Cisco Systems 2400-MDM08-C2 Wireless Modem User Manual Ripwave Modem User Guide

Cisco Systems, Inc Wireless Modem Ripwave Modem User Guide

Manual

Download: Cisco Systems 2400-MDM08-C2 Wireless Modem User Manual Ripwave Modem User Guide
Mirror Download [FCC.gov]Cisco Systems 2400-MDM08-C2 Wireless Modem User Manual Ripwave Modem User Guide
Document ID620082
Application IDAe4NdGgEkB34lM/59/5kBA==
Document DescriptionManual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize191.41kB (2392665 bits)
Date Submitted2006-01-17 00:00:00
Date Available2006-01-17 00:00:00
Creation Date2005-11-18 09:47:12
Producing SoftwareAcrobat Distiller 6.0 (Windows)
Document Lastmod2005-11-28 10:38:28
Document TitleRipwave Modem User Guide
Document CreatorAcrobat PDFMaker 6.0 for Word
Document Author: M. Cox

Ripwave™-MX Modem User Guide
For use with all Ripwave-MX Modem models
Part Number 40-00382-00
Revision B, Version 1.0, PV1.3
November 23, 2005
Proprietary
All information disclosed by this document is the proprietary property of Navini Networks, Inc. and is protected
by copyright, trademark, and/or trade secret laws. All rights therein are expressly reserved.
Navini Networks, Inc.
Ripwave-MX Modem User Guide
TABLE OF CONTENTS
PERMISSIONS, TRADEMARKS & DISTRIBUTION.............................................................................3
SAFETY .......................................................................................................................................................4
REGULATORY INFORMATION ..............................................................................................................5
INTRODUCTION.......................................................................................................................................7
PACKAGE INVENTORY .........................................................................................................................7
LMX MODELS...........................................................................................................................................7
OPERATING FREQUENCIES .........................................................................................................................8
MINIMUM COMPUTING REQUIREMENTS ......................................................................................8
PHYSICAL CHARACTERISTICS ..........................................................................................................9
INSTALLING THE LMX MODEM ......................................................................................................10
ACCESSING THE INTERNET..............................................................................................................12
TROUBLESHOOTING ...........................................................................................................................12
LCD DISPLAY..........................................................................................................................................12
INSTALLING NAVINI DIAGNOSTICS (NAVDIAG) ........................................................................14
TROUBLESHOOTING USING NAVINI DIAGNOSTICS (NAVDIAG) ..........................................17
UNINSTALLING NAVINI DIAGNOSTICS (NAVDIAG) ..................................................................24
OPTIONAL BATTERIES .......................................................................................................................25
OPTIONAL EXTERNAL BATTERY PACKS ...................................................................................................25
CONNECTING THE STANDARD EXTERNAL BATTERY PACK (S-EBP) ........................................................26
THE INDICATOR LIGHT ON THE STANDARD EXTERNAL BATTERY PACK (S-EBP)....................................27
CHARGING THE STANDARD EXTERNAL BATTERY PACK (S-EBP)............................................................27
CONNECTING AND DISCONNECTING THE HEAVY DUTY EXTERNAL BATTERY PACK (HD-EBP).............28
THE INDICATOR LIGHT ON THE HEAVY DUTY EXTERNAL BATTERY PACK (HD-EBP) ............................29
CHARGING THE HEAVY DUTY EXTERNAL BATTERY PACK (HD-EBP) ....................................................30
CARE & MAINTENANCE .....................................................................................................................30
UPGRADING THE MODEM .................................................................................................................31
™
ADDENDUM 1: RIPWAVE -MX MODEM - PC TROUBLESHOOTING....................................33
ADDENDUM 2: END USER SOFTWARE LICENSE AGREEMENT.............................................38
051123_pv1.3_Ripwave-MX Modem User Guide_40-00382-00b(prelim4.4.2)
Navini Networks, Inc.
Ripwave-MX Modem User Guide
Permissions, Trademarks & Distribution
Copyright© 2001 - 2005, Navini Networks, Inc. All information contained herein and disclosed by this
document is confidential and the proprietary property of Navini Networks, Inc. and all rights therein are
expressly reserved. Acceptance of this material signifies agreement by the recipient that the information
contained in this document is confidential and that it will be used solely for the purposes set forth herein.
Acceptance of this material signifies agreement by the recipient that it will not be used, reproduced in
whole or in part, disclosed, distributed, or conveyed to others in any manner or by any means – graphic,
electronic, or mechanical, including photocopying, recording, taping, or information storage and retrieval
systems – without the express written permission of Navini Networks, Inc.
Navini Networks is a registered trademark. The Navini Networks logo, Zero-Install, Ripwave, and
Unwired by Navini are trademarks of Navini Networks, Inc. Other product and company names
mentioned herein may be trademarks and/or service marks of their respective owners.
Except for the hardware warranty, nothing herein constitutes any representation, warranty,
assurance, or guaranty of any kind.
Because of continuing developments and improvements in design, manufacturing, and deployment,
material in this document is subject to change without notification and does not represent any
commitment or obligation on the part of Navini Networks, Inc.
Navini Networks, Inc. shall have no liability for any error or damages resulting from the use of this
document.
All Navini Networks logos and trademarks are the property of Navini Networks, Inc. Unauthorized usage
is strictly prohibited without the express written permission of Navini Networks, Inc.
© 2001 - 2005 Navini Networks, Inc. All rights reserved.
051123_pv1.3_Ripwave-MX Modem User Guide_40-00382-00b(prelim4.4.2)
Navini Networks, Inc.
Ripwave-MX Modem User Guide
Safety
When using Navini Ripwave electronic equipment, always follow basic safety precautions to reduce the
risk of electrical shock, fire, and injury to people and/or property. Follow all warnings and instructions
that come with the equipment.
1. Do not use the equipment while you are in a bathtub, shower, pool, or spa. Exposure of the
equipment to water could cause severe electrical shock or serious damage to the equipment.
2. Do not immerse the equipment in any type of liquid. Use a damp clothe and if needed, water and a
mild detergent to clean the plastic shell. Unplug the equipment from the power source before
cleaning.
3. Follow all airport and FAA regulations when using the equipment on or near aircraft.
4. Only operate the equipment from the type of power source(s) indicated in this manual (110/220
VAC, 60/50 Hz adapter or Navini supplied battery). Any other type of input power source may cause
damage to the equipment.
5. Power the equipment using only the battery or the AC adapter cable provided, and in accordance with
the instructions specified in the user manual.
6. Do not use a frayed or damaged power cord. Do not place the power cord where it can be stepped on
or tripped over.
7. Do not touch wires where the insulation is frayed or worn unless the equipment has been
disconnected from its power source.
8. Do not overload wall outlets, power strips, or extension cords. This can cause serious electrical shock
or fire.
9. Do not place the equipment on an unstable surface. It can fall and cause injury or damage to the
equipment.
10. Do not disassemble the equipment. Removing covers exposes dangerous voltages or other risks and
also voids the warranty. Incorrect reassembly can cause equipment damage or electrical shock. Only
an authorized repair technician should service this product.
11. Do not expose the equipment to extreme hot or cold temperatures.
12. Do not use the equipment under the following conditions:
• When the equipment has been exposed to water or moisture.
• When the equipment has been damaged.
• When the power cord is damaged or frayed.
• When the equipment does not operate properly or shows a distinct change in performance.
051123_pv1.3_Ripwave-MX Modem User Guide_40-00382-00b(prelim4.4.2)
Navini Networks, Inc.
Ripwave-MX Modem User Guide
Regulatory Information
FCC Notice
CAUTION: This device is a Radio Frequency transmitter. It is required to comply with FCC RF
exposure requirements for transmitting devices. For all LMX Modems except for the 2.6 LMX
with window mount, a minimum separation distance of 8 inches (20 cm) or more must be
maintained between the antenna and all persons during device operations to ensure compliance
with the FCC’s rules for Radio Frequency Exposure. For the 2.6 LMX Modem with a window
mount, a minimum of 8.3 inches (21 cm) or more must be maintained between the window mount
antenna and all persons during device operations. If this minimum distance cannot be maintained,
exposure to RF levels that exceed the FCC’s limits may result.
FCC Compliance and Advisory Statement
Tested To Comply
With FCC Standards
FOR HOME OR OFFICE USE
This equipment has been tested and found to comply with the limits for a class B digital device,
Pursuant to Part 15 of the FCC rules. The operation is subject to the following two conditions:
(1)
This device may not cause harmful interference, and
(2)
This device must accept any interference received, including interference that may cause
undesired operation.
These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio frequency energy
and, if not installed or used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
1)
Reorient or relocate the receiving antenna,
2)
Increase the separation between the equipment and the receiver,
3)
Connect the equipment to an outlet on a circuit that is different from the one to which the
receiver is connected,
4)
Consult the dealer or an experienced radio/TV technician for additional suggestions.
INFORMATION TO USER
This device has been authorized as a radio frequency transmitter under the appropriate rules of the
Federal Communications Commission. Any changes or modifications not expressly approved by
Navini Networks could void the user’s authority to operate the equipment.
051123_pv1.3_Ripwave-MX Modem User Guide_40-00382-00b(prelim4.4.2)
Navini Networks, Inc.
Ripwave-MX Modem User Guide
INFORMATION REGARDING ANTENNAS
This device has three embedded antennas: one upright antenna with approximately 2 dBi gain and
two patch antennas, one on each side of the device. Each patch antenna has approximately 6 dBi
gain.
051123_pv1.3_Ripwave-MX Modem User Guide_40-00382-00b(prelim4.4.2)
Navini Networks, Inc.
Ripwave-MX Modem User Guide
Introduction
Congratulations! The Liquid Cystal Display Ripwave™-MX
(LMX) dual-mode Modem is a user-friendly, easy-to-install device
that helps you connect wirelessly to the Internet. It provides
complete broadband Internet access to residential and small
office/home office (SOHO) customers without the necessity of
professional hardware installation. The LMX Modem also provides
nomadic service availability as a computer with this device is
moved from room to room, location to location, or even city to city
as long as there is coverage in the area.
Package
Inventory
Please verify the contents of your LMX Modem package. If you do
not find all of these items in your package, notify the supplier from
whom you obtained it.
• LMX Modem
• LMX Modem AC power adapter
• PC-to-LMX Modem cable (Ethernet straight cable)
• Ripwave-MX Modem User Guide (on CD)
• Ripwave-MX Modem Quick Installation Guide
• Navini Diagnostics Installation CD
LMX Models
Your LMX Modem will operate in either the 2.4 GHz, 2.5-2.6
GHz, 3.4 GHz, or 3.5 GHz range. Within each frequency range
there are several model types, described on the next page.
2.4, 2.5-2.6, 3.4 & 3.5
GHz LMX Modem
051123_pv1.3_Ripwave-MX Modem User Guide_40-00382-00b(prelim4.4.2)
Navini Networks, Inc.
Ripwave-MX Modem User Guide
Operating
Frequencies
Modem
Model
Frequency Range
2.4 GHz
LMX
2.5 – 2.6
GHz LMX
3.4 GHz
LMX
3.5 GHz
LMX
2400-2483
LMX E
2.5-2.6 LMX
3410-3525
LMX E
3475-3600
LMX E
Operating
Band
2.400 GHz – 2.483 GHz
ISM
2.500 GHz – 2.686 GHz
MMDS/ITFS
3.410 GHz – 3.525 GHz
BWA/FWA
3.475 GHz – 3.600 GHz
BWA/FWA
The “E” in the model name stands for Ethernet. Your computer
should have this port for connecting the Modem.
•
Minimum
Computing
Requirements
(See, also, Addendum 1)
An Ethernet connection will function with any Win32®
Operating System (Windows® 95 or later).
Operating
System1:
CPU:
RAM:
Hard Drive:
Monitor:
Ethernet Modems: Any Win32 Operating System
(OS) - Windows 952, Windows NT, Windows 983,
Windows 98SE3, Windows 2000, Windows ME3,
Windows XP4, or later version.
General Information:
Ensure that the pc network port is enabled.
Pentium level or higher
32 MB or the Operating System minimum,
whichever is greater
50 MB free disk space for either monitoring
software (Navini Diagnostics Tool) 5
256 colors, 800 x 600 resolution
NOTE: To upgrade your Operating System after loading the Navini
Diagnostics software, you must first uninstall Navini Diagnostics prior to
upgrading the OS. Otherwise, Navini Diagnostics will not work. See Uninstall
instructions in this Guide.
NOTE: Internet Explorer 3.0 or higher is required for installation on Windows
95 Operating Systems.
NOTE: The LMX Modem must be left powered ON whenever you shut down
or restart any Windows 98 or ME platforms. If the Modem is off, a blue screen
appears on the monitor. In the event that happens you will most likely have to
power cycle the PC.
NOTE: Windows XP must be Service Pack Level 1 or higher.
NOTE: Navini Diagnostics software is supported on Win98, Win98SE,
Win2000, WinME, WinXP or higher, Mac X (also called Mac10) or higher, or
051123_pv1.3_Ripwave-MX Modem User Guide_40-00382-00b(prelim4.4.2)
Navini Networks, Inc.
Ripwave-MX Modem User Guide
Red Hat Linux 8.0 or higher. Mac users must have the Snuffit extraction
software.
This manual will guide you through the simple process of installing
the LMX Modem and software, which has been developed to
optimize the ease and convenience for you, our valued customer.
If you experience any difficulties with your unit, please contact
your Service Provider or the vendor from whom you obtained your
LMX Modem.
Physical
Characteristics
The following figure shows the physical characteristics of the
Ripwave-MX LMX Modems.
LMX Modems (2.4, 2.5-2.6, 3.4, & 3.5 GHz)
Antenna
Liquid Crystal
Crystal Display
On/Off Button
Front
Power Adapter Connection
Ethernet Cable Connection
Back
051123_pv1.3_Ripwave-MX Modem User Guide_40-00382-00b(prelim4.4.2)
Navini Networks, Inc.
Installing the
LMX Modem
(See, also, Addendum 1)
Ripwave-MX Modem User Guide
The following instructions are for the installation of the LMX
Modem. Please read all instructions before attempting the
installation. It is advisable to turn off the computer and the LMX
Modem before performing the installation.
Step Action
1.
Connect the Ethernet
cable to the Ethernet
port on the computer.
2.
Illustration
Connect the other end of
the Ethernet cable to the
LMX Modem.
Connection for
Ethernet cable
3.
Connect the AC power
adapter to the LMX
Modem. Plug the other
end into a 110/220 VAC
60/50 Hz outlet.
CAUTION! Only use
the AC power adapter
specifically supplied
with the LMX Modem.
Using any other adapter
may cause damage to
the Modem.
Connection for
Power Adapter
10
051123_pv1.3_Ripwave-MX Modem User Guide_40-00382-00b(prelim4.4.2)
Navini Networks, Inc.
Installing the LMX
Modem, continued
Ripwave-MX Modem User Guide
Step Action
4.
Rotate the antenna on
the LMX Modem
clockwise 180 degrees
to the UP position. This
reveals the LMX
Modem liquid crystal
display (LCD).
5.
Illustration
Antenna
Liquid Crystal
Display
CAUTION! Rotation or
movement of the
antenna in any other
direction may cause
damage to the LMX
Modem.
Turn the Modem ON by
pushing the On/Off
button in.
On/Off Button
6.
If the LCD turns on,
proceed to Step 7. If not,
there is a problem with
the Modem or the AC
power adapter. Check all
cables for proper
connection. If there is
still a problem, contact
the supplier who gave
you the package.
Liquid Crystal
Display (LCD)
11
051123_pv1.3_Ripwave-MX Modem User Guide_40-00382-00b(prelim4.4.2)
Navini Networks, Inc.
Ripwave-MX Modem User Guide
Installing the LMX
Modem, continued
Step Action
Turn your computer on
7.
and log in.
8.
Proceed to the
“Troubleshooting”
section of this manual.
Accessing the
Internet
With your Modem now installed, and both the Modem and
computer power on, you should be able to surf the Internet! To
access the Internet, open the web browser that is installed on your
computer.
Troubleshooting
After installation, if you are experiencing difficulties with your
Internet connection, please review the Minimum Computing
Requirements and Addendum 1 to ensure your computer meets
those requirements. Next, go back over the installation procedures
and ensure those steps were completed properly.
Illustration
Assuming the computer requirements are met and the installation
steps were completed as required, you will need to observe the
signal sync and signal strength indicators on the LMX Modem.
You also may need to install the monitoring software. This
software, called the Navini Diagnostics, is provided on a CD that
came in your Modem package. The Navini Diagnostics software
assists in solving connection problems as well as providing other
valuable information.
LCD Display
The LCD Display is a text-based display that provides valuable
information about the LMX Modem’s operation. Used in
conjunction with the monitoring software, you can troubleshoot
signal issues, network connections, and power problems.
CONNECTED
12
051123_pv1.3_Ripwave-MX Modem User Guide_40-00382-00b(prelim4.4.2)
Navini Networks, Inc.
LCD Display, continued
Ripwave-MX Modem User Guide
The following table provides definitions for the LCD indications.
LCD Indicator:
SEARCHING
Blinking flash: Syncing
CONNECTED: Locked-on
S: Signal Strength Meter (SSI)
0 bars
S<100
1 bar
-99
Programs > NavDiag >
Uninstall.
2.
3.
The Install-Anywhere
Uninstaller screen
appears. Click
Uninstall.
The screen will indicate
the application files are
uninstalled.
Illustration
Windows 2000 Screen
Windows 2000 Screen
Windows 2000 Screen
24
051123_pv1.3_Ripwave-MX Modem User Guide_40-00382-00b(prelim4.4.2)
Navini Networks, Inc.
Uninstalling Navini
Diagnostics (NavDiag),
continued
Ripwave-MX Modem User Guide
Step Action
4.
The Uninstall Complete
screen appears when
finished. Click on Quit
to close the Uninstall
screen.
5.
Optional
Batteries
Illustration
Windows 2000 Screen
Restart the PC to
complete the uninstall
process. This will ensure
the uninstall process
completes successfully.
The LMX Modems have two optional external battery packs
associated with them. These battery packs are the Standard
External Battery Pack (S-EBP) and the Heavy Duty-External
Battery Pack (HD-EBP). The Standard External Battery Pack (SEBP) provides approximately 16 Watt-Hours of power while the
Heavy Duty-External Battery Pack (HD-EBP) provides
approximately 44 Watt-Hours of power.
This section describes how to install and charge the optional
external battery packs.
Optional External
Battery Packs
The external batteries are not installed inside the Modem. Instead
they are connected to the Modem. Before we discuss how to
connect and charge the external battery packs, let’s discuss the
similarities and differences between the Standard External Battery
Pack (S-EBP) and the Heavy Duty External Battery Pack (HDEBP).
Both the S-EBP and HD-EBP can be used with any of the
LMX Modems.
The HD-EBP provides 44 Watt-Hours of power while the SEBP provides 16 Watt-Hours of power.
25
051123_pv1.3_Ripwave-MX Modem User Guide_40-00382-00b(prelim4.4.2)
Navini Networks, Inc.
Optional External Battery
Packs, continued
Ripwave-MX Modem User Guide
The amount of time the S-EBP and HD-EBP can operate before
recharging varies. This time is dependent of the usage run on
the LMX Modem. The following table shows example
approximations for how long the batteries can run before a
recharge is required.
Usage
Approximate hours of Usage Before
Recharge Required
S-EBP
HD-EBP
Up to 2.5
Up to 8
1.2
Approximately 4
Up to 1
Up to 3
Standard
Moderate
Heavy
Connecting the
Standard External
Battery Pack (SEBP)
To connect the S-EBP to any of the LMX Modems, plug the
battery’s pig-tail cord into the input socket located on the back of
the Modem.
26
051123_pv1.3_Ripwave-MX Modem User Guide_40-00382-00b(prelim4.4.2)
Navini Networks, Inc.
Ripwave-MX Modem User Guide
The Indicator Light
on the Standard
External Battery
Pack (S-EBP)
The S-EBP has one indicator light that resides on top of the unit.
This light has four states associated with it. The states are
described below.
Charging the
Standard External
Battery Pack (SEBP)
The S-EBP will need to be recharged when the battery is connected
to a Modem and the Modem is turned on but the LED on top of the
battery remains off (indicating the battery has no power) or is red
(indicating the battery level is low).
Light is off when any of the following apply:
• The battery is not connected to a Modem or to the battery
charger
• The battery is connected to a Modem but the Modem is off
• The battery is connected to a Modem and the Modem is on
but the battery power is depleted
Light is green when the battery is on and fully charged.
Light is amber when the battery has power but is no longer
fully charged. If the battery is connected to the battery charger,
an amber light means the battery is being charged.
Light is red when the battery is low on power. When the
battery is low, it has approximately 15% of its charge left.
To recharge the S-EBP, use only the 12V charger that came with
the S-EBP. Using any other charger may damage the battery. To
charge the S-EBP, plug the 12V adapter into the 12V input socket
on the S-EBP.
NOTE: The battery may charge while it is connected to a Modem.
NOTE: Do not attempt to plug the 12V adapter into the Modem as
this may harm the Modem.
27
051123_pv1.3_Ripwave-MX Modem User Guide_40-00382-00b(prelim4.4.2)
Navini Networks, Inc.
Connecting and
Disconnecting the
Heavy Duty
External Battery
Pack (HD-EBP)
Ripwave-MX Modem User Guide
If you have a HD-EBP, the battery pack is installed in the bottom
of the LMX Modem. To install and or remove the battery pack,
follow the steps based on your model of Modem.
Step Action
1.
Depress the front button
on the HD-EBP so that
the front prong moves in
towards the center of the
HD-EBP.
2.
Illustration
Place the back slot of
the LMX Modem over
the back prong of the
HD-EBP.
Front slot
Front prong
Front
button
3.
4.
5.
Place the front part of
the opening on the LMX
Modem over the front
prong on the battery.
Release the button on
the battery.
Press firmly down on
the Modem so that the
Modem firmly connects
with the HD-EBP.
28
051123_pv1.3_Ripwave-MX Modem User Guide_40-00382-00b(prelim4.4.2)
Back sl
slot
ot
Back prong
Navini Networks, Inc.
Connecting and
Disconnecting the HDEBP, continued
Ripwave-MX Modem User Guide
Step Action
6.
Plug the HD-EBP’s pigtail cord into the power
slot on the Modem.
7.
The Indicator Light
on the Heavy Duty
External Battery
Pack (HD-EBP)
Illustration
To remove the battery
pack from the Modem,
unplug the pig-tail cord.
Depress the front button
on the HD-EBP. Lift the
Modem off of the
battery pack.
The HD-EBP has one indicator light that resides on the back end of
the unit near the pig-tail cord. This light has four states associated
with it. The states are described below.
Light is off when any of the following apply:
• The battery is not connected to a Modem or to the battery
charger
• The battery is connected to a Modem but the Modem is off
• The battery is connected to a Modem and the Modem is on
but the battery is empty of power
Light is green when the battery is on and fully charged.
Light is amber when the battery has power but is no longer
fully charged. If the battery is connected to the battery charger,
an amber light means the battery is being charged.
Light is red when the battery is low on power. When the
battery is low, it has approximately 15% of its charge left.
29
051123_pv1.3_Ripwave-MX Modem User Guide_40-00382-00b(prelim4.4.2)
Navini Networks, Inc.
Charging the
Heavy Duty
External Battery
Pack (HD-EBP)
Ripwave-MX Modem User Guide
The HD-EBP will need to be recharged when the battery is
connected to a Modem and the Modem is turned on but the LED on
the back of the battery remains off (indicating the battery has no
power) or is red (indicating the battery level is low).
To recharge the HD-EBP, use only the 12V charger that came with
the HD-EBP. Using any other charger may damage the battery.
To charge the HD-EBP:
Plug the 12V adapter into the 12V input socket on the HDEBP.
Plug the other end of the adapter into an electrical wall socket.
Pig-tail Cord
Plugs into
Wall Socket
12V Input Socket
NOTE: Do not attempt to plug the 12V adapter into the Modem as
this may harm the Modem.
NOTE: The battery may charge while it is connected to a Modem.
Care &
Maintenance
The LMX Modem is designed to give years of trouble-free service.
To ensure operation, read the following care and maintenance
instructions.
Keep the Modem free of dust and moisture. If the Modem gets
wet, use a towel to dry it immediately.
Handle the Modem gently. Dropping it or mishandling it can
cause damage to the plastic shell or the electronic circuitry.
Keep the Modem away from high temperatures. Heat can cause
damage to the plastic shell or the electronic circuitry.
30
051123_pv1.3_Ripwave-MX Modem User Guide_40-00382-00b(prelim4.4.2)
Navini Networks, Inc.
Care & Maintenance,
continued
Ripwave-MX Modem User Guide
Use only a mild detergent and a soft, damp cloth to clean the
Modem. Do not use any chemicals or abrasives to clean the
plastic shell.
If there is a problem with the Modem, do not attempt to repair
it yourself. Report the problem to your Service Provider.
If you are going to upgrade your Operating System after
loading the Navini monitoring software (Navini Diagnostics),
you must first uninstall the monitoring software prior to
upgrading the OS. Otherwise, the monitoring software will not
work. See Uninstall instructions in this Guide.
The LMX Modem must be left powered ON whenever you shut
down or restart any Windows 98 or ME platforms. If the
Modem is off, a blue screen appears on the monitor. In the
event this happens you will mostly likely have to power cycle
the PC.
Upgrading the
Modem
There are three different ways to upgrade the software that makes
the Modem work.
Your Service Provider may perform an over-the-air (OTA)
upgrade, where the up-to-date software files are transferred
wirelessly from the Base Station to your Modem.
Your Service Provider may provide a downloadable web file or
CD-ROM with software to be installed on your PC and used to
upgrade the Modem. This method is used for systems that have
a software release prior to 4.0.
Your Service Provider may instruct you to use your Navini
Diagnostics Tool to upgrade your Modem software load. This
method is used for systems that have a software release of 4.0
or greater.
The latter two methods are used only if the Modem was not
powered on during the OTA upgrade process. The OTA upgrade is
normally transparent to the user; in other words, there should be no
noticeable service interruption. The web or CD upgrade comes
with instructions and takes a minimal amount of time to complete.
Note: If you use the Navini Diagnostics Tool to upgrade your
Modem software load, the computer connected to your Modem
31
051123_pv1.3_Ripwave-MX Modem User Guide_40-00382-00b(prelim4.4.2)
Navini Networks, Inc.
Ripwave-MX Modem User Guide
must already have an IP address. If your computer does not have an
IP address, contact your Service Provider. If you attempt to
upgrade your Modem software through the Navini Diagnostics
Tool and the computer does not have an assigned IP address, you
may see one of the following error messages:
32
051123_pv1.3_Ripwave-MX Modem User Guide_40-00382-00b(prelim4.4.2)
Navini Networks, Inc.
Ripwave-MX Modem User Guide
ADDENDUM 1: Ripwave™-MX Modem - PC Troubleshooting
- For Use With All Ripwave-MX LMX Modems and Navini Diagnostics Software PC Operating Systems
Prior to installing the Navini Diagnostics software, please check to insure that the PC Operating System
meets the criteria given in the table below. If these criteria are not met, unpredictable problems may
occur as a result of installation. It is recommended that the user have the latest Windowsc updates
installed prior to installing the Navini Diagnostics software.
Operating System
Win95
Win98
Win98, 2nd ed.
WinME
Win 2000
Win NT 3.0/4.0
Win XP
Ethernet interface
Supported
Supported
Supported
Supported
Supported
Supported
Supported
Notes
1, 2
1, 2
Note 1: Internet Explorer 3.0 or higher is required
Note 2: Requires Service Pack 1
Note 3: To load the Navini Diagnostics software, the user MUST have Administrative privileges.
Ethernet Interface
The Ethernet Modem may be connected to a PC via an Ethernet connection. Also, it is possible to
connect multiple PC devices to a single Modem. The multi-PC configuration is transparent to the PC
users and is analogous to a multi-PC configuration on a normal Ethernet LAN. Check with your Service
Provider if multiple IP addressing is required for your particular configuration. The distinct advantage of
the Ethernet Modem is that it connects to any device that has an Ethernet interface. This makes it ideal
for small businesses that have a mix of devices, such as Unix machines, Apple Computers, etc. IP
addresses can be assigned to the devices dynamically via a DHCP server, or as Fixed IP assignments, or
Point-to-Point Protocol Over Ethernet (PPPoE).
Multiple Interface Environments
When a PC has an internal interface (for example, a Wireless Ethernet interface) in addition to the LMX
Modem, you should do the following:
•
•
If the wireless connection is not required, disable the internal wireless connection
If the built-in wireless connection is required for local networking and wireline Ethernet is used via
the LMX Modem for Internet connection, change the interface metric configuration so that the
wireline interface’s default gateway is used. (See your Operating System’s User Guide.)
33
051123_pv1.2_Ripwave-MX Modem User Guide_40-00382-00b(prelim4.4.2)
33
Navini Networks, Inc.
Ripwave-MX Modem User Guide
Routers
Neither the Navini LMX Monitor nor the Navini Diagnostics software will work if it goes through a
router.
Configuration Options
Host computer used
as a router to network
(USB or Ethernet)
Modem providing
access to the Internet
Internet
via an Ethernet
Ethernet hub
Modem connected
to a single computer
(Ethernet)
Results of Correct Navini Diagnostics Installation
Experienced PC users can check the results of the Navini Diagnostics installation by looking at
the log file that is created during the installation process. The log file is named
“Navini_Diagnostics_InstallLog.log.” It is located under c:\Program Files\Navini
Diagnostics.
------Install Begin: Tue Jul 20 12:15:22 CDT 2004
Install End: Tue Jul 20 12:15:30 CDT 2004
Created with Zero G's InstallAnywhere 4.5.3 Enterprise Build 1394
Summary
------Installation: Successful with warnings.
2 SUCCESSES
1 WARNINGS
0 NONFATAL ERRORS
0 FATAL ERRORS
34
051123_pv1.2_Ripwave-MX Modem User Guide_40-00382-00b(prelim4.4.2)
34
Navini Networks, Inc.
Ripwave-MX Modem User Guide
Action Notes:
None.
Install Log Detail:
Check Disk Space:
C:\Program Files\NavDiag
Status: SUCCESSFUL
Additional Notes: NOTE - Required Disk Space: 29,363,315; Free Disk Space: 30,806,179,840
Install Directory:
C:\Program Files\NavDiag\
Status: SUCCESSFUL
Get Registry Entry:
Key: HKEY_LOCAL_MACHINE\SOFTWARE\Navini Networks\NavDiag, ValueName:
InstallDirectory
Status: WARNING
Additional Notes: WARNING - Win32Exception
Make Registry Entry:
Key: HKEY_LOCAL_MACHINE\SOFTWARE\Navini Networks, Value Name: , Value Data:
Status: SUCCESSFUL
Make Registry Entry:
Key: HKEY_LOCAL_MACHINE\SOFTWARE\Navini Networks\NavDiag, Value Name: , Value
Data:
Status: SUCCESSFUL
Make Registry Entry:
Key: HKEY_LOCAL_MACHINE\SOFTWARE\Navini Networks\NavDiag, Value Name:
InstallDirectory, Value Data: C:\Program Files\NavDiag
Status: SUCCESSFUL
Install Directory:
C:\Program Files\NavDiag\Uninstall\
Status: SUCCESSFUL
Install Uninstaller:
Navini Diagnostics (Install All Uninstaller Components)
Status: SUCCESSFUL
Install Directory:
C:\Program Files\NavDiag\jre
Status: SUCCESSFUL
Install File:
C:\Program Files\NavDiag\Uninstall\Uninstall NavDiag.exe
Status: SUCCESSFUL
Install File:
C:\Program Files\NavDiag\Uninstall\Uninstall NavDiag.lax
Status: SUCCESSFUL
Install Directory:
C:\Program Files\NavDiag\Uninstall\resource\
Status: SUCCESSFUL
Install File:
C:\Program Files\NavDiag\Uninstall\resource\iawin32.dll
Status: SUCCESSFUL
Install File:
C:\Program Files\NavDiag\Uninstall\resource\remove.exe
Status: SUCCESSFUL
35
051123_pv1.2_Ripwave-MX Modem User Guide_40-00382-00b(prelim4.4.2)
35
Navini Networks, Inc.
Ripwave-MX Modem User Guide
Make Registry Entry:
Key:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\Navini Diagnostics, Value Name:
DisplayName, Value Data: Navini Diagnostics
Status: SUCCESSFUL
Make Registry Entry:
Key:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\Navini Diagnostics, Value Name:
UninstallString, Value Data: "C:\Program Files\NavDiag\Uninstall\Uninstall NavDiag.exe"
Status: SUCCESSFUL
Install Uninstaller:
Navini Diagnostics (Install All Uninstaller Components)
Status: SUCCESSFUL
Create LaunchAnywhere: Navini Diagnostics.exe (Install All LaunchAnywhere Java Executable Components)
Status: SUCCESSFUL
Install File:
C:\Program Files\NavDiag\Navini Diagnostics.exe
Status: SUCCESSFUL
Install File:
C:\Program Files\NavDiag\Navini Diagnostics.lax
Status: SUCCESSFUL
Create LaunchAnywhere: Navini Diagnostics.exe (Install All LaunchAnywhere Java Executable Components)
Status: SUCCESSFUL
Install Directory:
C:\Program Files\NavDiag\data\
Status: SUCCESSFUL
Install Directory:
C:\Program Files\NavDiag\data\images\
Status: SUCCESSFUL
Install File:
C:\Program Files\NavDiag\data\images\billboard.gif
Status: SUCCESSFUL
Install File:
C:\Program Files\NavDiag\data\images\splash.gif
Status: SUCCESSFUL
Install File:
C:\Program Files\NavDiag\data\images\buttonbar.gif
Status: SUCCESSFUL
Install File:
C:\Program Files\NavDiag\data\images\about2.gif
Status: SUCCESSFUL
Install File:
C:\Program Files\NavDiag\data\images\about1.gif
Status: SUCCESSFUL
Install File:
C:\Program Files\NavDiag\data\images\about.gif
Status: SUCCESSFUL
Install File:
C:\Program Files\NavDiag\data\images\uninstall.gif
Status: SUCCESSFUL
Install Directory:
C:\Program Files\NavDiag\data\log\
Status: SUCCESSFUL
36
051123_pv1.2_Ripwave-MX Modem User Guide_40-00382-00b(prelim4.4.2)
36
Navini Networks, Inc.
Ripwave-MX Modem User Guide
Install Directory:
C:\Program Files\NavDiag\data\lib\
Status: SUCCESSFUL
Install File:
C:\Program Files\NavDiag\data\lib\ctl.jar
Status: SUCCESSFUL
Install File:
C:\Program Files\NavDiag\data\lib\navDiag.jar
Status: SUCCESSFUL
Install File:
C:\Program Files\NavDiag\data\lib\jfreechart-0.9.13.jar
Status: SUCCESSFUL
Install File:
C:\Program Files\NavDiag\data\lib\jcommon-0.8.8.jar
Status: SUCCESSFUL
Install File:
C:\Program Files\NavDiag\data\lib\log4j.jar
Status: SUCCESSFUL
Install Directory:
C:\Program Files\NavDiag\data\doc\
Status: SUCCESSFUL
Install Directory:
C:\Program Files\NavDiag\config\
Status: SUCCESSFUL
Install File:
C:\Program Files\NavDiag\config\NavDiag.lcf
Status: SUCCESSFUL
Install Directory:
C:\Documents and Settings\luis\Start Menu\Programs\NavDiag\
Status: SUCCESSFUL
Create Shortcut:
C:\Documents and Settings\luis\Start Menu\Programs\NavDiag\Navini Diagnostics.lnk
Status: SUCCESSFUL
Create Shortcut:
C:\Documents and Settings\luis\Start Menu\Programs\NavDiag\Uninstall.lnk
Status: SUCCESSFUL
Install Directory:
C:\Documents and Settings\luis\Desktop\
Status: SUCCESSFUL
Additional Notes: NOTE - Directory already existed
Create Shortcut:
C:\Documents and Settings\luis\Desktop\Navini Diagnostics.lnk
Status: SUCCESSFUL
37
051123_pv1.2_Ripwave-MX Modem User Guide_40-00382-00b(prelim4.4.2)
37
Navini Networks, Inc.
Ripwave-MX Modem User Guide
ADDENDUM 2: End User Software License Agreement
between
Navini Networks, Inc.
and
Buyer
ARTICLE 1
IMPORTANT MESSAGE
1.1
Act of Assent. Installing the Software indicates that you have read, understand and accept this
License Agreement.
ARTICLE 2
LICENSES
2.1
2.2
2.3
2.4
Grant of License. The Software and related Documentation, are the intellectual property of Navini
Networks, Inc. and are protected by law. Navini Networks, Inc. grants to Buyer a personal,
nonexclusive, nontransferable worldwide license, for revocable use (as permitted herein) of the
Software based on the terms and conditions of this License Agreement and the Master Supply
Agreement to which it is attached. Buyer is permitted to install and use the Software on its
server, but only in conjunction with the Navini Hardware. Buyer is not permitted to rent, sell or
otherwise transfer the Software to any third parties.
Ownership Rights. Under this Agreement, Buyer does not acquire any rights of ownership in the
Software and related Documentation and subsequent releases and versions licensed by Navini
Networks, Inc. to Buyer pursuant to this License Agreement, whether in printed or machinereadable format. Buyer acquires only the right to use the Software and related Documentation
subject to the terms and conditions of this Agreement. Buyer promises to keep the Software in
confidence for the benefit of Navini Networks, Inc. and agrees to destroy or return the Software
and all copies at such time as Buyer chooses to cease using the Software or upon termination or
cancellation of this License Agreement for any reason.
Backup Copies. Buyer may copy the Software for safekeeping (archival) or backup purposes,
provided that all such copies of the Software are subject to the provisions of this License
Agreement, and also provided that each copy shall include in readable format any and all
confidential, proprietary, and copyright notices or markings contained in the original.
Assignment. The rights granted in this License Agreement are restricted for use solely by Buyer
and may not be assigned, transferred, or sublicensed, however Buyer may grant access to its
server to End-Users. Each Buyer shall be authorized to make use of the Software in the form in
which it is provided to Buyer solely for Buyer’s own computer server location. Buyer represents
that it will not use the Software for any purpose that is not expressly delineated in this
Agreement. Further Buyer represents that it will comply with all export, re-export, and other
laws in its use of the Software.
38
051123_pv1.2_Ripwave-MX Modem User Guide_40-00382-00b(prelim4.4.2)
38
Navini Networks, Inc.
Ripwave-MX Modem User Guide
2.5
Suitability.
a.
Buyer alone is responsible for determining which software best suits Buyer’s needs, for
installing and operating the Software, and for the results obtained. Accordingly, each
Buyer should determine its needs, and evaluate the Software’s capabilities before making
a final decision about licensing the software.
b.
Navini Networks, Inc. makes no representation that the Software conforms to or satisfies
any federal, state, or local laws. Buyer is encouraged to engage professional assistance
from attorneys and engineers to evaluate the suitability of the Software for Buyer’s use.
c.
Navini Networks, Inc. makes no claims that the Software is suitable for Buyer’s intended
purposes.
2.6
Remote Digital Access. Navini Networks, Inc. reserves the right, but is not obligated to digitally
access the Software for the purposes of upgrading and maintaining the Software.
U.S. GOVERNMENT RESTRICTED RIGHTS. All Software provided to the U.S. Government
pursuant to solicitations issued on or after December 1, 1995 is provided with the commercial
license rights and restrictions described elsewhere herein. All Software provided to the U.S.
Government pursuant to solicitations issued prior to December 1, 1995 is provided with
“Restricted Rights” as provided for in FAR, 48 CFR 52.227-14 (June 1987) or DFAR, 48 CFR
252.227-7013 (Oct 1988), as applicable
2.7
ARTICLE 3
TRADE SECRETS
3.1
3.2
Trade Secret. Navini Networks, Inc. considers the licensed Software covered by this License
Agreement to be a trade secret. Navini Networks, Inc. does not disclose any information to
Navini Networks, Inc. competitors or potential competitors. Buyer shall not disclose any design,
code, or technological know-how gained by access to the Software to Licensor’s competitors.
Buyer shall not use design, code, or documentation gained by access to the Software to develop a
similar technology or a competing software product. To attempt to or to do so, the Parties
acknowledge, understand and agree, constitute a material breach of this License Agreement.
Third Party Intellectual Property. Buyer acknowledges, understands and agrees that the licensed
Software covered by this License Agreement may contain Intellectual Property owned by Third
Parties and duly licensed to Navini Networks, Inc. Copyright, Patent and other laws protect Third
Party Intellectual Property manufactured with, marketed with, or otherwise bundled with the
licensed Software. Buyer promises to keep such Third Party Intellectual Property in confidence
to the benefit of the Third Party, agrees not to reverse engineer or otherwise decompile Third
Party Intellectual Property, and agrees to stop using, destroy and/or return such Third Party
owned Intellectual Property under the same terms and conditions as the licensed Software as set
forth in this License Agreement.
39
051123_pv1.2_Ripwave-MX Modem User Guide_40-00382-00b(prelim4.4.2)
39
Navini Networks, Inc.
Ripwave-MX Modem User Guide
ARTICLE 4
INDEMNIFICATIONS AND WARRANTY
4.1
4.2
Intellectual Property Indemnification; Entire Liability. ARTICLE 15 OF THE SUPPLY
AGREEMENT TO WHICH THIS AGREEMENT IS ATTACHED STATES THE ENTIRE
LIABILITY OF NAVINI NETWORKS, INC. WITH RESPECT TO INFRINGEMENT OF
COPYRIGHTS, TRADE SECRETS, TRADEMARKS, PATENTS, AND OTHER
INTELLECTUAL PROPERTY RIGHTS BY THE LICENSED SOFTWARE,
DOCUMENTATION, OR ANY PARTS THEREOF, AND NAVINI NETWORKS, INC.
SHALL HAVE NO ADDITIONAL LIABILITY WITH RESPECT TO ANY ALLEGED OR
PROVEN INFRINGEMENT.
Warranty. EXCEPT AS GRANTED IN THE BODY OF THE SUPPLY AGREEMENT TO
WHICH THIS LICENSE AGREEMENT IS ATTACHED, THE LICENSED SOFTWARE IS
PROVIDED BY NAVINI NETWORKS, INC. “AS IS” AND WITHOUT WARRANTY OF
ANY KIND OR NATURE, WRITTEN OR ORAL, EXPRESS OR IMPLIED, INCLUDING
(WITHOUT LIMITATION) THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE. THIS LIMITATION OF WARRANTIES WAS A
MATERIAL FACTOR IN THE ESTABLISHMENT OF THE LICENSE FEE CHARGED FOR
EACH SPECIFIC ITEM OF SOFTWARE LICENSED.
ARTICLE 5
LIMITATION OF LIABILITY
5.1
5.2
5.3
Consequential Damages. TO THE MAXIMUM EXTENT PERMITTED BY THE APPLICABLE
LAW, IN NO EVENT SHALL NAVINI NETWORKS, INC. OR ANY THIRD PARTY
INVOLVED IN THE CREATION, PRODUCTION, DELIVERY, OR LICENSING OF THE
SOFTWARE BE LIABLE FOR ANY LOST REVENUES, PROFITS OR DATA OR OTHER
SPECIAL, INDIRECT, INCIDENTAL, CONSEQUENTIAL, OR PUNITIVE DAMAGES,
HOWEVER CAUSED AND REGARDLESS OF THEORY OF LIABILITY, EVEN IF NAVINI
NETWORKS, INC. HAS, OR SHOULD HAVE HAD ANY KNOWLEDGE, ACTUAL OR
CONSTRUCTIVE, OF THE POSSIBILITY OF SUCH DAMAGES.
License-Fee Limitation. Except for the indemnification provisions of Article 15, Navini
Networks, Inc.’s maximum liability for damages is limited to the license fees paid by Buyer under
this Agreement for the particular licensed Software that caused the damages.
Loss of Data. Software error can cause a significant loss of data. Navini Networks, Inc. shall not
be responsible for any loss of data. Navini Networks, Inc.’s responsibility is to correct the
Software error as provided in this License Agreement or the Supply Agreement to which it is
attached. It is Licensee’s responsibility to have adequate backup procedures to protect Buyer
from significant loss of valid data.
40
051123_pv1.2_Ripwave-MX Modem User Guide_40-00382-00b(prelim4.4.2)
40
Navini Networks, Inc.
Ripwave-MX Modem User Guide
ARTICLE 6
OBJECT CODE ONLY-NO MODIFICATIONS
6.1
6.2
6.3
Modifications. In order to maintain the “trade secret” status of the information contained in the
Licensed Software, Navini Networks, Inc. provides the Software in object-code form only. Buyer
shall not modify, enhance, adapt, disassemble, translate, decompile or otherwise decode any
portion of the object code of the Software module. Buyer shall not use the Software without a
license to the Software object code. The object code contains the license number, date of license,
and other license information. This information is placed in the object-code portions to prevent
unauthorized and unlicensed distributions of the Software. Buyer shall not subvert or change any
of this information. Further Buyer shall not make, full or partial, copies of any documentation
whether printed or machine- readable media supplied with the Licensed Software unless
expressly granted prior written permission by Navini Networks, Inc.
Responsibility for Damages. Buyer is subject to the provisions of the Supply Agreement with
respect to the Software (including Section 16). Buyer is fully liable and responsible for any
damages, indirect or direct, and costs that Navini Networks, Inc. may incur if Buyer appoints a
subcontractor who accesses the Software without Navini’s prior written consent. Buyer shall
defend, indemnify, and hold Navini Networks, Inc., its directors, officers, employees, agents,
Authorized Partners, and other representatives harmless accordingly for all costs and direct and
indirect damages sustained by Navini Networks, Inc. However, if the subcontractor is preapproved by Navini in writing for access to the Software, then this Section shall not apply.
Copyright Notices. Buyer shall not remove any copyright or proprietary rights notice or
identification that indicates Navini Networks, Inc. ownership from any part of the licensed
Software, it being expressly understood and agreed that the existence of such copyright notice
should not be construed as an admission or presumption that publication of the licensed Software
has occurred.
END OF AGREEMENT
Copyright © 2001-2005 Navini Networks, Inc.
All rights reserved. Printed in the USA.
Navini Networks is a registered trademark. Zero-Install, Ripwave, and Unwired by Navini are
trademarks of Navini Networks, Inc. Other product and company names mentioned herein may be
trademarks and/or service marks of their respective owners. Rev. 052302
41
051123_pv1.2_Ripwave-MX Modem User Guide_40-00382-00b(prelim4.4.2)
41
Source Exif Data: 
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Extract
Page Count                      : 41
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:908b7364-0ad0-45af-984e-48655fd24830
Producer                        : Acrobat Distiller 6.0 (Windows)
Comments                        : Commercial Release 4.1.6
Category                        : Modem
Company                         : Navini Networks
Manager                         : Sharon Redfoot
Source Modified                 : D:20051116231445
Headline                        : modem
Create Date                     : 2005:11:18 09:47:12-06:00
Creator Tool                    : Acrobat PDFMaker 6.0 for Word
Modify Date                     : 2005:11:28 10:38:28-06:00
Metadata Date                   : 2005:11:28 10:38:28-06:00
Document ID                     : uuid:c990e2a9-b30b-4850-ae7c-2b96ed95aba5
Version ID                      : 6
Format                          : application/pdf
Title                           : Ripwave Modem User Guide
Creator                         : M. Cox
Description                     : modem
Subject                         : end-user; Ripwave; modem; cpe; unit; pc; IAD
Tagged PDF                      : Yes
Author                          : M. Cox
Keywords                        : end-user;, Ripwave;, modem;, cpe;, unit;, pc;, IAD
EXIF Metadata provided by EXIF.tools
FCC ID Filing: PL6-2400-MDM08-C2

Navigation menu