Cisco Linksys WPC54A Wireless Network PC Card User Manual Part 3

Cisco-Linksys, LLC Wireless Network PC Card Part 3

Part 3

Download: Cisco Linksys WPC54A Wireless Network PC Card User Manual Part 3
Mirror Download [FCC.gov]Cisco Linksys WPC54A Wireless Network PC Card User Manual Part 3
Document ID259605
Application IDcMFR3DzOQubDyDxDe/HHxA==
Document DescriptionPart 3
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize86.34kB (1079259 bits)
Date Submitted2002-07-29 00:00:00
Date Available2002-07-29 00:00:00
Creation Date2002-03-22 10:51:26
Producing SoftwareAcrobat Distiller 4.0 for Windows
Document Lastmod2002-03-22 10:51:40
Document TitlePart 3

9. A list of available device drivers displays on the screen. Choose "802.11a Wireless LAN
Network Adapter," and click Next to continue.
10. The 802.11a NDIS evaluation driver currently does not have a digital signature from Microsoft.
Therefore, Windows 2000 shows a warning message. Click Yes to proceed with driver
installation.
26
11. Click Finish.
12. The "802.11a Wireless LAN Network Adapter" now displays under "Network Adapters" in the
Device Manager. Proceed to Section 2.5 for device configuration information.
27
13. To revert back to the DK driver, follow the instructions given in the Diagnostic Kernel (DK):
Script Programming Interface document.
2.4 Driver Uninsfallafion
This section provides information about uninstallation procedures required for upgrading the NDIS
driver from previous 802.11a software releases. If the system does not have previously installed
versions of the NDIS driver and you wish to remove the newly installed driver from the system,
proceed to Step 4.
The NDIS driver since Release 1.0 no longer leverages the Transport Driver Interface (TDI)
protocol to provide the LinkMon programming interface, the TDI protocol should be uninstalled.
Follow these steps to uninstall the TDI protocol:
1. Go to "Network and Dial-up Connections" in the Control Panel.
2. Right-click the 802.11a Wireless LAN Network Adapter "Local Area Connection" icon and
choose Properties.
28
3. Choose "802.11a NIC Access TDI" and click Uninstall.
4. Click Yes to confirm the uninstallation of the TDI interface.
5. To remove the NDIS driver from the OS, go to Device Manager, right-click "802.11a Wireless
LAN Network Adapter #4," and choose Uninstall.
29
6. Click OK to uninstall the device.
30
7. When the device is uninstalled from Device Manager, search for and delete the driver files that
reside in the system. To do so, go to the Start menu and choose "Search For Files or
Folders...," enter "oem*.inf" in the "Search for files or folders named:" field, and enter
"802.11a" in the "Containing text:" field. Click Search Now, two files matching these criteria are
displayed. Choose the files that have been found and delete them from the system.
8. To complete the uninstallation, two driver binary files, "ar52l0b.sys" and "athtdint.sys", should
also be removed from the "\WINNT\system32\drivers" folder.
31
9. If there is a file named "athnic.ini" in the "\WINNT\system32\drivers" folder, delete it.
32
2.5 Device Configuration
Configuration of the 802.11a Wireless LAN Network Adapter can be done through the Network
Control Panel (NCP) in adapter properties. You can set the Wireless Network Adapter to work in
one of two modes, either infrastructure mode (Which leverages an AP) or ad hoc mode (which
consists of a group of stations participating in the WLAN).
In infrastructure mode, the Wireless LAN Network Adapter participates in a basic service set (BSS)
as a station, and communicates with the other stations through an AP, as illustrated in Figure 1.
In ad hoc mode, a Wireless LAN Network Adapter works within an independent basic service set
(IBSS), as illustrated in Figure 2. All stations communicate directly with other stations without an
AP.
33
To configure the 802.11a Wireless LAN Network Adapter:
1. In the Device Manager, right-click "802.11a Wireless LAN Network Adapter," and click
Properties to access the properties of the adapter.
34
2. Configuration additions, modifications, and deletions are made under the "Settings"
tab of the "802.11a Wireless LAN Network Adapter" properties. Select one of the
configurations under the configuration list, and click Modify to show the "Network
Configuration Settings" screen. This property sheet has two pages: General and
Security. The General page has the following fields:
Configuration Name: This field identifies the configuration. This name must be unique.
Configuration names are case insensitive.
Network Name (SSID): This is the name of the IEEE 802.11a Wireless LAN Network,
for example, "802.11 Wireless LAN Network." This field has a maximum limit of 32
characters.
Network Connection: This field defines whether the STA is configured for an ad hoc or
infrastructure network.
Power Saving: This field allows the configuration of power management options. The
options are Off, Normal and Maximum. Power management is disabled when ad hoc
mode is selected in the Network Connection field. When the Power saving setting is Off,
the adapter receives full power from the PC. When the Power Saving setting is Normal,
the driver turns off power to the adapter for brief periods over briefly-spaced time
intervals. When the Power Saving setting is Maximum, the driver turns off power to the
adapter for longer periods over more widely-spaced time intervals.
Turbo Mode: This field enables or disables 802.11a turbo mode.
Locally Administered Address: This field defines the locally administered MAC address
(LAA). To enter a value in the address field, the check box needs to be selected.
Typically, an LAA is not required, because as the driver automatically loads a unique,
globally administered address from the EEPROM.
35

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Encryption                      : Standard V1.2 (40-bit)
User Access                     : Print, Copy, Fill forms, Extract, Assemble, Print high-res
Modify Date                     : 2002:03:22 10:51:40+08:00
Create Date                     : 2002:03:22 10:51:26+08:00
Producer                        : Acrobat Distiller 4.0 for Windows
Page Count                      : 10
EXIF Metadata provided by EXIF.tools
FCC ID Filing: PKW-WPC54A

Navigation menu