Cisco Linksys WRT55AG Dual-Band Wireless A+G Broadband Router User Manual

Cisco-Linksys, LLC Dual-Band Wireless A+G Broadband Router WRT55AG ug Rev NC

a href="https://usermanual.wiki/Cisco-Linksys" itemprop="url"> Cisco Linksys >

User Manual part 5

InternetConfiguration Type The type of Internet connection is displayed here.Status For PPPoE or PPTP, the status of the Internet connection is displayedhere. If there is no connection, you can click the Connect button to re-estab-lish it. If there is a connection, you can click the Disconnect button to end it.IP Address, Subnet Mask, and Default Gateway The Router’s IP Address,Subnet Mask, and Default Gateway Address, as seen by external users on theInternet, are displayed here.DNS The DNS (Domain Name System) IP Addresses currently used by theRouter are shown here. Multiple DNS IP settings are common. In most cases,the first available DNS entry is used.To refresh the Status screen, click the Refresh button. To get more informationabout the features, click the Help button.The Help screen, shown in Figure 7-19, offers links to all of the Router’s tech-nical support resources and the application that upgrades the Router’sfirmware. For additional information about each screen of the web-based util-ity, click the appropriate link on the lefthand side of the Help screen.55Instant Wireless®Series54Dual-Band Wireless A+G Broadband Router Firmware Version The version number of the firmware currently installed isdisplayed here.Current Time The current time, as set from the Setup tab, is displayed here.Host Name The Host Name is the name of the Router. This entry is necessaryfor some ISPs.Domain Name The Domain Name is the name of the Router's domain. Thisentry is necessary for some ISPs.LANIP Address and Subnet Mask The current IP Address and Subnet Mask ofthe Router, as seen by users on your local area network (LAN), are displayedhere. DHCP Server The status of the Router's DHCP server function is displayedhere.Wireless 5GHz, 802.11aMode The Mode setting, as set from the Setup tab, is displayed here.SSID The SSID of the 5GHz, 802.11a network is displayed here.Channel The channel for the 5GHz, 802.11a wireless network is displayedhere.Encryption Function The status of the WEP encryption is displayed here.Wireless 2.4GHz, Wireless-GMode The Mode setting, as set from the Setup tab, is displayed here.SSID The SSID of the 2.4GHz, 802.11b network is displayed here.Channel The channel for the 2.4GHz, 802.11b wireless network is displayedhere.Encryption Function The status of the WEP encryption is displayed here.HelpFigure 7-19
Dual-Band Wireless A+G Broadband Router Wireless MAC FiltersWireless access can be filtered by using the MAC addresses of the wirelessdevices transmitting within your network’s radius. Select Enable from the drop-down menu and choose if you wish to Prevent wireless access by MAC addressor Permit by MAC Address. Then, click the Edit MAC Filter List button toaccess a secondary screen, where you can enter the MAC Addresses of thedevices you wish to filter.5GHz, 802.11aAuthentication Type The default is set to Auto, which allows either OpenSystem or Shared Key authentication to be used. For Open System authentica-tion, the sender and the recipient do NOT use a WEP key for authentication.For Shared Key authentication, the sender and recipient use a WEP key forauthentication. If you want to use only Shared Key authentication, then selectShared Key. 57Figure 7-20Linksys Website Clicking this link will take you to Linksys’s website,www.linksys.com, provided you are connected to the Internet. Online User Guide in PDF Format and Adobe Website Clicking the OnlineUser Guide in PDF format link opens the Router’s User Guide. The UserGuide is in Adobe Acrobat Portable Document File (.pdf) format, so you needthe Adobe Acrobat Reader to view it. If you do not have the Acrobat Reader,click the Adobe website link to download it.The following instructions are for advanced users or users whose setup needsrequire special configuration. When you click the Advanced tab, you will beable to set up these features. There are six additional tabs available. Advanced Wireless - Allows you to customize data transmission and 802.1xsettings for your wireless network(s).Internet Filter - Enables you to set up filters that block specific internal usersfrom Internet access.Port Forwarding - Lets you set up public services on your network, such as anftp server, mail server, or web server.Routing - Enables you to configure the routing mode of the Router.DDNS - Allows you to enable the Dynamic Domain Name System (DDNS)feature, so a fixed domain name can be assigned to a dynamic Internet IPaddress.If you need to access the basic configuration tabs, click the Setup tab. The Advanced Wireless screen, shown in Figure 7-20, allows you to customizedata transmission settings. In most cases, the advanced wireless settings on thisscreen should remain at their default values.56Instant Wireless®SeriesAdvanced TabsAdvanced Wireless
Download:
Mirror Download [FCC.gov]
Document ID310131
Application IDszStT7R78nYbM4eFgcey2A==
Document DescriptionUser Manual part 5
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize243.19kB (3039857 bits)
Date Submitted2003-03-14 00:00:00
Date Available2003-03-13 00:00:00
Creation Date2003-03-14 17:47:02
Producing SoftwareAcrobat Distiller 5.0.5 (Windows)
Document Lastmod2003-03-14 17:47:16
Document TitleWRT55AG-ug-Rev_NC.qxd
Document CreatorPScript5.dll Version 5.2
Document Author: kenl
FCC ID Filing: PKW-WRT55AG

Navigation menu