Cisco Linksys WRT55AG Dual-Band Wireless A+G Broadband Router User Manual

Cisco-Linksys, LLC Dual-Band Wireless A+G Broadband Router WRT55AG ug Rev NC

a href="https://usermanual.wiki/Cisco-Linksys" itemprop="url"> Cisco Linksys >

User manual part 3

Dual-Band Wireless A+G Broadband Router 7b. When connecting to the Internet through a DHCP connection:If you have a cable connection, you will see a screen similar to that shownin Figure 5-14. If you have a DSL connection, you will see a screen similarto that shown in Figure 5-15. Enter the information just as you do whenlogging onto your Internet connection, and click the Next button. Then,continue to step 6.7c. When connecting to the Internet through a PPPoE connection:PPPoE connections are only available with DSL Internet connections. Ifthis is how you connect to the Interent, you will see a screen similar to thatshown in Figure 5-16. Enter the information just as you do when loggingonto your Internet connection, and click the Next button. Then, continue tostep 6.25Instant Wireless®SeriesIf you are using Windows 2000,the instructions will start asshown in Figure 5-10.If you are using Windows XP, theinstructions will start as shown inFigure 5-11. If you are usingWindows XP in “Classic” mode,you can see these instructions inthis mode by clicking the Classicbutton.After configuring your PC, as shown in the first part of 5a, you will see aStatic IP Setup screen. If you have a cable connection, you will see a screensimilar to that shown in Figure 5-12. If you have a DSL connection, youwill see a screen similar to that shown in Figure 5-13. Enter the informa-tion just as you do when logging onto your Internet connection, and clickthe Next button. Then, continue to step 6.24Figure 5-12 Figure 5-13Figure 5-14 Figure 5-15Figure 5-16Figure 5-10Figure 5-11
Dual-Band Wireless A+G Broadband Router 9. As shown in Figure 5-18, the Basic Settings screen for your 5 GHz/802.11awireless products will appear. Enter your wireless network’s SSID andselect the channel at which the network broadcasts its wireless signal. Then,click the Next button to continue.SSID. The SSID is the unique name shared among all points in a wirelessnetwork. The SSID must be identical for all points in the wireless network.It is case sensitive and must not exceed 32 characters, which may be anykeyboard character. The default SSID, linksys-a, should be changed forgreater security. Make sure this setting is the same for all points in yourwireless network.Channel. Selectthe appropriatechannel fromthe list providedto correspondwith your net-work settings,between 36 and64. All points inyour wirelessnetwork mustuse the samechannel in orderto function cor-rectly.10. At this point, the configura-tion performed with theSetup Wizard is complete, asshown in Figure 5-19. Youcan register the Routeronline by clicking theRegister Online button. Toconfigure any other AccessPoints in your network, youcan run this Setup Wizardagain. Click the Exit buttonto exit the Setup Wizard.27Instant Wireless®Series8. As shown in Figure 5-17, the Basic Settings screen for your 2.4GHz/54g(802.11g-draft) wireless products will appear. Enter the Network Mode,SSID, and the channel at which the network broadcasts its wireless signal.Then, click the Next button to continue.Network Mode. Since Wireless-G products are backwards compatible with802.11b products, this mode is provided in the event you wish to incorpo-rate 802.11b products into you Wireless-G wireless network. If you areusing both Wireless-G and 802.11b products in your network, select Mixedmode. You may experience reduced networking speeds in Mixed mode, asthe speed must compensate for both types. If you are only using Wireless-G products in your network, select G-Only mode.SSID. The SSID is the unique name shared among all points in a wirelessnetwork. The SSID must be identical for all points in the wireless network.It is case sensitive and must not exceed 32 characters, which may be anykeyboard character. The default SSID, linksys-g, should be changed forgreater security. Make sure this setting is the same for all points in yourwireless network.Channel. Select the appropriate channel from the list provided to corre-spond with your network settings, between 1 and 11 (in North America). Allpoints in your wireless network must use the same channel in order to func-tion correctly.26Figure 5-18Figure 5-17 Figure 5-19
Download:
Mirror Download [FCC.gov]
Document ID310129
Application IDszStT7R78nYbM4eFgcey2A==
Document DescriptionUser manual part 3
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize310.6kB (3882534 bits)
Date Submitted2003-03-14 00:00:00
Date Available2003-03-13 00:00:00
Creation Date2003-03-14 17:45:51
Producing SoftwareAcrobat Distiller 5.0.5 (Windows)
Document Lastmod2003-03-14 17:46:02
Document TitleWRT55AG-ug-Rev_NC.qxd
Document CreatorPScript5.dll Version 5.2
Document Author: kenl
FCC ID Filing: PKW-WRT55AG

Navigation menu