Cisco Systems 2500-MDM17-C2 LMX Modem User Manual Ripwave Modem User Guide

Cisco Systems, Inc LMX Modem Ripwave Modem User Guide

User guide

R
Ri
ip
pw
wa
av
ve
e
-
-M
MX
X
M
Mo
od
de
em
m
U
Us
se
er
r
G
Gu
ui
id
de
e
For use with all Ripwave-MX Modem models
Part Number 40-00097-00
Revision J, Version 1.0, PV1.5
August 1, 2005
Proprietary
All information disclosed by this document is the proprietary property of Navini Networks, Inc. and is protected
by copyright, trademark, and/or trade secret laws. All rights therein are expressly reserved.
Navini Networks, Inc. Ripwave-MX Modem User Guide
TABLE OF CONTENTS
PERMISSIONS, TRADEMARKS & DISTRIBUTION.............................................................................3
SAFETY .......................................................................................................................................................4
REGULATORY INFORMATION ..............................................................................................................5
BATTERY PRECAUTIONS........................................................................................................................6
INTRODUCTION.......................................................................................................................................7
PACKAGE INVENTORY.........................................................................................................................7
RIPWAVE-MX MODELS.........................................................................................................................7
OPERATING FREQUENCIES .........................................................................................................................8
MINIMUM COMPUTING REQUIREMENTS......................................................................................8
PHYSICAL CHARACTERISTICS..........................................................................................................9
INSTALLING THE LMX MODEM ......................................................................................................10
ACCESSING THE INTERNET..............................................................................................................12
TROUBLESHOOTING...........................................................................................................................12
LCD DISPLAY..........................................................................................................................................12
INSTALLING NAVINI DIAGNOSTICS (NAVDIAG)........................................................................14
TROUBLESHOOTING USING NAVINI DIAGNOSTICS (NAVDIAG)..........................................17
UNINSTALLING NAVINI DIAGNOSTICS (NAVDIAG) ..................................................................23
OPTIONAL BATTERIES .......................................................................................................................24
OPTIONAL EXTERNAL BATTERY PACKS...................................................................................................24
CONNECTING THE STANDARD EXTERNAL BATTERY PACK (S-EBP)........................................................25
THE INDICATOR LIGHT ON THE STANDARD EXTERNAL BATTERY PACK (S-EBP)....................................26
CHARGING THE STANDARD EXTERNAL BATTERY PACK (S-EBP)............................................................26
CONNECTING AND DISCONNECTING THE HEAVY DUTY EXTERNAL BATTERY PACK (HD-EBP).............27
THE INDICATOR LIGHT ON THE HEAVY DUTY EXTERNAL BATTERY PACK (HD-EBP) ............................28
CHARGING THE HEAVY DUTY EXTERNAL BATTERY PACK (HD-EBP) ....................................................29
CARE & MAINTENANCE .....................................................................................................................29
UPGRADING THE MODEM .................................................................................................................30
ADDENDUM 1: RIPWAVE-MX MODEM - PC TROUBLESHOOTING....................................32
ADDENDUM 2: END USER SOFTWARE LICENSE AGREEMENT.............................................37
2
050801_pv1.5_Ripwave-MX Modem User Guide_40-00097-00j(4.3.1)
Navini Networks, Inc. Ripwave-MX Modem User Guide
Permissions, Trademarks & Distribution
Na
Un
co
Copyright© 2001 - 2005, Navini Networks, Inc. All information contained herein and disclosed by this
document is confidential and the proprietary property of Navini Networks, Inc. and all rights therein are
expressly reserved. Acceptance of this material signifies agreement by the recipient that the information
contained in this document is confidential and that it will be used solely for the purposes set forth herein.
Acceptance of this material signifies agreement by the recipient that it will not be used, reproduced in
whole or in part, disclosed, distributed, or conveyed to others in any manner or by any means – graphic,
electronic, or mechanical, including photocopying, recording, taping, or information storage and retrieval
systems – without the express written permission of Navini Networks, Inc.
vini Networks is a registered trademark. The Navini Networks logo, Zero-Install, Ripwave, and
wired by Navini are trademarks of Navini Networks, Inc. Other product and company names
mentioned herein may be trademarks and/or service marks of their respective owners.
Except for the hardware warranty, nothing herein constitutes any representation, warranty,
assurance, or guaranty of any kind.
Because of continuing developments and improvements in design, manufacturing, and deployment,
material in this document is subject to change without notification and does not represent any
mmitment or obligation on the part of Navini Networks, Inc.
Navini Networks, Inc. shall have no liability for any error or damages resulting from the use of this
document.
All Navini Networks logos and trademarks are the property of Navini Networks, Inc. Unauthorized usage
is strictly prohibited without the express written permission of Navini Networks, Inc.
© 2001 - 2005 Navini Networks, Inc. All rights reserved.
3
050801_pv1.5_Ripwave-MX Modem User Guide_40-00097-00j(4.3.1)
Navini Networks, Inc. Ripwave-MX Modem User Guide
Safety
When using Navini Ripwave electronic equipment, always follow basic safety precautions to reduce the
risk of electrical shock, fire, and injury to people and/or property. Follow all warnings and instructions
that come with the equipment.
1. Do not use the equipment while you are in a bathtub, shower, pool, or spa. Exposure of the
equipment to water could cause severe electrical shock or serious damage to the equipment.
2. Do not immerse the equipment in any type of liquid. Use a damp clothe and if needed, water and a
mild detergent to clean the plastic shell. Unplug the equipment from the
power source before
cleaning.
0
source may cause
damage to the equipment.
e with
r manual.
. Do not use a frayed or damaged power cord. Do not place the power cord where it can be stepped on
. Do not overload wall outlets, power strips, or extension cords. This can cause serious electrical shock
lace the equipment on an unstable surface. It can fall and cause injury or damage to the
equipment.
trical shock. Only
an authorized repair technician should service this product.
1. Do not expose the equipment to extreme hot or cold temperatures.
2. Do not use the equipment under the following conditions:
When the equipment has been exposed to water or moisture.
When the equipment has been damaged.
When the power cord is damaged or frayed.
ance.
3. Follow all airport and FAA regulations when using the equipment on or near aircraft.
4. Only operate the equipment from the type of power source(s) indicated in this manual (110/22
VAC, 60/50 Hz adapter or Navini supplied battery). Any other type of input power
5. Power the equipment using only the battery or the AC adapter cable provided, and in accordanc
the instructions specified in the use
6
or tripped over.
7. Do not touch wires where the insulation is frayed or worn unless the equipment has been
disconnected from its power source.
8
or fire.
9. Do not p
10. Do not disassemble the equipment. Removing covers exposes dangerous voltages or other risks and
also voids the warranty. Incorrect reassembly can cause equipment damage or elec
1
1
When the equipment does not operate properly or shows a distinct change in perform
4
050801_pv1.5_Ripwave-MX Modem User Guide_40-00097-00j(4.3.1)
Navini Networks, Inc. Ripwave-MX Modem User Guide
Regulatory Information
is a Radio Frequency transmitter. It is required to comply with FCC RF
mount
aintained,
ditions:
ff and on, the user is encouraged
ing measures:
e equipment and the receiver,
a circuit that is different from the one to which the
4) Consult the dealer or an experienced radio/TV technician for additional suggestions.
INFORMATION TO USER
This device has been authorized as a radio frequency transmitter under the appropriate rules of the
Federal Communications Commission. Any changes or modifications not expressly approved by
Navini Networks could void the user’s authority to operate the equipment.
FCC Notice
CAUTION: This device
exposure requirements for transmitting devices. For all LMX Modems except for the 2.6 LMX
with window mount, a minimum separation distance of 8 inches (20 cm) or more must be
maintained between the antenna and all persons during device operations to ensure compliance
with the FCC’s rules for Radio Frequency Exposure. For the 2.6 LMX Modem with a window
mount, a minimum of 8.3 inches (21 cm) or more must be maintained between the window
antenna and all persons during device operations. If this minimum distance cannot be m
exposure to RF levels that exceed the FCC’s limits may result.
FCC Compliance and Advisory Statement
Tested To Comply
With FCC Sta
ndards
This equipment has been tested and found to comply with the limits for a class B digital device,
Pursuant to Part 15 of the FCC rules. The operation is subject to the following two con
(1) This device may not cause
FOR HOME OR OFFICE US
E
harmful interference, and
(2) This device must accept any interference received, including interference that may cause
undesired operation.
These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio frequency energy
and, if not installed or used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment o
to try to correct the interference by one or more of the follow
1) Reorient or relocate the receiving antenna,
2) Increase the separation between th
3) Connect the equipment to an outlet on
receiver is connected,
5
050801_pv1.5_Ripwave-MX Modem User Guide_40-00097-00j(4.3.1)
Navini Networks, Inc. Ripwave-MX Modem User Guide
Battery Precautions
CAUTION! To reduce risk of injury or fire, follow these instructions when handling the battery.
1. Ris
2. Do
disp
3. Do
har
imm
4. Do ns except per the instructions in this manual.
5. If u l om the equipment if the equipment is not
goi to be used for a ak and cause damage to the
equipment.
6. Exe
suc bra
7. Store the battery pack in a dry place, 0 to +40 degrees Celsius.
8. Dis
k of explosion is possible if the battery is replaced with one not supplied by Navini Networks.
not dispose of the battery in a fire. They may explode. Check with the local codes for battery
osal guidelines.
not open or mutilate the battery. The battery contains substances that are toxic, corrosive, or
mful to humans. If battery substances come in contact with the skin, seek medical help
ediately.
not attempt to recharge the battery by any mea
sing an optional interna battery, remove the battery fr
ng long period of time. The battery could le
rcise care when handling the battery to prevent shorting the battery with conducting materials
h as celets, rings, and keys.
pose of used batteries according to environmental guidelines.
6
050801_pv1.5_Ripwave-MX Modem User Guide_40-00097-00j(4.3.1)
Navini Networks, Inc. Ripwave-MX Modem User Guide
Introduction Con
(LM
nomadic service availability as a computer with this device is
as long as there is coverage in the area.
Package
ventory Please verify the contents of your LMX Modem package. If you do
not find all of these items in your package, notify the supplier fro
In
M
gratulations! The Liquid Cystal Display Ripwave-MX
X) dual-mode Modem is a user-friendly, easy-to-install device
that helps you connect wirelessly to the Internet. It provides
complete broadband Internet access to residential and small
professional hardware installation. The LMX Modem also provides
moved from room to room, location to location, or even city to city
m
whom you obtained it.
LMX Modem
PC-to-LMX Modem cable (Ethernet straight cable)
Navini Diagnostics Installation CD
X Modem will operate in either the 2.4 GHz, 2.5-2.7
ed on the next page.
LMX Modem AC power adapter
Ripwave-MX Modem User Guide (on CD)
Ripwave-MX Modem Quick Installation Guide
X Models
Your LM
L
GHz, 3.4 GHz, or 3.5 GHz range. Within each frequency range
there are several model types, describ
office/home office (SOHO) customers without the necessity of
2.4, 2.5-2.7, 3.4 & 3.5
GHz LMX Modem
7
050801_pv1.5_Ripwave-MX Modem User Guide_40-00097-00j(4.3.1)
Navini Networks, Inc. Ripwave-MX Modem User Guide
Operating
Frequencies
equirements
ee, also, Addendum 1)
Minimum
omputing C
R
(S
Modem Model Frequency Range Operating
Band
2.4 GHz
LMX
2400-2483
LMX E 2.400 GHz – 2.483 GHz ISM
2.5 – 2.7
GHz LMX
2.5-2.6 LMX
E 2.500 GHz – 2.686 GHz MMDS/ITFS
3.4 GHz
LMX
3410-3525
LMX E 3.410 GHz – 3.525 GHz BWA/FWA
3.5 GHz
LMX
3475-3600
LMX E 3.475 GHz – 3.600 GHz BWA/FWA
The “E” in the model name stands for Ethernet. Your computer
indows® 95 or later).
should have this port for connecting the Modem.
An Ethernet connection will function with any Win32®
em (WOperating Syst
Operating
System1: Ethernet Modems: Any Win32 Operating System
(OS) - Windows 952, Windows NT, Windows 983,
E3,
Ensure that the pc network port is enabled.
Windows 98SE3, Windows 2000, Windows M
Windows XP4, or later version.
General Information:
CPU: Pentium level or higher
RAM: 32 MB or the Operating System minimum,
whichever is greater
Hard Drive: 50 MB free disk space for either monitoring
software (Navini Diagnostics Tool) 5
Monitor: 256 colors, 800 x 600 resolution
1NOTE: To upgrade your Operating System after loading the Navini
Diagnostics software, you must first uninstall Navini Diagnostics prior to
upgrading the OS. Otherwise, Navini Diagnostics will not work. See Uninstall
structions in this Guide.
Internet Explorer 3.0 or higher is required for installation on Windows
5 Operating Systems.
The LMX Modem must be left powered ON whenever you shut down
r restart any Windows 98 or ME platforms. If the Modem is off, a blue screen
pears on the monitor. In the event that happens you will most likely have to
ower cycle the PC.
Windows XP must be Service Pack Level 1 or higher.
Navini Diagnostics software is supported on Win98, Win98SE,
in2000, WinME, WinXP or higher, Mac X (also called Mac10) or higher, or
in
2NOTE:
9
3NOTE:
o
ap
p
4NOTE:
5NOTE:
W
8
050801_pv1.5_Ripwave-MX Modem User Guide_40-00097-00j(4.3.1)
Navini Networks, Inc. Ripwave-MX Modem User Guide
hysical
haracteristics
ed Hat Linux 8.0 or higher. Mac users must have the Snuffit extraction
sof
T ual yo roc f installing
t X Mo softw dev d to
o e v alu
T z sed in most of the illustrations in this
m her no 2.5 3.5
G els
you experience any difficulties with your unit, please contact
ur
e
Rip
odems (2.4, 2.5-2.7, 3.4, & 3.5 GHz)
P
C
R
tware.
his man
he LM
will guide
dem and
u through the simple p
are, which has been
ess o
elope
ptimize th
H
ease and con enience for you, our v ed customer.
he 2.6 G
anual w
model is u
e there are differences in the 2.4, -2.7, 3.4 &
Hz mod .
If
your Service Provider or the vendor from whom you obtained yo
LMX Modem.
Th following figure shows the physical characteristics of the
wave-MX LMX Modems.
LMX M
Front
Antenna
Liquid Crystal Display
On/Off Button
Back
Power Adapter Connection
Ethernet Cable Connection
Front
Antenna
Liquid Crystal Display
On/Off Button
Front
Antenna
Liquid Crystal Display
On/Off Button
Back
Power Adapter Connection
Ethernet Cable Connection
Back
Power Adapter Connection
Ethernet Cable Connection
9
050801_pv1.5_Ripwave-MX Modem User Guide_40-00097-00j(4.3.1)
Navini Networks, Inc. Ripwave-MX Modem User Guide
Installing the
MX Modem
ee, also, Addendum 1)
wing instructions are for the installation of the LMX
L
(S
The follo
Modem. Please read all instructions before attempting the
installation. It is advisable to turn off the computer and the LMX
Modem before performing the installation.
Step Action Illustration
1. Connect the Ethernet
cable to the Ethernet
port on the computer.
2. Connect the other end of
the Ethernet cable to the
LMX Modem.
3. Connect the AC power
adapter to the LMX
Modem. Plug the other
end into a 110/220 VAC
60/50 Hz outlet.
CAUTION! Only use
the AC power adapter
specifically supplied
with the LMX Modem.
Using any other adapter
may cause damage to
the Modem.
Connection for
Ethernet cable
Connection for
Ethernet cable
Connection for
Power Adapter
Connection for
Power Adapter
10
050801_pv1.5_Ripwave-MX Modem User Guide_40-00097-00j(4.3.1)
Navini Networks, Inc. Ripwave-MX Modem User Guide
Installing the LMX
Modem, continued
Step Action Illustration
4. Rotate the antenna on
the LMX Modem
clockwise 180 degrees
to the UP position. This
reveals the LMX
or
movement of the
antenna in any other
direction may cause
damage to the LMX
Modem.
Modem liquid crystal
display (LCD).
CAUTION! Rotation
5. Turn the Modem ON by
pushing the On/Off
button in.
6. If the LCD turns on,
proceed to Step 7. If not
there is a problem with
the Modem or the AC
power adapter. Ch
,
eck all
cables for proper
connection. If there is
still a problem, contact
the supplier who gave
you the package.
Antenna
Liquid Crystal
Display
Antenna
Liquid Crystal
Display
Liquid Crystal
Display
On/Off ButtonOn/Off ButtonOn/Off Button
Liquid Crystal
Display (LCD)
Liquid Crystal
Display (LCD)
11
050801_pv1.5_Ripwave-MX Modem User Guide_40-00097-00j(4.3.1)
Navini Networks, Inc. Ripwave-MX Modem User Guide
Installing the LMX
Modem, continued
Accessing the
nternet
roubleshooting
CD Display
I
T
L
Step Action Illustration
7.
Turn your computer on
and log in.
8. Proceed to the
“Troubleshooting”
section of this manual.
With your Modem
com
access the Internet, open the web browser that is installed on your
compu
After installation, if you are experiencing difficulties with your
rne w th
Requir m 1 to ensure your computer meets
those r s. Next, go back over the installation procedures
and ensure those steps were completed properly.
Assuming the computer requirements are met and the installation
steps were completed as required, you will need to observe the
signal sync and signal strength indicators on the LMX Modem.
You also may need to install the monitoring software. This
software, called the Navini Diagnostics, is provided on a CD that
came in your Modem package. The Navini Diagnostics software
assists in solving connection problems as well as providing other
uab
The LCD Display is a text-based display that provides valuable
inform em’
conjun software, you can troubleshoot
signal issues, network connections, and power problems.
now installed, and both the Modem and
puter power on, you should be able to surf the Internet! To
ter.
Inte t connection, please revie
ements and Addendu
equirement
e Minimum Computing
val
le information.
ation about the LMX Mod
ction with the monitoring
s operation. Used in
CONNECTED
Q
S
CONNECTED
Q
SS
12
050801_pv1.5_Ripwave-MX Modem User Guide_40-00097-00j(4.3.1)
Navini Networks, Inc. Ripwave-MX Modem User Guide
LCD Display, continued fo finitions for the LCD in ications.
The llowing table provides de d
LCD Indicator:
SEARCHING
Blinking flash: Syncing
CONNECTED: Locked-on
S: Signal Strength Meter (SSI)
0 bars S<100
1 bar -99<S-100
2 bars -96<S-99
3 bars -92<S-95
4 bars -88<S-91
5 bars -84<S-87
6 bars -80<S-83
7 bars -76<S-79
8 bars -70<S-75
Q: Signal Quality Meter (SNR)
0 bars Q<10
1 bar 10<Q-12
2 bars 13<Q-14
3 bars 15<Q-16
4 bars 17<Q-18
5 bars 19<Q-20
6 bars 21<Q-22
7 bars 23<Q-24
8 bars Q24
Activity Indicator:
Flashing arrows: Traffic (both arrows flash)
Blank: No Traffic Activity
13
050801_pv1.5_Ripwave-MX Modem User Guide_40-00097-00j(4.3.1)
Navini Networks, Inc. Ripwave-MX Modem User Guide
Installing Navin
iagnostics i
NavDiag)
ote: The screenshots shown in these instructions were taken from
E operating system, the screens you see may vary from the
the instructions.
D
(
N
a laptop with Windows 2000. If you have a Windows 98, XP, or
M
screens shown in
Step Action Illustration
1. Shut down all pro
including anti-viru
grams,
before installing the
Navini Di
software.
s
software programs,
agnostics
2. Insert the
Diagnositcs Installation
CD into the CD-ROM
drive.
Navini
3. Open the CD by clicking
the folder
Navini_Diagnostics.
on the My Computer
icon. Double-click on
named
4. Double-click on the icon
for the file
navdiag_ xe*.
This will lly
start the installation of
Navini Diagnostics.
s running Mac
ac.sit or
ile. Mac
users will need the Snuffit
extraction software.
Example:
windows.e
automatica
*If your PC i
or Linux software, you will
need the navdiag_m
navdiag_linux.bin f
5. The InstallAnywhere
window appears. The
progress bar indicates
that InstallAnywhere has
initialized.
Windows 2000 Screen
14
050801_pv1.5_Ripwave-MX Modem User Guide_40-00097-00j(4.3.1)
Navini Networks, Inc. Ripwave-MX Modem User Guide
050801_pv1.5_Ripwave-MX Modem User Guide_40-00097-00j(4.3.1)
ag),
Installing Navini
Diagnostics (NavDi
continued
Step Action Illustration
6. The Navini Diagnostics
Language screen
appears*. Select a
and click OK
Windows 2000 Screen
language
to continue.
7. The progress bar
indicates the files being
installed.
Windows 2000 Screen
8. The Navini Diagnostics
Introduction screen
appears. Click Next to
continue.
Windows 2000 Screen
9. t
ead the
e License
Agreement is not
accepted, you cannot
install the software.
Windows 2000 Screen
The License Agreemen
creen appears. Rs
Licensing Agreement.
Select the I Accept
option, and click Next to
continue.
NOTE: If th
15
Navini Networks, Inc. Ripwave-MX Modem User Guide
Installing Navini
iag), Diagnostics (NavD
continued
Step Action Illustration
10. The Choose Install
the
ish to
continue.
NOTE: The default
installation folder provided
by the software is shown in
the illustration.
Folder screen appears.
Enter the name of
folder where you w
install the software.
Click Next to
Windows 2000 Screen
11. cut
am Group,
and click Next to
continue.
Windows 2000 Screen
The Choose Short
Folder screen appears.
Select the default, In a
new Progr
12.
eview the
ontents for accuracy.
lick Install to
ontinue.
or your installation and
omputer, this screen
ay have different
The Pre-Installation
Summary screen
appears. R
c
C
c
F
c
m
information than what is
shown in the illustration.
Windows 2000 Screen
13. The Installing screen
will display as the
application files are
loaded.
16
050801_pv1.5_Ripwave-MX Modem User Guide_40-00097-00j(4.3.1)
Navini Networks, Inc. Ripwave-MX Modem User Guide
Installing Navini
iagnostics (NavDiag),
ontinued
roubleshooting
sing Navini
iagnostics
NavDiag)
D
c
T
U
D
(
Step Action Illustration
14. At the Install Complete
screen, click Done to
window.
Windows 2000 Screen
close the
pe s s
on the Navini Diagnostics icon on your desktop.
To o n the Navini Diagnostic oftware application, double-click
Navini Diagnostics.lnk
The Connection Status screen will open and display data if the
Modem is in session. The screen will refresh live data every
second.
17
050801_pv1.5_Ripwave-MX Modem User Guide_40-00097-00j(4.3.1)
Navini Networks, Inc. Ripwave-MX Modem User Guide
Troubleshooting Using
continued
sent the PC, the co een the PC and the
em ction betwee
Base Station, and the Base Station to which the Modem
commu rks over the connections indicate
working connections.
If the connection between the PC and the Modem or between the
odem and the Base Station is interrupted, an “X” is positioned
ver the corresponding icon.
The Signal Strength and Signal Quality are dynamic bar areas that
dicate how well your Modem is receiving signals from the Base
ceived by the Modem. The strength of the signal is
represented by a group of colored bars. The higher the pile of bars
Navini Diagnostics
(NavDiag),
The icons repre nnection betw
Mod , the Modem, the conne
nicating. Check ma
n the Modem and the
is
M
o
in
Station. In particular, the Signal Strength bar area graphically
represents the strength of the Absolute BTS Synchronization
Signal re
goes, the stronger the signal is. The color of the bars also gives an
indication of the strength of the signal. Green lines indicate an
excellent signal. Orange lines indicate a good signal while red lines
indicate a weak signal.
18
050801_pv1.5_Ripwave-MX Modem User Guide_40-00097-00j(4.3.1)
Navini Networks, Inc. Ripwave-MX Modem User Guide
Troubleshooting Using
Navini Diganostics
(NavDiag), continued
The Signal Quality bar area graphically represents the Signal-to-
Noise Ratio (SNR) of the downlink access code channel (ACC)
received by the Modem. Again, the quality of the signal is
represented by a group of colored bars. The higher the pile of
goes, the better the SN
bars
R of the signal. The color of the bars also
ives an indication of the quality of the signal. Green lines indicate
n a good signal while red
nes indicate a weak signal.
o increase the strength and quality of the signal, change the
cation of the LMX Modem. Try moving it closer to a window, to
le
is repositioned, observe the Signal
trength and Signal Quality bars. Position the Modem for
he History graphs plot the change in signal strength and signal
uality over time. The graphs cover the last minute and are updated
very second. Read the graphs from right to left. The right side of
t of the Connection Status screen, are four parameters.
hese parameters are BTS ID, Network ID, Active SW Version,
nd Standby SW Version. The BTS ID and Network ID indicate
e BTS to which the Modem is currently synchronized and the
etwork in which the Modem is operating. Active SW Version and
tandby SW Version indicate the version number of the software
urrently loaded in the “active side” and “standby side” of the
odem’s flash memory.
g
a excellent signal. Orange lines indicate
li
T
lo
a higher location, away from other wireless devices (microwave
ovens, cordless phones), and away from metal objects (shelves, fi
cabinets). As the LMX Modem
S
maximum signal strength and quality.
T
q
e
the graph represents the most recent status of your Modem.
A the bottom
T
a
th
n
S
c
M
19
050801_pv1.5_Ripwave-MX Modem User Guide_40-00097-00j(4.3.1)
Navini Networks, Inc. Ripwave-MX Modem User Guide
Troubleshooting Using
Navini Diganostics
(NavDiag), continued
The two letters in parenthesis following the release number
indicate the type of software load. JD indicates Joint Detection,
while EN indicates Enhanced Nulling.
On the left-hand side of the screen, there are five screen option
Connection Status, Configuration, Trend Analysis, Statistics, and
About. The following screen will appear when you press the
Configuration button.
s:
h date your Modem’s
ftware if you are so directed by your Service Provider. If you
ust update your Modem’s software, your Service Provider will
rovide you with instructions regarding what to do.
he Allow Customer Satisfaction Reporting box gives you control
ver whether your Service Provider is allowed to monitor your
odem using the remote CPE Logging function and to use your
ess
T e Configuration screen enables you to up
so
m
p
T
o
M
computer to store the CPE log files created by this function. By
default, this box is checked which means the Service Provider can
monitor your Modem.
The Trend Analysis screen enables you to view how some Modem
parameters evolve over time. With this screen, you can select up to
three parameters to plot. To view the Trend Analysis screen, pr
the Trend Analysis button.
20
050801_pv1.5_Ripwave-MX Modem User Guide_40-00097-00j(4.3.1)
Navini Networks, Inc. Ripwave-MX Modem User Guide
Troubleshooting Using
Navini Diganostics
(NavDiag), continued
y ing screen will
ppear. This screen displays the value of the selected parameters
ver the last five minutes, updated once every second. The graphic
rolls from right to left.
B pressing the Plot Graph button, the follow
a
o
sc
To view the Statistics screen, press the Statistics button. The
statistics screen enables you to view the current value of selected
parameters. These values are updated as they change over time.
21
050801_pv1.5_Ripwave-MX Modem User Guide_40-00097-00j(4.3.1)
Navini Networks, Inc. Ripwave-MX Modem User Guide
Troubleshooting Using
Navini Diganostics
(NavDiag), continued
The About screen provides vital information such as the version of
r
tton. An example of the About screen
llows.
Help button appears on the top right corner of all the NavDiag
indows. The Help button gives you two options. The first option,
n NavDiag, provides help text on the functionality of the
avDiag program. The second option, About NavDiag, is
quivalent to clicking on the About icon.
the Navini Diagnostics software currently installed in your
computer. It also provides a website address and telephone numbe
where you can contact your Service Provider. To view the About
screen, press the About bu
fo
A
w
O
N
e
22
050801_pv1.5_Ripwave-MX Modem User Guide_40-00097-00j(4.3.1)
Navini Networks, Inc. Ripwave-MX Modem User Guide
050801_pv1.5_Ripwave-MX Modem User Guide_40-00097-00j(4.3.1)
iagnostics
NavDiag)
ftware, e.g., to upgrade your Operating System software, follow
e procedure below.
ote: The screen shots shown in these instructions were taken
om a laptop with Windows 2000. If you have a Windows 98, XP,
r ME operating system, the screens you see may vary from the
reens shown in the instructions.
Uninstalling
Navini
D
(
If for some reason you need to uninstall the Navini Diagnostics
so
th
N
fr
o
sc
Step Action Illustration
1. On your computer
screen lower left corner,
click on Start >
Programs > NavDiag >
Uninstall.
Windows 2000 Screen
2. The Install-Anywhere
Un
installer screen Windows 2000 Screen
appears. Click
Uninstall.
3. The screen will indicate
the application files are
uninstalled.
Windows 2000 Screen
23
Navini Networks, Inc. Ripwave-MX Modem User Guide
Uninstalling Navini
Diagnostics (NavDia
continued
g),
ptional
atteries
ptional External
attery Packs
O
B
O
B
Step Action Illustration
4. The Uninstall Complete
screen appears w
hen
finished. Click on Quit
Windows 2000 Screen
to close the Uninstall
screen.
5.
e uninstall
process. This will ensure
the uninstall process
completes successfully.
Restart the PC to
complete th
LM ptional extern
associa se battery packs a
External Battery Pack (S-EBP) and the Heavy Duty-External
Battery Pack (HD-EBP). The Standard External Battery Pack (S-
EBP) provides approximately 16 Watt-Hours of power while the
Heavy Duty-External Battery Pack (HD-EBP) provides
approximately 44 Watt-Hours of power.
This section describes how to install and charge the optional
external battery packs.
The ex stalled insid
they are connected to the Modem. Before we discuss how to
connect and charge the external battery packs, let’s discuss the
similarities and differences between the Standard External Battery
Pack (S-EBP) and the Heavy Duty External Battery Pack (HD-
EBP).
Both the S-EBP and HD-EBP can be used with any of the
LMX Modems.
The HD-EBP provides 44 Watt-Hours of power while the S-
EBP provides 16 Watt-Hours of power.
The X Modems have two o
ted with them. The
al battery cks
re the Standard
pa
.
ternal batteries are not in e the Modem. Instead
24
050801_pv1.5_Ripwave-MX Modem User Guide_40-00097-00j(4.3.1)
Navini Networks, Inc. Ripwave-MX Modem User Guide
Optional External Battery
onnecting the
tandard External
attery Pack (S-
The amount of time the S-EBP and HD-EBP can operate before
c varies. This time is dependent of the usage run on
the w g table shows example
app ong the batteries can run before a
rec
e
Packs, continued
C
S
B
EBP)
re harging
LMX Modem. The follo
roximations for how l
harge is required.
Usag
in
Approximate hours of Usage Before
Recharge Required
S-EBP HD-EBP
Standard 2 Up to 6
Moderate 1.5 4.0 Approximately
Heavy 1 Up to 3.5
con any of the LMX Modems, plug the
battery’s pig-tail cord into the input socket located on the back of
the Mo
To nect the S-EBP to
dem.
25
050801_pv1.5_Ripwave-MX Modem User Guide_40-00097-00j(4.3.1)
Navini Networks, Inc. Ripwave-MX Modem User Guide Navini Networks, Inc. Ripwave-MX Modem User Guide
26
050801_pv1.5_Ripwave-MX Modem User Guide_40-00097-00j(4.3.1)
The Indicator Light
on the Standard
External Battery
Pack (S-EBP)
Charging the
Standard External
Battery Pack (S-
EBP)
The S-EBP has one indicator light that resides on top of the unit.
This light has four states associated with it. The states are
described below.
Light is off when any of the following apply:
The battery is not connected to a Modem or to the battery
charger
The battery is connected to a Modem but the Modem is off
The battery is connected to a Modem and the Modem is on
but the battery power is depleted
Light is green when the battery is on and fully charged.
Light is amber when the battery has power but is no longer
fully charged. If the battery is connected to the battery charger,
an amber light means the battery is being charged.
Light is red when the battery is low on power. When the
battery is low, it has approximately 15% of its charge left.
The S-EBP will need to be recharged when the battery is connected
to a Modem and the Modem is turned on but the LED on top of the
battery remains off (indicating the battery has no power) or is red
(indicating the battery level is low).
To recharge the S-EBP, use only the 12V charger that came with
the S-EBP. Using any other charger may damage the battery. To
charge the S-EBP, plug the 12V adapter into the 12V input socket
on the S-EBP.
NOTE: The battery may charge while it is connected to a Modem.
NOTE: Do not attempt to plug the 12V adapter into the Modem as
this may harm the Modem.
26
050801_pv1.5_Ripwave-MX Modem User Guide_40-00097-00j(4.3.1)
Navini Networks, Inc. Ripwave-MX Modem User Guide
Connecting and
isconnecting the
eavy Duty
xternal Battery
ack (HD-EBP)
If y
of t ck,
foll
D
H
E
P
ou have a HD-EBP, the battery pack is installed in the bottom
he LMX Modem. To install and or remove the battery pa
ow the steps based on your model of Modem.
Step Action Illustration
1. De e front bu
on the HD-EBP so that
the front prong moves in
towards the center of the
H
press th tton
D-EBP.
2. Place the back slot of
the LMX Modem over
the back prong of the
HD-EBP.
3. Place the front part of
the opening on the LMX
Modem over the front
prong on the battery.
4. Release the button on
the battery.
5. Press firmly down on
the Modem so that the
Modem firmly connects
with the HD-EBP.
Front
button
Front prong Back prong
Front slot Back slot
Front
button
Front prong Back prong
Front
button
Front prong Back prong
Front slot Back slotFront slot Back sl
ot
27
050801_pv1.5_Ripwave-MX Modem User Guide_40-00097-00j(4.3.1)
Navini Networks, Inc. Ripwave-MX Modem User Guide
Connecting and
Disconnecting the HD-
EBP, continued
050801_pv1.5_Ripwave-MX Modem User Guide_40-00097-00j(4.3.1)
ht
Heavy Duty
xternal Battery
ack (HD-EBP)
The Indicator Lig
on the
E
P
Step Action Illustration
6. Plug the HD-EBP’s pig-
tail cord into the power
slot on the Modem.
7. To remove the battery
pack from the Modem,
unplug the pig-tail cord.
Depress the front button
on the HD-EBP. Lift the
Modem off of the
battery pack.
he HD-EBP has one indicator light T that resides on the back end of
ry is not connected to a Modem or to the battery
but the Modem is off
and the Modem is on
Light is green when the battery is on and fully charged.
Light is amber when the battery has power but is no longer
fully charged. If the battery is connected to the battery charger,
an amber light means the battery is being charged.
Light is red when the battery is low on power. When the
battery is low, it has approximately 15% of its charge left.
the unit near the pig-tail cord. This light has four states associated
with it. The states are described below.
Light is off when any of the following apply:
The batte
charger
The battery is connected to a Modem
The battery is connected to a Modem
but the battery is empty of power
28
Navini Networks, Inc. Ripwave-MX Modem User Guide
Charging the
P)
are &
aintenance
he HD-EBP will need to be recharged when the battery is
n
).
HD-EBP, use onl rger that came with
HD arger may damage the battery.
To cha
Plug the 12V adapter into the 12V input socket on the HD-
EBP.
Plug the other end of the adapter into an electrical wall socket.
NOTE: Do not attempt to plug the 12V adapter into the Modem as
this may harm the Modem.
NOTE: The battery may charge while it is connected to a Modem.
The LM to give years of trouble-free service.
ens following care and maintenance
truc
Ke st and moisture. If the Modem gets
we ediately.
Handle the Modem gently. Dropping it or mishandling it can
cause damage to the plastic shell or the electronic circuitry.
Keep the Modem away from high temperatures. Heat can cause
damage to the plastic shell or the electronic circuitry.
Heavy Duty
External Battery
Pack (HD-EB
C
M
T
connected to a Modem and the Modem is turned on but the LED o
the back of the battery remains off (indicating the battery has no
power) or is red (indicating the battery level is low
To recharge the y the 12V cha
the -EBP. Using any other ch
rge the HD-EBP:
X Modem is designed
ure operation, read theTo
ins
tions.
ep the Modem free of du
t, use a towel to dry it imm
Pig
-tail Cord
12V Input Socket
Plugs into
Wall Socket
29
050801_pv1.5_Ripwave-MX Modem User Guide_40-00097-00j(4.3.1)
Navini Networks, Inc. Ripwave-MX Modem User Guide
050801_pv1.5_Ripwave-MX Modem User Guide_40-00097-00j(4.3.1)
are & Maintenance,
pgrading the
Use only a mild detergent and a soft, damp cloth to clean the
o not use any chem ves to clean the
pla
If t h the Modem, do not attempt to repair
it yourself. Report the problem to your Service Provider.
If you are going to upgrade your Operating System after
loading the Navini monitoring software (Navini Diagnostics),
you must first uninstall the monitoring software prior to
upgrading the OS. Otherwise, the monitoring software will not
work. See Uninstall instructions in this Guide.
The LMX Modem must be left powered ON whenever you shut
down or restart any Windows 98 or ME platforms. If the
Mo n ap ears on the monitor. In the
event this happens you will mostly likely have to power cycle
the
akes
e Modem work.
our Modem.
r
upgrade the Modem. This method is used for systems that have
You u to use your Navini
This
0
powered on during the OTA upgrade process. The OTA upgrade is
ormally transparent to the user; in other words, there should be no
oticeable service interruption. The web or CD upgrade comes
ith instructions and takes a minimal amount of time to complete.
ote: If you use the Navini Diagnostics Tool to upgrade your
odem software load, the computer connected to your Modem
C
continued
U
Modem
M dem. Do icals or abrasi
stic shell.
here is a problem wit
dem is off, a blue scree
PC.
p
There are three different ways to upgrade the software that m
th
Your Service Provider may perform an over-the-air (OTA)
upgrade, where the up-to-date software files are transferred
wirelessly from the Base Station to y
Your Service Provider may provide a downloadable web file o
CD-ROM with software to be installed on your PC and used to
a software release prior to 4.0.
r Service Provider may instruct yo
Diagnostics Tool to upgrade your Modem software load.
method is used for systems that have a software release of 4.
or greater.
The latter two methods are used only if the Modem was not
n
n
w
N
M
30
Navini Networks, Inc. Ripwave-MX Modem User Guide
must already have an IP address. If your computer does not h
IP address, contact your Service Provider. If you attempt to
upgrade your Modem software through the Navini Diagnostics
Tool and the computer does not have an assigned IP a
ave an
ddress, you
ay see one of the following error messages:
m
31
050801_pv1.5_Ripwave-MX Modem User Guide_40-00097-00j(4.3.1)
Navini Networks, Inc. Ripwave-MX Modem User Guide
3232
ADDENDUM 1: R Troubleshooting
- For Use With All
C Operating Systems
rior to installing the Navini System
eets the criteria given in the tab ay
ccur as a result of installation. It
stalled prior to installing the Na
ipwave-MX Modem - PC
Ripwave-MX LMX Modems and Navini Diagnostics Software -
P
P Diagnostics software, please check to insure that the PC Operating
le below. If these criteria are not met, unpredictable problems m
is recommended that the user have the latest Windows
m
oc updates
vini Diagnostics software. in
Operating System Ethernet interface Notes
Win95 Supported 1, 2
Win98 Supported 2
Win98, 2nd ed. Supported 2
WinME Supported 2
Win 2000 Supported 2
Win NT 3.0/4.0 Supported 1, 2
Win XP Supported 3
Note 1: Internet Explorer 3.0 or
ote 2: Requires Service Pack 1
ileges.
thernet Interface
he Ethernet Modem may be con
onnect multiple PC devices to a PC
sers and is analogous to a multi- thernet LAN. Check with your Service
rovider if multiple IP addressing is required for your particular configuration. The distinct advantage of
e Ethernet Modem is that it s it ideal
r small businesses that have a m
ddresses can be assigned to the d ents, or
oint-to-Point Protocol Over Eth E).
ultiple Interface Environm
hen a PC has an internal in LMX
odem, you should do the fo
If the wireless connectio
If the built-in wireless connection is required for local networking and wireline Ethernet is used via
the LMX Modem for Int hat the
wireline interface’s defa
higher is required
tics software, the user MUST have Administrative priv
N
Note 3: To load the Navini Diagnos
E
T nected to a PC via an Ethernet connection. Also, it is possible to
single Modem. The multi-PC configuration is transparent to the
PC configuration on a normal E
c
u
P
th connects to any device that has an Ethernet interface. This make
ix of devices, such as Unix machines, Apple Computers, etc. IP
evices dynamically via a DHCP server, or as Fixed IP assignm
ernet (PPPo
fo
a
P
M ents
terface (for example, a Wireless Ethernet interface) in addition to the
llowing:
n is not required, disable the internal wireless connection
W
M
ernet connection, change the interface metric configuration so t
ult gateway is used. (See your Operating System’s User Guide.)
32
050801_pv1.5_Ripwave-MX Modem User Guide_40-00097-00j(4.3.1)
Navini Networks, Inc. Ripwave-MX Modem User Guide
3333
outers
either the Navini LMX Mon through a
uter.
onfiguration Options
Results of Correct Navini Diagnostics Installation
Experienced PC users can check the results of the Navini Diagnostics installation by looking at
the log file that is created during the installation process. The log file is named
“Navini_Diagnostics_InstallLog.log.” It is located under c:\Program Files\Navini
Diagnostics.
-------
Install Begin: Tue Jul 20 12:15:22 CDT 2004
Install End: Tue Jul 20 12:15:30 CDT 2004
Created with Zero G's InstallAnywhere 4.5.3 Enterprise Build 1394
Summary
-------
Installation: Successful with warnings.
2 SUCCESSES
1 WARNINGS
0 NONFATAL ERRORS
0 FATAL ERRORS
R
N itor nor the Navini Diagnostics software will work if it goes
ro
C
Modem connected
to a single computer
(Ethernet)
Modem providing
access to the I
via an Etherne
nternet
t hub
Host computer used
as a router to network
(USB or Ethernet)
Modem providing
access to the Internet
via an Ethernet hub
Modem providing
access to the Internet
via an Ethernet hub
Host computer used
as a router to network
(USB or Ethernet)
Host computer used
as a router to network
(USB or Ethernet)
Modem connected
to a single computer
(Ethernet)
Modem connected
to a single computer
(Ethernet)
33
050801_pv1.5_Ripwave-MX Modem User Guide_40-00097-00j(4.3.1)
Navini Networks, Inc. Ripwave-MX Modem User Guide
Action Notes:
o
stall Lo
heck Disk
tes: NOTE - Required Disk Space: 29,363,315; Free Disk Space: 30,806,179,840
\Navini Networks\NavDiag, ValueName:
stallDirectory
Status: W
s: WARNIN
M stry Entry: Key: HKEY_LOCAL_M FTWARE\Navin orks, Value Name: , Value Data:
Status: SUCCESSFUL
M : Key: HKEY_LOCAL_M FTWARE\Navin etworks\NavDiag, Value Name: , Value
D
Status: SUCCESSFUL
M ry Entry: Key: HKEY_LOCAL_M FTWARE\Navin etworks\NavDiag, Value Name:
ry, Value Data: C:\Program Files\Nav
s\NavDiag\Uninstall\
vini Diagnostics (Install All Uninstaller Components)
ninstall NavDiag.lax
Status: SUCCESSFUL
stall File: C:\Program Files\NavDiag\Uninstall\resource\iawin32.dll
tal
N ne.
g Detail: In
C
Space: C:\Program Files\NavDiag
Status: SUCC
Additional No
ESSFUL
Install Directory: C:\Program Files\NavDiag\
Status: SUCCESSFUL
Get Registry Entry: Key: HKEY_LOCAL_MACHINE\SOFTWARE
In
ARNING
Additional Note G - Win32Exception
ake Regi ACHINE\SO i Netw
ake Registry Entry ACHINE\SO i N
ata:
ake Regist
stallDirecto
ACHINE\SO
Diag
i N
In
Status: SUCCESSFUL
Install Directory: C:\Program File
Status: SUCCESSFUL
Install Uninstaller: Na
Status: SUCCESSFUL
Install Directory: C:\Program Files\NavDiag\jre
Status: SUCCESSFUL
Install File: C:\Program Files\NavDiag\Uninstall\Uninstall NavDiag.exe
Status: SUCCESSFUL
Install File: C:\Program Files\NavDiag\Uninstall\U
Install Directory: C:\Program Files\NavDiag\Uninstall\resource\
Status: SUCCESSFUL
In
Status: SUCCESSFUL
Ins l File: C:\Program Files\NavDiag\Uninstall\resource\remove.exe
Status: SUCCESSFUL
34
050801_pv1.5_Ripwave-MX Modem User Guide_40-00097-00j(4.3.1) 3434
Navini Networks, Inc. Ripwave-MX Modem User Guide
Make Registry Entry: Key:
me:
Status: SUCCESSFUL
KEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\Navini Diagnostics, Value Name:
UninstallString, Value Data: "C:\Program Files\NavDiag\Uninstall\Uninstall NavDiag.exe"
Status: SUCCESSFUL
Install Uninstaller: Navini Diagnostics (Install All Uninstaller Components)
Status: SUCCESSFUL
Create LaunchAnywhere: Navini Diagnostics.exe (Install All LaunchAnywhere Java Executable Components)
Status: SUCCESSFUL
Install File: C:\Program Files\NavDiag\Navini Diagnostics.exe
Status: SUCCESSFUL
Install File: C:\Program Files\NavDiag\Navini Diagnostics.lax
Status: SUCCESSFUL
Create LaunchAnywhere: Navini Diagnostics.exe (Install All LaunchAnywhere Java Executable Components)
Status: SUCCESSFUL
Install Directory: C:\Program Files\NavDiag\data\
Status: SUCCESSFUL
C:\Program Files\NavDiag\data\images\splash.gif
Status: SUCCESSFUL
le: C:\Program Files\NavDiag\data\images\buttonbar.gif
data\images\about2.gif
stall File: C:\Program Files\NavDiag\data\images\about1.gif
Status: SUCCESSFUL
le: C:\Program Files\NavDiag\data\images\about.gif
C:\Program Files\NavDiag\data\images\uninstall.gif
tatus: SUCCESSFUL
rogram Files\NavDiag\data\log\
s: SUCCESSFUL
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\Navini Diagnostics, Value Na
DisplayName, Value Data: Navini Diagnostics
Make Registry Entry: Key:
H
Install Directory: C:\Program Files\NavDiag\data\images\
Status: SUCCESSFUL
Install File: C:\Program Files\NavDiag\data\images\billboard.gif
Status: SUCCESSFUL
Install File:
stall FiIn
Status: SUCCESSFUL
nstall File: C:\Program Files\NavDiag\I
Status: SUCCESSFUL
In
nstall FiI
Status: SUCCESSFUL
Install File:
S
C:\PInstall Directory:
Statu
35
050801_pv1.5_Ripwave-MX Modem User Guide_40-00097-00j(4.3.1) 3535
Navini Networks, Inc. Ripwave-MX Modem User Guide
Install Directory: C:\Program Files\NavDiag\data\lib\
Status: SUCCESSFUL
C:\Program Files\NavDiag\data\lib\ctl.jar
Status: SUCCESSFUL
Diag\data\lib\navDiag.jar
\lib\jfreechart-0.9.13.jar
tatus: SUCCESSFUL
Status: SUCCESSFUL
avDiag\data\doc\
Status: SUCCESSFUL
irectory: C:\Program Files\NavDiag\config\
stall Directory: C:\Documents and Settings\luis\Start Menu\Programs\NavDiag\
reate Shortcut: C:\Documents and Settings\luis\Start Menu\Programs\NavDiag\Navini Diagnostics.lnk
reate Shortcut: C:\Documents and Settings\luis\Start Menu\Programs\NavDiag\Uninstall.lnk
stall Directory: C:\Documents and Settings\luis\Desktop\
- Directory already existed
reate Shortcut: C:\Documents and Settings\luis\Desktop\Navini Diagnostics.lnk
Install File:
Install File: C:\Program Files\Nav
Status: SUCCESSFUL
Install File: C:\Program Files\NavDiag\data
Status: SUCCESSFUL
Install File: C:\Program Files\NavDiag\data\lib\jcommon-0.8.8.jar
S
Install File: C:\Program Files\NavDiag\data\lib\log4j.jar
Install Directory: C:\Program Files\N
Install D
Status: SUCCESSFUL
Install File: C:\Program Files\NavDiag\config\NavDiag.lcf
Status: SUCCESSFUL
In
Status: SUCCESSFUL
C
Status: SUCCESSFUL
C
Status: SUCCESSFUL
In
Status: SUCCESSFUL
Additional Notes: NOTE
C
Status: SUCCESSFUL
36
050801_pv1.5_Ripwave-MX Modem User Guide_40-00097-00j(4.3.1) 3636
Navini Networks, Inc. Ripwave-MX Modem User Guide
EnADDENDUM 2: d User Software License Agreement
between
Buyer
ARTICLE 1
.1 Act of Assent.
Navini Networks, Inc.
and
IMPORTANT MESSAGE
1 Installing the Software indicates that you have read, understand and accept this
ARTICLE 2
License Agreement.
LICENSES
2.1 Grant of License. The Software and related Documentation, are the intellectual property of Navini
tected by law. Navini Networks, Inc. grants to Buyer a persoNetworks, Inc. and are pro
nonexclusive, nontransferable worldwide license, for revocable use (as perm
nal,
itted herein) of the
ions of this License Agreement and the Master Supply
ttached. Buyer is permitted to install and use the Software on its
server, but only in conjunction with the Navini Hardware. Buyer is not permitted to rent, sell or
rties.
Software based on the terms and condit
Agreement to which it is a
otherwise transfer the Software to any third pa
.2 Ownership Rights. Under this Agreement, Buyer does not acquire any rights of ownership in the
eleases and versions licensed by Navini
rsuant to this License Agreement, whether in printed or machine-
readable format. Buyer acquires only the right to use the Software and related Documentation
nt. Buyer promises to keep the Software in
of Navini Networks, Inc. and agrees to destroy or return the Software
sing the Software or upon termination or
e Agreement for any reason.
.3 Backup Copies
2
Software and related Documentation and subsequent r
Networks, Inc. to Buyer pu
subject to the terms and conditions of this Agreeme
confidence for the benefit
and all copies at such time as Buyer chooses to cease u
cancellation of this Licens
2. Buyer may copy the Software for safekeeping (archival) or backup purposes,
ject to the provisions of this License
ded that each copy shall include in readable format any and all
arkings contained in the original.
provided that all such copies of the Software are sub
Agreement, and also provi
confidential, proprietary, and copyright notices or m
2.4 Assignment. The rights granted in this License Agreement are restricted for use solely by Buyer
and may not be assigned, transferred, or sublicensed, however Buyer may grant access to its
d to make use of the Software in the form in
er solely for Buyer’s own computer server location. Buyer represents
s not expressly delineated in this
ply with all export, re-export, and other
laws in its use of the Software.
server to End-Users. Each Buyer shall be authorize
which it is provided to Buy
that it will not use the Software for any purpose that i
r represents that it will comAgreement. Further Buye
37
050801_pv1.5_Ripwave-MX Modem User Guide_40-00097-00j(4.3.1) 3737
Navini Networks, Inc. Ripwave-MX Modem User Guide
2.5 Suitability.
rmining which software best suits Buyer’s needs, for
ting the Software, and for the results obtained. Accordingly, each
d evaluate the Software’s capabilities before making
ut licensing the software.
b. Navini Networks, Inc. makes no representation that the Software conforms to or satisfies
ncouraged to engage professional assistance
engineers to evaluate the suitability of the Software for Buyer’s use.
oftware is suitable for Buyer’s intended
a. Buyer alone is responsible for dete
installing and opera
Buyer should determine its needs, an
a final decision abo
any federal, state, or local laws. Buyer is e
from attorneys and
c. Navini Networks, Inc. makes no claims that the S
purposes.
2.6 Remote Digital Access. Navini Networks, Inc. reserves the right, but is not obligated to digitally
purposes of upgrading and maintaining the Software. access the Software for the
2.7 U.S. GOVERNMENT RESTRICTED RIGHTS. All Software provided to the U.S. Government
ued on or after December 1, 1995 is provided with the commercial
license rights and restrictions described elsewhere herein. All Software provided to the U.S.
d prior to December 1, 1995 is provided with
ided for in FAR, 48 CFR 52.227-14 (June 1987) or DFAR, 48 CFR
TRADE SECRETS
pursuant to solicitations iss
Government pursuant to solicitations issue
“Restricted Rights” as prov
252.227-7013 (Oct 1988), as applicable
ARTICLE 3
3.1 Trade Secret. Navini Networks, Inc. considers the licensed Software covered by this License
Agreement to be a trade secret. Navini Networks, Inc. does not disclose any information to
ny design,
w-how gained by access to the Software to Licensor’s competitors.
oftware to develop a
acknowledge, understand and agree, constitute a material breach of this License Agreement.
Navini Networks, Inc. competitors or potential competitors. Buyer shall not disclose a
code, or technological kno
Buyer shall not use design, code, or documentation gained by access to the S
peting software product. To attempt to or to do so, the Parties similar technology or a com
3.2 Third Party Intellectual Property. Buyer acknowledges, understands and agrees that the licensed
Copyright, Patent and other laws protect Third
therwise bundled with the
promises to keep such Third Party Intellectual Property in confidence
to the benefit of the Third Party, agrees not to reverse engineer or otherwise decompile Third
Party Intellectual Property, and agrees to stop using, destroy and/or return such Third Party
owned Intellectual Property under the same terms and conditions as the licensed Software as set
forth in this License Agreement.
Software covered by this License Agreement may contain Intellectual Property owned by Third
Parties and duly licensed to Navini Networks, Inc.
Party Intellectual Property manufactured with, marketed with, or o
licensed Software. Buyer
38
050801_pv1.5_Ripwave-MX Modem User Guide_40-00097-00j(4.3.1) 3838
Navini Networks, Inc. Ripwave-MX Modem User Guide
ARTICLE 4
4.1 Intellectual Property Indemnifica
INDEMNIFICATIONS AND WARRANTY
tion; Entire Liability. ARTICLE 15 OF THE SUPPLY
AGREEMENT TO WHICH THIS AGREEMENT IS ATTACHED STATES THE ENTIRE
LIABILITY OF NAVINI NETWORKS, I TH RESPECT TO INFRINGEMENT OF
COPYRIGHTS, TRADE SECRETS, TRADEMARKS, PATENTS, AND OTHER
INTELLECTUAL PROPERTY RIGHTS BY THE LICENSED SOFTWARE,
DOCUMENTATION, OR ANY PARTS THEREOF, AND NAVINI NETWORKS, INC.
SHALL HAVE NO ADDITION SPECT TO ANY ALLEGED OR
PROVEN INFRINGEMENT.
NC. WI
AL LIABILITY WITH RE
4.2 Warranty. EXCEPT AS GRANTED IN THE BODY OF THE SUPPLY AGREEMENT TO
WHICH THIS LICENSE AGREEMENT IS ATTACHED, THE LICENSED SOFTWARE IS
PROVIDED BY NAVINI NETWORKS, INC. “AS IS” AND WITHOUT WARRANTY OF
ANY KIND OR NATURE, WRITTEN OR ORAL, EXPRESS OR IMPLIED, INCLUDING
(WITHOUT LIMITATION) THE IMP ANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE. THIS LIMITATION OF WARRANTIES WAS A
LIED WARR
MATERIAL FACTOR IN THE ESTABLISHMENT OF THE LICENSE FEE CHARGED FOR
EACH SPECIFIC ITEM OF SOFTWARE LICENSED.
ARTICLE 5
LIMITATION OF LIABILITY
5.1 Consequential Damages. TO THE MAXIMUM EXTENT PERMITTED BY THE APPLICABLE
LAW, IN NO EVENT SHALL NAVINI NETWORKS, INC. OR ANY THIRD PARTY
INVOLVED IN THE CREATION, PRODUCTION, DELIVERY, OR LICENSING OF THE
SOFTWARE BE LIABLE FOR ANY LOST REVENUES, PROFITS OR DATA OR OTHER
SPECIAL, INDIRECT, INCIDENTAL, CONSEQUENTIAL, OR PUNITIVE DAMAGES,
HOWEVER CAUSED AND REGARDLESS OF THEORY OF LIABILITY, EVEN IF NAVINI
NETWORKS, INC. HAS, OR SHOULD HAVE HAD ANY KNOWLEDGE, ACTUAL OR
CONSTRUCTIVE, OF THE POSSIBILITY OF SUCH DAMAGES.
5.2 License-Fee Limitation. Except for the indemnification provisions of Article 15, Navini
Networks, Inc.’s maximum liability for damages is limited to the license fees paid by Buyer un
this Agreement for the particular licensed Software that caused the damages.
der
5.3 Loss of Data. Software error can cause a significant loss of data. Navini Networks, Inc. shall not
be responsible for any loss of data. Navini Networks, Inc.’s responsibility is to correct the
Software error as provided in this License Agreement or the Supply Agreement to which it is
attached. It is Licensee’s responsibility to have adequate backup procedures to protect Buyer
from significant loss of valid data.
39
050801_pv1.5_Ripwave-MX Modem User Guide_40-00097-00j(4.3.1) 3939
Navini Networks, Inc. Ripwave-MX Modem User Guide
ARTICLE 6
OBJECT CODE ONLY-NO MODIFICATIONS
cations
6.1 Modifi . In order to maintain the “trade secret” status of the information contained in the
shall no
portion
and other license information. This information is placed in the object-code portions to prevent
unauthorized and unlicensed distributions of the Software. Buyer shall not subvert or change any
unless
6.2
Licensed Software, Navini Networks, Inc. provides the Software in object-code form only. Buyer
t modify, enhance, adapt, disassemble, translate, decompile or otherwise decode any
of the object code of the Software module. Buyer shall not use the Software without a
license to the Software object code. The object code contains the license number, date of license,
of this information. Further Buyer shall not make, full or partial, copies of any documentation
whether printed or machine- readable media supplied with the Licensed Software
expressly granted prior written permission by Navini Networks, Inc.
Responsibility for Damages. Buyer is subject to the provisions of the Supply Agreement with
respect to the Software (including Section 16). Buyer is fully liable and responsible for any
damages, indirect or direct, and costs that Navini Networks, Inc. may incur if Buyer appo
subcontractor who accesses the Software without Navini’s prior written consent. Buyer shall
defend, indemnify, and hold Navini Netw
ints a
orks, Inc., its directors, officers, employees, agents,
Authorized Partners, and other representatives harmless accordingly for all costs and direct and
indirect damages sustained by Navini Networks, Inc. However, if the subcontractor is pre-
approved by Navini in writing for access to the Software, then this Section shall not apply.
6.3 Copyright Notices. Buyer shall not remove any copyright or proprietary rights notice or
identification that indicates Navini Networks, Inc. ownership from any part of the licensed
ware
Copyri
All righ
Navini
tradem
tradem spective owners. Rev. 052302
Software, it being expressly understood and agreed that the existence of such copyright notice
should not be construed as an admission or presumption that publication of the licensed Soft
has occurred.
END OF AGREEMENT
ght © 2001-2005 Navini Networks, Inc.
ts reserved. Printed in the USA.
Networks is a registered trademark. Zero-Install, Ripwave, and Unwired by Navini are
arks of Navini Networks, Inc. Other product and company names mentioned herein may be
arks and/or service marks of their re
40
050801_pv1.5_Ripwave-MX Modem User Guide_40-00097-00j(4.3.1) 4040

Navigation menu