

A suffix letter after the memory sector (1 ~ 6) indicates the file type of program.

 “b” for BASIC program (.SYN)

 “c” for C program (.SHX)

 “f” for font file (.SHX)

Note: In addition to the system font, there can be only one font file downloaded to the

mobile computer. The custom font file needs to be downloaded through the

System Menu or Kernel Menu.

Chapter 4

錯誤! 尚未定義樣式。

SPARE MEMORY SECTORS (1 ~ 6)

Additional program files can be directly downloaded to these sectors.

Download a program file to an empty sector:

1. Select an empty sector by pressing the corresponding number and then [Enter].

2. Select a desired baud rate for downloading.

3. Connect the RS-232 cable and wait for a few seconds to establish a connection…

4. To abort the action, press [ESC]. Then press [ESC] again to return to the menu.

Download a program file to an occupied sector:

If no available sectors, you'll have to replace one program with the new one.

1. Select a program that you want to delete by pressing the corresponding number and

then

[Enter].

2. The program information is displayed on the screen.

Press [FN/ALPHA] to enter the Alpha mode, and then press [C].

3. Select a desired baud rate for downloading.

4. Connect the RS-232 cable and wait for a few seconds to establish a connection…

5. To abort the action, press [ESC]. Then press [ESC] again to return to the menu.

From the menu, you'll find the program is deleted but no new program is present.

If you simply want to delete a program, press [D] in step 2.

Note: [C], [D] are NOT case-sensitive.

ACTIVE MEMORY SECTOR (“ACT”)

Only the application program, which needs to be activated immediately, can be

downloaded to the active memory sector.

Download to Memory Sector “ACT”:

1. Press the [Down] key to select the memory sector “ACT” (may be unoccupied), and then press

[Enter].

2. Connect the RS-232 cable and wait for a few seconds to establish a connection…

3. If the active memory sector has already been occupied by an application program, the newly

downloaded program will replace the currently active program and come into effect immediately.

8000 Series Mobile Computer Reference Manual

4.1.2 ACTIVATE

The list shows the entire spare programs stored on the mobile computer. From the list,

you can select from 1 to 6 and activate one of them. The selected program will be copied

to the active memory sector and replace the current one.

Note: A font file cannot be activated.

TO CLEAR FILE SYSTEM

When <New Program Start> screen appears, “Press [ESC] to clear file” means the file

system in the SRAM will be cleared out by pressing [ESC]. Then there will be no data

(transactions, settings, etc.) stored on the mobile computer when the new program

comes into effect.

TO KEEP FILE SYSTEM

To keep the data, simply press any other key.

Chapter 4

錯誤! 尚未定義樣式。

4.1.3 UPLOAD

You may duplicate one or all of the programs from the mobile computer to a host

computer or another mobile computer. This can be used to clone software on mobile

computers.

Note: To clone all of the programs, the target mobile computer cannot have any other

program downloaded except the active one; that is, Memory Sectors 1~6 must be

empty!

The procedures are similar to those for downloading programs.

8000 Series Mobile Computer Reference Manual

4.2 KERNEL

The kernel resides in the innermost core of the system. It has the highest security and is

always protected by the system. When the application program is corrupted and the

System Menu fails, the Kernel Menu provides an access to fix the system.

Warning! The Kernel Menu is NOT for the use of any end users.

How to access the Kernel Menu?

1) When the last session is in the System Menu or Program Manager, simply turn off

the mobile computer. Otherwise, you must reload the battery pack.

2) Press [1] + [7] + [Power].

4.2.1 KERNEL INFORMATION

Here provides important system information to help diagnose the system.

Kernel Menu > 1. Information

H/W Hardware version (PCB)

S/N Serial number of the mobile computer

M/D Manufacturing date

KNL Kernel version

DEV 5-digit code for optional hardware configurations

Refer to Understanding Device Code.

Chapter 4

錯誤! 尚未定義樣式。

4.2.2 LOAD PROGRAM

You can download one program file to the active memory sector, as well as one font file

to the memory address assigned by the system. After downloading, restart the mobile

computer to activate the new program.

 New application program or program update

 And/or one font file, i.e. multi-language font

If you are using a custom font file rather the system font and you want to download

another font file, it is necessary to delete the current font file from the program list

displayed by the Program Manager first. Otherwise, downloading new font file is not

allowed.

.SHX Program Download one of the following C program files and/or one font file:

Program File  AG Runtime (U*.shx)

 CipherNet Runtime (80xx-5250.shx, 80xx-VT.shx)

 BASIC Runtime* (BC*.shx)

 User program

Font File Refer to the Font Files folder on CD-ROM.

If you have downloaded a BASIC Runtime program, the next time you access the Load

Program service through the System Menu, you will be able to select whether to

download a C program (.SHX) or BASIC program (.SYN).

Note: To download a BASIC program (*SYN), go to System Menu > 6. Load Program

> 2. Load Basic.

SETTINGS

Interface

Cradle-IR (Serial IR) Proceed to configure baud rate settings on your computer and the

mobile computer.

IrDA Point to the target IrDA device.

Bluetooth Approach the target Bluetooth enabled device.

8000 Series Mobile Computer Reference Manual

Baud Rate

115200 (bps) Supported on CipherLab software, including download utilities.

76800 (bps) N/A

57600 (bps) Supported on CipherLab software, including download utilities.

38400 (bps) Supported on CipherLab software, including download utilities.

19200 (bps) Supported on CipherLab software, including download utilities.

9600 (bps) Supported on CipherLab software, including download utilities.

4800 (bps) N/A

2400 (bps) N/A

Note: If you select to use Serial IR of the Modem Cradle, any value other than 57600

bps (default) must be configured through the DIP switch on the IR control board.

LOAD PROGRAM VIA BLUETOOTH

1) Go to System Menu > Bluetooth Menu > 3. Security, and configure the following

Bluetooth settings first.

 Authentication

 PIN code

2) Go to System Menu > 6. Load Program and select Bluetooth.

3) Start the pairing procedure from your computer, for example, click [Pair Device]

and/or [Connect Bluetooth Serial Port].

4) Run any of the download utilities: ProgLoad.exe or Download.exe

- Select interface RS-232/IrDA for using Bluetooth SPP.

- Select COM port properties that match with the serial port settings used on your

computer.

Note: The interface option “Bluetooth” is only available on 8061/8062.

Chapter 4

錯誤! 尚未定義樣式。

4.2.3 KERNEL UPDATE

The kernel might need to be updated to improve performance or due to other

considerations.

 To download a kernel update (K*.shx), the procedure is the same as that for

downloading a program.

 Any attempt to download an older version will be rejected.

 The system will restart itself right after downloading.

Warning: Do not turn off the mobile computer while downloading a kernel update or

re-starting the mobile computer. Otherwise, it will crash the kernel forever.

There is no way to recover it!

Note: (1) CipherLab software, including download utilities, supports the following baud

rate options: 115200/57600/38400/19200/9600 bps.

(2) The interface option “Bluetooth” is only available on 8061/8062.

4.2.4 TEST & CALIBRATE

These tools are provided for manufacturing use.

Warning! You should not perform any of these tests.

8000 Series Mobile Computer Reference Manual

4.2.5 BLUETOOTH MENU — 8061/8062

This submenu is the same as the one under the System Menu except for the following

items:

 "2. Connect Set > 5. BT-GPRS AP Name" is not provided.

 "4. Echo Tests" is provided with SPP options only.

 "7. Network Setting" is not provided.

Note: This submenu is generated only when the Bluetooth module is present.

Model Designation 8000 8001 8020 8021 8061

8062

8071

IR/IrDA √ √ √ √ √ √

Bluetooth Class 1 – – – – √ –

Wireless

Communications

802.11b/g – – – – – √

Wireless Coverage 30 cm 30 cm 30 cm 30 cm 250 m 350 m

Acoustic Coupler – – √ √ – –

CCD  Light source: linear imager, 650 nm red LED

 Scan rate: 100 scans per second

 Reading range*: 3 ~ 29 cm

Barcode Reader

Laser  Light source: visible laser diode

 Scan rate: 100 scans per second

 Reading range*: 1 ~ 45 cm (scan angle 47°)

Main Battery  8000/8020: 2*AAA Alkaline batteries

 8001/8021/8061/8062/8071: Rechargeable Li-ion

battery 3.7 V, 700 mAh

Laser, one scan per 5 seconds: Working Time

100 hr

– – 36 hr 20 hr

Electrical

Characteristics

Backup Battery  Rechargeable Lithium button cell – 3.0 V, 7 mAh

 Data retention – at least 30 days

CPU 16-bit Toshiba CMOS type, low power consumption

Memory  Program memory – 2 MB flash

 Data memory – 2 MB onboard SRAM

Display Graphic LCD, 100 x 64 pixels, FSTN with LED

backlight programmable

 Font size 6x8: 16 characters by 8 lines

 Font size 8x16: 12 characters by 4 lines

Keypad 21 rubber keys, LED backlight programmable

Indicators  LED – Dual-color (red/green), programmable

 Buzzer – Low power transducer type, 1 KHz to 4

KHz, programmable

Enclosure Material Rubber & ABS plastic

Physical

Characteristics

Dimensions (mm)

(L)

(W)

122

143

SPECIFICATIONS

8000 Series Mobile Computer Reference Manual

(H) 26 32 35

Weight (Laser and

battery included)

123 g 120 g – – 125 g 166 g

Temperature Operating :

Storage:

-10 °C to 60 °C

-20 °C to 70 °C

Humidity Operating :

Storage:

10% to 90% non-condensing

5% to 95% non-condensing

Impact Resistance 1.2 m, 5 drops per 6 sides

Electrostatic

Discharge

± 15 kV air discharge, ± 8 kV direct discharge

Environmental

Characteristics

EMC Regulations  8000/8001: FCC, IC, CE, C-Tick, BSMI

 8061/8062: FCC, IC, CE, C-Tick, TELEC

 8071: FCC, IC, CE, C-Tick, NCC, BSMI, TELEC,

MIC, SRMC

Development Tools

C and BASIC Programming

Software & Utilities

Windows-based Application Generator (AG), AG

utilities;

Windows-based CipherNet for VT100/220, IBM 5250

emulation;

Download utilities, testing tools, etc.

Accessories  Spare rechargeable battery pack

 4-slot Battery Charger

 Communication Cradle

 Charging & Communication Cradle

 Modem Cradle (56 K)

 Ethernet Cradle (10/100 BASE-T)

 GPRS Cradle

 308 USB Virtual COM Interface (convert RS-232

to USB)

 Bluetooth Access Point

 802.11b/g Access Point

Note: The reading range of barcode scan engine depends on barcode resolution, ambient

light, etc.

For easy development of applications, the mobile computer ships with development tools

on the CD-ROM. It includes Windows-based Application Generator programs, batch

and WLAN, as well as download utilities.

The download utilities are provided for you to download a program (*.SHX or *.SYN) to

the mobile computer. Currently, the program ProgLoad.exe has replaced several

previously released utilities as shown below.

 Download.exe : to download a *.SHX file

 IRLoad.exe : to download a *.SHX file

 SynLoad.exe : to download a *.SYN file

Programs can be as follows —

Program Type System Menu Kernel Menu Program

Manager

AG Runtime U*.SHX √ √ √

CipherNet

Runtime

80xx-VT.SHX

80xx-5250.SHX

√ √ √

BASIC Runtime BC*.SHX √ √ √

BASIC program *.SYN √ − −

Font file For example,

Font-Multi-Language.

SHX

√ √ −

Kernel update K*.SHX − √ −

Appendix I

DOWNLOAD UTILITIES

8000 Series Mobile Computer Reference Manual

PROGLOAD.EXE

This all-in-one utility supports all the file types and communications interfaces. Run the

program on your computer. The following dialog box pops up.

Communication Type

RS-232/IrDA Connection via direct RS-232 cable, IrDA port, or Bluetooth SPP

(= Download.exe)

Serial IR Connection via cradle (= IRLoad.exe)

TCP/IP Connection over networks (Not supported currently!)

File Type

.SHX file Any C program, such as AG Runtime, Basic Runtime, font file, etc.

.SYN file Any Basic program after Basic Runtime has been installed first.

Click to select Comm

type, COM port, and

Baud rate.

hoose

our

ile…

Appendix I 錯誤! 尚未定義樣式。

IRLOAD.EXE

This utility is provided when you establish a connection via the cradle.

1) Run the program on your computer.

2) Choose a .SHX file.

3) Select COM port properties.

COMMAND LINE

It also supports command line arguments. For example,

IRLOAD U8000-114.SHX,2,1//COM2,115200 bps

If command line arguments are not given, the user can select appropriate parameters

from the pop-up dialog box.

IRLOAD [filename],[COM port],[Baud rate]

File name: The file name of the program that is to be downloaded.

COM port: 1 ~ 8 Default: 1

Baud rate: 1 ~ 5 1 for 115200 bps

2 for 57600 bps

3 for 38400 bps

4 for 19200 bps

5 for 9600 bps

Default: 1

8000 Series Mobile Computer Reference Manual

DOWNLOAD.EXE

This utility is provided when you establish a connection via serial interface, such as a

direct RS-232 cable, IrDA port, or Bluetooth SPP.

1) Run the program.

2) Choose a .SHX file.

3) Select COM port properties.

COMMAND LINE

It also supports command line arguments.

The mobile computer cannot be turned on when you press the POWER key…

 Make sure the battery pack is installed properly.

 Re-charge the battery inside the mobile computer and monitor the charging status. (see 3.5)

 If the battery is faulty, replace it with a fresh and fully charged battery then.

Charging error…

 Make sure the power cord is well connected between the cradle/charger and an outlet.

 Check if the battery contacts of the battery itself and the battery compartment are clean.

 Try to re-charge the battery and monitor the charging status.

Warning! Only use batteries or charging device manufactured by CipherLab. The use

of wrong battery or charging device could result in damage to human body

or the product itself, and will void your warranty.

The keyboard input seems not working properly…

 Perform the keyboard test. (see 3.3.4)

 If the problem persists, slide the battery latch to reload the battery pack. Then perform the test

again.

The reader does not scan…

Low battery —

 Check if the battery icon on the screen indicates a low battery status. If so, replace it with a

fresh battery then.

 If the problem persists, check if the battery contacts get dirty or the battery pack does not fit

to the compartment.

Regarding the barcode —

 Perform the reader test to see if the reader is working. . (see 3.3.1)

 If the problem persists, slide the battery latch to reload the battery pack. Then perform the test

again.

Appendix II

TROUBLESHOOTING

8000 Series Mobile Computer Reference Manual

The reader does not decode after scanning…

Unreadable barcode —

 Check if the barcode is defaced. A defaced barcode may not be readable.

Un-programmed to read —

 Check if the scanner is programmed to read the symbologies (types of barcode) that you are

trying to read.

 Try scanning a test barcode of the symbology you are trying to read.

Dirty scan window —

 Check if the scan window gets dirty. Wipe it with a clean and dry cloth, and try again.

Out of scanning range —

 Try adjusting the scanning distance from the scanner to the barcode.

The mobile computer

cannot transmit/receive data to/from a host computer or other

devices…

Over IR port —

 Make sure the mobile computer's infrared port is pointed directly to the infrared port of another

IR device. The distance between the mobile computer

and a target device is within proper

range, and no obstacles in between. Try to establish connection again.

Via Bluetooth —

 Make sure the distance between the mobile computer

and a target device is within proper

range. Try to establish connection again.

 Check if the relevant settings are correct. (see 3.9)

 Check if the connection is working properly. (see 3.9)

Over RS-232 port via cradle —

 Check if the RS-232 connection is correct and secured.

 Make sure the serial port parameters on the host are configured to match the serial parameters

on the mobile computer. Try to establish connection again.

 Make sure the mobile computer is well seated inside the cradle. DO NOT remove the mobile

computer or disconnect the cradle before communications are done.

 If the problem persists, run the IR Echo Test to check the IR interface between the mobile

computer and the cradle. (see 3.3.6)

Appendix II 錯誤! 尚未定義樣式。

Over MODEM port via cradle —

 Check if the modem connection is correct and secured.

 Make sure the modem parameters are configured to match the parameters on the mobile

computer. Try to establish connection again.

 Make sure the mobile computer is well seated inside the cradle. DO NOT remove the mobile

computer or disconnect the cradle before communications are done.

 If the problem persists, run the IR Echo Test to check the IR interface between the mobile

computer and the cradle. (see 3.3.6)

About abnormal response…

The LED or LCD seems not working properly —

 Perform the LCD & LED test. (see 3.3.3)

 If the problem persists, reload the battery pack and perform the test again.

The buzzer seems not working properly —

 Perform the buzzer test. (see 3.3.2)

 If the problem persists, reload the battery pack and perform the test again.

The mobile computer seems not working properly —

 First upload all data to a computer, and then perform the memory test. (see 3.3.5)

 If the problem persists, reload the battery pack and perform the test again.

CipherLab 8062 BT barcode scanner User Manual 8062 Reference Manual v2 11

CipherLab Co., Ltd. BT barcode scanner 8062 Reference Manual v2 11

Manual

Navigation menu

Namespaces

Views

Navigation