Cisco Linksys WAP54G Wireless-G Access Point User Manual

Cisco-Linksys, LLC Wireless-G Access Point WAP54G user guide

a href="https://usermanual.wiki/Cisco-Linksys" itemprop="url"> Cisco Linksys >

Contents

Manual Part 3

Wireless-G Access Point21The Status tab, shown in Figure 6-8, will display current information on theAccess Point, its settings, and its performance.•Firmware Version. The current version of the Access Point’s firmware isdisplayed. Firmware should only be upgraded from the Help tab if youexperience problems with the Access Point.•AP Name. This displays the name you assigned to the Access Point.Figure 6-8The Status TabInstant Wireless® Series20Note: In Wireless Bridge mode, the Access Point can ONLY beaccessed by another access point in Wireless Bridge mode. In orderfor your other wireless devices to access the Access Point, you mustreset it to Access Point mode. The two modes are mutually exclusive. Figure 6-7
Wireless-G Access Point23Instant Wireless® Series22To view a log of the Access Point’s activity, select the Log tab, shown in Figure6-9.Log. To enable permanent logging activity, click the Enable radio buttonbeside Log. The default setting for this function is Disable.If you have chosen to monitor the Access Point’s traffic, then you can designatea PC that will receive permanent log files periodically. In the Send Log to field,enter the IP address of this PC. To view these permanent logs, you must useLogviewer software, which can be downloaded free of charge fromwww.linksys.com.To see a temporary log of the Access Point’s most recent activities, click theView Log button.Click the Apply button to apply your changes or Cancel to cancel yourchanges. If you require online help, click the Help button.The Log TabFigure 6-9LAN •MAC Address. The MAC Address of the LAN interface is displayed here.•Configuration Type. This displays how the Access Point is assigned an IPaddress, either Automatic Configuration - DHCP, if assigned by DHCPserver, or Static IP Address and its IP Address, Subnet Mask, and DefaultGateway address, if assigned by Static IP Address server. •IP Address. This IP address is the unique IP address of the Access Point.•Subnet Mask. The Access Point’s Subnet Mask (also known as an IPMask), matches the Subnet Mask of your Ethernet network.Wireless•MAC Address. The MAC Address of the LAN interface is displayed here.•SSID. The unique name shared among all points in your wireless networkis displayed here.•Mode. The Access Point’s mode is displayed here.•Channel. The wireless channel shared by all wireless devices connected tothis Access Point is displayed here.•Encryption Function. The encryption method you chose in the SetupWizard or changed from the Setup tab of this Web-based Utility is displayedhere.•Send and Receive. The Send and Receive fields display the number of suc-cessful or dropped packets that have been sent or received. Some packetloss is normal in wireless networking.
Download:
Mirror Download [FCC.gov]
Document ID304964
Application IDvmkJj01ZR9utKT6zBO/cXQ==
Document DescriptionManual Part 3
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize159.68kB (1995943 bits)
Date Submitted2003-02-24 00:00:00
Date Available2003-02-24 00:00:00
Creation Date2002-12-10 18:09:22
Producing SoftwareAcrobat PDFWriter 4.05 for Windows NT
Document Lastmod2003-02-21 10:21:47
Document TitleWAP54G user guide.PDF
Document CreatorQuarkXPress (tm) - [WAP54G user guide.qxd]
Document Author: danw
FCC ID Filing: PKW-WAP54G

Navigation menu