Cisco Linksys BEFCMUH4 Cable Gateway User Manual Q1 Q2 UserMan add Revised

Cisco-Linksys, LLC Cable Gateway Q1 Q2 UserMan add Revised

Contents

Additional Information for Users Manual

Download: Cisco Linksys BEFCMUH4 Cable Gateway User Manual Q1   Q2 UserMan add Revised
Mirror Download [FCC.gov]Cisco Linksys BEFCMUH4 Cable Gateway User Manual Q1   Q2 UserMan add Revised
Document ID315164
Application IDMlaLZTnwm3T8jxi261NCIg==
Document DescriptionAdditional Information for Users Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize1kB (12539 bits)
Date Submitted2003-04-02 00:00:00
Date Available2003-04-02 00:00:00
Creation Date2003-04-02 10:46:54
Producing SoftwareAcrobat PDFWriter 5.0 for Windows
Document Lastmod2003-04-02 10:48:21
Document TitleQ1 & Q2 UserMan-add Revised.doc
Document CreatorMicrosoft Word
Document Author: jack

FCC ID: PKW-BEFCMUH4 User Manual additionally:
15.21
CAUTION: Any changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
Prohibition of co-location
This device and its antenna(s) must not be co-located or operating in conjunction with any
other antenna or transmitter.
15.105 Federal Communications Commission (FCC) Requirements, Part 15
This equipment has been tested and found to comply with the limits for a class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
---Reorient or relocate the receiving antenna.
---Increase the separation between the equipment and receiver.
---Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
---Consult the dealer or an experienced radio/TV technician for help.
Caution Statement of the FCC Radio Frequency Exposure
This Wireless LAN radio device has been evaluated under FCC Bulletin OET 65C and found
compliant to the requirements as set forth in CFR 47 Sections 2.1091, 2.1093, and
15.247(b)(4) addressing RF Exposure from radio frequency devices. The radiation output
power of this Wireless LAN device is far below the FCC radio frequency exposure limits.
Nevertheless, this device shall be used in such a manner that the potential for human contact
during normal operation — as a mobile device but use in a body-worn way is strictly
prohibit. When using this device, a certain separation distance between antenna and nearby
persons has to be kept to ensure RF exposure compliance. In order to comply with the RF
exposure limits established in the ANSI C95.1 standards, the distance between the antennas
and the user should not be less than 20cm.
Regulatory information / Disclaimers
Installation and use of this Wireless LAN device must be in strict accordance with the
instructions included in the user documentation provided with the product. Any changes or
modifications (including the antennas) made to this device that are not expressly approved by
the manufacturer may void the user’s authority to operate the equipment. The manufacturer is
not responsible for any radio or television interference caused by unauthorized modification of
this device, or the substitution of the connecting cables and equipment other than
manufacturer specified. It is the responsibility of the user to correct any interference caused
by such unauthorized modification, substitution or attachment. Manufacturer and its
authorized resellers or distributors will assume no liability for any damage or violation of
government regulations arising from failing to comply with these guidelines.
MPE Statement (Safety Information)
Your device contains a low power transmitter. When device is transmitted it sends out Radio
Frequency (RF) signal.
Safety Information
CAUTION: To maintain compliance with FCC’s RF exposure guidelines, this equipment
should be installed and operated with minimum distance 20cm between the radiator and
your body. Use on the supplied antenna. Unauthorized antenna, modification, or attachments
could damage the transmitter and may violate FCC regulations.

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Create Date                     : 2003:04:02 10:46:54Z
Modify Date                     : 2003:04:02 10:48:21+08:00
Page Count                      : 1
Has XFA                         : No
Creation Date                   : 2003:04:02 10:46:54Z
Author                          : jack
Producer                        : Acrobat PDFWriter 5.0 for Windows
Mod Date                        : 2003:04:02 10:48:21+08:00
Metadata Date                   : 2003:04:02 10:48:21+08:00
Title                           : Q1 & Q2 UserMan-add Revised.doc
Creator                         : jack
EXIF Metadata provided by EXIF.tools
FCC ID Filing: PKW-BEFCMUH4

Navigation menu