Circuit Design NK24Y 2.4G Transceiver module User Manual OG NK 24Y v08e
Circuit Design, Inc. 2.4G Transceiver module OG NK 24Y v08e
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2657486 |
| Application ID | V0McgcD9MHas/Zzr5+p4og== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 20.31kB (253813 bits) |
| Date Submitted | 2015-06-25 00:00:00 |
| Date Available | 2015-06-25 00:00:00 |
| Creation Date | 2015-06-25 14:33:38 |
| Producing Software | DocuCom PDF Driver 9.00 |
| Document Lastmod | 2015-06-25 14:54:01 |
| Document Title | Microsoft Word - OG_NK-24Y_v08e |
| Document Creator | Microsoft Word - OG_NK-24Y_v08e |
| Document Author: | yasunaga |
OPERATION GUIDE Regulatory compliance information Regulatory Statement for FCC Instructions to the final system integrators The final system integrator must ensure there is no instruction provided in the user manual or customer documentation indicating how to install or remove the transmitter module. This module should be installed in the host device according to the interface specification. Labeling FCC ID: V9X-NK24Y The proposed FCC ID label format is to be placed on the module. If FCC ID is not visible when the module is installed into the system, “Contains FCC ID: V9X-NK24Y shall be placed on the outside of final host system. The following information must be indicated on the host device of this module. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. *If it is difficult to describe this statement on the host product due to the size, please describe in the User's manual. The following statements or equivalent must be described on the user manual of the host device of this module; Caution: Any changes or modifications not expressly approved by the party responsible for product compliance could void the user's authority to operate the equipment. This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. Caution: Exposure to radio frequency radiation This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment has very low levels of RF energy that are deemed to comply without testing of specific absorption rate(SAR). OG_NK24Y_v08e 11 Circuit Design, Inc. OPERATION GUIDE Regulatory Statement for IC Antenna This radio transmitter IC Number 6079A-NK24Y has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain and required antenna impedance for each antenna type indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. The antenna used this module is as follows; Antenna Type & Antenna Gain; Sleeve Antenna (ANT-2G4S2/ANT-2G4S3) 2.14 dBi Pattern antenna -2.0 dBi Instructions to the final system integrators The final system integrator must ensure there is no instruction provided in the user manual or customer documentation indicating how to install or remove the transmitter module. This module should be installed in the host device according to the interface specification. Labeling: IC Number: 6079A-NK24Y The proposed IC Number label format is to be placed on the module. If IC Number is not visible when the module is installed into the system, “Contains IC: 6079A-NK24Y” shall be placed on the outside of final host system. The following statements or equivalent must be described on the user manual of the host device of this module; This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. Caution: Exposure to Radio Frequency Radiation This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment and meets RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment has very low levels of RF energy that are deemed to comply without testing of specific absorption rate (SAR). Cet équipement est conforme aux limites d’ exposition aux rayonnements énoncées pour un environnement non contrôlé et respecte les règles d’ exposition aux fréquences radioélectriques (RF) CNR-102 de l’ IC. Cet équipement émet une énergie RF très faible qui est considérée conforme sans évaluation du débit d’ absorption spécifique (DAS). OG_NK24Y_v08e 12 Circuit Design, Inc.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Author : yasunaga Create Date : 2015:06:25 14:33:38+09:00 Modify Date : 2015:06:25 14:54:01+09:00 XMP Toolkit : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26 Producer : DocuCom PDF Driver 9.00 Creator Tool : Microsoft Word - OG_NK-24Y_v08e Metadata Date : 2015:06:25 14:54:01+09:00 Format : application/pdf Title : Microsoft Word - OG_NK-24Y_v08e Creator : yasunaga Document ID : uuid:0cc67af9-8193-4968-bf3e-de8dc640bc4b Instance ID : uuid:1a6e3cb6-ee37-47cd-80eb-b7ac5acb1b9b Page Mode : UseNone Page Count : 2EXIF Metadata provided by EXIF.tools