Cisco Systems 2305-MDM06-C2 Broadband Data Modem User Manual Ripwave Modem User Guide

Cisco Systems, Inc Broadband Data Modem Ripwave Modem User Guide

User manual

RRiippwwaavvee™™--MMXX MMooddeemm UUsseerr GGuuiiddee For use with all Ripwave-MX Modem models Part Number 40-00382-00 Revision B, Version 1.0, PV1.5 November 23, 2005 Proprietary All information disclosed by this document is the proprietary property of Navini Networks, Inc. and is protected by copyright, trademark, and/or trade secret laws. All rights therein are expressly reserved.
Navini Networks, Inc. Ripwave-MX Modem User Guide TABLE OF CONTENTS PERMISSIONS, TRADEMARKS & DISTRIBUTION.............................................................................3 SAFETY .......................................................................................................................................................4 REGULATORY INFORMATION ..............................................................................................................6 INTRODUCTION.......................................................................................................................................7 PACKAGE INVENTORY.........................................................................................................................7 LMX MODELS...........................................................................................................................................7 OPERATING FREQUENCIES .........................................................................................................................8 MINIMUM COMPUTING REQUIREMENTS......................................................................................8 PHYSICAL CHARACTERISTICS..........................................................................................................9 INSTALLING THE LMX MODEM ......................................................................................................10 ACCESSING THE INTERNET..............................................................................................................12 TROUBLESHOOTING...........................................................................................................................12 LCD DISPLAY..........................................................................................................................................12 INSTALLING NAVINI DIAGNOSTICS (NAVDIAG)........................................................................14 TROUBLESHOOTING USING NAVINI DIAGNOSTICS (NAVDIAG)..........................................17 UNINSTALLING NAVINI DIAGNOSTICS (NAVDIAG) ..................................................................23 OPTIONAL BATTERIES .......................................................................................................................24 OPTIONAL EXTERNAL BATTERY PACKS...................................................................................................24 CONNECTING THE STANDARD EXTERNAL BATTERY PACK (S-EBP)........................................................25 THE INDICATOR LIGHT ON THE STANDARD EXTERNAL BATTERY PACK (S-EBP)....................................26 CHARGING THE STANDARD EXTERNAL BATTERY PACK (S-EBP)............................................................26 CONNECTING AND DISCONNECTING THE HEAVY DUTY EXTERNAL BATTERY PACK (HD-EBP).............27 THE INDICATOR LIGHT ON THE HEAVY DUTY EXTERNAL BATTERY PACK (HD-EBP) ............................28 CHARGING THE HEAVY DUTY EXTERNAL BATTERY PACK (HD-EBP) ....................................................29 CARE & MAINTENANCE .....................................................................................................................29 UPGRADING THE MODEM .................................................................................................................30 ADDENDUM 1: RIPWAVE™-MX MODEM - PC TROUBLESHOOTING....................................32 ADDENDUM 2: END USER SOFTWARE LICENSE AGREEMENT.............................................37 2 051123_pv1.5_Ripwave-MX Modem User Guide_40-00382-00b(prelim4.4.2)
Navini Networks, Inc. Ripwave-MX Modem User Guide Permissions, Trademarks & Distribution Namaco Copyright© 2001 - 2005, Navini Networks, Inc. All information contained herein and disclosed by this document is confidential and the proprietary property of Navini Networks, Inc. and all rights therein are expressly reserved. Acceptance of this material signifies agreement by the recipient that the information contained in this document is confidential and that it will be used solely for the purposes set forth herein. Acceptance of this material signifies agreement by the recipient that it will not be used, reproduced in whole or in part, disclosed, distributed, or conveyed to others in any manner or by any means – graphic, electronic, or mechanical, including photocopying, recording, taping, or information storage and retrieval systems – without the express written permission of Navini Networks, Inc. vini Networks is a registered trademark. The Navini Networks logo, Zero-Install, Ripwave, and Unwired by Navini are trademarks of Navini Networks, Inc. Other product and company names mentioned herein may be trademarks and/or service marks of their respective owners. Except for the hardware warranty, nothing herein constitutes any representation, warranty, assurance, or guaranty of any kind. Because of continuing developments and improvements in design, manufacturing, and deployment, terial in this document is subject to change without notification and does not represent any mmitment or obligation on the part of Navini Networks, Inc. Navini Networks, Inc. shall have no liability for any error or damages resulting from the use of this document. All Navini Networks logos and trademarks are the property of Navini Networks, Inc. Unauthorized usage is strictly prohibited without the express written permission of Navini Networks, Inc. © 2001 - 2005 Navini Networks, Inc. All rights reserved. 3 051123_pv1.5_Ripwave-MX Modem User Guide_40-00382-00b(prelim4.4.2)
Navini Networks, Inc. Ripwave-MX Modem User Guide Safety To optimize safety and expedite installation and service, read this document thoroughly. Follow all warnings, cautions, and instructions marked on the equipment and included in this document. To aid in the prevention of injury and damage to property, cautionary symbols have been placed in this document to alert the reader to known potentially hazardous situations, or hazards to equipment or procedures. The symbols are placed before the information to which they apply. However, any situation that involves heavy equipment and electricity can become hazardous, and caution and safety should be practiced at all times when installing, servicing, or operating the equipment. Caution Symbol - possible equipment or property damage Warning Symbol - could cause personal injury or otherwise be hazardous to your health and/or property. . Follow all warnings and instructions that come with the equipment. . Do not use the equipment while you are in a bathtub, shower, pool, or spa. Exposure of the equipment to water could cause severe electrical shock or serious damage to the equipment. . Do not allow any type of liquid to come in contact with the equipment. Unplug the equipment from the power source before cleaning. Use a damp cloth for cleaning. Do not use any soaps or liquid cleaners. equipment on or near aircraft. . Only operate the equipment from the type of power source(s) indicated in this manual (110/220 VAC, 60/50 Hz or Navini supplied battery). Any other type of input power source may cause damage to the equipment. . Power the equipment using only the battery or the AC adapter cable provided, and in accordance with the instructions specified in the User Guide. . Do not use a frayed or damaged power cord. Do not place the power cord where it can be stepped on or tripped over. 8. Do not touch wires where the insulation is frayed or worn unless the equipment has been disconnected from its power source. 9. Do not overload wall outlets, power strips, or extension cords. This can cause serious electrical shock Navini Networks, Inc., expressly requires that when using Navini electronic equipment always follow the basic safety precautions to reduce the risk of electrical shock, fire, and injury to people 1234. Follow all airport and FAA regulations when using the 5674 051123_pv1.5_Ripwave-MX Modem User Guide_40-00382-00b(prelim4.4.2)
Navini Networks, Inc. Ripwave-MX Modem User Guide or fire. place the equipment on an unstable surface. It can fall and cause injury or damage to the nd nly When the equipment does not operate properly or shows a distinct change in performance. a ery Caution & Procedures WARNING! To reduce risk of injury or fire, follow these instructions when handling a battery. 1. Risk of explosion is possible if the battery is replaced with one not supplied by Navini Networks. 2. Do not dispose of the battery in a fire. It may explode. Check with the local codes for battery disposal guidelines. . Do not open or mutilate the battery. The battery contains substances that are toxic, corrosive, or harmful to immediatel. Do not attempt to recharge the battery by any means except per the instructions in this manual. . Exercise care when handling the battery to prevent shorting the battery with conducting materials 8. 10. Do not equipment. 11. Do not disassemble the equipment. Removing covers exposes dangerous voltages or other risks aalso voids the warranty. Incorrect reassembly can cause equipment damage or electrical shock. Oan authorized repair technician should service this product. 12. Do not expose the equipment to extreme hot or cold temperatures. 13. Do not use the equipment under the following conditions: • When the equipment has been exposed to water or moisture. • When the equipment has been damaged. • When the power cord is damaged or frayed. • B tt 3humans. If battery substances come in contact with the skin, seek medical helpy. 45. Remove the battery from the equipment if the equipment is not going to be used for a long period of time. The battery could leak and cause damage to the equipment. 6such as bracelets, rings, and keys. 7. Store the battery pack in a dry place, 0 to +40 degrees Celsius. Dispose of used batteries according to environmental guidelines. 5 051123_pv1.5_Ripwave-MX Modem User Guide_40-00382-00b(prelim4.4.2)
Navini Networks, Inc. Ripwave-MX Modem User Guide required to comply with FCC RF LMX Modems except for the 2.6 LMX 20 cm) or more must be intained between the antenna and all persons during device operations to ensure compliance th th For the 2.6 LMX Modem with a window unt, een the window mount te cannot be maintained, exposure to RF levels that exceed the FCC’s limits may result. t se t off and on, the user is encouraged g measures: 2) Increase the separation between the equipment and the receiver, 3) Connect the equipment to an outlet on a circuit that is different from the one to which the receiver is connected, 4) Consult the dealer or an experienced radio/TV technician for additional suggestions. INFORMATION TO USER This device has been authorized as a radio frequency transmitter under the appropriate rules of the Federal Communications Commission. Any changes or modifications not expressly approved by Navini Networks could void the user’s authority to operate the equipment. INFORMATION REGARDING ANTENNAS This device has three embedded antennas: one upright antenna with approximately 2 dBi gain and two patch antennas, one on each side of the device. Each patch antenna has approximately 6 dBi gain. Regulatory Information FCC Notice CAUTION: This device is a Radio Frequency transmitter. It is exposure requirements for transmitting devices. For all with window mount, a minimum separation distance of 8 inches (mawi e FCC’s rules for Radio Frequency Exposure.mo a minimum of 8.3 inches (21 cm) or more must be maintained betwan ng device operations. If this minimum distancenna and all persons duri FCC Compliance and Advisory Statemen Tested To Comply With FCC Standards This equipment has been tested and found to comply with the limits for a class B digital device, Pursuant to Part 15 of the FCC rules. The operation is subject to the following two conditions: FOR HOME OR OFFICE USE(1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cauundesired operation. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed or used in accordance with the instructions, may cause harmful interference toradio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipmento try to correct the interference by one or more of the followin1) Reorient or relocate the receiving antenna, 6 051123_pv1.5_Ripwave-MX Modem User Guide_40-00382-00b(prelim4.4.2)
Navini Networks, Inc. Ripwave-MX Modem User Guide Introduction Congratul(LMX) M PackInve LMX Mo ations! The Liquid Cystal Display Ripwave™-MX odem is a user-friendly, easy-to-install device that helps you connect wirelessly to the Internet. It provides complete broadband Internet access to residential and small office/home office (SOHO) customers without the necessity of professional notify the supplier from whom you obtained it. dapter Ethernet straight cable) e (on CD) 2.5-2.6, 3.4 & 3.5age tory hardware installation. The LMX Modem also provides nomadic service availability as a computer with this device is moved from room to room, location to location, or even city to city as long as there is coverage in the area. Please verify the contents of your LMX Modem package. If you do not find all of these items in your package,n• LMX Modem • • LMX Modem AC power aPC-to-LMX Modem cable (• Ripwave-MX Modem User Guid• Ripwave-MX Modem Quick Installation Guide • Navini Diagnostics Installation CD dels Your LMX Modem will operate in either the 2.3 GHz, 2.4 GHz, 2.5-2.6 GHz, 3.4 GHz, or 3.5 GHz range. Within each frequency range there are several model types, described on the next page. 2.3, 2.4,GHz LMX Modem2.3, 2.4, 2.5-2.6, 3.4 & 3.5GHz LMX Modem 7 051123_pv1.5_Ripwave-MX Modem User Guide_40-00382-00b(prelim4.4.2)
Navini Networks, Inc. Ripwave-MX Modem User Guide Operating Frequencies equirements ee, also, Addendum 1) Minimum omputing CR(S Modem Model Frequency Range Operating Band 2.3 GHz LMX 2305-2360 LMX E 2.305 GHz – 2.360 GHz WCS 2.4 GHz LMX 2400-2483 LMX E 2.400 GHz – 2.483 GHz ISM 2.5–2.6 GHz LMX 2.5-2.6 LMX E 2.500 GHz – 2.686 GHz EBS-BRS 3.4 GHz LMX 3410-3525 LMX E 3.410 GHz – 3.525 GHz WLL 3.5 GHz 3475-3600 LMX LMX E 3.475 GHz – 3.600 GHz WLL The “E” in the model name stands for Ethernet. Your computer should have this port for connecting the Modem. • An Ethernet connection will function with any Win32® or later). Operating System (Windows® 98 Operating System1: Ethernet Modems: Any Win32 Operating Syste(OS) - Windowsm XP , or later version. General Information:  Ensure that the pc network port is enabled. NT, Windows 982, Windows 98SE2, Windows 2000, Windows ME2, Windows3CPU: Pentium level or higher RAM: 32 MB or the Operating System minimum, whichever is greater Hard Drive: 50 MB free disk space for either monitoring software (Navini Diagnostics Tool)4Monitor: 256 colors, 800 x 600 resolution 1NOTE: To upgrade your Operating System after loading the Navini iagnostics software, you must first uninstall Navini Diagnostics prior to pgrading the OS. Otherwise, Navini Diagnostics will not work. See Uninstall structions in this Guide. The LMX Modem must be left powered ON whenever you shut down r restart any Windows 98 or ME platforms. If the Modem is off, a blue screen pears on the monitor. In the event that happens you will most likely have to ower cycle the PC. Windows XP must be Service Pack Level 1 or higher. Duin2NOTE:oapp3NOTE: 8 051123_pv1.5_Ripwave-MX Modem User Guide_40-00382-00b(prelim4.4.2)
Navini Networks, Inc. Ripwave-MX Modem User Guide Physical haracteristics Navini Diagnostics software is supported on Win98, Win98SE, Win nME, W r higher, ac10) r Red Hat ac users m t exts T ual w ou ce installing t X Mod softw ve to o e onve lue If you experience any difficulties with your unit, please contact your Service Provider or the vendor fromLMX Modem. C 4NOTE:2000, Wi Linux 8.0 or hiinXP ogher. M Mac X (also called Must have the Snuffi or higher, oraction oftware. his manhe LMill guide yem and through the simple proare, which has been dess of lopedptimize the ase and c nience for you, our va d customer. whom you obtained your The following figure shows the physical characteristics of the Ripwave-MX LMX Modems. Front Antenna LMX Modems (2.3, 2.4, 2.5-2.6, 3.4, & 3.5 GHz) Liquid Crystal DisplayOn/Off ButtonBackPower Adapter ConnectionEthernet Cable ConnectionFront Antennaid CLiqu rystal DisplayOn/Off ButtonFront Antennaid CLiqu rystal DisplayOn/Off ButtonBackPower Adapter ConnectionEthernet Cable ConnectionBackPower Adapter ConnectionEthernet Cable Connection9 051123_pv1.5_Ripwave-MX Modem User Guide_40-00382-00b(prelim4.4.2)
Navini Networks, Inc. Ripwave-MX Modem User Guide 051123_pv1.5_Ripwave-MX Modem User Guide_40-00382-00b(prelim4.4.2) nstalling the MX Modem ee, also, Addendum 1) X ing the installation. IL(S The following instructions are for the installation of the LMXModem. Please read all instructions before attempting the installation. It is advisable to turn off the computer and the LModem before performM Step Action Illustration 1. Connect the Ethernet cable to the Ethernet port on the computer. 2. Connect the other end of the Ethernet cable to the LMX Modem. 3. Connect the AC power adapter to the LMX Modem. Plug the other end into a 110/220 VAC 60/50 Hz outlet. CAUTION! Only use the AC power adapter specifically supplied with the LMX Modem. Using any other adapter may cause damage to the Modem. Connection forEthernet cableConnection forEthernet cableConnection for Power Adapter Connection for Power Adapter 10
Navini Networks, Inc. Ripwave-MX Modem User Guide Installing the LMX Modem, continued 051123_pv1.5_Ripwave-MX Modem User Guide_40-00382-00b(prelim4.4.2) Step Action Illustration 4. Rotate the antenna on the LMX Modem clockwise 180 degrees P position. This CAUTION! Rotation or movement of the antenna in any other direction may cause to the Ureveals the LMX Modem liquid crystal display (LCD). damage to the LMX Modem. 5. Off button in. Turn the Modem ON by pushing the On/6. with ll If the LCD turns on, proceed to Step 7. If not, there is a problemthe Modem or the AC power adapter. Check acables for proper connection. If there is still a problem, contact the supplier who gave you the package. AntennaLiquid Crystal DisplayAntennaLiquid Crystal DisplayLiquid Crystal DisplayOn/O ButtonffOn/O ButtonffOn/O ButtonffLiquid Crystal Display (LCD)Liquid Crystal Display (LCD) 11
Navini Networks, Inc. Ripwave-MX Modem User Guide Installing the LMX Modem, continued Accessing the nternet roubleshooting CD Display I T L Step Action Illustration 7. Turn your computer onand log in. 8. Proceed to the “Troubleshooting” section of this manual. With your Modem now installed, and both the Modem and computer power on, you should be able to surf the Internet! To access the Internet, open the web browser that is installed on your compu After installation, if you are experiencing difficulties with your rne w the Minimum Computing Requir m 1 to ensure your computer meets those r s. Next, go back over the installation procedures and ensure those steps were completed properly. Assuming the computer requirements are met and the installation steps were completed as required, you will need to observe the signal sync and signal strength indicators on the LMX Modem. You also may need to install the monitoring software. This software, called the Navini Diagnostics, is provided on a CD that came in your Modem package. The Navini Diagnostics software assists in solving connection problems as well as providing other uab The LCD Display is a text-based display that provides valuable inform em’s operation. Used in conjun software, you can troubleshoot signal issues, network connections, and power problems. ter. Inte t connection, please revieements and Addenduequirementval le information. ation about the LMX Modction with the monitoring CONNECTEDQSCONNECTEDQSS12 051123_pv1.5_Ripwave-MX Modem User Guide_40-00382-00b(prelim4.4.2)
Navini Networks, Inc. Ripwave-MX Modem User Guide LCD Display, continued fo finitions for the LCD in ications. The llowing table provides de d LCD Indicator: SEARCHING Blinking flash: Syncing CONNECTED: Locked-on S: Signal Strength Meter (SSI) 0 bars S<100 1 bar -99<S≤-100 2 bars -96<S≤-99 3 bars -92<S≤-95 4 bars -88<S≤-91 5 bars -84<S≤-87 6 bars -80<S≤-83 7 bars -76<S≤-79 8 bars -70<S≤-75 Q: Signal Quality Meter (SNR) 0 bars Q<10 1 bar 10<Q≤-12 2 bars 13<Q≤-14 3 bars 15<Q≤-16 4 bars 17<Q≤-18 5 bars 19<Q≤-20 6 bars 21<Q≤-22 7 bars 23<Q≤-24 8 bars Q≥24 Activity Indicator: Flashing arrows: Traffic (both arrows flash) Blank: No Traffic Activity 13 051123_pv1.5_Ripwave-MX Modem User Guide_40-00382-00b(prelim4.4.2)
Navini Networks, Inc. Ripwave-MX Modem User Guide Installing Naviniagnostics i NavDiag) ote: The screenshots shown in these instructions were taken from E operating system, the screens you see may vary from the the instructions. D( Na laptop with Windows 2000. If you have a Windows 98, XP, or Mscreens shown in Step Action Illustration 1. Shut down all proincluding anti-virugrams, before installing the Navini Disoftware. s software programs, agnostics 2. Insert theDiagnositcs Installation CD into the CD-ROM drive. Navini 3. Open the CD by clicking the folderNavini_Diagnostics. on the My Computericon. Double-click on named 4. Double-click on the icon for the filenavdiag_ xe*. This will lly start the installation of Navini Diagnostics. s running Mac ac.sit or ile. Mac users will need the Snuffit extraction software. Example: windows.eautomatica*If your PC ior Linux software, you will need the navdiag_mnavdiag_linux.bin f5. The InstallAnywhere window appears. The progress bar indicates that InstallAnywhere has initialized. Windows 2000 Screen 14 051123_pv1.5_Ripwave-MX Modem User Guide_40-00382-00b(prelim4.4.2)
Navini Networks, Inc. Ripwave-MX Modem User Guide Installing Navini Diagnostics (NavDiag), continued 051123_pv1.5_Ripwave-MX Modem User Guide_40-00382-00b(prelim4.4.2) Step Action Illustration 6. The Navini Diagnostics Language screen appears*. Select a Windows 2000 Sclanguage and click OK ue. reen to contin7. ss bar being Windows 2000 Screen The progreindicates the files installed. 8. cs Windows 2000 Screen The Navini DiagnostiIntroduction screen appears. Click Next to continue. 9. e ent. is not accepted, you cannot install the software. Windows 2000 Screen The License Agreement screen appears. Read thicensing AgreemLSelect the I Accept option, and click Next to continue. NOTE: If the License Agreement 15
Navini Networks, Inc. Ripwave-MX Modem User Guide Installing Navini iag), Diagnostics (NavDcontinued Step Action Illustration 10. The Choose Install the ish to continue. NOTE: The default installation folder provided by the software is shown in the illustration. Folder screen appears. Enter the name offolder where you winstall the software. Click Next toWindows 2000 Screen11. cut am Group, and click Next to continue. Windows 2000 Screen The Choose ShortFolder screen appears. Select the default, In a new Progr 12. eview the ontents for accuracy. lick Install to ontinue. or your installation and omputer, this screen The Pre-Installation Summary screen appears. RcCc Fcmay have different information than what is shown in the illustration. Windows 2000 Screen 13. The Installing screen will display as the application files are loaded. 16 051123_pv1.5_Ripwave-MX Modem User Guide_40-00382-00b(prelim4.4.2)
Navini Networks, Inc. Ripwave-MX Modem User Guide Installing Navini iagnostics (NavDiag), roubleshooting sing Navini iagnostics NavDiag) Dcontinued TUD( Step Action Illustration 14. At the Install Complete lick Done to Windows 2000 Screen screen, cclose the window. To open the Navini Diagnostics software application, double-click on the Navini Diagnostics icon on your desktop. Navini Diagnostics.lnk The Connection Status screen will open and display data if the Modem is in session. The screen will refreshsecond. live data every 17 051123_pv1.5_Ripwave-MX Modem User Guide_40-00382-00b(prelim4.4.2)
Navini Networks, Inc. Ripwave-MX Modem User Guide 051123_pv1.5_Ripwave-MX Modem User Guide_40-00382-00b(prelim4.4.2) sing continued sent the PC, the co een the PC and the em ction betweeBase Station, and the Base Station to which the Modem is commu rks over the connections indicate working connections. If the connection between the PC and the Modem or between the odem and the Base Station is interrupted, an “X” is positioned ver the corresponding icon. The Signal Strength and Signal Quality are dynamic bar areas that dicate how well your Modem is receiving signals from the Base ceived by the Modem. The strength of the signal is represented by a group of colored bars. The higher the pile of bars goes, the stronger the signal is. The color of the bars also gives an indication of the strength of the signal. Green lines indicate an excellent signal. Orange lines indicate a good signal while red lines indicate a weak signal. Troubleshooting UNavini Diagnostics (NavDiag), The icons repre nnection betwMod , the Modem, the connenicating. Check man the Modem and the Mo inStation. In particular, the Signal Strength bar area graphically represents the strength of the Absolute BTS Synchronization Signal re 18
Navini Networks, Inc. Ripwave-MX Modem User Guide Troubleshooting Using Navini Diganostics (NavDiag), continued The Signal Quality bar area graphically represents the Signal-to-Noise Ratio (SNR) of the downlink access code channel (ACC) received by the Modem. Again, the quality of the signal is represented by a group of colored bars. The higher the pile ofgoes, the better the SN bars R of the signal. The color of the bars also ives an indication of the quality of the signal. Green lines indicate n excellent signal or an SNR greater than 21. Orange lines dicate a good signal or an SNR greater than or equal to 13 but ss than or equal to 21. Red lines indicate a weak signal or an SNR ss than 13. o ther wireless devices (microwave vens, cordless phones), and away from metal objects (shelves, file abinets). As the LMX Modem is repositioned, observe the Signal trength and Signal Quality bars. Position the Modem for aximum signal strength and quality. he History graphs plot the change in signal strength and signal t the bottom of the Connection Status screen, are four parameters. hese parameters are BTS ID, Network ID, Active SW Version, nd Standby SW Version. The BTS ID and Network ID indicate e BTS to which the Modem is currently synchronized and the etwork in which the Modem is operating. Active SW Version and tandby SW Version indicate the version number of the software gainlele To increase the strength and quality of the signal, change the location of the LMX Modem. Try moving it closer to a window, ta higher location, away from oocSm Tquality over time. The graphs cover the last minute and are updatedevery second. Read the graphs from right to left. The right side of the graph represents the most recent status of your Modem. ATathnS19 051123_pv1.5_Ripwave-MX Modem User Guide_40-00382-00b(prelim4.4.2)
Navini Networks, Inc. Ripwave-MX Modem User Guide Troubleshooting Using Navini Diganostics (NavDiag), continued 051123_pv1.5_Ripwave-MX Modem User Guide_40-00382-00b(prelim4.4.2) he Configuration screen enables you to update your Modem’s ftware if you are so directed by your Service Provider. If you ust update your Modem’s software, your Service Provider will rovide you with instructions regarding what to do. he Allow Customer Satisfaction Reporting box gives you control ver whether your Service Provider is allowed to monitor your parameters evolve over time. With this screen, you can select up to currently loaded in the “active side” and “standby side” of the Modem’s flash memory. The two letters in parenthesis following the release number indicate the type of software load. JD indicates Joint Detection, while EN indicates Enhanced Nulling. On the left-hand side of the screen, there are five screen options: Connection Status, Configuration, Trend Analysis, Statistics, andAbout. The following screen will appear when you press the Configuration button. Tsomp ToModem using the remote CPE Logging function and to use your computer to store the CPE log files created by this function. By default, this box is checked which means the Service Provider canmonitor your Modem. The Trend Analysis screen enables you to view how some Modem20
Navini Networks, Inc. Ripwave-MX Modem User Guide Troubleshooting Using Navini Diganostics (NavDiag), continued three parameters to plot. To view the Trend Analysis screen, press y pressing the Plot Graph button, the following screen will ppear. This screen displays the value of the selected parameters ver the last five minutes, updated once every second. The graphic rolls from right to left. cs screen, press the Statistics button. The the Trend Analysis button. Baosc To view the Statististatistics screen enables you to view the current value of selected parameters. These values are updated as they change over time. 21 051123_pv1.5_Ripwave-MX Modem User Guide_40-00382-00b(prelim4.4.2)
Navini Networks, Inc. Ripwave-MX Modem User Guide Troubleshooting Using Navini Diganostics (NavDiag), continued The About screen provides vital information such as the version of e Navini Diagnostics software currently installed in your omputer. It also provides a website address and telephone number out n, vides help text on the functionality of the avDiag program. The second option, About NavDiag, is quivalent to clicking on the About icon. thcwhere you can contact your Service Provider. To view the Abscreen, press the About button. An example of the About screen follows. A Help button appears on the top right corner of all the NavDiag windows. The Help button gives you two options. The first optioOn NavDiag, proNe 22 051123_pv1.5_Ripwave-MX Modem User Guide_40-00382-00b(prelim4.4.2)
Navini Networks, Inc. Ripwave-MX Modem User Guide 051123_pv1.5_Ripwave-MX Modem User Guide_40-00382-00b(prelim4.4.2) iagnostics NavDiag) for some reason you need to uninstall the Navini Diagnostics ftware, e.g., to upgrade your Operating System software, follow e procedure below. ote: The screen shots shown in these instructions were taken om a laptop with Windows 2000. If you have a Windows 98, XP, r ME operating system, the screens you see may vary from the reens shown in the instructions. Uninstalling Navini D( Ifsoth Nfrosc Step Action Illustration 1. On your computer screen lower left corner, click on Start > Programs > NavDiag > Uninstall. Windows 2000 Screen 2. The Install-Anywhere Un installer screen appears. Click Uninstall. Windows 2000 Screen 3. The screen will indicate the application files are uninstalled. Windows 2000 Screen 23
Navini Networks, Inc. Ripwave-MX Modem User Guide Uninstalling Navini Diagnostics (NavDiacontinued g), ptional atteries ptional External attery Packs OB OB Step Action Illustration 4. The Uninstall Complete screen appears w hen finished. Click on Quit Windows 2000 Screen to close the Uninstall screen. 5. e uninstall process. This will ensure the uninstall process completes successfully. Restart the PC to complete th LM ptional externassocia se battery packs aExternal Battery Pack (S-EBP) and the Heavy Duty-External Battery Pack (HD-EBP). The Standard External Battery Pack (S-EBP) provides approximately 16 WHeavy Duty-External Battery Pack (HD-EBP) provides approximately 44 Watt-Hours of power. This section describes how to install and charge the optional external battery packs. The ex stalled insidthey are connected to the Modem. Before we discuss how to connect and charge the external battery packs, let’s discuss the similarities and differences between the Standard External Battery Pack (S-EBP) and the Heavy Duty External Battery Pack (HD-EBP).  Both the S-EBP and HD-EBP can be used with any of the LMX Modems.  The HD-EBP provides 44 Watt-Hours of power while the S-EBP provides 16 Watt-Hours of power. The X Modems have two oted with them. Theal battery cks re the Standard paatt-Hours of power while the . ternal batteries are not in e the Modem. Instead 24 051123_pv1.5_Ripwave-MX Modem User Guide_40-00382-00b(prelim4.4.2)
Navini Networks, Inc. Ripwave-MX Modem User Guide Optional External Battery onnecting the tandard External attery Pack (S- The amount of time the S-EBP and HD-EBP can operate before c varies. This time is dependent of the usage run on the w g table shows example app ong the batteries can run before a rec e Approximate hours of Usage Before Recharge Required Packs, continued CSBEBP) re harging LMX Modem. The folloroximations for how lharge is required. Usagin S-EBP HD-EBP Standard Up to 2.5 Up to 8 Moderate 1.2 Approximately 4 Heavy Up to 1 Up to 3 con any of the LMX Modems, plug the battery’s pig-tail cord into the input socket located on the back of the Mo To nect the S-EBP to dem. 25 051123_pv1.5_Ripwave-MX Modem User Guide_40-00382-00b(prelim4.4.2)
Navini Networks, Inc. Ripwave-MX Modem User Guide Navini Networks, Inc. Ripwave-MX Modem User Guide 26 051123_pv1.5_Ripwave-MX Modem User Guide_40-00382-00b(prelim4.4.2) The Indicator Light on the Standard External Battery Pack (S-EBP) Charging the Standard External Battery Pack (S-EBP) The S-EBP has one indicator light that resides on top of the unit. This light has four states associated with it. The states are described below.  Light is off when any of the following apply: • The battery is not connected to a Modem or to the battery charger • The battery is connected to a Modem but the Modem is off • The battery is connected to a Modem and the Modem is on but the battery power is depleted  Light is green when the battery is on and fully charged.  Light is amber when the battery has power but is no longer fully charged. If the battery is connected to the battery charger, an amber light means the battery is being charged.  Light is red when the battery is low on power. When the battery is low, it has approximately 15% of its charge left. The S-EBP will need to be recharged when the battery is connected to a Modem and the Modem is turned on but the LED on top of the battery remains off (indicating the battery has no power) or is red (indicating the battery level is low). To recharge the S-EBP, use only the 12V charger that came with the S-EBP. Using any other charger may damage the battery. To charge the S-EBP, plug the 12V adapter into the 12V input socket on the S-EBP. NOTE: The battery may charge while it is connected to a Modem. NOTE: Do not attempt to plug the 12V adapter into the Modem as this may harm the Modem. 26 051123_pv1.5_Ripwave-MX Modem User Guide_40-00382-00b(prelim4.4.2)
Navini Networks, Inc. Ripwave-MX Modem User Guide 051123_pv1.5_Ripwave-MX Modem User Guide_40-00382-00b(prelim4.4.2) nd isconnecting the eavy Duty xternal Battery ack (HD-EBP) If yof t ck, foll Connecting aDHEP ou have a HD-EBP, the battery pack is installed in the bottom he LMX Modem. To install and or remove the battery paow the steps based on your model of Modem. Step Action Illustration 1. De e front buon the HD-EBP so that the front prong moves intowards the center of theH press th tton D-EBP. 2. Place the back slot of the LMX Modem over the back prong of the HD-EBP. 3. Place the front part of the opening on the LMX Modem over the front prong on the battery. 4. Release the button on the battery. 5. Press firmly down on the Modem so that the Modem firmly connects with the HD-EBP. FrontbuttonFront prong Back prongFront slot Back slotFrontbuttonFront prong Back prongFrontbuttonFront prong Back prongFront slot Back slotFront slot Back sl ot27
Navini Networks, Inc. Ripwave-MX Modem User Guide Connecting and Disconnecting the HD-EBP, continued The Indicator Ligon the ht Heavy Duty xternal Battery ack (HD-EBP) EP Step Action Illustration 6. Plug the HD-EBP’s pig-tail cord into the power slot on the Modem. 7. To remove the battery pack from the Modem, unplug the pig-tail cord. Depress the front button on the HD-EBP. Lift the Modem off of the battery pack. he HD-EBP has one indicator light T that resides on the back end of ry is not connected to a Modem or to the battery charger • The battery is connected to a Modem but the Modem is off • The battery is connected to a Modem and the Modem is on but the battery is empty of power Light is green when the battery is on and fully charged. Light is amber when the battery has power but is no longer fully charged. If the battery is connected to the battery charger, an amber light means the battery is being charged. Light is red when the battery is low on power. When the battery is low, it has approximately 15% of its charge left. the unit near the pig-tail cord. This light has four states associatedwith it. The states are described below.  Light is off when any of the following apply: • The batte 28 051123_pv1.5_Ripwave-MX Modem User Guide_40-00382-00b(prelim4.4.2)
Navini Networks, Inc. Ripwave-MX Modem User Guide 051123_pv1.5_Ripwave-MX Modem User Guide_40-00382-00b(prelim4.4.2) harging the P) are & aintenance he HD-EBP will need to be recharged when the battery is n ). HD-EBP, use onl rger that came with HD arger may damage the battery. To cha  Plug the 12V adapter into the 12V input socket on the HD-EBP.  Plug the other end of the adapter into an electrical wall socket. NOTE: Do not attempt to plug the 12V adapter into the Modem as this may harm the Modem. NOTE: The battery may charge while it is connected to a Modem. The LM to give years of trouble-free service. ens following care and maintenance truc Ke st and moisture. If the Modem gets we ediately. Handle the Modem gently. Dropping it or mishandling it can cause damage to the plastic shell or the electronic circuitry. Keep the Modem away from high temperatures. Heat can cause damage to the plastic shell or the electronic circuitry. CHeavy Duty External Battery Pack (HD-EB CM Tconnected to a Modem and the Modem is turned on but the LED othe back of the battery remains off (indicating the battery has no power) or is red (indicating the battery level is low To recharge the y the 12V chathe -EBP. Using any other chrge the HD-EBP: X Modem is designedure operation, read theTo ins tions. ep the Modem free of dut, use a towel to dry it immPig   -tail Cord12V Input Socket Plugs into Wall Socket 29
Navini Networks, Inc. Ripwave-MX Modem User Guide Care & Maintenance, pgrading the Use only a mild detergent and a soft, damp cloth to clean the o not use any chem ves to clean the pla  If t h the Modem, do not attempt to repair it yourself. Report the problem to your Service Provider.  If you are going to upgrade your Operating System after loading the Navini monitoring software (Navini Diagnostics), you must first uninstall the monitoring software prior to upgrading the OS. Otherwise, the monitoring software will not work. See Uninstall instructions in this Guide.  The LMX Modem must be left powered ON whenever you shut down or restart any Windows 98 or ME platforms. If the Mo n ap ears on the monitor. In the event this happens you will mostly likely have to power cycle the akes e Modem work. our Modem. r upgrade the Modem. This method is used for systems that have  You u to use your Navini This 0 powered on during the OTA upgrade process. The OTA upgrade is ormally transparent to the user; in other words, there should be no oticeable service interruption. The web or CD upgrade comes ith instructions and takes a minimal amount of time to complete. ote: If you use the Navini Diagnostics Tool to upgrade your odem software load, the computer connected to your Modem continued UModem M dem. Do icals or abrasistic shell. here is a problem witdem is off, a blue scree PC. pThere are three different ways to upgrade the software that mth  Your Service Provider may perform an over-the-air (OTA) upgrade, where the up-to-date software files are transferred wirelessly from the Base Station to y  Your Service Provider may provide a downloadable web file oCD-ROM with software to be installed on your PC and used toa software release prior to 4.0. r Service Provider may instruct yoDiagnostics Tool to upgrade your Modem software load.method is used for systems that have a software release of 4.or greater. The latter two methods are used only if the Modem was not nnw NM30 051123_pv1.5_Ripwave-MX Modem User Guide_40-00382-00b(prelim4.4.2)
Navini Networks, Inc. Ripwave-MX Modem User Guide must already have an IP address. If your computer does not hIP address, contact your Service Provider. If you attempt to upgrade your Modem software through the Navini Diagnostics Tool and the computer does not have an assigned IP aave an ddress, you ay see one of the following error messages: m 31 051123_pv1.5_Ripwave-MX Modem User Guide_40-00382-00b(prelim4.4.2)
Navini Networks, Inc. Ripwave-MX Modem User Guide ADDENDUM 1: R Troubleshooting - For Use With AllC Operating Systems rior to installing the Navini System eets the criteria given in the tab ay ccur as a result of installation. It stalled prior to installing the Naipwave™-MX Modem - PC Ripwave-MX LMX Modems and Navini Diagnostics Software - PP Diagnostics software, please check to insure that the PC Operating le below. If these criteria are not met, unpredictable problems m is recommended that the user have the latest Windowsmoc updatesvini Diagnostics software. in Operating System Ethernet interface Notes Win95 Supported 1, 2 Win98 Supported 2 Win98, 2nd ed. Supported 2 WinME Supported 2 Win 2000 Supported 2 Win NT 3.0/4.0 Supported 1, 2 Win XP Supported 3 Note 1: Internet Explorer 3.0 orote 2: Requires Service Pack 1 ote 3: To load the Navini Diagnos ileges. thernet Interface he Ethernet Modem may be con onnect multiple PC devices to a PC sers and is analogous to a multi- thernet LAN. Check with your Service rovider if multiple IP addressing is required for your particular configuration. The distinct advantage of e Ethernet Modem is that it s it ideal r small businesses that have a m ddresses can be assigned to the d ents, or oint-to-Point Protocol Over Eth E). ultiple Interface Environmhen a PC has an internal in LMX odem, you should do the fo If the wireless connectio If the built-in wireless connection is required for local networking and wireline Ethernet is used via the LMX Modem for Int hat the wireline interface’s defa higher is required tics software, the user MUST have Administrative privNN ET nected to a PC via an Ethernet connection. Also, it is possible tosingle Modem. The multi-PC configuration is transparent to the PC configuration on a normal EcuPth connects to any device that has an Ethernet interface. This makeix of devices, such as Unix machines, Apple Computers, etc. IPevices dynamically via a DHCP server, or as Fixed IP assignmernet (PPPofoaP M ents terface (for example, a Wireless Ethernet interface) in addition to thellowing: n is not required, disable the internal wireless connection WM ••ernet connection, change the interface metric configuration so tult gateway is used. (See your Operating System’s User Guide.) 32 051123_pv1.5_Ripwave-MX Modem User Guide_40-00382-00b(prelim4.4.2) 3232
Navini Networks, Inc. Ripwave-MX Modem User Guide 3333outers either the Navini LMX Mon through a uter. onfiguration Options Results of Correct Navini Diagnostics Installation Experienced PC users can check the results of the Navini Diagnostics installation by looking at the log file that is created during the installation process. The log file is named “Navini_Diagnostics_InstallLog.log.” It is located under c:\Program Files\Navini Diagnostics. ------- Install Begin: Tue Jul 20 12:15:22 CDT 2004 Install End: Tue Jul 20 12:15:30 CDT 2004 Created with Zero G's InstallAnywhere 4.5.3 Enterprise Build 1394 Summary ------- Installation: Successful with warnings. 2 SUCCESSES 1 WARNINGS 0 NONFATAL ERRORS 0 FATAL ERRORS RN itor nor the Navini Diagnostics software will work if it goes ro C Modem connectedto a single computer(Ethernet) Modem providingaccess to the Ivia an Ethernenternet t hub Host computer usedas a router to network(USB or Ethernet) Modem providingaccess to the Internet via an Ethernet hub Modem providingaccess to the Internet via an Ethernet hub Host computer usedas a router to network(USB or Ethernet) Host computer usedas a router to network(USB or Ethernet) Modem connectedto a single computer(Ethernet) Modem connectedto a single computer(Ethernet) 33 051123_pv1.5_Ripwave-MX Modem User Guide_40-00382-00b(prelim4.4.2)
Navini Networks, Inc. Ripwave-MX Modem User Guide Action Notes: o stall Loheck DiskESSFUL tes: NOTE - Required Disk Space: 29,363,315; Free Disk Space: 30,806,179,840 \Navini Networks\NavDiag, ValueName: stallDirectory Status: W s: WARNIN M stry Entry: Key: HKEY_LOCAL_M FTWARE\Navin orks, Value Name: , Value Data: Status: SUCCESSFUL M : Key: HKEY_LOCAL_M FTWARE\Navin etworks\NavDiag, Value Name: , Value D Status: SUCCESSFUL M ry Entry: Key: HKEY_LOCAL_M FTWARE\Navin etworks\NavDiag, Value Name: ry, Value Data: C:\Program Files\Navs\NavDiag\Uninstall\ vini Diagnostics (Install All Uninstaller Components) ninstall NavDiag.lax Status: SUCCESSFUL stall File: C:\Program Files\NavDiag\Uninstall\resource\iawin32.dll tal N ne. g Detail: In C Space: C:\Program Files\NavDiag Status: SUCC Additional No Install Directory: C:\Program Files\NavDiag\ Status: SUCCESSFUL Get Registry Entry: Key: HKEY_LOCAL_MACHINE\SOFTWAREInARNING Additional Note G - Win32Exception ake Regi ACHINE\SO i Netwake Registry Entry ACHINE\SO i Nata: ake RegiststallDirectoACHINE\SODiag i NIn Status: SUCCESSFUL Install Directory: C:\Program File Status: SUCCESSFUL Install Uninstaller: Na Status: SUCCESSFUL Install Directory: C:\Program Files\NavDiag\jre Status: SUCCESSFUL Install File: C:\Program Files\NavDiag\Uninstall\Uninstall NavDiag.exe Status: SUCCESSFUL Install File: C:\Program Files\NavDiag\Uninstall\U Install Directory: C:\Program Files\NavDiag\Uninstall\resource\ Status: SUCCESSFUL In Status: SUCCESSFUL Ins l File: C:\Program Files\NavDiag\Uninstall\resource\remove.exe Status: SUCCESSFUL 34 051123_pv1.5_Ripwave-MX Modem User Guide_40-00382-00b(prelim4.4.2) 3434
Navini Networks, Inc. Ripwave-MX Modem User Guide Make Registry Entry: Key: me: Status: SUCCESSFUL KEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\Navini Diagnostics, Value Name: UninstallString, Value Data: "C:\Program Files\NavDiag\Uninstall\Uninstall NavDiag.exe" Status: SUCCESSFUL Install Uninstaller: Navini Diagnostics (Install All Uninstaller Components) Status: SUCCESSFUL Create LaunchAnywhere: Navini Diagnostics.exe (Install All LaunchAnywhere Java Executable Components) Status: SUCCESSFUL Install File: C:\Program Files\NavDiag\Navini Diagnostics.exe Status: SUCCESSFUL Install File: C:\Program Files\NavDiag\Navini Diagnostics.lax Status: SUCCESSFUL Create LaunchAnywhere: Navini Diagnostics.exe (Install All LaunchAnywhere Java Executable Components) Status: SUCCESSFUL Install Directory: C:\Program Files\NavDiag\data\ Status: SUCCESSFUL C:\Program Files\NavDiag\data\images\splash.gif Status: SUCCESSFUL le: C:\Program Files\NavDiag\data\images\buttonbar.gif data\images\about2.gif stall File: C:\Program Files\NavDiag\data\images\about1.gif Status: SUCCESSFUL le: C:\Program Files\NavDiag\data\images\about.gif C:\Program Files\NavDiag\data\images\uninstall.gif tatus: SUCCESSFUL rogram Files\NavDiag\data\log\ s: SUCCESSFUL HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\Navini Diagnostics, Value NaDisplayName, Value Data: Navini Diagnostics Make Registry Entry: Key: H Install Directory: C:\Program Files\NavDiag\data\images\ Status: SUCCESSFUL Install File: C:\Program Files\NavDiag\data\images\billboard.gif Status: SUCCESSFUL Install File: stall FiIn Status: SUCCESSFUL nstall File: C:\Program Files\NavDiag\I Status: SUCCESSFUL In nstall FiI Status: SUCCESSFUL Install File: S C:\PInstall Directory: Statu 35 051123_pv1.5_Ripwave-MX Modem User Guide_40-00382-00b(prelim4.4.2) 3535
Navini Networks, Inc. Ripwave-MX Modem User Guide Install Directory: C:\Program Files\NavDiag\data\lib\ Status: SUCCESSFUL C:\Program Files\NavDiag\data\lib\ctl.jar Status: SUCCESSFUL Diag\data\lib\navDiag.jar \lib\jfreechart-0.9.13.jar tatus: SUCCESSFUL Status: SUCCESSFUL avDiag\data\doc\ Status: SUCCESSFUL irectory: C:\Program Files\NavDiag\config\ stall Directory: C:\Documents and Settings\luis\Start Menu\Programs\NavDiag\ reate Shortcut: C:\Documents and Settings\luis\Start Menu\Programs\NavDiag\Navini Diagnostics.lnk reate Shortcut: C:\Documents and Settings\luis\Start Menu\Programs\NavDiag\Uninstall.lnk stall Directory: C:\Documents and Settings\luis\Desktop\ - Directory already existed reate Shortcut: C:\Documents and Settings\luis\Desktop\Navini Diagnostics.lnk Install File: Install File: C:\Program Files\Nav Status: SUCCESSFUL Install File: C:\Program Files\NavDiag\data Status: SUCCESSFUL Install File: C:\Program Files\NavDiag\data\lib\jcommon-0.8.8.jar S Install File: C:\Program Files\NavDiag\data\lib\log4j.jar Install Directory: C:\Program Files\N Install D Status: SUCCESSFUL Install File: C:\Program Files\NavDiag\config\NavDiag.lcf Status: SUCCESSFUL In Status: SUCCESSFUL C Status: SUCCESSFUL C Status: SUCCESSFUL In Status: SUCCESSFUL Additional Notes: NOTE C Status: SUCCESSFUL 36 051123_pv1.5_Ripwave-MX Modem User Guide_40-00382-00b(prelim4.4.2) 3636
Navini Networks, Inc. Ripwave-MX Modem User Guide EnADDENDUM 2: d User Software License Agreement between Buyer ARTICLE 1 .1 Act of Assent.Navini Networks, Inc. and IMPORTANT MESSAGE 1 Installing the Software indicates that you have read, understand and accept this ARTICLE 2 License Agreement. LICENSES 2.1 Grant of License. The Software and related Documentation, are the intellectual property of Navini tected by law. Navini Networks, Inc. grants to Buyer a persoNetworks, Inc. and are prononexclusive, nontransferable worldwide license, for revocable use (as permnal, itted herein) of the ions of this License Agreement and the Master Supply ttached. Buyer is permitted to install and use the Software on its server, but only in conjunction with the Navini Hardware. Buyer is not permitted to rent, sell or rties. Software based on the terms and conditAgreement to which it is aotherwise transfer the Software to any third pa.2 Ownership Rights. Under this Agreement, Buyer does not acquire any rights of ownership in the eleases and versions licensed by Navini rsuant to this License Agreement, whether in printed or machine-readable format. Buyer acquires only the right to use the Software and related Documentation nt. Buyer promises to keep the Software in of Navini Networks, Inc. and agrees to destroy or return the Software sing the Software or upon termination or e Agreement for any reason. .3 Backup Copies2Software and related Documentation and subsequent rNetworks, Inc. to Buyer pusubject to the terms and conditions of this Agreemeconfidence for the benefit and all copies at such time as Buyer chooses to cease ucancellation of this Licens2. Buyer may copy the Software for safekeeping (archival) or backup purposes, ject to the provisions of this License ded that each copy shall include in readable format any and all arkings contained in the original. provided that all such copies of the Software are subAgreement, and also proviconfidential, proprietary, and copyright notices or m2.4 Assignment. The rights granted in this License Agreement are restricted for use solely by Buyer and may not be assigned, transferred, or sublicensed, however Buyer may grant access to its d to make use of the Software in the form in er solely for Buyer’s own computer server location. Buyer represents s not expressly delineated in this ply with all export, re-export, and other laws in its use of the Software. server to End-Users. Each Buyer shall be authorizewhich it is provided to Buythat it will not use the Software for any purpose that ir represents that it will comAgreement. Further Buye37 051123_pv1.5_Ripwave-MX Modem User Guide_40-00382-00b(prelim4.4.2) 3737
Navini Networks, Inc. Ripwave-MX Modem User Guide 2.5 Suitability. rmining which software best suits Buyer’s needs, for ting the Software, and for the results obtained. Accordingly, each d evaluate the Software’s capabilities before making ut licensing the software. b. Navini Networks, Inc. makes no representation that the Software conforms to or satisfies ncouraged to engage professional assistance engineers to evaluate the suitability of the Software for Buyer’s use. oftware is suitable for Buyer’s intended a. Buyer alone is responsible for deteinstalling and operaBuyer should determine its needs, ana final decision aboany federal, state, or local laws. Buyer is efrom attorneys andc. Navini Networks, Inc. makes no claims that the Spurposes. 2.6 Remote Digital Access. Navini Networks, Inc. reserves the right, but is not obligated to digitally purposes of upgrading and maintaining the Software. access the Software for the2.7 U.S. GOVERNMENT RESTRICTED RIGHTS. All Software provided to the U.S. Government ued on or after December 1, 1995 is provided with the commercial license rights and restrictions described elsewhere herein. All Software provided to the U.S. d prior to December 1, 1995 is provided with ided for in FAR, 48 CFR 52.227-14 (June 1987) or DFAR, 48 CFR TRADE SECRETS pursuant to solicitations issGovernment pursuant to solicitations issue“Restricted Rights” as prov252.227-7013 (Oct 1988), as applicable ARTICLE 3 3.1 Trade Secret. Navini Networks, Inc. considers the licensed Software covered by this License Agreement to be a trade secret. Navini Networks, Inc. does not disclose any information to ny design, w-how gained by access to the Software to Licensor’s competitors. oftware to develop a acknowledge, understand and agree, constitute a material breach of this License Agreement. Navini Networks, Inc. competitors or potential competitors. Buyer shall not disclose acode, or technological knoBuyer shall not use design, code, or documentation gained by access to the Speting software product. To attempt to or to do so, the Parties similar technology or a com3.2 Third Party Intellectual Property. Buyer acknowledges, understands and agrees that the licensed Copyright, Patent and other laws protect Third therwise bundled with the promises to keep such Third Party Intellectual Property in confidence to the benefit of the Third Party, agrees not to reverse engineer or otherwise decompile Third Party Intellectual Property, and agrees to stop using, destroy and/or return such Third Party owned Intellectual Property under the same terms and conditions as the licensed Software as set forth in this License Agreement. Software covered by this License Agreement may contain Intellectual Property owned by Third Parties and duly licensed to Navini Networks, Inc. Party Intellectual Property manufactured with, marketed with, or olicensed Software. Buyer 38 051123_pv1.5_Ripwave-MX Modem User Guide_40-00382-00b(prelim4.4.2) 3838
Navini Networks, Inc. Ripwave-MX Modem User Guide ARTICLE 4 4.1 Intellectual Property Indemnifica INDEMNIFICATIONS AND WARRANTY tion; Entire Liability. ARTICLE 15 OF THE SUPPLY AGREEMENT TO WHICH THIS AGREEMENT IS ATTACHED STATES THE ENTIRE LIABILITY OF NAVINI NETWORKS, I TH RESPECT TO INFRINGEMENT OF COPYRIGHTS, TRADE SECRETS, TRADEMARKS, PATENTS, AND OTHER INTELLECTUAL PROPERTY RIGHTS BY THE LICENSED SOFTWARE, DOCUMENTATION, OR ANY PARTS THEREOF, AND NAVINI NETWORKS, INC. SHALL HAVE NO ADDITION SPECT TO ANY ALLEGED OR PROVEN INFRINGEMENT. NC. WIAL LIABILITY WITH RE4.2 Warranty. EXCEPT AS GRANTED IN THE BODY OF THE SUPPLY AGREEMENT TO WHICH THIS LICENSE AGREEMENT IS ATTACHED, THE LICENSED SOFTWARE IS PROVIDED BY NAVINI NETWORKS, INC. “AS IS” AND WITHOUT WARRANTY OF ANY KIND OR NATURE, WRITTEN OR ORAL, EXPRESS OR IMPLIED, INCLUDING (WITHOUT LIMITATION) THE IMP ANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THIS LIMITATION OF WARRANTIES WAS A LIED WARRMATERIAL FACTOR IN THE ESTABLISHMENT OF THE LICENSE FEE CHARGED FOR EACH SPECIFIC ITEM OF SOFTWARE LICENSED. ARTICLE 5 LIMITATION OF LIABILITY 5.1 Consequential Damages. TO THE MAXIMUM EXTENT PERMITTED BY THE APPLICABLELAW, IN NO EVENT SHALL NAVINI NETWORKS, INC. OR ANY THIRD PARTY INVOLVED IN THE CREATION, PRODUCTION, DELIVERY, OR LICENSING OF THE SOFTWARE BE LIABLE FOR ANY LOST REVENUES, PROFITS OR DATA OR OTHER SPECIAL, INDIRECT, INCIDENTAL, CONSEQUENTIAL, OR PUNITIVE DAMAGES, HOWEVER CAUSED AND REGARDLESS OF THEORY OF LIABILITY, EVEN IF NAVININETWORKS, INC. HAS, OR SHOULD HAVE HAD ANY KNOWLEDGE, ACTUAL OR CONSTRUCTIVE, OF THE POSSIBILITY OF SUCH DAMAGES. 5.2 License-Fee Limitation. Except for the indemnification provisions of Article 15, Navini Networks, Inc.’s maximum liability for damages is limited to the license fees paid by Buyer unthis Agreement for the particular licensed Software that caused the damages. der 5.3 Loss of Data. Software error can cause a significant loss of data. Navini Networks, Inc. shall not be responsible for any loss of data. Navini Networks, Inc.’s responsibility is to correct the Software error as provided in this License Agreement or the Supply Agreement to which it is attached. It is Licensee’s responsibility to have adequate backup procedures to protect Buyer from significant loss of valid data. 39 051123_pv1.5_Ripwave-MX Modem User Guide_40-00382-00b(prelim4.4.2) 3939
Navini Networks, Inc. Ripwave-MX Modem User Guide ARTICLE 6 OBJECT CODE ONLY-NO MODIFICATIONS cations6.1 Modifi . In order to maintain the “trade secret” status of the information contained in the shall noportionand other license information. This information is placed in the object-code portions to prevent unauthorized and unlicensed distributions of the Software. Buyer shall not subvert or change any unless 6.2 Licensed Software, Navini Networks, Inc. provides the Software in object-code form only. Buyert modify, enhance, adapt, disassemble, translate, decompile or otherwise decode any of the object code of the Software module. Buyer shall not use the Software without a license to the Software object code. The object code contains the license number, date of license, of this information. Further Buyer shall not make, full or partial, copies of any documentation whether printed or machine- readable media supplied with the Licensed Software expressly granted prior written permission by Navini Networks, Inc. Responsibility for Damages. Buyer is subject to the provisions of the Supply Agreement with respect to the Software (including Section 16). Buyer is fully liable and responsible for any damages, indirect or direct, and costs that Navini Networks, Inc. may incur if Buyer apposubcontractor who accesses the Software without Navini’s prior written consent. Buyer shall defend, indemnify, and hold Navini Netwints a orks, Inc., its directors, officers, employees, agents, Authorized Partners, and other representatives harmless accordingly for all costs and direct and indirect damages sustained by Navini Networks, Inc. However, if the subcontractor is pre-approved by Navini in writing for access to the Software, then this Section shall not apply. 6.3 Copyright Notices. Buyer shall not remove any copyright or proprietary rights notice or identification that indicates Navini Networks, Inc. ownership from any part of the licensed ware Copyri All righ Navinitrademtradem spective owners. Rev. 052302 Software, it being expressly understood and agreed that the existence of such copyright noticeshould not be construed as an admission or presumption that publication of the licensed Softhas occurred. END OF AGREEMENT ght © 2001-2005 Navini Networks, Inc. ts reserved. Printed in the USA. Networks is a registered trademark. Zero-Install, Ripwave, and Unwired by Navini are arks of Navini Networks, Inc. Other product and company names mentioned herein may be arks and/or service marks of their re40 051123_pv1.5_Ripwave-MX Modem User Guide_40-00382-00b(prelim4.4.2) 4040

Navigation menu