Cisco Linksys WMP55AG Dual-Band A+G Wireless Network PCI Adapter User Manual WMP55AG UG Rev NC

Cisco-Linksys, LLC Dual-Band A+G Wireless Network PCI Adapter WMP55AG UG Rev NC

User manual

Instant Wireless®Series Dual-Band Wireless A+GPCI AdapterUse this guide to install:WMP55AGUser Guide
COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. Copyright © 2003 Linksys, All RightsReserved.  Instant Wireless, Linksys, and the Linksys logo are registered trademarks ofLinksys Group, Inc. Microsoft, Windows, and the Windows logo are registered trade-marks of Microsoft Corporation.  All other trademarks and brand names are the proper-ty of their respective proprietors. LIMITED WARRANTY Linksys guarantees that every Instant Wireless®Dual-Band Wireless A+G PCI Adapterwill be free from physical defects in material and workmanship for one year from the dateof purchase, when used within the limits set forth in the Specifications chapter of thisUser Guide.  TThhiiss  WWaarrrraannttyy  iiss  vvaalliidd  aanndd  mmaayy  bbee  pprroocceesssseedd  oonnllyy  iinn  tthhee  ccoouunnttrryy  ooff  ppuurrcchhaassee..If the product proves defective during this warranty period, go to the Linksys website atwww.linksys.comfor complete RMA (Return Merchandise Authorization) assistance. Youcan also call Linksys Technical Support in order to obtain a RMA Number. BE SURE TOHAVE YOUR PROOF OF PURCHASE AND A BARCODE FROM THE PRODUCT’S PACK-AGING ON HAND WHEN CALLING. RETURN REQUESTS CANNOT BE PROCESSEDWITHOUT PROOF OF PURCHASE. When returning a product, mark the RMA Numberclearly on the outside of the package and include a copy of your original proof of pur-chase. All customers located outside of the United States of America and Canada shallbe held responsible for shipping and handling charges.IN NO EVENT SHALL LINKSYS'S LIABILITY EXCEED THE PRICE PAID FOR THE PROD-UCT FROM DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAM-AGES RESULTING FROM THE USE OF THE PRODUCT, ITS ACCOMPANYING SOFT-WARE, OR ITS DOCUMENTATION. LINKSYS OFFERS NO REFUNDS FOR ITS PROD-UCTS.  Linksys makes no warranty or representation, expressed, implied, or statutory,with respect to its products or the contents or use of this documentation and all accom-panying software, and specifically disclaims its quality, performance, merchantability, orfitness for any particular purpose. Linksys reserves the right to revise or update its prod-ucts, software, or documentation without obligation to notify any individual or entity.Please direct all inquiries to:Linksys  P.O. Box 18558, Irvine, CA 92623.   SAFETY AND REGULATORY NOTICESFCC STATEMENTThe Instant Wireless Dual-Band Wireless A+G PCI Adapter has been tested and foundto comply with the specifications for a Class B digital device, pursuant to Part 15 of theFCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that maycause undesired operation.These limits are designed to provide reasonable protection against harmful interferencein a residential installation. This equipment generates, uses, and can radiate radio fre-quency energy and, if not installed and used according to the instructions, may causeharmful interference to radio communications. However, there is no guarantee that inter-ference will not occur in a particular installation. If this equipment does cause harmfulinterference to radio or television reception, which is found by turning the equipment offand on, the user is encouraged to try to correct the interference by one or more of thefollowing measures:• Reorient or relocate the receiving antenna• Increase the separation between the equipment or devices• Connect the equipment to an outlet other than the receiver's• Consult a dealer or an experienced radio/TV technician for assistanceFCC Caution: Any change or modification to the product not expressly approved byLinksys could void the user's authority to operate the device.FCC Caution: Operation within the 5150 to 5250GHz band is restricted to indoor use only.FCC RF Radiation Exposure StatementTo comply with the FCC and ANSI C95.1 RF exposure limits, the antenna(s) for thisdevice must comply with the following:• Access points with 2.4 GHz or 5 GHz integrated antenna must operate with a sepa-ration distance of at least 20 cm from all persons using the cable provided and mustnot be co-located or operating in conjunction with any other antenna or transmitter.End-users must be provided with specific operations for satisfying RF exposure compli-ance.Note: Dual antennas used for diversity operation are not considered co-located.INDUSTRY CANADA (CANADA)This Class B digital apparatus complies with Canadian ICES-003.Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.The use of this device in a system operating either partially or completely outdoors mayrequire the user to obtain a license for the system according to the Canadian regulations.EC DECLARATION OF CONFORMITY (EUROPE)Linksys Group declares that the Instant Wireless®Series products included in the InstantWireless®Series conform to the specifications listed below, following the provisions of theEuropean R&TTE directive 1999/5/EC, EMC directive 89/336/EEC, and Low Voltagedirective 73/23/EEC:  For 11Mbps, 2.4 GHz devices with 100 mW radios, the following standards were applied: • ETS 300-826, 301 489-1 General EMC requirements for Radio equipment.• EN 609 50 Safety• ETS 300-328-2 Technical requirements for Radio equipment.For 54Mbps, 5 GHz devices with 40 mW radios, the following standards were applied: • ETS 301 489-1, 301 489-17 General EMC requirements for Radio equipment.• EN 609 50 Safety• ETS 301-893 Technical requirements for Radio equipment.Caution: The frequencies used by 802.11a wireless LAN devices are not yet harmonizedwithin the European community, 802.11a products are designed for use only in specificcountries, and are not allowed to be operated in countries other than those of designat-ed use. Contact local Authority for procedure to follow.Caution: This equipment is intended to be used in all EU and EFTA countries. Outdooruse may be restricted to certain frequencies and/or may require a license for operation.Contact local Authority for procedure to follow.
Table of ContentsChapter 1: Introduction 1The Dual-Band Wireless A+G PCI Adapter 1Features 1Chapter 2: Planning Your Wireless Network 2Network Topology 2Ad-Hoc versus Infrastructure Mode 2Chapter 3: Getting to Know the Dual-Band Wireless A+G PCI Adapter 4The Dual-Band Wireless A+G PCI Adapter’s LEDs 4Chapter 4: Installation and Configurationfor Windows XP 5Overview 5Hardware Installation 5Driver Installation for Windows XP 6Windows XP Wireless Zero Configuration 8Chapter 5: Installation and Configurationfor Windows 98, Me, and 2000 10Overview 10Software Installation for Windows 98, Me, and 2000 10Hardware Installation 15Note: Combinations of power levels and antennas resulting in a radiated power level ofabove 100 mW equivalent isotropic radiated power (EIRP) are considered as not com-pliant with the above mentioned directive and are not allowed for use within the Europeancommunity and countries that have adopted the European R&TTE directive 1999/5/ECand/or the CEPT recommendation Rec 70.03. For more details on legal combinations of power levels and antennas, contact LinksysCorporate Compliance.• Linksys Group vakuuttaa täten että Instant Wireless Dual-Band Wireless A+G PCIAdapter tyyppinen laite on direktiivin 1999/5/EY, direktiivin 89/336/EEC ja direktiivin73/23/EEC oleellisten vaatimusten ja sitä koskevien näiden direktiivien muiden ehto-jen mukainen.• Linksys Group déclare que la Instant Wireless Dual-Band Wireless A+G PCI Adapterest conforme aux conditions essentielles et aux dispositions relatives à la directive1999/5/EC, la directive 89/336/EEC, et à la directive 73/23/EEC.• Belgique B L'utilisation en extérieur est autorisé sur le canal 11 (2462 MHz), 12 (2467MHz), et 13 (2472 MHz). Dans le cas d'une utilisation privée, à l'extérieur d'un bâti-ment, au-dessus d'un espace  public, aucun enregistrement n'est nécessaire pourune distance de moins de 300m. Pour une distance supérieure à 300m un enreg-istrement auprès de l'IBPT est requise. Pour une utilisation publique à l'extérieur debâtiments, une licence de l'IBPT est requise. Pour les enregistrements et licences,veuillez contacter l'IBPT.• France F: 2.4 GHz Bande : les canaux 10, 11, 12, 13 (2457, 2462, 2467, et 2472 MHz respec-tivement) sont complétement libres d'utilisation en France (en utilisation intérieur).Pour ce qui est des autres canaux, ils peuvent être soumis à autorisation selon ledépartment. L'utilisation en extérieur est soumis à autorisation préalable et trèsrestreint. 5 GHz Bande: Conformément aux décisions de la CEPT, l'utilisation des fréquencesde la bande 5150 MHz - 5350 MHz est autorisée à l'intérieur des bâtiments avec unepuissance maximale de 200 mW, et interdite en extérieur. La bande 5470 MHz - 5725MHz n'est pas ouverte aujourd'hui. Vous pouvez contacter l'Autorité de Régulation des Télécommunications(http://www.art-telecom.fr) pour de plus amples renseignements.2.4 GHz Band: only channels 10, 11, 12, 13 (2457, 2462, 2467, and 2472 MHzrespectively) may be used freely in France for indoor use. License required for out-door installations.5 GHz Band: frequencies in the 5150 MHz - 5350 MHz band may be used indoorwith maximum power of 200 mW. Their use is forbidden outdoors. The 5470 MHz -5725 MHz band is not currently open.Please contact ART (http://www.art-telecom.fr) for procedure to follow.• Deutschland D: Anmeldung im Outdoor-Bereich notwending, aber nicht genehmi-gungspflichtig. Bitte mit Händler die Vorgehensweise abstimmen.• Germany D: License required for outdoor installations. Check with reseller for proce-dure to follow.• Italia I: E' necessaria la concessione ministeriale anche per l'uso interno. Verificarecon i rivenditori la procedura da seguire. L'uso per installazione in esterni non e' per-messa.• Italy I: License required for indoor use. Use with outdoor installations not allowed.• The Netherlands NL License required for outdoor installations. Check with reseller forprocedure to follow.• Nederlands NL Licentie verplicht voor gebruik met buitenantennes. Neem contact opmet verkoper voor juiste procedure.WMP55AG-UG-30214NC JL
Dual-Band Wireless A+G PCI AdapterChapter 1: IntroductionThe Linksys Dual-Band Wireless A+G PCI Adapter installs in most desktopsand lets you put your computer almost anywhere in the building, without thecost and hassle of running network cables.  Now you don’t have to drill holesin your walls and climb through the attic or cellar to get connected to the net-work.  Once you’re connected, you can keep in touch with your e-mail, accessthe Internet, use instant messaging to chat with friends, and share files andother resources such as printers and network storage with other computers onthe network.The Dual-Band Wireless A+G PCI Adapter connects you with Wireless-A(802.11a) and Wireless-G (draft 802.11g) networks at an incredible 54Mbps!And for added versatility, it can also interoperate with all the 11Mbps Wireless-B (802.11b) products found in homes, businesses, and public wireless hotspotsaround the country.  And whichever mode you choose, your wireless commu-nications are protected by up to 152-bit encryption, so your data stays secure.So don’t hassle with running cables through your house—get your desktop con-nected the easy way with the versatile Linksys Dual-Band Wireless A+G PCIAdapter.• One Adapter Connects to Either 2.4GHz (802.11b or Draft 802.11g) or5GHz (802.11a) Networks• Advanced Security Features with up to 152-Bit WEP Encryption• Easy-to-Use Setup Wizard • Detailed Monitoring and Performance Utility• IEEE 802.11a, 802.11b, and Draft 802.11g Compliant• Free Technical Support—24 Hours a Day, 7 Days a Week, Toll-Free USCalls• 1-Year Limited WarrantyThe Dual-Band Wireless A+G PCI AdapterFeatures1Chapter 7: Using the WLAN Monitor forWindows 98, Me, and 2000 16Overview 16Starting the WLAN Monitor 16Link Information 17Site Survey 19Profiles 21Creating a New Profile 23Appendix A: Troubleshooting 29Common Problems and Solutions 29Frequently Asked Questions 29Appendix B: Glossary 32Appendix C: Specifications 40Environmental 41Appendix D: Warranty Information 42Appendix E: Contact Information 43
Dual-Band Wireless A+G PCI AdapterInstant Wireless®SeriesIf the wireless network is relatively small and needs to share resources onlywith the other computers on the wireless network, then the ad-hoc mode canbe used. (See Figure 2-2.) Ad-hoc mode allows computers equipped with wire-less transmitters and receivers to communicate directly with each other, elimi-nating the need for an access point.  The drawback of this mode is that, in Ad-Hoc mode, wireless-equipped computers are not able to communicate withcomputers on a wired network. And, of course, communication between thewireless-equipped computers is limited by the distance and interference direct-ly between them.32Figure 2-2Chapter 2: Planning Your WirelessNetworkA wireless local area network (WLAN) is exactly like a regular local area net-work (LAN), except that each computer in the WLAN uses a wireless device toconnect to the network. Computers in a WLAN share the same frequency chan-nel and SSID, which is an identification name for wireless devices.Unlike wired networks, wireless networks have two different modes in whichthey may be set up: infrastructure and ad-hoc.  An infrastructure configura-tion is a WLAN and wired LAN communicating to each other through anaccess point. An ad-hoc configuration is wireless-equipped computers com-municating directly with each other. Choosing between these two modesdepends on whether or not the wireless network needs to share data or periph-erals with a wired network or not.If the computers on thewireless network need tobe accessed by a wirednetwork or need to share aperipheral, such as a print-er, with the wired networkcomputers, the wirelessnetwork should be set upin  infrastructure  mode.(See Figure 2-1.) Thebasis of infrastructuremode centers around anaccess point, which servesas the main point of communications in a wireless network.  Access pointstransmit data to PCs equipped with wireless network cards, which can roamwithin a certain radial range of the access point.  Multiple access points can bearranged to work in succession to extend the roaming range, and can be set upto communicate with your Ethernet (wired) hardware as well. Network TopologyAd-Hoc versus Infrastructure ModeFigure 2-1
Dual-Band Wireless A+G PCI Adapter5Instant Wireless®Series4Chapter 3: Getting to Know theDual-Band Wireless A+G PCIAdapterLED IndicatorsLINK Green. The LINK LED lights up when there is a wirelessnetwork connection. It will flash when there is activity.PWR Green. The PWR LED lights up when the Adapter is pow-ered on.The Dual-Band Wireless A+G PCI Adapter’s LEDsFigure 3-1Chapter 4: Installation andConfiguration for Windows XPAfter installing the Dual-Band Wireless A+G PCI Adapter in your computer,you will install the driver and configure the Adapter.1. Turn off your desktop PC.  2. Open your PC’s case, and locate an available PCI slot on the motherboard.Check with your computer’s manufacturer if you need instructions.3. Slide the Adapter into thePCI slot, as shown inFigure 4-1. Make sure thatall of its pins are touchingthe slot’s contacts. Youmay have to apply a bit ofpressure to slide theAdapter all the way in.4. After the Adapter is setfirmly in place, secure itsfastening tab to your PC’schassis with a mountingscrew. Then close your PC’s case.5. Rotate the antenna so that it is positioned straight up and perpendicular tothe horizon. This will ensure optimum wireless operating range and per-formance.6. Power on your desktop PC.Proceed to the next section, “Driver Installation for Windows XP.”Important for Windows 98, Me, and 2000 users: Go to “Chapter 5:Installation and Configuration for Windows 98, Me, and 2000.”Figure 4-1OverviewHardware Installation
Dual-Band Wireless A+G PCI Adapter7Instant Wireless®Series62. Windows will notify you that the driver has not passed Windows Logo test-ing. This is normal, and it has been verified that the Adapter does work withWindows XP. Click the Continue Anyway button.3. After Windows has finished installing the driver, click the Finish button.You have now completed the driver installation forthe Dual-Band Wireless A+G PCI Adapter. To configure the Adapter,proceed to the next section, “Windows XP Wireless Zero Configuration.”Figure 4-4Figure 4-51. Windows XP will automatically detect the Adapter. Click the radio buttonnext to Install the software automatically (Recommended). Insert theSetup Wizard CD-ROM into your computer’s CD-ROM drive. Then click theNext button.Important for Windows XP users: Do NOT run the Dual-BandWireless A+G PCI Adapter Setup Wizard. If the Setup Wizard runsautomatically after the Setup Wizard CD-ROM has been inserted,click the Exit tab.Figure 4-3Driver Installation for Windows XP
Dual-Band Wireless A+G PCI Adapter3. If WEP is enabled, thescreen in Figure 4-8 willappear. Enter the WEPkey of your wireless net-work in the Network keyfield, and re-enter it in theConfirm network keyfield. Then click Connect,and go to Step 4.4. The screen in Figure 4-9will appear if your con-nection is active.For more information about wireless networking on a Windows XP computer,click  Start and then Help and Support. Enter the keyword wireless in thefield provided, and press the Enter key.Congratulations! The installation of the Dual-Band Wireless A+G PCI Adapter is complete.9Instant Wireless®Series8Figure 4-8Figure 4-91. After installing theAdapter, the Windows XPWireless ZeroConfiguration icon willappear in your computer’ssystem tray. Double-clickthe icon.2. The screen that appears will show any available wireless network. Select thenetwork you want. If this network has WEPencryption disabled, go toStep 3.If this network does nothave WEP encryptionenabled, then Figure 4-7will appear. Make surethe box next to Allow meto connect to the selectedwireless network, eventhough it is not secure ischecked. Then click theConnect button, and goto Step 4.Windows XP Wireless Zero ConfigurationImportant for Windows XP users: Windows XP has a built-in con-figuration tool. Use the Windows XP Wireless Zero Configuration (inthe system tray at the bottom of your screen) to configure the Adapter.Figure 4-6Note: These instructions are for Windows XP with Service Pack 1installed. If you have not installed Service Pack 1, select the network you want,and click the Connect  button. If the network has WEP encryptionenabled, enter the WEP key in the Network key field, and then click theConnect button.Figure 4-7
Dual-Band Wireless A+G PCI Adapter11Instant Wireless®Series102. To install the Adapter, click the Install button on the Welcome screen.3. After reading the Warranty Policy, shown in Figure 5-2, click the Next but-ton if you agree, or click the Cancel button to end the installation.4. Next you will choose your type of wireless network. If you will connect toboth 802.11a and 54g networks, select 5GHz + 2.4GHz. If you will connectto only 802.11a, select 5GHz. If you will connect to only 54g, select2.4GHz. Click the Next button to continue.Figure 5-2Figure 5-3Chapter 5: Installation andConfiguration for Windows 98, Me,and 2000The Dual-Band Wireless A+G PCI Adapter Setup Wizard will guide youthrough the installation and configuration procedure for Windows 98, Me, and2000. Then you will install the Adapter in your computer.1. Insert the Setup Wizard CD-ROM into your CD-ROM drive. The SetupWizard should run automatically, and Figure 5-1 should appear.  If it doesnot, click the Start button and choose Run. In the field that appears, enterD:\setup.exe (where “D” is the letter of your CD-ROM drive).  •Install - Click the Install button to begin the software installation process. •User Guide - Click the User Guide button to open the PDF file of this UserGuide. •Exit - Click the Exit button to exit the Setup Wizard.Figure 5-1Important for Windows XP users: Go to “Chapter 4:  Installationand Configuration for Windows XP.”Overview   Software Installation for Windows 98, Me, and 2000
Dual-Band Wireless A+G PCI Adapter13Instant Wireless®Series126. If you chose Infrastructure Mode,go to Step 7 now. If you chose Ad-HocMode, the Ad-Hoc Mode Setting screen, shown in Figure 5-5, will appear. The channel you choose should match the channel set on the other devicesin your wireless network. Select the channel you plan to use for your 802.11aor 54g network from the appropriate drop-down menu. If you want the net-work to automatically choose a channel for you, then select Auto.Click the Next button to continue.Figure 5-55. Next you will choose a wireless mode for your network. Click theInfrastructure Mode radio button if you want your wireless computers tonetwork with computers on your wired network using an access point. Clickthe Ad-Hoc Mode radio button if you want multiple wireless computers tonetwork directly with each other. In the SSID field, enter the SSID of your wireless network. The SSID mustbe identical for all devices in the network. The default setting is linksys (alllowercase). Click the Next button.Figure 5-4Note: If you chose 5GHz + 2.4GHz in Step 4 for connection to both802.11a and 54g networks, then go to Step 6. The Adapter will auto-matically select the best channel for you.
Dual-Band Wireless A+G PCI Adapter15Instant Wireless®Series141. Turn off your desktop PC.  2. Open your PC’s case, and locate an available PCI slot on the motherboard.Check with your computer’s manufacturer if you need instructions.3. Slide the Adapter into thePCI slot, as shown inFigure 5-8. Make sure thatall of its pins are touchingthe slot’s contacts. Youmay have to apply a bit ofpressure to slide theAdapter all the way in.4. After the Adapter is setfirmly in place, secure itsfastening tab to your PC’schassis with a mountingscrew. Then close your PC’s case.5. Rotate the antenna so that it is positioned straight up and perpendicular tothe horizon. This will ensure optimum wireless operating range and per-formance.6. Power on your desktop PC.7. Windows will detect the new hardware and begin installing the driver filesin your operating system. For Windows 2000 users, you may be informed that a digital signature has notbeen found after Windows detects the new hardware. This is normal, and it hasbeen verified that the Adapter does work with Windows 2000. Click the Ye sbutton to continue.Congratulations! The installation of the Dual-Band Wireless A+G PCIAdapter is complete.If you want to check the link information, search for available wirelessnetworks, or make additional configuration changes, proceed to“Chapter 6: Using the WLAN Monitor for Windows 98, Me, and 2000.”Figure 5-8Hardware Installation 7. Review your settings before the Setup Wizard starts to copy your files. Clickthe Next button to continue.8. After the files have been successfully copied, the screen in Figure 5-7 willappear. Click the Exit button.Proceed to the next section, “Hardware Installation.”Figure 5-7Figure 5-6
Dual-Band Wireless A+G PCI AdapterThe  Link Information screen displays the Adapter’s signal strength and linkquality information. Click the More information button for further informationabout your wireless connection (see Figure 6-4).Ad-Hoc Mode or Infrastructure Mode - The screen indicates whether theAdapter is currently working in ad-hoc or infrastructure mode. Signal Strength - The Signal Strength bar indicates the strength of theAdapter’s signal. Link Quality - The Link Quality bar indicates the quality of the wireless net-work connection.Click the More Information button to view more information about the wire-less network connection.Click the X (Close) button in the upper right corner to exit the WLAN Monitor.17Instant Wireless®Series16Link InformationFigure 6-3Chapter 6: Using the WLAN Monitorfor Windows 98, Me, and 2000Use the WLAN Monitor to check the link information, search for availablewireless networks, or make additional configuration changes.After installing the Adapter, the Dual-Band Wireless A+G PCIAdapter WLAN Monitor icon (see Figure 6-1) will appear in thesystem tray, which is located at the bottom righthand corner ofyour screen. The top lefthand corner of the icon will light up blueif the Adapter is installed and active. Its bottom righthand corner will light upyellow if the Adapter is connected to a wireless screen. The icon will remaindim if the Adapter is not installed or is disabled.Double-click the WLAN Monitor icon, and the Link Information screen willappear. From this screen, you can find out how strong the Adapter’s wirelesssignal is and how good the connection’s quality is. Click the MoreInformation button to view additional status information about the currentwireless connection. To search for available wireless networks, click the SiteSurvey tab. To perform configuration changes, click the Profiles tab.Figure 6-1Figure 6-2Important for Windows XP users: Windows XP has a built-in configuration tool. Use the Windows XP Wireless Zero Configuration (inthe system tray at the bottom of your screen) to configure the Adapter.See “Chapter 4: Installation and Configuration for Windows XP.”Starting the WLAN MonitorOverview
Dual-Band Wireless A+G PCI Adapter19Instant Wireless®Series18The  Site Survey screen displays a list of infrastructure and ad-hoc networksavailable for connection.  SSID - The SSID of the wireless network. Type - The type of wireless connection. A means 802.11a, and B means802.11b. G indicates 54g.Signal - The quality of signal strength: Poor, Fair, Good, or Excellent.Site InformationNetwork Mode - The wireless mode currently in use.Channel - The channel to which the wireless network devices are set. WEP - The status of the WEP encryption security feature.MAC - The MAC address of the wireless network’s access point.Surveyed at - The time at which the wireless network was scanned. Refresh - Click the Refresh button to perform a new search for wirelessdevices. Connect - To connect to one of the networks on the list, select the wireless net-work,and click the Connect button. If the wireless network has WEP encryp-tion enabled for security, you will see the screen shown in Figure 6-7.Figure 6-6Site SurveyWireless Network StatusStatus- The status of the wireless network connection.SSID - The SSID of the wireless network.Network Mode - The wireless mode currently in use, ad-hoc or infrastructure.Transfer Rate - The data transfer rate of the current connection.Channel - The channel to which the wireless network devices are set. WEP - The status of the WEP encryption security feature.MAC - The MAC address of the wireless network’s access point.TCP/IP SettingIP Address - The IP Address of the Adapter.Subnet Mask - The Subnet Mask of the Adapter.Default Gateway - The Default Gateway address of the Adapter.DNS - The DNS address of the Adapter.DHCP - The status of the DHCP client.Click the Save to Profile button to save thecurrent settings in a profile. Enter a namefor the profile (see Figure 6-5), and thenclick the OK button.Signal Strength - This indicates the strength of the Adapter’s signal.Link Quality - This indicates the quality of the wireless network connection.Click the Back button to return to the initial Link Information screen.Click the X (Close) button in the upper right corner to exit the WLAN Monitor.Figure 6-4Figure 6-5
Dual-Band Wireless A+G PCI Adapter21Instant Wireless®SeriesIn the WEP Level drop-down box, select the level of WEP encryption used bythe wireless network: 64-bit / 10  hex. characters, 128-bit / 26  hex. charac-ters, or 152-bit  / 32  hex. characters (152-bit WEP is only available for802.11a networking).If the wireless network uses a passphrase, and you’re using 64-bit or 128-bitWEP encryption, enter the passphrase in the Passphrase field. If the wirelessnetwork uses a WEP key, enter the WEP key in the Key 1 field. Click the OK button to complete the network connection and return to the LinkInformation screen, or click the Cancel button to cancel the network connec-tion and return to the Site Survey screen.On the Site Survey screen, click the X (Close) button in the upper right cornerto exit the WLAN Monitor.20The Profiles screen lets you save different configuration profiles for differentnetwork setups. You can also import or export profiles. The default profileholds the configuration saved when you installed the Adapter.Profile Name - The name of the profile. SSID - The SSID of the wireless network. Site InformationWireless Type - The type of wireless connection: 802.11a, 54g, or both.Network Mode - The network mode: Ad-Hoc or Infrastructure.Transfer Rate -  The Adapter is set to Auto mode, so it will dynamically shiftto the fastest data transfer rate possible at any given time.Channel - The channel to which the wireless network devices are set. WEP - The status of the WEP encryption security feature.Connect - To connect to a wireless network using a specific profile, select theprofile’s SSID,and click the Connect button. Edit - Select the profile’s name, and click the Edit button to change an exist-ing profile.New - Click the New button to create a new profile. See the next section,“Creating a New Profile.”Figure 6-8ProfilesFigure 6-7Note: If you chose 152-bit  / 32 hex. characters WEP encryption, youmust manually enter a WEP key. You cannot use a passphrase.
Dual-Band Wireless A+G PCI Adapter23Instant Wireless®SeriesImport - Click the Import button to import a profile that has been saved inanother location. Select the appropriate file, and click the Open button.Export - Select the profile you want to save in a different location, and clickthe Export button. Select the appropriate folder, and click the Save button.Delete - Select a profile, then click the Delete button to delete a profile. Click the X (Close) button in the upper right corner to exit the WLAN Monitor.221. On the Profiles screen, click the New button to create a new profile.2. The Profile Wizard screen appears next. Enter the Profile Name in the fieldprovided, and then select one of three wireless network types. Select the2.4GHz + 5 GHz  if you will connect to both 802.11a and 54g networks.Select 5GHz if you will only connect to 802.11a networks. Select the 2.4GHz if you will only connect to 54g networks. Then click the Next button.Creating a New ProfileFigure 6-11Figure 6-12Figure 6-9Figure 6-10Note: If you want to export more than one profile, you have to exportthem one at a time.
Dual-Band Wireless A+G PCI Adapter25Instant Wireless®Series244. The Network Mode screen shows a choice of two network modes. Click theInfrastructure Mode radio button if you want your wireless computers tocommunicate with computers on your wired network via an access point.Click the Ad-Hoc Mode radio button if you want multiple wireless com-puters to communicate directly with each other. Then, enter the SSID foryour wireless network in the SSID field. Click the Next button.Infrastructure Mode - This mode allows wireless and wired networks tocommunicate through an access point.Ad-Hoc Mode - This mode allows wireless-equipped computers to com-municate directly with each other. No access point is used.SSID - The SSID is the unique name shared by all devices in a wirelessnetwork. The SSID must be identical for all devices in the wireless network.It is case-sensitive and must not exceed 32 characters (use any of the char-acters on the keyboard). Make sure this setting is the same for all devices inyour wireless network.Figure 6-143. The Network Settings screen will appear.If your network has a DHCP server, click the radio button next to Obtainan IP address automatically (DHCP). Click the Next button to continue,and go to Step 4.If your network does not have a DHCP server, click the radio button next toSpecify IP Settings. Enter an IP Address,  Subnet Mask,  DefaultGateway, and DNS appropriate for your network. You must specify the IPAddress and Subnet Mask on this screen. If you are unsure about theDefault Gateway and DNS addresses, then leave these fields alone. Click the Next button to continue, and go to Step 4.IP Address - This IP Address must be unique to your network. Subnet Mask - The Adapter’s Subnet Mask must be the same as your wirednetwork’s Subnet Mask.Default Gateway - Enter the IP address of your network’s Gateway. DNS - Enter the DNS server addresses used by your ISP. Figure 6-13
Dual-Band Wireless A+G PCI AdapterPassphrase  - Instead of manually entering WEP keys, you can enter aPassphrase, so a WEP key is automatically generated if you chose 64-bit /10 hex. characters or 128-bit / 26 hex. characters WEP encryption. Thepassphrase is case-sensitive and should not be longer than 16 alphanumericcharacters. This passphrase must match the passphrase of your wireless net-work and is compatible with Linksys wireless products only. (You will haveto enter the WEP key(s) manually on any non-Linksys wireless products.)WEP Key - This WEP key must match the WEP key of your wireless net-work. If you are using 64-bit WEP encryption, then the key must consist ofexactly 10 hexadecimal characters. If you are using 128-bit WEP encryp-tion, then the key must consist of exactly 26 hexadecimal characters. If youare using 152-bit WEP encryption, then the key must consist of exactly 32hexadecimal characters. Valid hexadecimal characters are “0” to “9” and“A” to “F”.Key Index - If you are using an access point and need to match its transmitkey, choose the appropriate key number from the drop-down menu.27Instant Wireless®Series26Figure 6-16Note: If you chose 152-bit / 32 hex. characters WEP encryption, youmust manually enter a WEP key. You cannot use a passphrase. 5. If you chose Infrastructure mode, proceed to Step 6. If you chose Ad-Hocmode, the Ad-Hoc Mode Setting screen, Figure 6-15, will appear.From the drop-down menu, select the channel you plan to use for your net-work. If you want the network to automatically choose a channel for you,then select Auto. Click the Next button to continue. 6. The Security Settings screen will appear (see Figure 6-16). Enable or dis-able Wired Equivalent Privacy (WEP) encryption for your wireless net-work. If you enable WEP, select the level of WEP encryption, and then entera Passphrase or WEP key. If you want to disable WEP encryption, selectDisable. Click the Next button to continue.WEP Level (Disable/64-bit WEP/128-bit WEP/152-bit WEP) - If you donot want to use WEP encryption, choose Disabled. To use WEP encryption(recommended to increase network security), select 64-bit / 10 hex. char-acters, 128-bit / 26  hex. characters, or 152-bit / 32 hex. characters fromthe drop-down menu. Then enter either a Passphrase or WEP key. Figure 6-15Note: 152-bit / 32 hex. characters WEP encryption is available only for802.11a networking.Note: If you chose 5GHz + 2.4GHz in Step 2 for connection to both802.11a and 54g networks, then go to Step 6. The Adapter will auto-matically select the best channel for you.
Dual-Band Wireless A+G PCI Adapter29Appendix A: TroubleshootingThis chapter provides solutions to problems that may occur during the installa-tion and operation of the Dual-Band Wireless A+G PCI Adapter. Read thedescriptions below to solve your problems. If you can’t find an answer here,check the Linksys website at www.linksys.com.1.The Dual-Band Wireless A+G PCI Adapter does not work properly.• Power off your PC.• Reinsert the Adapter into the PC’s PCI slot. • For Windows 98 or Me, right-click My Computer, and select Properties.Select the Device Manager tab, and select the Adapter. You will find theAdapter if it has been installed successfully. If you see a yellow exclamationmark, the resources may be in conflict, and you must follow the steps below:• Uninstall the driver software from your PC.• Restart your PC and repeat the hardware and software installation as spec-ified in this User Guide.2.I cannot communicate with a wired computer linked via an access point in theinfrastructure configuration.• Make sure that the PC is powered on.• Make sure that the Dual-Band Wireless A+G PCI Adapter is configured withthe same SSID and WEP encryption as the other computers in your wirelessnetwork.Can I run an application from a remote computer over the wireless network?This will depend on whether or not the application is designed to be used overa network. Consult the application’s user guide to determine if it supports oper-ation over a network.Can I play computer games with other members of the wireless network?Yes, as long as the game supports multiple players over a LAN (local area net-work). Refer to the game’s user guide for more information.What is the IEEE 802.11a standard?It is one of the IEEE standards for wireless networks. The 802.11a standardallows wireless networking hardware from different manufacturers to commu-nicate, provided that the hardware complies with the 802.11a standard. TheCommon Problems and SolutionsFrequently Asked QuestionsInstant Wireless®Series287. The  Confirm New Settings screen will appear. To save the new settings,click the Save button. To cancel the settings and return to the Profiles screenwithout saving your changes, click the Cancel button. To edit the new set-tings, click the Back button.8. The Congratulations screen will appear next. Click Activate new settingsnow to implement the new settings immediately and return to the LinkInformation screen. Click Activate new setting later to keep the currentsettings active and return to the Profiles screen. You have successfully created a connection profile. Click the X (Close)button in the upper right corner to exit the WLAN Monitor.Figure 6-17Figure 7-18
Dual-Band Wireless A+G PCI Adapter31Instant Wireless®Series30What is Spread Spectrum?Spread Spectrum technology is a wideband radio frequency technique devel-oped by the military for use in reliable, secure, mission-critical communica-tions systems. It is designed to trade off bandwidth efficiency for reliability,integrity, and security. In other words, more bandwidth is consumed than in thecase of narrowband transmission, but the trade-off produces a signal that is, ineffect, louder and thus easier to detect, provided that the receiver knows theparameters of the spread-spectrum signal being broadcast. If a receiver is nottuned to the right frequency, a spread-spectrum signal looks like backgroundnoise. There are two main alternatives, Direct Sequence Spread Spectrum(DSSS) and Frequency Hopping Spread Spectrum (FHSS).What is DSSS? What is FHSS? And what are their differences?Frequency-Hopping Spread-Spectrum (FHSS) uses a narrowband carrier thatchanges frequency in a pattern that is known to both transmitter and receiver.Properly synchronized, the net effect is to maintain a single logical channel. Toan unintended receiver, FHSS appears to be short-duration impulse noise.Direct-Sequence Spread-Spectrum (DSSS) generates a redundant bit patternfor each bit to be transmitted. This bit pattern is called a chip (or chippingcode). The longer the chip, the greater the probability that the original data canbe recovered. Even if one or more bits in the chip are damaged during trans-mission, statistical techniques embedded in the radio can recover the originaldata without the need for retransmission. To an unintended receiver, DSSSappears as low power wideband noise and is rejected (ignored) by most nar-rowband receivers. Would the information be intercepted while transmitting on air?WLAN features two-fold protection in security. On the hardware side, as withDirect Sequence Spread Spectrum technology, it has the inherent security fea-ture of scrambling. On the software side, WLAN offers the encryption function(WEP) to enhance security and access control.Can Instant Wireless products support printer sharing?Instant Wireless products perform the same function as LAN products.Therefore, Instant Wireless products can work with NetWare, WindowsNT/2000, or other network operating systems to support printer or file sharing.What is WEP?WEP is Wired Equivalent Privacy, a data privacy mechanism based on a 40/64bit shared key algorithm, as described in the IEEE 802.11 standard. 802.11a standard states a maximum data transfer rate of 54Mbps and an oper-ating frequency of 5GHz.What is the IEEE 802.11b standard?It is one of the IEEE standards for wireless networks. The 802.11b standardallows wireless networking hardware from different manufacturers to commu-nicate, provided that the hardware complies with the 802.11b standard. The802.11b standard states a maximum data transfer rate of 11Mbps and an oper-ating frequency of 2.4GHz.What IEEE 802.11a features are supported?The product supports the following IEEE 802.11a functions: • OFDM protocol • Multi-Channel Roaming • Automatic Rate Selection • RTS/CTS feature • Fragmentation What IEEE 802.11b features are supported?The product supports the following IEEE 802.11b functions: • CSMA/CA plus Acknowledge protocol • Multi-Channel Roaming • Automatic Rate Selection • RTS/CTS feature • Fragmentation • Power Management What is ad-hoc mode?When a wireless network is set to ad-hoc mode, the wireless-equipped com-puters are configured to communicate directly with each other. The ad-hocwireless network will not communicate with any wired network. What is infrastructure mode?When a wireless network is set to infrastructure mode, the wireless network isconfigured to communicate with a wired network through a wireless accesspoint.What is ISM band?The FCC and their counterparts outside of the U.S. have set aside bandwidthfor unlicensed use in the ISM (Industrial, Scientific and Medical) band.Spectrum in the vicinity of 2.4 GHz, in particular, is being made availableworldwide. This presents a truly revolutionary opportunity to place convenienthigh-speed wireless capabilities in the hands of users around the globe.
Dual-Band Wireless A+G PCI Adapter33Instant Wireless®Series32on startup. These instructions search for the operating system, load it and passcontrol to it. CTS (Clear To Send) - An RS-232 signal sent from the receiving station to thetransmitting station that indicates it is ready to accept data.Default Gateway - The router used to forward all traffic that is not addressedto a station within the local subnet.DHCP (Dynamic Host Configuration Protocol) - A protocol that lets networkadministrators manage centrally and automate the assignment of InternetProtocol (IP) addresses in an organization’s network. Using the Internet’s set ofprotocol (TCP/IP), each machine that can connect to the Internet needs aunique IP address. When an organization sets up its computer users with a con-nection to the Internet, an IP address must be assigned to each machine.Without DHCP, the IP address must be entered manually at each computer and,if computers move to another location in another part of the network, a new IPaddress must be entered. DHCP lets a network administrator supervise and dis-tribute IP addresses from a central point and automatically sends a new IPaddress when a computer is plugged into a different place in the network. DHCP uses the concept of a “lease” or amount of time that a given IP addresswill be valid for a computer. The lease time can vary depending on how long auser is likely to require the Internet connection at a particular location. It’s espe-cially useful in education and other environments where users change fre-quently. Using very short leases, DHCP can dynamically reconfigure networksin which there are more computers than there are available IP addresses. DHCP supports static addresses for computers containing Web servers thatneed a permanent IP address. DNS - The domain name system (DNS) is the way that Internet domain nameare located and translated into Internet Protocol (IP) addresses. A domain nameis a meaningful and easy-to-remember “handle” for an Internet address. Driver - A workstation or server software module that provides an interfacebetween a network interface card and the upper-layer protocol software runningin the computer; it is designed for a specific NIC, and is installed during theinitial installation of a network-compatible client or server operating system.DSSS (Direct-Sequence  Spread Spectrum) - DSSS generates a redundant bitpattern for all transmitted data. This bit pattern is called a chip (or chippingAppendix B: Glossary802.11a - One of the IEEE standards for wireless networking hardware.Products that adhere to a specific IEEE standard will work with each other,even if they are manufactured by different companies. It specifies a maximumdata transfer rate of 54Mbps and an operating frequency of 5GHz. The 802.11astandard uses the Orthogonal Frequency Division Multiplexing (OFDM) trans-mission method. Additionally, the 802.11a standard supports 802.11 featuressuch as WEP encryption for security.802.11b - One of the IEEE standards for wireless networking hardware.Products that adhere to a specific IEEE standard will work with each other,even if they are manufactured by different companies. The 802.11b standardspecifies a maximum data transfer rate of 11Mbps, an operating frequency of2.4GHz, and WEP encryption for security. 802.11b networks are also referredto as Wi-Fi networks.802.11g - A proposed, but as yet unratified extension of the IEEE 802.11 stan-dard for wireless networking hardware. The draft 802.11g specifications usedby Linksys specify a maximum data transfer rate of 54Mbps using OFDMmodulation, an operating frequency of 2.4GHz, backward compatibility withIEEE 802.11b devices, and WEP encryption for security.Adapter - Printed circuit board that plugs into a PC to add to capabilities orconnectivity to a PC. In a networked environment, a network interface card(NIC) is the typical adapter that allows the PC or server to connect to theintranet and/or Internet.Ad-hoc Network - An ad-hoc network is a group of computers, each with awireless adapter, connected as an independent 802.11 wireless LAN.  Ad-hocwireless computers operate on a peer-to-peer basis, communicating directlywith each other without the use of an access point.  Ad-hoc mode is alsoreferred to as an Independent Basic Service Set (IBSS) or as peer-to-peermode, and is useful at a departmental scale or SOHO operation.Bit - A binary digit. The value - 0 or 1-used in the binary numbering system.Also, the smallest form of data.Boot - To cause the computer to start executing instructions. Personal comput-ers contain built-in instructions in a ROM chip that are automatically executed
Dual-Band Wireless A+G PCI Adapter35Instant Wireless®Series34The IEEE fosters the development of standards that often become national andinternational standards. The organization publishes a number of journals, hasmany local chapters, and several large societies in special areas, such as theIEEE Computer Society. Infrastructure Network - An infrastructure network is a group of computersor other devices, each with a wireless adapter, connected as an 802.11 wirelessLAN. In infrastructure mode, the wireless devices communicate with eachother and to a wired network by first going through an access point. An infra-structure wireless network connected to a wired network is referred to as aBasic Service Set (BSS). A set of two or more BSS in a single network isreferred to as an Extended Service Set (ESS). Infrastructure mode is useful ata corporation scale, or when it is necessary to connect the wired and wirelessnetworks.IP (Internet Protocol) - The method or protocol by which data is sent from onecomputer to another on the Internet. It is a standard set of rules, procedures, orconventions relating to the format and timing of data transmission between twocomputers that they must accept and use to be able to understand each other.IP Address - In the most widely installed level of the Internet Protocol (IP)today, an IP address is a 32-binary digit number that identifies each sender orreceiver of information that is sent in packet across the Internet. When yourequest an HTML page or send e-mail, the Internet Protocol part of TCP/IPincludes your IP address in the message (actually, in each of the packets if morethan one is required) and sends it to the IP address that is obtained by lookingup the domain name in the Uniform Resource Locator you requested or in thee-mail address you're sending a note to. At the other end, the recipient can seethe IP address of the Web page requester or the e-mail sender and can respondby sending another message using the IP address it received. IPCONFIG - A utility that provides for querying, defining and managing IPaddresses within a network.  A commonly used utility, under Windows NT and2000, for configuring networks with static IP addresses.ISP - An ISP (Internet service provider) is a company that provides individualsand companies access to the Internet and other related services such as Web sitebuilding and virtual hosting. LAN - A local area network (LAN) is a group of computers and associateddevices that share a common communications line and typically share thecode).  Even if one or more bits in the chip are damaged during transmission,statistical techniques embedded in the receiver can recover the original datawithout the need for retransmission. To an unintended receiver, DSSS appearsas low power wideband noise and is rejected (ignored) by most narrowbandreceivers.  However, to an intended receiver (i.e., another wireless LAN end-point), the DSSS signal is recognized as the only valid signal, and interferenceis inherently rejected (ignored).Dynamic IP Address - An IP address that is automatically assigned to a clientstation in a TCP/IP network, typically by a DHCP server. Network devices thatserve multiple users, such as servers and printers, are usually assigned static IPaddresses. Encryption - A security method that applies a specific algorithm to data inorder to alter the data's appearance and prevent other devices from reading theinformation. FHSS (Frequency Hopping Spread Spectrum) - FHSS continuously changes(hops) the carrier frequency of a conventional carrier several times per secondaccording to a pseudo-random set of channels. Because a fixed frequency is notused, and only the transmitter and receiver know the hop patterns, interceptionof FHSS is extremely difficult.Firmware - Code that is written onto read-only memory (ROM) or program-mable read-only memory (PROM).  Once firmware has been written onto theROM or PROM, it is retained even when the device is turned off.Gateway - A device that interconnects networks with different, incompatiblecommunications protocols. Hardware - Hardware is the physical aspect of computers, telecommunica-tions, and other information technology devices. The term arose as a way to dis-tinguish the “box” and the electronic circuitry and components of a computerfrom the program you put in it to make it do things. The program came to beknown as the software.IEEE - The Institute of Electrical and Electronics Engineers. The IEEEdescribes itself as “the world’s largest technical professional society—promot-ing the development and application of electrotechnology and allied sciencesfor the benefit of humanity, the advancement of the profession, and the well-being of our members.”
Dual-Band Wireless A+G PCI Adapter37Instant Wireless®Series36PCI (Peripheral Component Interconnect) - A peripheral bus commonly usedin PCs, Macintoshes and workstations. It was designed primarily by Intel andfirst appeared on PCs in late 1993. PCI provides a high-speed data pathbetween the CPU and peripheral devices (video, disk, network, etc.). There aretypically three or four PCI slots on the motherboard. In a Pentium PC, there isgenerally a mix of PCI and ISA slots or PCI and EISA slots. Early on, the PCIbus was known as a “local bus.”PCI provides “plug and play” capability, automatically configuring the PCIcards at startup. When PCI is used with the ISA bus, the only thing that is gen-erally required is to indicate in the CMOS memory which IRQs are already inuse by ISA cards. PCI takes care of the rest.PCI allows IRQs to be shared, which helps to solve the problem of limited IRQsavailable on a PC. For example, if there were only one IRQ left over after ISAdevices were given their required IRQs, all PCI devices could share it. In a PCI-only machine, there cannot be insufficient IRQs, as all can be shared.Plug-and-Play - The ability of a computer system to configure expansionboards and other devices automatically without requiring the user to turn offthe system during installation.Roaming - In an infrastructure mode wireless network, this refers to the abili-ty to move out of one access point's range and into another and transparentlyreassociate and reauthenticate to the new access point.  This reassociation andreauthentication should occur without user intervention and ideally withoutinterruption to network connectivity.  A typical scenario would be a locationwith multiple access points, where users can physically relocate from one areato another and easily maintain connectivity.Spread Spectrum - Spread Spectrum technology is a wideband radio frequen-cy technique developed by the military for use in reliable, secure, mission-crit-ical communications systems. It is designed to trade off bandwidth efficiencyfor reliability, integrity, and security. In other words, more bandwidth is con-sumed than in the case of narrowband transmission, but the trade off producesa signal that is, in effect, louder and thus easier to detect, provided that thereceiver knows the parameters of the spread-spectrum signal being broadcast.If a receiver is not tuned to the right frequency, a spread-spectrum signal lookslike background noise. There are two main alternatives, Direct SequenceSpread Spectrum (DSSS) and Frequency Hopping Spread Spectrum (FHSS).resources of a single processor or server within a small geographic area (forexample, within an office building). MAC Address - The MAC (Media Access Control) address is your computer’sunique hardware number. Mbps (Megabits per second) - One million bits per second; unit of measure-ment for data transmission.mIRC - mIRC runs under Windows and provides a graphical interface for log-ging onto IRC servers and listing, joining and leaving channels.Motherboard - A motherboard is the physical arrangement in a computer thatcontains the computer's basic circuitry and components. Network - A system that transmits any combination of voice, video and/or databetween users. Network Mask - also known as the “Subnet Mask.”NIC (Network Interface Card) - A board installed in a computer system, usu-ally a PC, to provide network communication capabilities to and from that com-puter system. Also called an adapter.OFDM - Developed for wireless applications, Orthogonal Frequency DivisionMultiplexing (OFDM) technology offers superior performance-increased datarates and more reliable transmissions-than previous technologies, such asDSSS. OFDM is a scheme in which numerous signals of different frequenciesare combined to form a single signal for transmission on the medium. OFDM works by breaking one high-speed data stream into a number of lower-speed data streams, which are then transmitted in parallel. Each lower speedstream is used to modulate a subcarrier. Essentially, this creates a multi-carriertransmission by dividing a wide frequency band or channel into a number ofnarrower frequency bands or sub-channels. OFDM is also used for other appli-cations, including powerline networking.Passphrase - Used much like a password, a passphrase simplifies the WEPencryption process by automatically generating the WEP encryption keys forLinksys products.
Dual-Band Wireless A+G PCI AdapterWEP (Wired Equivalent Privacy) - A data privacy mechanism based on a 64-bit shared key algorithm, as described in the IEEE 802.11b standard. WINIPCFG - Configuration utility based on the Win32 API for querying,defining and managing IP addresses within a network.  A commonly used util-ity under Windows 95, 98, and Me.WLAN (Wireless Local Area Network) - A group of computers and associat-ed devices that communicate with each other wirelessly.39Instant Wireless®Series38SSID (Service Set IDentifier) - A unique name shared among all points in awireless network. The SSID must be identical for each point in the wireless net-work and is case-sensitive. Static IP Address - A permanent IP address that is assigned to a node in aTCP/IP network. Subnet Mask - The method used for splitting IP networks into a series of sub-groups, or subnets. The mask is a binary pattern that is matched up with the IPaddress to turn part of the host ID address field into a field for subnets. TCP (Transmission Control Protocol) - A method (protocol) used along withthe IP (Internet Protocol) to send data in the form of message units (datagram)between network devices over a LAN or WAN. While IP takes care of handlingthe actual delivery of the data (routing), TCP takes care of keeping track of theindividual units of data (called packets) that a message is divided into for effi-cient delivery over the network. TCP is known as a “connection oriented” pro-tocol due to requiring the receiver of a packet to return an acknowledgment ofreceipt to the sender of the packet resulting in transmission control.TCP/IP (Transmission Control Protocol/Internet Protocol) - The basic com-munication language or set of protocols for communications over a network(developed specifically for the Internet).  TCP/IP defines a suite or group ofprotocols and not only TCP and IP.Topology - A network's topology is a logical characterization of how thedevices on the network are connected and the distances between them. Themost common network devices include hubs, switches, routers, and gateways.Most large networks contain several levels of interconnection, the most impor-tant of which include edge connections, backbone connections, and wide-areaconnections.UDP (User Datagram Protocol) - A method (protocol) used along with the IP(Internet Protocol) to send data in the form of message units (datagram)between network devices over a LAN or WAN. While IP takes care of handlingthe actual delivery of the data (routing), UDP takes care of keeping track of theindividual units of data (called packets) that a message is divided into for effi-cient delivery over the network. UDP is known as a “connection-less” protocoldue to NOT requiring the receiver of a packet to return an acknowledgment ofreceipt to the sender of the packet (as opposed to TCP).
Dual-Band Wireless A+G PCI AdapterDimensions 5.79" x 0.79" x 4.72"(147 mm x 20 mm x 120 mm)Unit Weight 3.6 oz. (0.1 kg)Certifications FCC, CE, IC-03Operating Temp 32° F to 131° F (0° C to 55° C)Storage Temp -4° F to 185° F (-20° C to 85° C)Operating Humidity 10% to 85%, Non-CondensingStorage Humidity 5% to 90%, Non-Condensing41Instant Wireless®Series40EnvironmentalAppendix C: SpecificationsStandards IEEE 802.11a, 802.11b, draft 802.11gInterface PCILEDs LINK, PWRTransmit Power802.11a and draft 802.11g:OFDM802.11b:CCK,DQPSK,DBPSKSecurity Feature WEPWEP Key Bits 64, 128, 152 BitsProtocols TCP/IP2.4GHz band : 19.0dBm5.15 - 5.25GHz : 17.0dBm5.25 - 5.35GHz : 16.0dBm5.725 - 5.825GHz : 15.0dBmModulation
Dual-Band Wireless A+G PCI Adapter43Instant Wireless®Series42Appendix E: Contact InformationFor help with the installation or operation of the Dual-Band Wireless A+G PCIAdapter, contact Linksys Technical Support at one of the phone numbers orInternet addresses below.Sales Information 800-546-5797 (LINKSYS)Technical Support 800-326-7114RMA (Return MerchandiseAuthorization) Issues www.linksys.com (or call 949-271-5461)Fax 949-265-6655E-mail support@linksys.comWeb http://www.linksys.comFTP Site ftp.linksys.comAppendix D: Warranty InformationBE SURE TO HAVE YOUR PROOF OF PURCHASE AND A BARCODEFROM THE PRODUCT’S PACKAGING ON HAND WHEN CALLING.RETURN REQUESTS CANNOT BE PROCESSED WITHOUT PROOF OFPURCHASE. IN NO EVENT SHALL LINKSYS’ LIABILITY EXCEED THE PRICE PAIDFOR THE PRODUCT FROM DIRECT, INDIRECT, SPECIAL, INCIDEN-TAL, OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USEOF THE PRODUCT, ITS ACCOMPANYING SOFTWARE, OR ITS DOCU-MENTATION. LINKSYS DOES NOT OFFER REFUNDS FOR ANY PROD-UCT. LINKSYS OFFERS CROSS SHIPMENTS, A FASTER PROCESS FOR PRO-CESSING AND RECEIVING YOUR REPLACEMENT.  LINKSYS PAYSFOR UPS GROUND ONLY. ALL CUSTOMERS LOCATED OUTSIDE OFTHE UNITED STATES OF AMERICA AND CANADA SHALL BE HELDRESPONSIBLE FOR SHIPPING AND HANDLING CHARGES. PLEASECALL LINKSYS FOR MORE DETAILS.
© Copyright 2003 Linksys,All Rights Reserved.http://www.linksys.com

Navigation menu