| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1895960 |
| Application ID | NVHdj10Cvk73oX/fbOxoNw== |
| Document Description | User Manual(final) |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 110.65kB (1383104 bits) |
| Date Submitted | 2013-02-07 00:00:00 |
| Date Available | 2013-08-06 00:00:00 |
| Creation Date | 2013-02-07 14:09:09 |
| Producing Software | PDF-XChange 3.60.0106 (Windows) |
| Document Lastmod | 2013-02-07 14:10:03 |
| Document Title | User Manual(final) |
Stellam
Digital Baby Video Monitor
‘ CAUTION: Keep small parks away from children.
CAUTION: Keep small mm away from children. This product cannot replace responsible adult supervision.
Strangulation Hazard: Children can become entangled in
cords. Power cords should be kept more than 3 feet away
from the crib and baby's reach at all times. Baby monitors and
Use oniy with provided power supply.
The socket-outlet she“ be installed near the equipment and
cameras with power cords should never be hung on or near shall be easily accessible.
the crib. RISK OF EXPLOSION IF BA'I'I'ERY IS REPLACED W AN
INCORRECT TYPE!
This product is riot a toy and should be kept out of
children's reach.
This product contains small parts. Exercise care when
unpacidng and assembling the product.
Dispose of used batteries according to the instructions.
Use only batteries/power supplies listed in the user manual.
V?) DD
bbbbbb
Read and Keep Instructions: All the safety and operating
instructions should be read before the video baby monitor
is operated.
Water and Moisture' This product is designed for indoor use only The unit should not be exposed to rain, moisture, dripping or splashing No
objects filled with liquid should be placed on top of, or beside the product, such as a glass or vase. This item should not be used near water.
Non-Use Periods: Always unplug the AC adapters from the wall outlets during long periods of non-use.
Ventilation: This baby monitor should not be used on a bed, sora, rug or similar suriace that may block the ventilation openings, or be placed in an
enclosed area, such as a bookcase or drawer that may impede air flow
Keep Away from Source: oi Heat: This unit should not be exposed to direct heat sources such as a candle, fireplace, radiator, heat register, stove
or other appliance that emiE heat. The unit should not be left in direct sunlight.
Power Souroe:This unit should only be used with the AC power adapters included in this package (rated 5.9V 1A]
Damage Requiring Servioez'l'his unit should be serviced by qualified personnel only when:
as Objects have fallen or liquid has been spilled into the product
b, The units have been exposed to rain
c. The units do not appearto operate normally orexhibits a distinct change in performance
d. The units have been dropped orthe enclosure damaged
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause undesired operation.
FCC WARNING
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful inerference to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or teLevision reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
. Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
. Connect the equipment into an outlet different from that to which the receiver is connected.
~ Consult the dealer or an experienced radio/TV technician for help.
IC STATHAENT / DECLARATION IC:
This Class B digital apparatus complies with ICES-003. / Cet appareil numerique de la classe B est conforme a la norme NMB»003 du Canada.
This device complies with Industry Canada licence-exempt RSS 210 standardlsi. Operation is subject to the following two conditions: (1)
this device may not cause interference, and l2) this device must accept any interference, including interference that may cause undesired
operation of the device.
Le pre'sent appareil est conforme aux CNR 210 d'lndustrie Canada applicables aux appareils radio exempts de licence. L'exploitation est
autorisée aux deux conditions suivantes 1 (1) l‘appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout
brouillage radioelectrique subi, meme si le brouillage est susceptible d'en compromettre le fonctionnement.
Changes or modifications not expressly approved by the party responsible for compliance could void the
user's authority to operate the equipment.
Levono Please visit our website at www.myLEVANA.com for information about your
product's warranty
We take quality very seriously. This is why all of our products come with a one-year warranty from the original purchase date against
defects in workmanship and materials. If you have warranty or support issues please contact us using any of the following methods:
Web: www.mylevana.com Support: www.mylevana.cornlsupport
LEVANA Canada LEVANA USA
4080 Montrose Road 60 Industrial Parkway #264
Niagara Falls, ON Cheektowaga NV
Canada L2H 1J9 USA 14227
WlmntyTenm
l. LEVANA‘E products are guaranteed for a period of one year from the date of purchase against defects in workmanship and materials.
This warranty is limited to the repair, replacement or refund of the purchase price at LEVANA‘s option.
2. This warranty becomes void if the product shows evidence of having been misused, mishandled or tampered with contrary to the
applicable instruction manual.
3. Routine cleaning, normal cosmetic and mechanical wear and tear are not covered under the terms of this warranty.
4. The warranty expressly provided for herein is the sole warranty provided in connection with the product itself and no other warranty,
expressed or implied is provided. LEVANA assumes no responsibilities for any other claims not specifically mentioned in this warranty.
5. This warranty does not cover the shipping cost, insurance or any other incidental charges.
6. You MUST contact LEVANA before sending any product back for repair. You will be sent a Return Authorization form with return
instructions. When returning the product for warranty service, please pack it carefully in the original box with all supplied accessories,
and enclose your original receipt or copy, and a brief explanation of the problEm (include RA 1*).
7. This warranty is valid only in Canada and the continental U.S.
8. This warranty cannot be re—issued.
SAFETY WARNINGS
FCC STATEMENT
WARRANTY ..
WHAT'S INCLUDED
BUTTONS AND CO
BU‘I'I'ONS AND CONNECTIONS » CAMERA
SETU P“
Battery installation
Connecting Power to the Monitor / Charging Battery
Connecting Power to the Camera
Screen Icons
OPERATION .
Turn the Monitor ON/OFF.
Pairing the Cameras 3 Mom 0
Placement of the Monitor.
Placement of the Camera.
Mounting the Camera on a Tabletop Safely
Mounting the Camera on a Wall Safely
Night Vision....
Adjusting the Camera Angle
Using the ZOOM Function
Volum
Usingt e a to a y
Selecting a Lullaby...
Setting the Lullaby Volume
Using PEEP Mode.
Changing the Cam .
Sound Sensitivity Settings.
Setting the Brightness
Contacting Customer Support
TROUBLESHOOTING
SPECIFICATIONS
oowwmxioxbww
,_.
...
mowwmmwwmmmmmmbuwummm
Pan/Tilt/Zoom Night Vision Camera
Baby Video Monitor
Rechargeable Battery
2 Power Adapters
Mounting Hardware
Quick Start Guide
1 Year Warranty
Lifetime Live Customer Support
ocean...
. \(5‘
a ...
ThIS producl is not a my
Thus product eontarns small parts Exercrse eare when unpackmg and assemalmg tne produet
Thls product does not replace resoonsrole adult supervlslan Check on your cnrld at regular Intervals and make sure your rnonrlor ls always
adequately charged.
LEVANA' does nol endorse any LEVANAW products lor rllegal artlvlllcs teyana rs nol responsrble or llahlc in any way lor any damage, yandalrsm, lhel,
or any otner actron that may occur wnrle a LEV/\NA'pmdurt rs In use ay tne purchaser
We reserve the right to change models. configuration. or specifications without notice or liability, Product may not be exactly as shown.
@2012 LEVANA' All rlgnts reserved LEVANA® me LEV/\NA' logo, Stella" and nlher LEVANA' marks may be registered All otnerTrademarksare tne
properly ol lhelr respeellye owners
—
zavmaF
\aLI—m — ——
11
1. LCD SCREEN 6. 'PAN I TILT BU'I'I'ON 11.
2.. MICRO_E 7. MENU 12.
3. POWER ONIOF'F 8. COLOR-CHANGING LED RING 13.
4- TALK T O BABYTM mFEHEEnges color With sound 14-
Press and hold Ko talk, release
to listen 9. DIRECTIONAL ARROWS I VOLUME
5. LOCK I UNLOCK BUTTON
Disables ALL function buttons in the 10. POWER INPUT
LOCK position
CONTROL 15-
SELECTION I ZOOM BU'I'I'ON
SPEAKER
TABLE STAND
ANTENNA
Extend K0 improve signal
BATTERY COMPARTMENT
in“.
* u o — 8 I — 9
4 w h/ \—/
1. PHOTO SENSOR 4. SPEAKER 7. ANTENNA
Z. PTZ CAMERA 5. INVISIBLE LEDS 6. POWER LED
3. MICROPHONE 6. POWERONIO'FF 9. POWERINPU'I'
LET’S GET STARTED! Battery
Battery Installation connectors
1. Gently remove the BA‘I'I'ERY COMPARTMENT COVER on the back of
the monitor.
-ld line up
2. Slide the BATTERY COMPARTM
Battery
connectors
® 9
3. Insert the battery: the battery c
with the connectors inside the
4. Slide the BA'I'I'ERY COMPARTM
I PEEP Mode: After 1 minute of inactivity, monitor enters standby/sleep mode
{K- Adjustable Brightness: Decreasing screen brightness will extend battery life.
6. For extended periods of non-use. please remove battery from baby monitor.
Connecting Power to the Monitor / Charging Battery
1. Connect the small end of one power adapter into the DC input on the side of the monitor as
shown in the diagram. Connect the other end of the adapter into an available wall outlet.
2. Press and hold the POWER (Dbutton on top of the monitor to turn the monitor ON.
3. The icon in the top right corner of the main screen will show you the battery power status.
4. The LED Ring on the front of the monitor also indicates the battery power status.
SOLl'D BLUE = BATTERY FULLY CHARGED SLow FLASHING BLUE = BA‘I'I'ERY CHARGING @\
QUICK FLASHING BLUE = BATTERY LOW FLASHING PINK = PAIRING UNSUCCESSFUL DC Input
"A
LED Ring
5. For safety reasons, ONLY use the adapters included in the package
EMPTY —> CHARGING FULL
D D ID III
Connecting Power to the Camera
1. Take the second power adapter and connect the small end of the power adapter into
the DC input on the side of the camera base. For safety reasons, ONLY use the adapters
included in the package. ONIOFF
Switch
2. On the side of the camera, slide the POWER switch (D I LEFI' to the ON position. The GK
POWER LED will light up.
V,
SIGNAL STRENGTH
NO 9 STRONG
SIGNAL SIGNAL
VISI‘I."IZ‘IEITIII
BATTERY STRENGTH
EMPTY —> CHARGING FULL
DDIDIlI-a
PEEPMODE
ON OFF LOW MED SENSITIVE
EEQEI'B‘
CAMERA
CAM CAM CAM CAM SEO
1 2 3 4 MODE
0' I z “- °~ m
TALK TO BABYT"
SUPPORT
SOUND SENSITIVITY SETI'ING
OFF LOW MEDIUM HIGH
00.0:Oi
VOLUME
OFF —> LOUD
1x :1: 1» 1») 1)»)
BRIGHTNESS
DARK —> BRIGHT
fifi¢¥fi
PAIRING CAM CAM CAM CAM
1 2 3
D . . . C
1-. “I 0. 0! “a
Turn the MONITOR ONIOFF
Press and hold the POWER 0 button on top of the monitor to turn the monitor ON.
Press and hold the POWER (Dbutton again to turn OFF the monitor.
Pairing the Camera(s) and. Monitor ICONS ARE ORANGE
The camera and monitor come paired (connected) to each other automatically. WHEN SELECTED
However, if upon opening this package the devices do not automatically connect and
transmit, you may do so manually.
1. To pair your camera and monitor, press the MENU button. Using the
navigational arrows on the front of the monitor, highlight the PAIRING icon
and press the SELECT—
2. Use the navigational arrows to highlight the the
icon.
3. Press the SELECT button. When you see ' 0 flashing next to camera 3
quickly press and hold the PAIRING E" button on the BOTTOM of the camera.
A checkmark \/ will appear next to camera confirming pairing is successful.
Video/audio will be transmitted automatically.
con.
4. To pair additional cameras, repeat steps 1 to 3 and be sure to select camera
number in the Pairing menu when pairing each additional camera.
Placement of the Monitor
This monitor can be placed on a tabletop.
"A
0 You can place the monitor on a tabletop by using the retractable table stand on the back of the
monitor. When not in uSE, simply tuck the table stand away into the back of the monitor until you
hear a "click".
Placement of the Camera
This camera can be placed on a tabletop orhung on the wall above the area being monitored.
C Place the camera within 6 feet of the area being monitored for best picture results.
. Do not place objects within 2 feet of the field of vision of the camera as
the night vision will not activate correctly if objects are too close.
Mounting the Camera on a Tabletop Safely:
1. Place the camera on a tabletop no less than 3 feet away from your
baby’s crib.
2. Feed the power cord down the back of the table or use wall clips (not
included) to secure the cord away so the baby cannot reach it.
3. Plug in the power cord, check the monitor to ensure that you are getting
a good view of your child and there are no obstructions.
Mounting the Camera on a Wall Safely:
Before drilling the holes, it is important to check the reception and camera positioning in the intended location on the wall.
Ensure you are hanging the camera no less than 3 feet away from baby's crib.
1. Pre-drill one hole in the wall using a 3/16", 4.8mm drill bit.
2. Insert a wall anchor into the hole and tap gently with a hammer until the anchor is flush with the wall.
3. Insert a screw (included) into the wall anchor and tighten until the screw only sticks out about a 1/2 inch.
4. Plug the power cord into the power input of the camera. .'
5. Locate the wall mounting hole on the bottom of the camera base. /'
6. Slide the hole over the screw sticking out of the wall.
7. Confirm that the camera IS secure, If It IS loose you may have to tighten the 3
screws more. ‘ ft
8. Use wall clips (not included) to secure the power cord away from the crib or the
baby's reach.
9. Connect the other end of the adapter into an available wall outlet.
Night Vision
The camera is equipped with NEW Invisible IR (infrared) LEDs which keep the nursery dark. The LEDs are located
on the front of the camera and allow you to see up to 12 feet in complete darkness so you can check on your baby
at any time of night. The night vision LEDs will activate automatically when the Light Sensor on the side of the
camera detects that the light levels are too low.
Adjusting the Camera Angle - P11
The camera is equipped with Pan / Tilt / Zoom (PTZ). You can adjust the angle 270°
degrees horizontal and 110° degrees vertical from the center position.
1. Press the {3” button on the front of the monitor.
2. Using the NAVIGATIONAL KEYS, move the camera to the desired position.
NAVIGATIONAL
‘ KEYS
3. When set, press the 4:} button again.
Using the ZOOM Function
In LIVEVIEW mode, press the SELECT *-' button. To return to normal view, press the SELECT *-' button
again.
Volume
Use the navigational arrows to increase /decrease /mute the VOLUME.
. Press the button to INCREASE the volume in LIVE VIEW; the VOLUME icon will
display the volume level in the top left corner of the screen.
. Press the button to DECREASE the volume; to MUTE, decrease the volume until
the 1x icon appears in the top left corner of the screen.
Using the Talk to Baby'm Two-Way Intercom
With the simple press of a button you can talk to your child at any time without entering
the nursery.
1. To talk, press and hold the Q! button on the front of the monitor and release to listen
2. To talk when using multiple cameras, select the camera in the MENU and press the k!
button, release to listen.
Setting a lullaby
Choose from three different lullabies to soothe your baby to sleep.
1. To select a lullaby, press the MENU button. Using the navigational arrows on
the front of the monitor, highlight the LULLABY icon
2. Use the to toggle to select the LULLABY icon of your choice and press the
SELECT 0" button once to select.
3. To turn OFF the lullabies, select the ’3: and press the H button once to select.
01-
Setting the lullaby volume
Control the lullaby volume with a choice of three volume settings.
1. Select a lullaby, the volume icon “f: will appear to the right of the lullaby selected.
Press the SELECT ‘-' button. The default volume setting isl‘l:
2. Use the navigationalarrows on the front of the monitor to increase ifE/
decrease ‘3. the volume.
3. To return to continuous live View, press the MENU button.
Using PEEP Mode
When in PEEP Mode, the monitor enters standby/sleep mode after 1 minute of inactivity.
When sound is detected, the screen changes to live view. There are 3 levels of sensitivity:
Low a , Medium B“ and Sensitive B‘.
. To access live view manually when the screen is off, press the POWERO button ONCE.
. PEEP Mode extends the battery life over 48 hours.
1. To set PEEP Mode, press the MENU button. Using the navigational arrows on
the front of the monitor, highlight one of the PEEP Mode icons.
2. Use the to toggle to the sensitivity icon of your choice and press the SELECT
‘4 button once to select.
3. To return to continuous live View, press the MENU button.
4. To turn off PEEP Mode, follow step 1 and select
Changing the Camera View
I. To change the camera view, press the MENU button. Using the navigational
arrows on the front of the monitor, highlight the CAMERA icon.
2. Use the to toggle to select the CAMERA icon of your choice and press the
SELECT H button once to select.
3. Select ‘ to cycle though cameras 1 through 4 and press the SELECT H button
once to select.
4. To return to continuous live view, press the MENU button.
Sound Sensitivity Settings
Sensitivity Mode allows you to adjust the sensitivity of the sound the that the camera
picks up.
1. To set the Sensitivity Mode, press the MENU button. Using the navigational
arrows on the front of the monitor, highlight the SENSITIVITY icon.
2. Use the to toggle to the your desired sensiticity and press the SELECT 0-'
button once to select.
3. The LED Ring on the front of the monitor also indicates how loud the sound in the
room is.
SOUND SENSme SEI'I'ING SOUND SENSI'I1VITYSEITING
OFF LOW MEDIUM HIIIGH |LOW MEDIUM HIGH
00.0: Oi O O O
—
Setting the Brightness
Brightness Mode sets the brightness of the the screen. Brightness Mode also extends the
battery life.
if!
i. To set the Brightness Mode, press the MENU button. Using the navigational
arrows on the front of the monitor, highlight the BRIGHTNESS icon.
»
,t.
2. Use the to toggle to the your desired brightness and press the SELECT 0-'
button once to select.
»
5!
9"
:1
Contacting Customer Support
Customer Support is just a click away whenever you need it! Our customer support team
can be reached by live web chat or on our website at www.mylevana.comlsupport. Our
experts will be happy to assist you in English, French and Spanish.
1. To access Customer Support, press the MENU button. Using the navigational
arrows on the front of the monitor, highlight the SUPPORT icon press the
SELECT -' button once to select.
2. This will take you to the screen which displays our Customer Support information.
Press the MENU button once to EXIT the Customer Support screen:
Support: www.mylevana.comlsupport
Web: www.mylevana.com
Online Live Web Chat: www.mylevana.com
ISSUE POSSIBLE SOLUTION
Equipment does not function . Confirm that the camera and monitor are ON
. The battery may be depleted; charge battery
. The power adapters may not be properly connected
No reception . Camera and monitor may not be properly paired; follow PAIRING instructions
. Camera may be too far away from the monitor
. Extend the antenna on the monitor
Reception Interference (static) The camera and monitor may be too far apart
The battery power may be too low
Other electronic devices may be interfering with the signal
The camera or monitor may be placed too close to many metal objects
....
Feedback (screeching, static) The camera and monitor may be too close together
. The volume on the monitor may be set too high
Noise (static, beeping) . Battery power may be too low
The buttons are not working . LOCK/UNLOCK Button is in LOCKED position: move to UNLOCK position
Picture works but there is no sound . Volume setting may be too low
Picture is black and white . Night vision LEDs may be ON; increase the amount of light in the room being monitored
The rechargeable battery will not charge . The power adapters may not be properly connected
. Battery pack may not be properly connected inside the battery compartment
. The monitor may not be properly docked (if charging using dock)
Maintenance
. Clean the surfaces of the camera and monitor with a soft, fluff-free cloth
- If the units become dirty, use a lightly damp cloth to wipe surfaces, taking care to not allow water into any openings
- Never use cleaning agents or solvents
Moniior Type
Screen Size
Resoluiion
TFT LCD
43“
480 x272
Talk lo Baby
Lullabies
Battery Type
Frame Fare 12 FPS Battery Capacity 3 7v l700mAh 5 zsowri
LCD Erightness Adlusiable 0,1234 Battery Connecrion Chargmg Conlaci
Frequency 2 4GHZ Battery Life (video + audio on) 5 hours
Private Signal
Technology
No. 01 hop/sec
No. of hopping channels
Channel bandwidth
Data Rate
Vos
Dlgllal FHSS
30
3 375 MHz
3 Maps
Battery Life (PEEP Mode)
Bauery Low - Visual Warning
ll
19 Bakery Low - Audible Warning
PEEP Mode [vae'r Save):
Volume Indicator LED
10 hours
V05
Transmission Power
+19 dBm
Key Lock
Vos
Max Transmission Range
750 loci
Housing Maierial
ABS Plasllr
Opiirnurn Transmission Range
Expandablc
200 {ON
Up lo 4 Cameras
Power Adapter lnpui
Power Adapicr
Lirniied charge voliage
100-240V/\C
5 9V 1A DC
Scan View yes, a
Source Exif Data:
File Type : PDF
File Type Extension : pdf
MIME Type : application/pdf
PDF Version : 1.4
Linearized : No
XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Create Date : 2013:02:07 14:09:09+08:00
Modify Date : 2013:02:07 14:10:03+08:00
Metadata Date : 2013:02:07 14:10:03+08:00
Producer : PDF-XChange 3.60.0106 (Windows)
Format : application/pdf
Document ID : uuid:d97f8373-e5d4-421f-9141-9b4d3832b89e
Instance ID : uuid:c79f8ab2-bd3c-4d05-a72d-2d83fc75b755
Page Count : 23
EXIF Metadata provided by EXIF.tools