Circus World Displays 32008B 2.4GHz Digital Video Baby Monitor User Manual updated VM8437 31006B manual

Circus World Displays Ltd. 2.4GHz Digital Video Baby Monitor updated VM8437 31006B manual

Users Manual

Astra™mylevana.comDigital Baby Video MonitorMoniteur vidéo bébé numériqueVideo Monitor Digital para Bebé MANUAL / MANUEL / MANUALCAUTION: Keep small parts away from children.ATTENTION: Gardez les petites pièces hors de la portée des enfants.PRECAUCIÓN: Mantenga las piezas pequeñas fuera del alcance de los niños.Digital Baby Video MonMoniteur vidéo bébé numériVideo Monitor Digital para B31006B
2SAFETY WARNINGSmylevana.com CAUTION: Keep small parts away from children. Strangulation Hazard: Children can become entangled in cords. Power cords should be kept more than 3 feet away from the crib and baby’s reach at all times. Baby monitors and cameras with power cords should never be hung on or near the crib. This product is not a toy and should be kept out of children’s reach. This product contains small parts. Exercise care when unpacking and assembling the product. Read and Keep Instructions: All the safety and operating instructions should be read before the video baby monitor is operated. This product cannot replace responsible adult supervision. Use only with provided power supply. The socket-outlet shall be installed near the equipment and shall be easily accessible. RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE! Dispose of used batteries according to the instructions. Use only batteries/power supplies listed in the user manual.Water and Moisture: This product is designed for indoor use only. The unit should not be exposed to rain, moisture, dripping or splashing. No objects filled with liquid should be placed on top of, or beside the product, such as a glass or vase. This item should not be used near water.Non-Use Periods: Always unplug the AC adapters from the wall outlets during long periods of non-use.Ventilation: This baby monitor should not be used on a bed, sofa, rug or similar surface that may block the ventilation openings, or be placed in an enclosed area, such as a bookcase or drawer that may impede air flow.Keep Away from Sources of Heat: This unit should not be exposed to direct heat sources such as a candle, fireplace, radiator, heat register, stove or other appliance that emits heat. The unit should not be left in direct sunlight.Power Source: This unit should only be used with the AC power adapters included in this package (rated 5.9V 1A)Damage Requiring Service: This unit should be serviced by qualified personnel only when:a. Objects have fallen or liquid has been spilled into the productb. The units have been exposed to rainc. The units do not appear to operate normally or exhibits a distinct change in performanced. The units have been dropped or the enclosure damaged
FFCC Caution: Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operationn is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. IMPORTANT NOTE: FCC Radiation Exposure Statement: This equipment complies with FCC\IC radiation exposure limits set forth for an uncontrolled environment .This equipment should be installed and operated with minimum distance 20cm between the radiator& your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. IC Warning RSS(Category I Equipment): This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Under idustry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. Conformément à la réglementation d'Industrie Canada, le présent émetteur avec une antenne d'un type et d'un gain maximalDans le but de réduire les risques de brouillage radioélectrique à l'intention il faut choisir le type d'antenne et son gain de sortene dépasse pasradio peut fonctionner (ou inférieur) approuvé pour l'émetteur par Industrie Canada. des autres utilisateurs, que la puissance isotrope rayonnée équivalente (p.i.r.e.) l'intensité nécessaire à l'établissement d'une communication satisfaisante.Le présent appareil est conforme aux CNR d'Industrie Canada applicablesL'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique aux appareils radio exempts de licence. subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.3
We take quality very seriously. This is why all of our products come with a one-year warranty from the original purchase date against defects in workmanship and materials. If you have warranty or support issues please contact us using any of the following methods:Web: www.mylevana.com Support: www.mylevana.com/support LEVANA Canada LEVANA USA 4080 Montrose Road 60 Industrial Parkway #Z64 Niagara Falls, ON Cheektowaga NY Canada L2H 1J9 USA 14227Warranty Terms1. LEVANA® products are guaranteed for a period of one year from the date of purchase against defects in workmanship and materials. This warranty is limited to the repair, replacement or refund of the purchase price at LEVANA’s option. 2. This warranty becomes void if the product shows evidence of having been misused, mishandled or tampered with contrary to the applicable instruction manual. 3. Routine cleaning, normal cosmetic and mechanical wear and tear are not covered under the terms of this warranty. 4. The warranty expressly provided for herein is the sole warranty provided in connection with the product itself and no other warranty, expressed or implied is provided. LEVANA assumes no responsibilities for any other claims not specifically mentioned in this warranty. 5. This warranty does not cover the shipping cost, insurance or any other incidental charges. 6. You MUST contact LEVANA at www.mylevana.com/support before sending any product back for repair. You will be sent a Return Authorization form with return instructions. When returning the product for warranty service, please pack it carefully in the original box with all supplied accessories, and enclose your original receipt or copy, and a brief explanation of the problem (include RA #). 7. This warranty is valid only in Canada and the continental U.S.8. This warranty cannot be re-issued.Please visit our website at www.myLEVANA.com for information about your product’s warranty4mylevana.com
TABLE OF CONTENTSSAFETY INSTRUCTIONS ............................................................................................................................................................................................................. 2FCC STATEMENT .......................................................................................................................................................................................................................... 3WARRANTY ................................................................................................................................................................................................................................... 4WHAT’S INCLUDED ..................................................................................................................................................................................................................... 6BUTTONS AND CONNECTIONS - MONITOR ........................................................................................................................................................................ 7BUTTONS AND CONNECTIONS - CAMERA ........................................................................................................................................................................... 8SETUP ............................................................................................................................................................................................................................................. 9Battery installation ....................................................................................................................................................................................................... 9Connecting Power to the Monitor / Charging Battery ....................................................................................................................................... 10Connecting Power to the Camera .........................................................................................................................................................................10Screen Icons ................................................................................................................................................................................................................11OPERATION ................................................................................................................................................................................................................................ 12Turn the Monitor ON / OFF ...................................................................................................................................................................................... 12Pairing the Cameras & Monitor ............................................................................................................................................................................... 12Placement of the Monitor ........................................................................................................................................................................................ 13Placement of the Camera ........................................................................................................................................................................................ 13Mounting the Camera on a Tabletop Safely ......................................................................................................................................................... 13Mounting the Camera on a Wall Safely ................................................................................................................................................................. 14Night Vision ................................................................................................................................................................................................................. 15Adjusting the Camera Angle .................................................................................................................................................................................... 15Using the ZOOM Function ....................................................................................................................................................................................... 15Volume ......................................................................................................................................................................................................................... 16Using the Talk to Baby™ Two-Way Intercom ....................................................................................................................................................... 16Selecting a Lullaby ..................................................................................................................................................................................................... 16Using PEEP Mode ........................................................................................................................................................................................................17Changing the Camera View ......................................................................................................................................................................................17Setting the Brightness ............................................................................................................................................................................................... 18Sound Sensitivity Settings ........................................................................................................................................................................................ 18Contacting Customer Support ................................................................................................................................................................................ 19TROUBLESHOOTING ................................................................................................................................................................................................................20mylevana.com5
Ŕ 1BO5JMU;PPN/JHIU7JTJPO$BNFSBŔ #BCZ7JEFP.POJUPSŔ 3FDIBSHFBCMF#BUUFSZŔ 1PXFS"EBQUFSTŔ .PVOUJOH)BSEXBSFŔ *OTUSVDUJPO.BOVBMŔ :FBS8BSSBOUZŔ -JGFUJNF-JWF$VTUPNFS4VQQPSUThis product is not a toy.This product contains small parts. Exercise care when unpacking and assembling the product.This product does not replace responsible adult supervision. Check on your child at regular intervals and make sure your monitor is always adequately charged.LEVANA® does not endorse any LEVANA® products for illegal activities. Levana is not responsible or liable in any way for any damage, vandalism, theft or any other action that may occur while a LEVANA® product is in use by the purchaser.We reserve the right to change models, configuration, or specifications without notice or liability. Product may not be exactly as shown.©2012 LEVANA®. All rights reserved. LEVANA®, the LEVANA® logo, Astra™ and other LEVANA® marks may be registered. All other Trademarks are the property of their respective owners.WHAT’S INCLUDED6mylevana.com
 LOCK / UNLOCK BUTTON Disables ALL function buttons in the LOCK position2. LCD SCREEN3. POWER ON/OFF4. POWER INPUT5. TALK TO BABY™ Press and hold to talk, release to listen6. 1"/5*-5;00.#6550/7. MENU8. MICROPHONE9. COLOR-CHANGING LED RING Ring changes color with sound intensity  4&-&$5*0/ ;00.#6550/ DIRECTIONAL ARROWS / VOLUME CONTROL ANTENNA Extend to improve signal  TABLE STAND SPEAKER BATTERY COMPARTMENTMONITOR56792834mylevana.com7
 15;$".&3"2. MICROPHONE3. POWER LED4. NIGHT VISION LIGHT SENSOR5. ANTENNA6. POWER INPUT7. POWER ON/OFF8. SPEAKER CAMERA23546788mylevana.com
LET’S GET STARTED!Battery Installation1. Gently remove the BATTERY COMPARTMENT COVER on the back of the monitor by sliding down. 2. Insert the battery; the battery connectors on the battery should line up with the connectors inside the battery compartment.3. Slide the BATTERY COMPARTMENT COVER back into place. PEEP Mode: After 1 minute of inactivity, monitor enters standby/sleep mode. Adjustable Brightness: Decreasing screen brightness will extend battery life.6. For extended periods of non-use, please remove battery from baby monitor.SETUPGet the Most Out of Your Rechargeable Battery1. Fully charge battery (4 hours) before first use.2. To maximize battery life, charge battery before battery is fully drained.3. Avoid extreme heat or cold as this will aect the life of the battery.4. Turn LCD screen OFF; press POWER button on the side of the monitor ONCE.5. Astra™ menu settings that increase battery life:mylevana.com923
Note: Baby monitors and cameras with power cords should never be hung on or near the crib as it is a strangulation hazard. Power cords should be kept no less than 3 feet away from the crib and the baby’s reach at all times.Connecting Power to the Monitor / Charging Battery1. Connect the small end of power adapter marked MONITOR into the DC input on the side of the monitor as shown in the diagram. Connect the other end of the adapter into an available wall outlet. For safety reasons, ONLY use the adapters included in the package.2. Press and hold the POWER button on the side of the monitor to turn the monitor ON.3. The icon in the top right corner of the main screen will show you the battery power status.4. The LED Ring on the front of the monitor also indicates the battery power status. SOLID BLUE = BATTERY FULLY CHARGED SLOW FLASHING BLUE = BATTERY CHARGINGQUICK FLASHING BLUE = BATTERY LOW FLASHING PINK = PAIRING UNSUCCESSFUL5. For safety reasons, ONLY use the adapters included in the package.EMPTY CHARGING FULLConnecting Power to the Camera1. Take the second power adapter and connect the small end of the power adapter marked CAMERA into the DC input on the side of the camera base as shown in the diagram. For safety reasons, ONLY use the adapters included in the package. 2. On the side of the camera, slide the POWER switch LEFT to the ON position. The POWER LED will light up.SETUPON / OFFSwitchDC InputODCDC InputLED Ringmylevana.com
SIGNAL STRENGTH NO STRONGSIGNAL SIGNALBATTERY STRENGTHEMPTY CHARGING FULLVOLUME OFF LOUDPEEP MODE BRIGHTNESSDARK BRIGHTCAMERANO CAM CAM CAM CAM SEQCAM 1 2 3 4 MODECAMERANO CAM CAM CAM CAM SEQCAM 1 2 3 4 MODEPAIRINGPAIRING CAM CAM CAM CAM 1 2 3 4 SCREEN ICONSSOUND SENSITIVITY SETTING OFF LOW MEDIUM HIGH——————mylevana.comTALK TO BABY™ SUPPORTPTZ / VPIZ / PTZ ZOOM
Turn the MONITOR ON/OFFPress and hold the POWER button on the side of the monitor to turn the monitor ON. Press and hold the POWER button again to turn OFF the monitor.Pairing the Camera(s) and MonitorThe camera and monitor come paired (connected) to each other automatically. However, if upon opening this package the devices do not automatically connect and transmit, you may do so manually.1. To pair your camera and monitor, press the MENU button. Using the navigational arrows on the front of the monitor, highlight the PAIRING icon and press the SELECT + button once to select.2. Use the navigational arrows to highlight the the icon.3. Press the SELECT + button. When you see flashing next to camera icon, quickly press and hold the PAIRING button on the BOTTOM of the camera. A checkmark will appear next to camera confirming pairing is successful. Video/audio will be transmitted automatically. 4. To pair additional cameras, repeat steps 1 to 3 and be sure to select camera number , or in the Pairing menu when pairing each additional camera. Note: Before you begin pairing, be sure to have the monitor and the camera(s) side by side. ICONS ARE ORANGE WHEN SELECTEDOPERATIONmylevana.com
Placement of the MonitorThis monitor can be placed on a tabletop.Ŕ You can place the monitor on a tabletop by using the retractable table stand on the back of the monitor. When not in use, simply tuck the table stand away into the back of the monitor until you hear a "click".Placement of the CameraThis camera can be placed on a tabletop or hung on the wall above the area being monitored. Ŕ Place the camera within 15 feet of the area being monitored for best picture results. Ŕ Do not place objects within 2 feet of the field of vision of the camera as the night vision will not activate correctly if objects are too close.Mounting the Camera on a Tabletop Safely:1. Place the camera on a tabletop no less than 3 feet away from your baby’s crib.2. Feed the power cord down the back of the table or use wall clips (not included) to secure the cord away so the baby cannot reach it.3. Plug in the power cord, check the monitor to ensure that you are getting a good view of your child and there are no obstructions.Note: Baby monitors and cameras with power cords should never be hung on or near the crib as it is a strangulation hazard. Power cords should be kept no less than 3 feet away from the crib and the baby’s reach at all times.OPERATIONmylevana.com3 ft
Mounting the Camera on a Wall Safely:Before drilling the holes, it is important to check the reception and camera positioning in the intended location on the wall. Ensure you are hanging the camera no less than 3 feet away from baby’s crib.1. Pre-drill two holes in the wall using a 3/16”, 4.8mm drill bit.2. Insert the included wall anchors into each hole and tap gently with a hammer until the anchor is flush with the wall.3. Insert a screw (included) into each wall anchor and tighten until the screws only stick out about a 1/2 inch.4. Plug the power cord into the power input of the camera.5. Locate the wall mounting holes on the bottom of the camera base.6. Slide the holes over the screws sticking out of the wall.7. Confirm that the camera is secure, if it is loose you may have to tighten the screws more.8. Use wall clips (not included) to secure the power cord away from the crib or the baby’s reach. 9. Connect the other end of the adapter into an available wall outlet.Note: Baby monitors and cameras with power cords should never be hung on or near the crib as it is a strangulation hazard. Power cords should be kept no less than 3 feet away from the crib and the baby’s reach at all times.OPERATIONmylevana.com
Night VisionThe camera is equipped with NEW Invisible IR (infrared) LEDs which keep the nursery dark. The LEDs are located on the front of the camera and allow you to see up to 12 feet in complete darkness so you can check on your baby at any time of night. The night vision LEDs will activate automatically when the Light Sensor on the side of the camera detects that the light levels are too low."EKVTUJOHUIF$BNFSB"OHMF15;The camera is equipped with Pan / Tilt / Zoom (PTZ). You can adjust the angle 300° degrees horizontal and 110° degrees vertical from the center position. 1. Press the button on the front of the monitor. 2. Using the NAVIGATIONAL KEYS, move the camera to the desired position. 3. When set, press the button again.6TJOHUIF;00.'VODUJPOIn LIVE VIEW mode, press the SELECT + button. To return to normal view, press the SELECT + button again.INVISIBLE LEDsOPERATIONCENTER POSITIONNAVIGATIONALKEYSmylevana.com
VolumeUse the navigational arrows to increase /decrease /mute the VOLUME. Ŕ Press the button to INCREASE the volume in LIVE VIEW; the VOLUME icon will display the volume level in the top left corner of the screen.Ŕ Press the button to DECREASE the volume; to MUTE, decrease the volume until the icon appears in the top left corner of the screen.Using the Talk to Baby™ Two-Way Intercom With the simple press of a button you can talk to your child at any time without entering the nursery. 1. To talk, press and hold the button on the front of the monitor and release to listen.2. To talk when using multiple cameras, select the camera in the MENU and press the button, release to listen.Setting a lullabyChoose from three dierent lullabies to soothe your baby to sleep. 1. To select a lullaby, press the MENU button. Using the navigational arrows on the front of the monitor, highlight the LULLABY icon.2. Use the to toggle to select the LULLABY icon of your choice and press the SELECT + button once to select. 3. To turn OFF the lullabies, select the and press the + button once to select. OPERATIONNote: Placing the monitor and camera too close together will create feedback. DECREASE or MUTE the volume and move the camera away from the monitor.mylevana.com
Using PEEP ModeWhen in PEEP Mode, the monitor enters standby/sleep mode after 1 minute of inactivity. When sound is detected, the screen changes to live view. Ŕ To access live view manually when the screen is o, press the POWER button ONCE.Ŕ PEEP Mode extends the battery life over 48 hours. 1. To set PEEP Mode, press the MENU button. Using the navigational arrows on the front of the monitor, highlight the PEEP Mode icon . 2. Use the to toggle to the icon and press the SELECT + button once to select.3. To return to continuous live view, press the MENU button.Changing the Camera View1. To change the camera view, press the MENU button. Using the navigational arrows on the front of the monitor, highlight the CAMERA icon. 2. Use the to toggle to select the CAMERA icon of your choice and press the SELECT + button once to select. 3. Select to cycle though cameras 1 through 4 and press the SELECT + button once to select. 4. To return to continuous live view, press the MENU button.OPERATIONmylevana.com
Setting the BrightnessBrightness Mode sets the brightness of the the screen. Brightness Mode also extends the battery life. 1. To set the Brightness Mode, press the MENU button. Using the navigational arrows on the front of the monitor, highlight the BRIGHTNESS icon. 2. Use the to toggle to the your desired brightness and press the SELECT + button once to select. Sound Sensitivity SettingsSensitivity Mode allows you to adjust the sensitivity of the sound the that the camera picks up.1. To set the Sensitivity Mode, press the MENU button. Using the navigational arrows on the front of the monitor, highlight the SENSITIVITY icon. 2. Use the to toggle to the your desired sensitivity and press the SELECT + button once to select. 3. The LED Ring on the front of the monitor also indicates how loud the sound in the room is with colors.OPERATIONSOUND SENSITIVITY SETTING OFF LOW MEDIUM HIGH————————————SOUND SENSITIVITY COLORS LOW MEDIUM HIGHmylevana.com
Contacting Customer SupportCustomer Support is just a click away whenever you need it! Our customer support team can be reached by live web chat or on our website at www.mylevana.com/support. Our experts will be happy to assist you in English, French and Spanish.1. To access Customer Support, press the MENU button. Using the navigational arrows on the front of the monitor, highlight the SUPPORT icon press the SELECT + button once to select. 2. This will take you to the screen which displays our Customer Support information. Press the MENU button once to EXIT the Customer Support screen.OPERATIONmylevana.comSupport: www.mylevana.com/supportWeb: www.mylevana.comOnline Live Web Chat: www.mylevana.com
ISSUE POSSIBLE SOLUTIONEquipment does not function Ŕ Confirm that the camera and monitor are ONŔ The battery may be depleted; charge batteryŔ The power adapters may not be properly connectedNo reception Ŕ Camera and monitor may not be properly paired; follow PAIRING instructionsŔ Camera may be too far away from the monitorŔ Extend the antenna on the monitorReception Interference (static) Ŕ The camera and monitor may be too far apartŔ The battery power may be too lowŔ Other electronic devices may be interfering with the signalŔ The camera or monitor may be placed too close to many metal objectsFeedback (screeching, static) Ŕ The camera and monitor may be too close togetherŔ The volume on the monitor may be set too highNoise (static, beeping) Ŕ Battery power may be too lowThe buttons are not working Ŕ LOCK/UNLOCK Button is in LOCKED position; move to UNLOCK positionPicture works but there is no sound Ŕ Volume setting may be too low Picture is black and white Ŕ Night vision LEDs may be ON; increase the amount of light in the room being monitoredThe rechargeable battery will not chargeŔ The power adapters may not be connectedŔ Battery pack may not be properly connected inside the battery compartmentMaintenanceŔ Clean the surfaces of the camera and monitor with a soft, flu-free clothŔ If the units become dirty, use a lightly damp cloth to wipe surfaces, taking care to not allow water into any openingsŔ Never use cleaning agents or solventsTROUBLESHOOTINGmylevana.com
+13 dBmSPECIFICATIONS mylevana.comMONITOR MONITORMonitor Type TFT LCD Talk to Baby YesScreen Size 3.5” Lullabies YesResolution 320x240 Battery Type Li-IonFrame Rate 25 FPS Battery Capacity 1800 mAHLCD Brightness Adjustable: 0,1,2,3,4 Battery Connection Charging ContactFrequency 2.4GHz Battery Life (video + audio on) 10 hoursPrivate Signal Yes Battery Life (LCD o) 10 hoursTechnology Digital FHSS Battery Life (PEEP Mode) Up to 48 hoursNo. of hop/sec 300 Battery Low - Visual Warning YesNo. of hopping channels 19 Battery Low - Audible Warning YesChannel bandwidth 3.375 MHz PEEP Mode (Power Save): YesData Rate 3 Mbps Volume Indicator LED YesTransmission Power Key Lock YesMax Transmission Range 750ft Housing Material ABS PlasticOptimum Transmission Range 200ft Power Adapter Input 100~240VACExpandable Up to 4 Cameras Power Adapter 6V 800mA DC;PPN 2x Limited charge voltage 4.2VScan View Yes, 8 seconds/camera Operating Temperature 0 to 50 Degrees CelsiusSpeaker Yes Dimensions 4 ½ “ x 1” x 3 ¼” Microphone Yes Weight 0.35 lbs
FCC ID: SMH-30018PUFCC ID: SMH-32008BFCC ID: SMH-32008BSPECIFICATIONSCAMERA CAMERAImage sensor CMOS Housing Material ABS PlasticResolution 640 x 480 Wall Mountable YesViewing Angle 50 Degree Power Adapter Input 100~240VAC, 50/60Hz 150mAFocal Length 2.8mm Power Adapter 6V 800mA DCOptimal Focal Distance 2-10ft Operating Temperature 0 to 50 Degree Celsius15; Yes Dimensions 31/2 “x 4” x 4 ½” Range of Motion - Horizontal 300 Weight 0.55 lbsRange of Motion - Vertical 110Frequency 2.4GHz FCCTechnology Digital FHSSMax Transmission Range 750ftOptimum Transmission Range 200ft ICNumber of IR LEDs 8IR Wavelength 940nmNight Vision Distance 15ftBattery Operable NoMicrophone YesSpeaker Yes22mylevana.comIC: 4593A-32008BFCC ID: SMH32008B

Navigation menu