Circus World Displays 32002 2.4 GHz Digital Video Baby Monitor (Camera Unit) User Manual
Circus World Displays Ltd. 2.4 GHz Digital Video Baby Monitor (Camera Unit)
Users Manual
™ Lila Digital Baby Video Monitor Moniteur vidéo bébé numérique Video Monitor Digital para Bebé Manual / Manuel / Manual CAUTION: Keep small parts away from children. ATTENTION: Gardez les petites pièces hors de la portée des enfants. PRECAUCIÓN: Mantenga las piezas pequeñas fuera del alcance de los niños. mylevana.com 30000_31000_32000_LILA E_F_S.indd 1 07/01/2013 4:37:33 PM SAFETY INSTRUCTIONS CAUTION: Keep small parts away from children. Strangulation Hazard: Children can become entangled in cords. Power cords should be kept more than 3 feet away from the crib and baby’s reach at all times. Baby monitors and cameras with power cords should never be hung on or near the crib. This product is not a toy and should be kept out of children’s reach. This product contains small parts. Exercise care when unpacking and assembling the product. Read and Keep Instructions: All the safety and operating instructions should be read before the video baby monitor is operated. This product cannot replace responsible adult supervision. Water and Moisture: This product is designed for indoor use only. The unit should not be exposed to rain, moisture, dripping or splashing. No objects filled with liquid should be placed on top of, or beside the product, such as a glass or vase. This item should not be used near water. Non-Use Periods: Always unplug the AC adapters from the wall outlets during long periods of non-use. Ventilation: This baby monitor should not be used on a bed, sofa, rug or similar surface that may block the ventilation openings, or be placed in an enclosed area, such as a bookcase or drawer that may impede air flow. Keep Away from Sources of Heat: This unit should not be exposed to direct heat sources such as a candle, fireplace, radiator, heat register, stove or other appliance that emits heat. The unit should not be left in direct sunlight. Power Source: This unit should only be used with the AC power adapters included in this package (rated 6V 800mA) Damage Requiring Service: This unit should be serviced by qualified personnel only when: a. b. c. d. Objects have fallen or liquid has been spilled into the product The units have been exposed to rain The units do not appear to operate normally or exhibits a distinct change in performance The units have been dropped or the enclosure damaged mylevana.com 30000_31000_32000_LILA E_F_S.indd 2 07/01/2013 4:37:33 PM FCC STATEMENT FCC WARNING This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment IMPORTANT NOTE: FCC Radiation Exposure Statement: This equipment complies with FCC /IC radiation exposure limits set forth for an uncontrolled environment .This equipment should be installed and operated with minimum distance 20cm between the radiator& your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. IC STATEMENT: This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peut fonctionner avec une antenne d'un type et d'un gain maximal (ou inférieur) approuvé pour l'émetteur par Industrie Canada. The manufacturer is not responsible for any radio or TV interference caused by Dans le but de réduire les risques de brouillage radioélectrique à l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas l'intensité nécessaire à l'établissement d'une communication satisfaisante. unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment. 30000_31000_32000_LILA E_F_S.indd 3 mylevana.com 07/01/2013 4:37:33 PM Please visit our website at www.mylevana.com for information about your product’s warranty. We take quality very seriously. That is why all of our products come with a one-year warranty from the original purchase date against defects in workmanship and materials. If you have warranty or support issues, please contact us using any of the following methods: Web: www.mylevana.com Support: www.mylevana.com/support LEVANA Canada 4080 Montrose Road Niagara Falls, ON Canada L2H 1J9 LEVANA USA 60 Industrial Parkway #Z64 Cheektowaga NY USA 14227 Warranty Terms 1. LEVANA® products are guaranteed for a period of one year from the date of purchase against defects in workmanship and materials. This warranty is limited to the repair, replacement or refund of the purchase price at LEVANA’s option. 2. This warranty becomes void if the product shows evidence of having been misused, mishandled or tampered with contrary to the applicable instruction manual. 3. Routine cleaning, normal cosmetic and mechanical wear and tear are not covered under the terms of this warranty. 4. The warranty expressly provided for herein is the sole warranty provided in connection with the product itself and no other warranty, expressed or implied is provided. LEVANA assumes no responsibilities for any other claims not specifically mentioned in this warranty. 5. This warranty does not cover the shipping cost, insurance or any other incidental charges. 6. You MUST contact LEVANA at www.mylevana.com/support before sending any product back for repair. You will be sent a Return Authorization form with return instructions. When returning the product for warranty service, please pack it carefully in the original box with all supplied accessories, and enclose your original receipt or copy, and a brief explanation of the problem (include RA #). 7. This warranty is valid only in Canada and the continental U.S. a.com8. This warranty cannot be re-issued. mylevana.com 30000_31000_32000_LILA E_F_S.indd 4 07/01/2013 4:37:33 PM TABLE OF CONTENTS SAFETY INSTRUCTIONS ...............................................................................................................2 FCC STATEMENT............................................................................................................................3 WARRANTY .....................................................................................................................................4 WHAT’S INCLUDED .......................................................................................................................6 BUTTONS AND CONNECTIONS - MONITOR .......................................................................... 7 BUTTONS AND CONNECTIONS - CAMERA .............................................................................8 SETUP...............................................................................................................................................9 Battery installation .........................................................................................................9 Get the Most Out of Your Rechargeable Battery .....................................................9 Connecting Power to the Monitor / Charging Battery.........................................10 Connecting Power to the Camera ...........................................................................10 Screen Icons ................................................................................................................. 11 OPERATION ..................................................................................................................................12 Turn on the Monitor ....................................................................................................12 Pairing the Cameras & Monitor .................................................................................12 Placement of the Monitor ..........................................................................................13 Placement of the Camera ..........................................................................................13 Mounting the Camera on a Tabletop Safely ...........................................................13 Mounting the Camera on a Wall Safely ...................................................................14 Night Vision...................................................................................................................15 Adjusting the Camera Angle ......................................................................................15 MONITOR ......................................................................................................................................16 Volume ...........................................................................................................................16 Using the Talk to Baby™ Two-Way Intercom .........................................................16 Using Power Save ........................................................................................................ 17 Selecting a different camera view ............................................................................ 17 Setting the Brightness .................................................................................................18 Contacting Customer Support ..................................................................................18 TROUBLESHOOTING ..................................................................................................................19 MAINTENANCE ............................................................................................................................19 30000_31000_32000_LILA E_F_S.indd 5 mylevana.com 07/01/2013 4:37:33 PM WHAT’S INCLUDED Ŕ Ŕ Ŕ Ŕ /JHIU7JTJPO$BNFSB #BCZ7JEFP.POJUPS 3FDIBSHFBCMF#BUUFSZ 1PXFS"EBQUFST Ŕ Ŕ Ŕ *OTUSVDUJPO.BOVBM :FBS8BSSBOUZ -JGFUJNF-JWF$VTUPNFS4VQQPSU This product is not a toy. This product contains small parts. Exercise care when unpacking and assembling the product. This product does not replace responsible adult supervision. Check on your child at regular intervals and make sure your monitor is always adequately charged. LEVANA® does not endorse any LEVANA® products for illegal activities. Levana is not responsible or liable in any way for any damage, vandalism, theft or any other action that may occur while a LEVANA® product is in use by the purchaser. We reserve the right to change models, configuration, or specifications without notice or liability. Product may not be exactly as shown. ©2012 LEVANA®. All rights reserved. LEVANA®, the LEVANA® logo, Lila™ and other LEVANA® marks may be registered. All other Trademarks are the property of their respective owners. mylevana.com 30000_31000_32000_LILA E_F_S.indd 6 07/01/2013 4:37:35 PM MONITOR 1. LED SOUND BAR LED lights show different levels of sound 2. LCD SCREEN 3. POWER / VIDEO ON-OFF BUTTON 4. VOLUME DOWN / MOVE LEFT BUTTON 5. TALK TO BABY™ BUTTON Press and hold to talk, release to listen 6. MENU / SELECT BUTTON MICROPHONE 8. VOLUME UP / MOVE RIGHT BUTTON 9. ANTENNA Extend to improve signal 10. SPEAKER 11. REMOVEABLE STAND CLIP 12. TABLE STAND 13. BATTERY COMPARTMENT 10 11 12 13 30000_31000_32000_LILA E_F_S.indd 7 7. mylevana.com 07/01/2013 4:37:37 PM CAMERA 1. MICROPHONE 6. LIGHT SENSOR 2. POWER ON/OFF BUTTON 7. POWER LED 3. PAIRING BUTTON 8. SPEAKER 4. INVISIBLE NIGHT VISION LEDs 9. POWER INPUT 5. CAMERA mylevana.com 30000_31000_32000_LILA E_F_S.indd 8 07/01/2013 4:37:39 PM SETUP LET’S GET STARTED! Battery Installation Battery connectorss 1. Gently remove the STAND CLIP on the back of the monitor to allow access to the BATTERY COMPARTMENT COVER. 2. Slide the BATTERY COMPARTMENT COVER down to remove. 3. Insert the battery with the words "Rechargeable Battery" facing towards you. The battery connectors should line up with the connectors inside the battery compartment. 4. Slide the BATTERY COMPARTMENT COVER back into place and reinstall the STAND CLIP. Get the Most Out of Your Rechargeable Battery Ŕ Ŕ Ŕ Ŕ Ŕ Fully charge battery (4 hours) before first use. To maximize battery life, charge battery before battery is fully drained. Avoid extreme heat or cold as this will affect the life of the battery. button on the front of the monitor ONCE. Turn LCD screen OFF; press POWER Lila™ menu settings that increase battery life: Power Save Mode: After 1 minute of inactivity, monitor enters standby/sleep mode. Adjustable Brightness: Decreasing screen brightness will extend battery life. 6. For extended periods of non-use, please remove battery from baby monitor. 30000_31000_32000_LILA E_F_S.indd 9 mylevana.com 07/01/2013 4:37:40 PM SETUP Connecting Power to the Monitor / Charging Battery 1. Connect the small end of power adapter marked MONITOR into the DC input on the side of the monitor as shown in the diagram. 2. Connect the other end of the adapter into an available wall outlet. For safety reasons, ONLY use the adapters included in the package. 3. Press the POWER / VIDEO ON-OFF BUTTON 4. The icon in the top right corner of the main screen will show you the battery power status. EMPTY DC Input put CHARGING FULL Connecting Power to the Camera 1. 2. Connect the small end of the power into the DC adapter marked CAMERA input on the back of the camera base as shown in the diagram. For safety reasons,, ONLY use the adapters included in the package. On the side of the camera, slide the POWER switch UP to the ON position. The POWER LED will light up. ON / OFF Switch Power LED DC Input Note: Baby monitors and cameras with power cords should never be hung on or near the crib as it is a strangulation hazard. Power cords should be kept no less than 3 feet away from the crib and the baby’s reach at all times. mylevana.com 30000_31000_32000_LILA E_F_S.indd 10 10 07/01/2013 4:37:43 PM SCREEN ICONS BRIGHTNESS SIGNAL STRENGTH NO SIGNAL DARK STRONG SIGNAL BATTERY STRENGTH POWER SAVE EMPTY CHARGING FULL CAMERA NO CAM CAM CAM CAM OFF SEQ MODE PAIRING ut ON TALK TO BABY™ CAM PAIRING BRIGHT SUPPORT CAM CAM CAM CAM VOLUME OFF EXIT LOUD 11 30000_31000_32000_LILA E_F_S.indd 11 mylevana.com 07/01/2013 4:37:44 PM OPERATION Turn on the MONITOR Press and hold the POWER button on the front of the monitor. Pairing the Camera(s) and Monitor The camera and monitor come paired (connected) to each other automatically. However, if upon opening this package the devices do not automatically connect and transmit, you may do so manually. Note: Before you begin pairing, be sure to have the monitor and the camera(s) side by side. 1. button. Using the To pair your camera and monitor, press the MENU navigational arrows – + on the front of the monitor, highlight the PAIRING icon and press the MENU button once to select. 2. Use the navigational arrows – + to select the 3. Press MENU . When you see flashing next to camera icon, quickly press button on the side of the camera. A checkmark will and hold the PAIRING appear next to camera confirming pairing is successful. Video/audio will be transmitted automatically. 4. To pair additional cameras, repeat steps 1 to 3 and be sure to select camera number or in the Pairing menu when pairing each additional camera. icon. ICONS ARE ORANGE WHEN SELECTED mylevana.com 30000_31000_32000_LILA E_F_S.indd 12 12 07/01/2013 4:37:45 PM OPERATION Placement of the Monitor This monitor can be placed on a tabletop. Ŕ r, ou You can place the monitor on a tabletop by using the retractable table stand on the back of the monitor. When not in use, simply tuck the table stand away into the back of the monitor until you hear a "click". Placement of the Camera This camera can be placed on a tabletop or hung on the wall above the area being monitored. Ŕ Ŕ Place the camera within 15 feet of the area being monitored for best picture results. Do not place objects within 2 feet of the field of vision of the camera as the night vision will not activate correctly if objects are too close. Mounting the Camera on a Tabletop Safely: 1. 2. 3. Place the camera on a tabletop no less than 3 feet away from your baby’s crib. Feed the power cord down the back of the table or use wall clips (not included) to secure the cord away so the baby cannot reach it. Plug in the power cord, check the monitor to ensure that you are getting a good view of your child and there are no obstructions. er 3 ft Note: Baby monitors and cameras with power cords should never be hung on or near the crib as it is a strangulation hazard. Power cords should be kept no less than 3 feet away from the crib and the baby’s reach at all times. 13 30000_31000_32000_LILA E_F_S.indd 13 mylevana.com 07/01/2013 4:37:47 PM OPERATION Mounting the Camera on a Wall Safely: Before drilling the holes, it is important to check the reception and camera positioning in the intended location on the wall. Ensure you are hanging the camera no less than 3 feet away from baby’s crib. Note: Baby monitors and cameras with power cords should never be hung on or near the crib as it is a strangulation hazard. Power cords should be kept no less than 3 feet away from the crib and the baby’s reach at all times. 1. Pre-drill two holes in the wall using a 3/16”, 4.8mm drill bit. 2. Insert wall anchors (not included) into each hole and tap gently with a hammer until the anchor is flush with the wall. 3. Insert a screw (not included) into each wall anchor and tighten until the screws only stick out about a 1/2 inch. 4. Plug the power cord into the power input of the camera. 5. Locate the wall mounting holes on the bottom of the camera base. 6. Slide the holes over the screws sticking out of the wall. 7. Confirm that the camera is secure, if it is loose you may have to tighten the screws more. 8. Use wall clips (not included) to secure the power cord away from the crib or the baby’s reach. 9. Connect the other end of the adapter into an available wall outlet. mylevana.com 30000_31000_32000_LILA E_F_S.indd 14 14 07/01/2013 4:37:47 PM OPERATION Night Vision The camera is equipped with NEW Invisible IR (infrared) LEDs which keep the nursery dark. The LEDs are located on the front of the camera and allow you to see up to 12 feet in complete darkness so you can check on your baby at any time of night. The night vision LEDs will activate automatically when the Light Sensor on the camera detects that the light levels are too low. INVISIBLE LEDs TRADITIONAL LEDs Adjusting the Camera Angle The camera has a track built into the base. The track allows the camera to pivot UP and DOWN and turn side to side. Always return the camera to the CENTER POSITION before changing the camera angle. DC INPUT TRACK FRONT OF CAMERA CENTER POSITION Note: Camera does not rotate freely 360°. Rotating it past the point where resistance is felt will result in permanent damage to the device. 15 30000_31000_32000_LILA E_F_S.indd 15 mylevana.com 07/01/2013 4:37:49 PM MONITOR Volume Use the navigational arrows – + to increase /decrease /mute the VOLUME. Ŕ Ŕ Press the + button to INCREASE the volume in LIVE VIEW; the VOLUME icon will display the volume level in the top left corner of the screen. Press the – button to DECREASE the volume; to MUTE, decrease the volume until the icon appears in the top left corner of the screen. Using the Talk to Baby™ Two-Way Intercom With the simple press of a button you can talk to your child at any time without entering the nursery. 1. To talk, press and hold the button on the front of the monitor and release to listen. 2. To talk when using multiple cameras, select the camera in the MENU and press the release to listen. mylevana.com 30000_31000_32000_LILA E_F_S.indd 16 button, 16 07/01/2013 4:37:49 PM MONITOR Using Power Save When in Power Save Mode, the monitor enters standby/sleep mode after 1 minute of inactivity. When sound is detected, the screen changes to live view. Ŕ To access live view manually when the screen is off, press the POWER button ONCE. Ŕ Power Save Mode extends the battery life over 48 hours. 1. To set Power Save Mode, press the MENU button. Using the navigational arrows – + on the front of the monitor, highlight the POWER SAVE icon and press the MENU button once to select. 2. Use the navigational arrows – + to select the icon and press the MENU POWER SAVE ON button once to select. 3. To return to continuous live view, use the navigational arrows – + to select the POWER SAVE OFF icon. Selecting a Different Camera View 1. To change the camera view, press the MENU button. Using the navigational arrows – + on the front of the monitor, highlight the CAMERA icon and press the MENU button once to select. 2. Use the navigational arrows – + to select the CAMERA icon of your choice and press the MENU button once to select. 3. Select to cycle though cameras 1 through 4 and press the MENU button once. 17 30000_31000_32000_LILA E_F_S.indd 17 mylevana.com 07/01/2013 4:37:51 PM MONITOR Setting the Brightness Brightness Mode sets the brightness of the screen. Reducing the brightness also extends the battery life. 1. To set the Brightness Mode, press the MENU button. Using the navigational arrows – + on the front of the monitor, highlight the BRIGHTNESS icon and press the MENU button once to select. 2. Use the navigational arrows – + to select the button desired brightness and press the MENU once to select. Contacting Customer Support Customer Support is just a click away whenever you need it! Our customer support team can be reached by email, live web chat or on our website at www.mylevana. com/support. Our experts will be happy to assist you in English, French and Spanish. 1. To access Customer Support, press the MENU button. Using the navigational arrows – + on the front of the monitor, highlight the SUPPORT icon and press the MENU button once to select. 2. This will take you to the screen which displays Customer Support contact information. Press the MENU button once to EXIT the Customer Support screen. Support: www.mylevana.com/support Web: www.mylevana.com Online Live Web Chat: www.mylevana.com mylevana.com 30000_31000_32000_LILA E_F_S.indd 18 18 07/01/2013 4:37:53 PM TROUBLESHOOTING ISSUE POSSIBLE SOLUTION Equipment does not function Ŕ Ŕ Ŕ Confirm that the camera and monitor are ON The battery may be depleted; charge battery The power adapters may not be properly connected No reception Ŕ Camera and monitor may not be properly paired; follow PAIRING instructions Camera may be too far away from the monitor Extend the antenna on the monitor Ŕ Ŕ Reception Interference (static) Ŕ Ŕ Ŕ Ŕ Feedback (screeching, static) Ŕ The camera and monitor may be too far apart The battery power may be too low Other electronic devices may be interfering with the signal The camera or monitor may be placed too close to many metal objects Ŕ The camera and monitor may be too close together The volume on the monitor may be set too high Noise (static, beeping) Ŕ Battery power may be too low Picture works but there is no sound Ŕ Volume setting may be too low Picture is black and white Ŕ Night vision LEDs may be ON; increase the amount of light in the room being monitored The rechargeable battery will not charge Ŕ Ŕ The power adapters may not be connected Battery pack may not be properly connected inside the battery compartment Maintenance Ŕ Clean the surfaces of the camera and monitor with a soft, lint-free cloth Ŕ If the units become dirty, use a lightly damp cloth to wipe surfaces, taking care to not allow water into any openings Ŕ Never use cleaning agents or solvents 19 30000_31000_32000_LILA E_F_S.indd 19 mylevana.com 07/01/2013 4:37:53 PM mylevana.com 30000_31000_32000_LILA E_F_S.indd 56 07/01/2013 4:38:36 PM
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Encryption : Standard V4.4 (128-bit) User Access : Print, Extract, Print high-res Author : a Create Date : 2013:05:13 20:23:37+08:00 Modify Date : 2013:05:14 10:46:56-07:00 XMP Toolkit : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26 Metadata Date : 2013:05:14 10:46:56-07:00 Creator Tool : Adobe InDesign CS5 (7.0.4) Format : application/pdf Title : User Manual.pdf Creator : a Document ID : uuid:63613b86-08dc-4daf-b1ba-70a8759cf39e Instance ID : uuid:3bcbce38-2255-488d-b498-3223db3ee0a4 Producer : Acrobat Distiller 9.0.0 (Windows) Page Count : 20EXIF Metadata provided by EXIF.tools