Cisco Linksys WAP54G Wireless-G Access Point User Manual

Cisco-Linksys, LLC Wireless-G Access Point WAP54G user guide

a href="https://usermanual.wiki/Cisco-Linksys" itemprop="url"> Cisco Linksys >

Contents

Manual Part 2

Wireless-G Access Point6. As shown in Figure 5-5, the IP Settings screen will appear next. Enter anIP Address, Subnet Mask, and enter a unique access point name for theAccess Point appropriate to your network. Then, click the Next button tocontinue or Back to return to the previous page.•IP Address. This IP address must be unique to your network. (Thedefault IP address is 192.168.1.245.) •Subnet Mask. The Access Point’s Subnet Mask must be the same as yourEthernet network.•AP Name.Assign a name to the Access Point. Unique, memorable namesare helpful, especially if you are employing multiple access points on thesame network.9Instant Wireless® Series84. The next screen to appear, shown in Figure 5-3, will display a list of accesspoints on your network along with the status information for each accesspoint. If this is the only access point on your network, it will be the only onedisplayed. If there are more than one displayed, select the Access Point byclicking on it and click the Yes button to continue or No to exit the SetupWizard.5. You will be asked to sign on to the Access Point you’ve selected, as shownin Figure 5-4. Enter the Password you’ve assigned. If none has beenassigned, enter the default password: admin. Then, click the OK button.(This password can be changed from the Web-based Utility’s Password tab.)Figure 5-3Figure 5-4Figure 5-5
Wireless-G Access Point8. The Security Settings screen (Figure 5-7) will appear next. From thisscreen, you will set the Wired Equivalent Privacy (WEP) encryption foryour wireless network. Select a WEP configuration method and apassphrase. Click the Next button to continue or Back to return to the pre-vious page.•WEP (Disable/64-bit (10 hex digits)/128-bit (26 hex digits)). In orderto utilize WEP encryption, select the WEP setting from the pull-downmenu, 64-bit (10 hex digits) or 128-bit (26 hex digits). If you do notwish to utilize WEP encryption, make sure Disabled is selected. TheAccess Point’s WEP encryption is unique to Linksys and may conflictwith other vendors’ WEP encryption.•Passphrase. Instead of manually entering WEP keys, you can enter aPassphrase. This Passphrase is used to generate one or more WEP keys.It is case-sensitive and should not be longer than 16 alphanumeric char-acters. (The Passphrase function is compatible with Linksys wirelessproducts only. If you want to communicate with non-Linksys wirelessproducts, you will need to enter your WEP keys manually on the non-Linksys wireless products.)11Instant Wireless® Series10Figure 5-77. As shown in Figure 5-6, the Basic Settings screen will appear. Enter yourwireless network’s SSID and select the channel at which the network broad-casts its wireless signal. Then, click the Next button to continue or Back toreturn to the previous page.•SSID. The SSID is the unique name shared among all points in a wirelessnetwork. The SSID must be identical for all points in the wireless net-work. It is case sensitive, must not exceed 32 characters, and may be anykeyboard character. Make sure this setting is the same for all points inyour wireless network.•Channel. Select the appropriate channel from the list provided to corre-spond with your network settings, between 1 and 11 (in North America).All points in your wireless network must use the same channel in orderto function correctly. All points in your wireless network must use thesame channel in order to function correctly.Figure 5-6Note: The passphrase function doesn’t work when mixing othermanufacturers’ products into your wireless network. Linksys prod-ucts should always be used for optimum functionality. If usinganother company’s wireless product, set the WEP key manually.Note: WEP encryption should be used when communicating over awireless network. Wireless transmissions are unprotected and WEPencryption helps to make your wireless network safer to use.
Download:
Mirror Download [FCC.gov]
Document ID304963
Application IDvmkJj01ZR9utKT6zBO/cXQ==
Document DescriptionManual Part 2
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize303.98kB (3799711 bits)
Date Submitted2003-02-24 00:00:00
Date Available2003-02-24 00:00:00
Creation Date2003-02-21 10:20:09
Producing SoftwareAcrobat PDFWriter 4.05 for Windows NT
Document Lastmod2003-02-21 10:20:26
Document TitleWAP54G user guide.PDF
Document CreatorQuarkXPress (tm) - [WAP54G user guide.qxd]
Document Author: danw
FCC ID Filing: PKW-WAP54G

Navigation menu