Cisco Systems 2500-PCM19-R3 PCMCIA card in BRS/EBS band User Manual Ripwave Modem User Guide
Cisco Systems, Inc PCMCIA card in BRS/EBS band Ripwave Modem User Guide
Contents
- 1. User Guide
- 2. User Manual
- 3. User Manual
User Guide
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 700780 |
| Application ID | ZNjnRyxPvZSPWcWTfhjMmg== |
| Document Description | User Guide |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 202.37kB (2529672 bits) |
| Date Submitted | 2006-09-01 00:00:00 |
| Date Available | 2006-11-30 00:00:00 |
| Creation Date | 2006-07-21 10:35:38 |
| Producing Software | Acrobat Distiller 6.0.1 (Windows) |
| Document Lastmod | 2006-09-01 09:43:44 |
| Document Title | Ripwave Modem User Guide |
| Document Creator | Acrobat PDFMaker 6.0 for Word |
| Document Author: | M. Cox |
RipwaveTM MX PC Card (PMX) User’s Guide Part Number 40-00460-00R Revision A, Version 1.0, PV1.1 August 15, 2006 Proprietary All information disclosed by this document is the proprietary property of Navini Networks, Inc. and is protected by copyright, trademark, and/or trade secret laws. All rights therein are expressly reserved. Navini Networks, Inc. Ripwave MX PC Card (PMX) User’s Guide TABLE OF CONTENTS PERMISSIONS, TRADEMARKS & DISTRIBUTION.............................................................................4 SAFETY .......................................................................................................................................................5 REGULATORY INFORMATION ..............................................................................................................6 INTRODUCTION.......................................................................................................................................7 PMX MODELS ...........................................................................................................................................7 MINIMUM COMPUTING REQUIREMENTS ......................................................................................7 PHYSICAL CHARACTERISTICS ..........................................................................................................8 INSTALLING YOUR PMX.......................................................................................................................9 ACCESSING THE INTERNET..............................................................................................................11 REMOVING YOUR PMX.......................................................................................................................12 INDICATOR LIGHT ...............................................................................................................................13 TROUBLESHOOTING ...........................................................................................................................14 INSTALLING NAVINI DIAGNOSTICS (NAVDIAG) ........................................................................14 TROUBLESHOOTING USING NAVINI DIAGNOSTICS.................................................................18 TROUBLESHOOTING USING NAVINI DIAGNOSTICS, CONTINUED ......................................19 THE ICONS ...............................................................................................................................................19 THE SIGNAL STRENGTH AND SIGNAL QUALITY BARS ...........................................................19 THE SIGNAL STRENGTH AND SIGNAL QUALITY BARS ...........................................................20 HOW TO INCREASE THE STRENGTH AND QUALITY OF THE SIGNAL ..........................................................21 THE HISTORY GRAPHS .............................................................................................................................21 THE PARAMETERS ....................................................................................................................................21 THE SCREEN OPTION BUTTONS................................................................................................................22 THE CONFIGURATION SCREEN .................................................................................................................22 THE TREND ANALYSIS SCREEN................................................................................................................22 THE STATISTICS SCREEN..........................................................................................................................23 THE ABOUT SCREEN ................................................................................................................................24 THE HELP BUTTON ..................................................................................................................................24 UNINSTALLING NAVINI DIAGNOSTICS SOFTWARE .................................................................24 OPTIONAL DESKTOP ANTENNA ......................................................................................................26 CONNECTING THE DESKTOP ANTENNA ....................................................................................................26 DISCONNECTING THE DESKTOP ANTENNA ...............................................................................................27 CARE AND MAINTENANCE................................................................................................................28 Page 2 060815_pv1.1_Ripwave MX PC Card (PMX) User’s Guide_40-00460-00Ra(4.5) Navini Networks, Inc. Ripwave MX PC Card (PMX) User’s Guide UPGRADING THE PMX ........................................................................................................................28 ADDENDUM 1: PMX - PC TROUBLESHOOTING ...........................................................................30 ADDENDUM 2: END USER SOFTWARE LICENSE AGREEMENT.............................................34 Page 3 060815_pv1.1_Ripwave MX PC Card (PMX) User’s Guide_40-00460-00Ra(4.5) Navini Networks, Inc. Ripwave MX PC Card (PMX) User’s Guide Permissions, Trademarks & Distribution Copyright© 2006, Navini Networks, Inc. All information contained herein and disclosed by this document is confidential and the proprietary property of Navini Networks, Inc. and all rights therein are expressly reserved. Acceptance of this material signifies agreement by the recipient that the information contained in this document is confidential and that it will be used solely for the purposes set forth herein. Acceptance of this material signifies agreement by the recipient that it will not be used, reproduced in whole or in part, disclosed, distributed, or conveyed to others in any manner or by any means – graphic, electronic, or mechanical, including photocopying, recording, taping, or information storage and retrieval systems – without the express written permission of Navini Networks, Inc. Navini Networks and Ripwave are registered trademarks. The Navini Networks logo, Smart WiMax, Zero-Install, and Unwired by Navini are trademarks of Navini Networks, Inc. Other product and company names mentioned herein may be trademarks and/or service marks of their respective owners. Except for the hardware warranty, nothing herein constitutes any representation, warranty, assurance, or guaranty of any kind. Because of continuing developments and improvements in design, manufacturing, and deployment, material in this document is subject to change without notification and does not represent any commitment or obligation on the part of Navini Networks, Inc. Navini Networks, Inc. shall have no liability for any error or damages resulting from the use of this document. All Navini Networks logos and trademarks are the property of Navini Networks, Inc. Unauthorized usage is strictly prohibited without the express written permission of Navini Networks, Inc. © 2006 Navini Networks, Inc. All rights reserved. Page 4 060815_pv1.1_Ripwave MX PC Card (PMX) User’s Guide_40-00460-00Ra(4.5) Navini Networks, Inc. Ripwave MX PC Card (PMX) User’s Guide Safety To optimize safety and expedite installation and service, read this document thoroughly. Follow all warnings, cautions, and instructions marked on the equipment and included in this document. To aid in the prevention of injury and damage to property, cautionary symbols have been placed in this document to alert the reader to known potentially hazardous situations, or hazards to equipment or procedures. The symbols are placed before the information to which they apply. However, any situation that involves heavy equipment and electricity can become hazardous, and caution and safety should be practiced at all times when installing, servicing, or operating the equipment. Caution Symbol - possible equipment or property damage. Warning Symbol - could cause personal injury or otherwise be hazardous to your health Navini Networks, Inc., expressly requires that when using Navini electronic equipment always follow the basic safety precautions to reduce the risk of electrical shock, fire, and injury to people and/or property. 1. Follow all warnings and instructions that come with the equipment. 2. Do not use the equipment while you are in a bathtub, shower, pool, or spa. Exposure of the equipment to water could cause severe electrical shock or serious damage to the equipment. 3. Do not allow any type of liquid to come in contact with the equipment. Unplug the equipment from the power source before cleaning. Use a damp cloth for cleaning. Do not use any soaps or liquid cleaners. 4. Follow all airport and FAA regulations when using the equipment on or near aircraft. 5. Do not use the PMX near medical equipment, life support equipment, or any equipment that may be susceptible to any form of radio interference. In such areas, the PMX must be powered off. 6. The driver or operator of any vehicle should not operate the PMX while in control of a vehicle. Doing so will detract from the driver or operator’s control and operation of the vehicle. 7. Do not disassemble the equipment. Removing covers exposes dangerous voltages or other risks and also voids the warranty. Incorrect reassembly can cause equipment damage or electrical shock. Only an authorized repair technician should service this product. 8. Do not expose the equipment to extreme hot or cold temperatures. 9. Do not use the equipment under the following conditions: • When the equipment has been exposed to water or moisture. • When the equipment has been damaged. • When the equipment does not operate properly or shows a distinct change in performance. Page 5 060815_pv1.1_Ripwave MX PC Card (PMX) User’s Guide_40-00460-00Ra(4.5) Navini Networks, Inc. Ripwave MX PC Card (PMX) User’s Guide Regulatory Information This Ripwave MX PC Card (PMX) has been tested with a typical laptop computer with a side loading PCMCIA bay. This PMX must not be co-located or operated in conjunction with any antenna (other than the one furnished by Navini and included in the package) or transmitter. Use of this device in any other configuration may exceed the FCC, ETSI, or other regulatory bodies RF Exposure compliance limit. If this equipment causes interference to radio or television reception, which can be determined by turning the equipment off and on, the user should try to correct the interference by one or more of the following measures: 1) Reorient or relocate the receiving antenna, 2) Increase the separation between the equipment and the receiver, 3) Consult the dealer or an experienced radio technician for additional suggestions. FCC guidelines stipulate that the antenna should be more than 2.5 cm (1”) from bystanders and 1.2 cm (0.472”) from the user. When in use, the antenna should be pointed vertically upward. When using the Desktop Antenna with the PMX, a minimum distance of 20 centimeters (8 inches) is required from the user or bystander. This product conforms with the Australian Standard for Human Exposure to Radiation at a distance of 2.5 cm. Closer contact, such as touching the aerial will result in radiation in excess of safe limits. SAR, or Specific Absorption Rate, is the measurement for the rate at which electromagnetic energy is absorbed by the human body during exposure. The FCC states the body SAR limit is 1.6 W/kg. The highest reported SAR value for the PMX card is 0.560 W/kg. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • • • Re-orient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Page 6 060815_pv1.1_Ripwave MX PC Card (PMX) User’s Guide_40-00460-00Ra(4.5) Navini Networks, Inc. Introduction Ripwave MX PC Card (PMX) User’s Guide Congratulations! Your Ripwave MX PC Card (PMX) is a userfriendly, easy-to-install device that helps you connect wirelessly to the Internet using the PCMCIA port on your laptop computer. The PMX can work with today’s MC-SCDMA technology and the OFDM-based 802.16e technology that Navini will trial late 2006. The PMX provides complete broadband Internet access to residential and small office/home office (SOHO) users without the necessity of professional hardware installation. The PMX also provides portable Internet service. A computer with the PMX can be moved from room-to-room, location-to-location, or even city-to-city as long as there is coverage and appropriate reception in the area. This manual will guide you through the simple process of installing the PMX and its monitoring software. PMX Models Currently, the PMX comes in one model. However, other models will be introduced in the future. The model indicates the frequency the PMX will operate in (for example, 3.4 GHz). The frequency number appears on the PMX’s label. The current model is detailed in the table below. Model 2.3 GHz 2.5-2.6 GHz 3.4 GHz 3.5 GHz Minimum Computing Requirements (See, also, Addendum 1) Model Number 2305-2360 PMX 2.5-2.6 PMX 3410-3525 PMX 3475-3600 PMX Frequency Range MHz 2305-2360 2500-2686 3410-3525 3475 - 3600 Operating Band International Only EBS WLL WLL The following table lists the minimum requirements your computer should meet before connecting to the PMX. Operating System1: CPU: RAM: Hard Drive: Monitor: Windows 2000, Windows 2003, or Windows XP. It is assumed the latest Windows service pack is installed on the Operating System. Note: The PMX is not supported on MacIntosh systems or Linux/Unix systems. Pentium level or higher 32 MB or the Operating System minimum, whichever is greater 50 MB free disk space for the optional Navini Diagnostics software 256 colors, 800 x 600 resolution Page 7 060815_pv1.1_Ripwave MX PC Card (PMX) User’s Guide_40-00460-00Ra(4.5) Navini Networks, Inc. Ripwave MX PC Card (PMX) User’s Guide NOTE1: If you are going to upgrade your Operating System after loading the Navini Diagnostics software, you must first uninstall Navini Diagnostics prior to upgrading the OS. Otherwise, the PMX will continue to operate, but the Navini Diagnostics will not work. See Uninstall instructions in this Guide. Physical Characteristics The PMX fits into a standard Type II PCMCIA slot. A 68-pin connector resides on the end of the card that is inserted into the slot. The PMX 68-pin connector Two internal inverted-F antennas reside inside the PMX. All models also have an external antenna. Following is a picture of the external antenna in the upright position. To raise the antenna to its upright position, raise the antenna counterclockwise. Do not turn the antenna beyond its upright position. Page 8 060815_pv1.1_Ripwave MX PC Card (PMX) User’s Guide_40-00460-00Ra(4.5) Navini Networks, Inc. Installing Your PMX Ripwave MX PC Card (PMX) User’s Guide The following instructions explain how to install the PMX and its driver software on your computer. Please read all instructions before attempting the installation. Note: The laptop should be used preferably on a desk when the PMX is installed. Using the laptop with the PMX close to the body, such as on the lap, is undesirable. Note: The screenshots shown in these instructions were taken from a laptop operating with Windows 2000. If you have a Windows XP operating system, the screens you see may vary from the screens shown in the instructions. Step Action Illustration 1. Insert the PMX into the Type II card slot on your computer. Be sure to insert the end that has the 68-pin connector into the card slot. 2. Raise the antenna to the upright position. Windows 2000 Screen 3. The Found New Hardware box appears indicating the PC sees the PMX. 4. The Welcome to the Found New Hardware Wizard dialog box appears. Click Next to continue. Windows 2000 Screen Page 9 060815_pv1.1_Ripwave MX PC Card (PMX) User’s Guide_40-00460-00Ra(4.5) Navini Networks, Inc. Installing Your PMX, continued Ripwave MX PC Card (PMX) User’s Guide Step Action 5. The Install Hardware Device Drivers box appears. Select ‘Search for a suitable driver for my device (recommended).’ Click Next to continue. Illustration Windows 2000 Screen 6. The Locate Driver Files box appears. Select ‘CD ROM.’ Insert the Installation CD into the computer’s CD-ROM drive. Click Next to continue. Windows 2000 Screen 7. The Driver Files Search Results box appears. Click Next to install the driver. Windows 2000 Screen Page 10 060815_pv1.1_Ripwave MX PC Card (PMX) User’s Guide_40-00460-00Ra(4.5) Navini Networks, Inc. Installing Your PMX, continued Ripwave MX PC Card (PMX) User’s Guide Step Action Illustration Windows 2000 Screen 8. The Hardware Install box appears, along with a Digital Signature Not Found box. Click Yes on the Digital Signature Not Found box, and then click Yes on the Hardware Install box. If the sound is turned up on your computer, two beeps are heard. 9. Accessing the Internet Note: Windows 98, XP, or ME systems may show a screen stating the PCMCIA Adapter has not passed Windows Logo testing and asking if you want to continue installation. Select the option that continues the installation. After the files are copied, a Completing the Found New Hardware Wizard box appears indicating the driver installation is complete. Click Finish to close the Wizard. Windows 2000 Screen Now that your PMX is installed and your computer is on, you should be able to access the Internet (that is, assuming you have signed up with a Service Provider). To access the Internet, open the web browser that is installed on your computer, (for example, Netscape, Internet Explorer, etc.). Page 11 060815_pv1.1_Ripwave MX PC Card (PMX) User’s Guide_40-00460-00Ra(4.5) Navini Networks, Inc. Removing Your PMX Ripwave MX PC Card (PMX) User’s Guide Before you store your PC in a computer case, you should remove the PMX from the PC. Also, turn the antenna to its original down position. Leaving the PMX in the PC or the antenna in the upright position while storing the PC in a computer case may damage the PMX or the antenna. To properly remove the PMX from your computer, you must first stop the driver software. If you do not stop the driver software first, the following box will appear: To safely remove the PMX, click on the PMX icon indicated in the following illustration. Depending on your computer’s setup, this icon is probably located in the lower right-hand corner of your computer. Once you click on the icon, a list with one or more elements will appear. This list is dependent on the devices currently installed on your PC. For example: Removing Your PMX, continued Page 12 060815_pv1.1_Ripwave MX PC Card (PMX) User’s Guide_40-00460-00Ra(4.5) Navini Networks, Inc. Ripwave MX PC Card (PMX) User’s Guide Select Stop Navini Networks PCMCIA Adapter. Next, the Stop a Hardware Device dialog box appears. Click OK. You can now pull the PMX out of your computer. If the sound on your computer is turned on, you may hear a beep indicating the PMX was unplugged. Indicator Light An indicator light on the top of the PMX’s black encasement provides information about the PMX’s operation. When the light blinks, the PMX is trying to synchronize with a BTS. When the light is solid, the PMX has acquired synchronization with a Base Indicator Light Station. Page 13 060815_pv1.1_Ripwave MX PC Card (PMX) User’s Guide_40-00460-00Ra(4.5) Navini Networks, Inc. Ripwave MX PC Card (PMX) User’s Guide If you experience difficulties with your Internet connection after you have installed the PMX driver software, please review the Minimum Computing Requirements and Addendum 1. Ensure your computer meets those requirements. Also, review the installation procedures and ensure all steps were completed properly. If you are still experiencing difficulties, troubleshoot using the Navini Diagnostics (NavDiag) monitoring software or contact your Service Provider. Troubleshooting The NavDiag software assists you in solving connection problems and provides other valuable information. This software is provided on the Installation CD that came in your PMX package. This section explains how to install this software. Note: To install NavDiag on a Windows 2000, you must have administrative privileges. To check your account privileges, open your Control Panel. Double-click on the Users and Passwords symbol. You should see Administrator under the Users tab. Installing Navini Diagnostics (NavDiag) Note: The screenshots shown in the instructions were taken from a laptop with Windows 2000. If you have a Windows XP operating system, the screens you see may vary from the screens shown in the instructions. Step Action Illustration 1. Before installing the NavDiag software, shut down all programs, including anti-virus software programs. 2. Insert the Installation CD into the CD-ROM drive. 3. Open the CD by clicking on the My Computer icon. Double-click on the folder named Navini_Diagnostics. Page 14 060815_pv1.1_Ripwave MX PC Card (PMX) User’s Guide_40-00460-00Ra(4.5) Navini Networks, Inc. Installing NavDiag, continued Ripwave MX PC Card (PMX) User’s Guide Step Action Illustration 4. Double-click on the icon for the file navdiag_windows.exe*. Example Doubleclick this file. This will automatically start the installation of NavDiag. 5. The InstallAnywhere window appears. The progress bar indicates that InstallAnywhere has initialized. Windows 2000 Screen 6. The Navini Diagnostics Language screen appears* (see Note above). Select a language, and click OK to continue. Windows 2000 Screen Note: NavDiag may automatically attempt to match the language set on your PC under Regional Options. The language selection affects how NavDiag displays its screens. If you receive an error message concerning the language, click OK and NavDiag will default to English. At this time, NavDiag supports three languages: 1. English (U.S.), 2.Spanish (Spain), and 3. Dutch (Holland). Page 15 060815_pv1.1_Ripwave MX PC Card (PMX) User’s Guide_40-00460-00Ra(4.5) Navini Networks, Inc. Installing NavDiag, continued Ripwave MX PC Card (PMX) User’s Guide Step Action 7. The progress bar indicates the files are being installed. Illustration Windows 2000 Screen 8. The NavDiag Introduction screen appears. Click Next to continue. Windows 2000 Screen 9. The License Agreement screen appears. Read the Licensing Agreement. Select the I Accept option, and click Next to continue. Windows 2000 Screen If the License Agreement is not accepted, you cannot install the software. Page 16 060815_pv1.1_Ripwave MX PC Card (PMX) User’s Guide_40-00460-00Ra(4.5) Navini Networks, Inc. Installing NavDiag, continued Ripwave MX PC Card (PMX) User’s Guide Step Action Illustration Windows 2000 Screen 10. The Choose Install Folder screen appears. Enter the name of the folder where you wish to install the software. Click Next to continue. 11. 12. The default installation folder provided by the software is shown in the illustration. The Choose Shortcut Folder screen appears. Accept the default and click Next to continue. The Pre-Installation Summary screen appears. Review the contents for accuracy. Click Install to continue. Windows 2000 Screen Windows 2000 Screen For your installation and computer, this screen may have different information than what is shown in the illustration. Page 17 060815_pv1.1_Ripwave MX PC Card (PMX) User’s Guide_40-00460-00Ra(4.5) Navini Networks, Inc. Installing NavDiag, continued Ripwave MX PC Card (PMX) User’s Guide Step Action 13. The Installing screen will change as the application files are loaded. 14. Troubleshooting Using Navini Diagnostics At the Install Complete screen, click Done to close the window. Illustration Windows 2000 Screen Windows 2000 Screen To open the Navini Diagnostics software application, double-click on the Navini Diagnostics icon on your desktop. The Connection Status screen will open and display data if the PMX is in use. The screen will refresh live data every second. Page 18 060815_pv1.1_Ripwave MX PC Card (PMX) User’s Guide_40-00460-00Ra(4.5) Navini Networks, Inc. Ripwave MX PC Card (PMX) User’s Guide Troubleshooting Using Navini Diagnostics, continued The following sections describe the various parts of the Connection Status screen. The Icons The icons that appear on the top right side of the screen represent the PC, the connection between the PC and the Modem, the Modem, the connection between the Modem and the Base Station, and the Base Station to which the Modem is communicating. Check marks over the connections indicate working connections. Connection between Connection between Modem & Base Station PC & Modem PC Modem Base Station If the connection between the PC and the PMX or between the PMX and the Base Station is interrupted, an “X” is positioned over the corresponding icon. Page 19 060815_pv1.1_Ripwave MX PC Card (PMX) User’s Guide_40-00460-00Ra(4.5) Navini Networks, Inc. The Signal Strength and Signal Quality Bars Ripwave MX PC Card (PMX) User’s Guide Signal Strength and Signal Quality are dynamic bar areas that indicate how well your PMX is receiving signals from the Base Station. In particular, the Signal Strength bar area graphically represents the strength of the synchronization signal your Modem is receiving from BTS. The strength of the signal is represented by a group of colored bars. The higher the pile of bars goes, the stronger the signal is. The color of the bars also gives an indication of the strength of the signal. Green lines indicate an excellent signal. Orange lines indicate a good signal while red lines indicate a weak signal. The Signal Quality bar area graphically represents the Signal-toNoise Ratio (SNR) received by your Modem. Again, the quality of the signal is represented by a group of colored bars. The higher the pile of bars goes, the better the SNR of the signal. The color of the bars also gives an indication of the quality of the signal. Green lines indicate an excellent signal or an SNR greater than 21. Orange lines indicate a good signal or an SNR greater than or equal to 13 but less than or equal to 21. Red lines indicate a weak signal or an SNR less than 13. Page 20 060815_pv1.1_Ripwave MX PC Card (PMX) User’s Guide_40-00460-00Ra(4.5) Navini Networks, Inc. Ripwave MX PC Card (PMX) User’s Guide How to Increase the Strength and Quality of the Signal To increase the strength and quality of the signal, change the location of the PC in which the PMX is inserted. Try moving it closer to a window, to a higher location, away from other wireless devices (microwave ovens, cordless phones), and away from metal objects (shelves, file cabinets). As you reposition your PC, watch the Signal Strength and Quality bars on the NavDiag screen. Place your PC in the location where you receive the most green signal strength and quality bars. The History Graphs The History graphs plot the change in signal strength and signal quality over time. The graphs cover the last minute and are updated every second. Read the graphs from right to left. The right side of the graph represents the most recent status of your PMX. The Parameters At the bottom of the Connection Status screen are four parameters. These parameters are BTS ID, Network ID, Active SW Version, and Standby SW Version. The BTS ID indicates the BTS to which the PMX is currently synchronized. The Network ID indicates the network in which the PMX is operating. Active SW Version and Standby SW Version Page 21 060815_pv1.1_Ripwave MX PC Card (PMX) User’s Guide_40-00460-00Ra(4.5) Navini Networks, Inc. Ripwave MX PC Card (PMX) User’s Guide The Parameters, continued indicate the version number of the software currently loaded in the “active side” and “standby side” of the PMX’s flash memory. The two letters in parenthesis following the release number indicate the type of software load. JD indicates Joint Detection while EN indicates Enhanced Nulling. The Screen Option Buttons On the left-hand side of the screen, there are five screen option buttons: Connection Status, Configuration, Trend Analysis, Statistics, and About. Each of these screens provides unique capabilities. The Configuration Screen The Configuration screen enables you to update your PMX’s software if directed to do so by your Service Provider. To access the Configuration screen, press the Configuration button. If you must update your PMX’s software, your Service Provider will provide you with instructions regarding what to do. At the bottom of the screen is an Allow Customer Satisfaction Reporting box. This box currently is not supported on the PMX. The Trend Analysis Screen The Trend Analysis screen lets you view PMX parameters that evolve over time. With this screen, you can select up to three parameters to plot. To view the Trend Analysis screen, press the Trend Analysis button. Page 22 060815_pv1.1_Ripwave MX PC Card (PMX) User’s Guide_40-00460-00Ra(4.5) Navini Networks, Inc. Ripwave MX PC Card (PMX) User’s Guide The Trend Analysis Screen, continued By pressing the Plot Graph button, the following screen appears. This screen displays the value of the selected parameters over the last five minutes, updated once every second. The graphic scrolls from right to left. The Statistics Screen The Statistics screen lets you view the current value of selected parameters. These values are updated as they change over time. To view the Statistics screen, press the Statistics button. Page 23 060815_pv1.1_Ripwave MX PC Card (PMX) User’s Guide_40-00460-00Ra(4.5) Navini Networks, Inc. Ripwave MX PC Card (PMX) User’s Guide The About Screen The About screen provides vital information such as the version of the Navini Diagnostics software currently installed on your computer. It also provides a website address and telephone number where you can contact your Service Provider. To view the About screen, press the About button. The Help Button A Help button appears on the top right corner of all the NavDiag windows. The Help button gives you two options. The first option, On NavDiag, provides help text on the functionality of the NavDiag program. The second option, About NavDiag, is equivalent to clicking on the About icon. Uninstalling Navini Diagnostics Software If for some reason you need to uninstall the NavDiag software, e.g., to upgrade your Operating System software, follow the procedure below. Note: If you are going to upgrade your PC Operating System after loading the Navini Diagnostics software, you must first uninstall NavDiag prior to upgrading the OS. Otherwise, NavDiag will not work. Note: The screenshots shown in these instructions were taken from a laptop with Windows 2000. If you have a Windows XP operating system, the screens you see may vary from the screens shown in the instructions. Page 24 060815_pv1.1_Ripwave MX PC Card (PMX) User’s Guide_40-00460-00Ra(4.5) Navini Networks, Inc. Uninstalling NavDiag Software, continued Ripwave MX PC Card (PMX) User’s Guide Step Action 1. On your computer screen lower left corner, click on Start > Programs > NavDiag > Uninstall. Illustration 2. The Install-Anywhere Uninstaller screen appears. Click Uninstall. Windows 2000 Screen 3. The screen indicates the application files are uninstalled. Windows 2000 Screen 4. The Uninstall Complete screen appears when finished. Click on Quit to close the Uninstall screen. Windows 2000 Screen 5. Restart the PC to complete the uninstall process. This ensures the uninstall process completes successfully. Page 25 060815_pv1.1_Ripwave MX PC Card (PMX) User’s Guide_40-00460-00Ra(4.5) Navini Networks, Inc. Ripwave MX PC Card (PMX) User’s Guide An optional desktop antenna is available for the PMX. This antenna connects to the PMX and then sits on a surface next to the laptop. The laptop should be used preferably on a desk when the PMX is installed. Using the laptop with the PMX close to the body, such as on the lap, is undesirable. Optional Desktop Antenna This antenna should be used if optimal reception cannot be obtained through the PMX antenna. Following is a picture of the optional desktop antenna. Connecting the Desktop Antenna To connect the desktop antenna to the PMX, you must first remove the antenna attached to the PMX. To remove the antenna, turn the antenna down so that it is lying parallel with the PMX. Grasp the base of the antenna near its connection point and firmly pull the antenna away from the card. Do not grasp the top or middle of the antenna as it may break when you try to pull the antenna away. Once the PMX antenna is removed, connect the desktop antenna by inserting its connector into the port on the PMX. Page 26 060815_pv1.1_Ripwave MX PC Card (PMX) User’s Guide_40-00460-00Ra(4.5) Navini Networks, Inc. Ripwave MX PC Card (PMX) User’s Guide Connecting the Desktop Antenna, continued Insert the antenna into the base unit. Base Disconnecting the Desktop Antenna To disconnect the desktop antenna from the PMX, hold the connector at its connection point and gently pull the connector out of the card. Note: If a desktop antenna is required for optimal reception, avoid frequently connecting and disconnecting the desktop antenna from the PMX as frequent connection/disconnection may cause the connector on the desktop antenna to break. Page 27 060815_pv1.1_Ripwave MX PC Card (PMX) User’s Guide_40-00460-00Ra(4.5) Navini Networks, Inc. Care and Maintenance Ripwave MX PC Card (PMX) User’s Guide The PMX is designed to give you years of trouble-free service. To ensure operation, read the following care and maintenance instructions. Keep the PMX free of dust and moisture. If the PMX gets wet, use a towel to dry it immediately. Handle the PMX gently. Dropping it or mishandling it can cause damage to the metal/plastic shell or the electronic circuitry. Keep the PMX away from high temperatures. Heat can cause damage to the metal/plastic shell or the electronic circuitry. To clean the external areas of the PMX, use only an electrical contact cleaner that is non-conductible and a soft, damp, lintfree cloth. Do not use any chemicals or abrasives to clean the PMX. Also use caution around the connection pins. If there is a problem with the PMX, do not attempt to repair it yourself. Report the problem to your Service Provider. Do not apply adhesive labels to the PMX. This may cause the PMX to become jammed inside the card slot. The PMX should fit easily into the PC slot. Do not force the PMX into the PC slot. Forcing the PMX into the slot may cause damage to the connector pins. If you are going to upgrade your computer Operating System after loading the NavDiag software, you must first uninstall NavDiag prior to upgrading the OS. Otherwise, NavDiag will not work. See the Uninstall instructions in this Guide. Upgrading the PMX There are two different ways to upgrade the software that makes the PMX work. Your Service Provider may perform an over-the-air (OTA) upgrade, where the up-to-date software files are transferred wirelessly from a Base Station to your PMX. This method will normally be transparent to you; in other words, you should not experience any noticeable service interruption. Page 28 060815_pv1.1_Ripwave MX PC Card (PMX) User’s Guide_40-00460-00Ra(4.5) Navini Networks, Inc. Ripwave MX PC Card (PMX) User’s Guide You Service Provider may provide a downloadable web file or CD-ROM with software that is installed on your PC and used to upgrade the PMX software. This method is used only if the PMX was not inserted and “on” during the OTA upgrade process. If you must upgrade your software using this method, your Service Provider will give you instructions on what to do. This method takes a minimal amount of time to complete. Note: If you must upgrade the PMX Driver to the latest driver, Windows will tell you that the current driver is the latest driver. Ignore this message, and force Windows to update the driver. Page 29 060815_pv1.1_Ripwave MX PC Card (PMX) User’s Guide_40-00460-00Ra(4.5) Navini Networks, Inc. Ripwave MX PC Card (PMX) User’s Guide ADDENDUM 1: PMX - PC Troubleshooting - For Use With the Ripwave MX PC Card (PMX) & Navini Diagnostics Software PC Operating Systems Prior to installing the Navini Diagnostics (NavDiag) software, please check to ensure that the PC Operating System meets the criteria given in the table below. If these criteria are not met, unpredictable problems may occur as a result of installation. It is recommended that the user have the latest Windowsc updates installed prior to installing the NavDiag software. Operating System Win 2000 Win 2003 Win XP PMX Interface Supported Supported Supported Notes 1, 3 2, 3 Note 1: Internet Explorer 3.0 or higher is required Note 2: Requires Service Pack 1 Note 3: To load the NavDiag software, the user MUST have Administrative privileges. Results of Correct NavDiag Installation Experienced PC users can check the results of the Navini Diagnostics installation by looking at the log file that is created during the installation process. The log file is named “Ripwave_Diagnostics_InstallLog.log.” It is located under c:\Program Files\Navini Diagnostics. ------Install Begin: Tue Jul 20 12:15:22 CDT 2004 Install End: Tue Jul 20 12:15:30 CDT 2004 Created with Zero G's InstallAnywhere 4.5.3 Enterprise Build 1394 Summary ------Installation: Successful with warnings. 2 SUCCESSES 1 WARNINGS 0 NONFATAL ERRORS 0 FATAL ERRORS Action Notes: None. Page 30 060815_pv1.1_Ripwave MX PC Card (PMX) User’s Guide_40-00460-00Ra(4.5) Navini Networks, Inc. Ripwave MX PC Card (PMX) User’s Guide Install Log Detail: Check Disk Space: C:\Program Files\NavDiag Status: SUCCESSFUL Additional Notes: NOTE - Required Disk Space: 29,363,315; Free Disk Space: 30,806,179,840 Install Directory: C:\Program Files\NavDiag\ Status: SUCCESSFUL Get Registry Entry: Key: HKEY_LOCAL_MACHINE\SOFTWARE\Navini Networks\NavDiag, ValueName: InstallDirectory Status: WARNING Additional Notes: WARNING - Win32Exception Make Registry Entry: Key: HKEY_LOCAL_MACHINE\SOFTWARE\Navini Networks, Value Name: , Value Data: Status: SUCCESSFUL Make Registry Entry: Key: HKEY_LOCAL_MACHINE\SOFTWARE\Navini Networks\NavDiag, Value Name: , Value Data: Status: SUCCESSFUL Make Registry Entry: Key: HKEY_LOCAL_MACHINE\SOFTWARE\Navini Networks\NavDiag, Value Name: InstallDirectory, Value Data: C:\Program Files\NavDiag Status: SUCCESSFUL Install Directory: C:\Program Files\NavDiag\Uninstall\ Status: SUCCESSFUL Install Uninstaller: Navini Diagnostics (Install All Uninstaller Components) Status: SUCCESSFUL Install Directory: C:\Program Files\NavDiag\jre Status: SUCCESSFUL Install File: C:\Program Files\NavDiag\Uninstall\Uninstall NavDiag.exe Status: SUCCESSFUL Install File: C:\Program Files\NavDiag\Uninstall\Uninstall NavDiag.lax Status: SUCCESSFUL Install Directory: C:\Program Files\NavDiag\Uninstall\resource\ Status: SUCCESSFUL Install File: C:\Program Files\NavDiag\Uninstall\resource\iawin32.dll Status: SUCCESSFUL Install File: C:\Program Files\NavDiag\Uninstall\resource\remove.exe Status: SUCCESSFUL Make Registry Entry: Key: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\Navini Diagnostics, Value Name: DisplayName, Value Data: Navini Diagnostics Status: SUCCESSFUL Page 31 060815_pv1.1_Ripwave MX PC Card (PMX) User’s Guide_40-00460-00Ra(4.5) Navini Networks, Inc. Ripwave MX PC Card (PMX) User’s Guide Make Registry Entry: Key: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\Navini Diagnostics, Value Name: UninstallString, Value Data: "C:\Program Files\NavDiag\Uninstall\Uninstall NavDiag.exe" Status: SUCCESSFUL Install Uninstaller: Navini Diagnostics (Install All Uninstaller Components) Status: SUCCESSFUL Create LaunchAnywhere: Navini Diagnostics.exe (Install All LaunchAnywhere Java Executable Components) Status: SUCCESSFUL Install File: C:\Program Files\NavDiag\Navini Diagnostics.exe Status: SUCCESSFUL Install File: C:\Program Files\NavDiag\Navini Diagnostics.lax Status: SUCCESSFUL Create LaunchAnywhere: Navini Diagnostics.exe (Install All LaunchAnywhere Java Executable Components) Status: SUCCESSFUL Install Directory: C:\Program Files\NavDiag\data\ Status: SUCCESSFUL Install Directory: C:\Program Files\NavDiag\data\images\ Status: SUCCESSFUL Install File: C:\Program Files\NavDiag\data\images\billboard.gif Status: SUCCESSFUL Install File: C:\Program Files\NavDiag\data\images\splash.gif Status: SUCCESSFUL Install File: C:\Program Files\NavDiag\data\images\buttonbar.gif Status: SUCCESSFUL Install File: C:\Program Files\NavDiag\data\images\about2.gif Status: SUCCESSFUL Install File: C:\Program Files\NavDiag\data\images\about1.gif Status: SUCCESSFUL Install File: C:\Program Files\NavDiag\data\images\about.gif Status: SUCCESSFUL Install File: C:\Program Files\NavDiag\data\images\uninstall.gif Status: SUCCESSFUL Install Directory: C:\Program Files\NavDiag\data\log\ Status: SUCCESSFUL Install Directory: C:\Program Files\NavDiag\data\lib\ Status: SUCCESSFUL Page 32 060815_pv1.1_Ripwave MX PC Card (PMX) User’s Guide_40-00460-00Ra(4.5) Navini Networks, Inc. Ripwave MX PC Card (PMX) User’s Guide Install File: C:\Program Files\NavDiag\data\lib\ctl.jar Status: SUCCESSFUL Install File: C:\Program Files\NavDiag\data\lib\navDiag.jar Status: SUCCESSFUL Install File: C:\Program Files\NavDiag\data\lib\jfreechart-0.9.13.jar Status: SUCCESSFUL Install File: C:\Program Files\NavDiag\data\lib\jcommon-0.8.8.jar Status: SUCCESSFUL Install File: C:\Program Files\NavDiag\data\lib\log4j.jar Status: SUCCESSFUL Install Directory: C:\Program Files\NavDiag\data\doc\ Status: SUCCESSFUL Install Directory: C:\Program Files\NavDiag\config\ Status: SUCCESSFUL Install File: C:\Program Files\NavDiag\config\NavDiag.lcf Status: SUCCESSFUL Install Directory: C:\Documents and Settings\luis\Start Menu\Programs\NavDiag\ Status: SUCCESSFUL Create Shortcut: C:\Documents and Settings\luis\Start Menu\Programs\NavDiag\Navini Diagnostics.lnk Status: SUCCESSFUL Create Shortcut: C:\Documents and Settings\luis\Start Menu\Programs\NavDiag\Uninstall.lnk Status: SUCCESSFUL Install Directory: C:\Documents and Settings\luis\Desktop\ Status: SUCCESSFUL Additional Notes: NOTE - Directory already existed Create Shortcut: C:\Documents and Settings\luis\Desktop\Navini Diagnostics.lnk Status: SUCCESSFUL Page 33 060815_pv1.1_Ripwave MX PC Card (PMX) User’s Guide_40-00460-00Ra(4.5) Navini Networks, Inc. Ripwave MX PC Card (PMX) User’s Guide ADDENDUM 2: End User Software License Agreement between Navini Networks, Inc. and Buyer ARTICLE 1 IMPORTANT MESSAGE 1.1 Act of Assent. Installing the Software indicates that you have read, understand and accept this License Agreement. ARTICLE 2 LICENSES 2.1 2.2 2.3 2.4 Grant of License. The Software and related Documentation, are the intellectual property of Navini Networks, Inc. and are protected by law. Navini Networks, Inc. grants to Buyer a personal, nonexclusive, nontransferable worldwide license, for revocable use (as permitted herein) of the Software based on the terms and conditions of this License Agreement and the Master Supply Agreement to which it is attached. Buyer is permitted to install and use the Software on its server, but only in conjunction with the Navini Hardware. Buyer is not permitted to rent, sell or otherwise transfer the Software to any third parties. Ownership Rights. Under this Agreement, Buyer does not acquire any rights of ownership in the Software and related Documentation and subsequent releases and versions licensed by Navini Networks, Inc. to Buyer pursuant to this License Agreement, whether in printed or machine-readable format. Buyer acquires only the right to use the Software and related Documentation subject to the terms and conditions of this Agreement. Buyer promises to keep the Software in confidence for the benefit of Navini Networks, Inc. and agrees to destroy or return the Software and all copies at such time as Buyer chooses to cease using the Software or upon termination or cancellation of this License Agreement for any reason. Backup Copies. Buyer may copy the Software for safekeeping (archival) or backup purposes, provided that all such copies of the Software are subject to the provisions of this License Agreement, and also provided that each copy shall include in readable format any and all confidential, proprietary, and copyright notices or markings contained in the original. Assignment. The rights granted in this License Agreement are restricted for use solely by Buyer and may not be assigned, transferred, or sublicensed, however Buyer may grant access to its server to End-Users. Each Buyer shall be authorized to make use of the Software in the form in which it is provided to Buyer solely for Buyer’s own computer server location. Buyer represents that it will not use the Software for any purpose that is not expressly delineated in this Agreement. Further Buyer represents that it will comply with all export, re-export, and other laws in its use of the Software. Page 34 060815_pv1.1_Ripwave MX PC Card (PMX) User’s Guide_40-00460-00Ra(4.5) Navini Networks, Inc. Ripwave MX PC Card (PMX) User’s Guide 2.5 Suitability. a. Buyer alone is responsible for determining which software best suits Buyer’s needs, for installing and operating the Software, and for the results obtained. Accordingly, each Buyer should determine its needs, and evaluate the Software’s capabilities before making a final decision about licensing the software. b. Navini Networks, Inc. makes no representation that the Software conforms to or satisfies any federal, state, or local laws. Buyer is encouraged to engage professional assistance from attorneys and engineers to evaluate the suitability of the Software for Buyer’s use. c. Navini Networks, Inc. makes no claims that the Software is suitable for Buyer’s intended purposes. 2.6 Remote Digital Access. Navini Networks, Inc. reserves the right, but is not obligated to digitally access the Software for the purposes of upgrading and maintaining the Software. U.S. GOVERNMENT RESTRICTED RIGHTS. All Software provided to the U.S. Government pursuant to solicitations issued on or after December 1, 1995 is provided with the commercial license rights and restrictions described elsewhere herein. All Software provided to the U.S. Government pursuant to solicitations issued prior to December 1, 1995 is provided with “Restricted Rights” as provided for in FAR, 48 CFR 52.227-14 (June 1987) or DFAR, 48 CFR 252.227-7013 (Oct 1988), as applicable 2.7 ARTICLE 3 TRADE SECRETS 3.1 3.2 Trade Secret. Navini Networks, Inc. considers the licensed Software covered by this License Agreement to be a trade secret. Navini Networks, Inc. does not disclose any information to Navini Networks, Inc. competitors or potential competitors. Buyer shall not disclose any design, code, or technological know-how gained by access to the Software to Licensor’s competitors. Buyer shall not use design, code, or documentation gained by access to the Software to develop a similar technology or a competing software product. To attempt to or to do so, the Parties acknowledge, understand and agree, constitute a material breach of this License Agreement. Third Party Intellectual Property. Buyer acknowledges, understands and agrees that the licensed Software covered by this License Agreement may contain Intellectual Property owned by Third Parties and duly licensed to Navini Networks, Inc. Copyright, Patent and other laws protect Third Party Intellectual Property manufactured with, marketed with, or otherwise bundled with the licensed Software. Buyer promises to keep such Third Party Intellectual Property in confidence to the benefit of the Third Party, agrees not to reverse engineer or otherwise decompile Third Party Intellectual Property, and agrees to stop using, destroy and/or return such Third Party owned Intellectual Property under the same terms and conditions as the licensed Software as set forth in this License Agreement. Page 35 060815_pv1.1_Ripwave MX PC Card (PMX) User’s Guide_40-00460-00Ra(4.5) Navini Networks, Inc. Ripwave MX PC Card (PMX) User’s Guide ARTICLE 4 INDEMNIFICATIONS AND WARRANTY 4.1 4.2 Intellectual Property Indemnification; Entire Liability. ARTICLE 15 OF THE SUPPLY AGREEMENT TO WHICH THIS AGREEMENT IS ATTACHED STATES THE ENTIRE LIABILITY OF NAVINI NETWORKS, INC. WITH RESPECT TO INFRINGEMENT OF COPYRIGHTS, TRADE SECRETS, TRADEMARKS, PATENTS, AND OTHER INTELLECTUAL PROPERTY RIGHTS BY THE LICENSED SOFTWARE, DOCUMENTATION, OR ANY PARTS THEREOF, AND NAVINI NETWORKS, INC. SHALL HAVE NO ADDITIONAL LIABILITY WITH RESPECT TO ANY ALLEGED OR PROVEN INFRINGEMENT. Warranty. EXCEPT AS GRANTED IN THE BODY OF THE SUPPLY AGREEMENT TO WHICH THIS LICENSE AGREEMENT IS ATTACHED, THE LICENSED SOFTWARE IS PROVIDED BY NAVINI NETWORKS, INC. “AS IS” AND WITHOUT WARRANTY OF ANY KIND OR NATURE, WRITTEN OR ORAL, EXPRESS OR IMPLIED, INCLUDING (WITHOUT LIMITATION) THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THIS LIMITATION OF WARRANTIES WAS A MATERIAL FACTOR IN THE ESTABLISHMENT OF THE LICENSE FEE CHARGED FOR EACH SPECIFIC ITEM OF SOFTWARE LICENSED. ARTICLE 5 LIMITATION OF LIABILITY 5.1 5.2 5.3 Consequential Damages. TO THE MAXIMUM EXTENT PERMITTED BY THE APPLICABLE LAW, IN NO EVENT SHALL NAVINI NETWORKS, INC. OR ANY THIRD PARTY INVOLVED IN THE CREATION, PRODUCTION, DELIVERY, OR LICENSING OF THE SOFTWARE BE LIABLE FOR ANY LOST REVENUES, PROFITS OR DATA OR OTHER SPECIAL, INDIRECT, INCIDENTAL, CONSEQUENTIAL, OR PUNITIVE DAMAGES, HOWEVER CAUSED AND REGARDLESS OF THEORY OF LIABILITY, EVEN IF NAVINI NETWORKS, INC. HAS, OR SHOULD HAVE HAD ANY KNOWLEDGE, ACTUAL OR CONSTRUCTIVE, OF THE POSSIBILITY OF SUCH DAMAGES. License-Fee Limitation. Except for the indemnification provisions of Article 15, Navini Networks, Inc.’s maximum liability for damages is limited to the license fees paid by Buyer under this Agreement for the particular licensed Software that caused the damages. Loss of Data. Software error can cause a significant loss of data. Navini Networks, Inc. shall not be responsible for any loss of data. Navini Networks, Inc.’s responsibility is to correct the Software error as provided in this License Agreement or the Supply Agreement to which it is attached. It is Licensee’s responsibility to have adequate backup procedures to protect Buyer from significant loss of valid data. Page 36 060815_pv1.1_Ripwave MX PC Card (PMX) User’s Guide_40-00460-00Ra(4.5) Navini Networks, Inc. Ripwave MX PC Card (PMX) User’s Guide ARTICLE 6 OBJECT CODE ONLY-NO MODIFICATIONS 6.1 6.2 6.3 Modifications. In order to maintain the “trade secret” status of the information contained in the Licensed Software, Navini Networks, Inc. provides the Software in object-code form only. Buyer shall not modify, enhance, adapt, disassemble, translate, decompile or otherwise decode any portion of the object code of the Software module. Buyer shall not use the Software without a license to the Software object code. The object code contains the license number, date of license, and other license information. This information is placed in the object-code portions to prevent unauthorized and unlicensed distributions of the Software. Buyer shall not subvert or change any of this information. Further Buyer shall not make, full or partial, copies of any documentation whether printed or machinereadable media supplied with the Licensed Software unless expressly granted prior written permission by Navini Networks, Inc. Responsibility for Damages. Buyer is subject to the provisions of the Supply Agreement with respect to the Software (including Section 16). Buyer is fully liable and responsible for any damages, indirect or direct, and costs that Navini Networks, Inc. may incur if Buyer appoints a subcontractor who accesses the Software without Navini’s prior written consent. Buyer shall defend, indemnify, and hold Navini Networks, Inc., its directors, officers, employees, agents, Authorized Partners, and other representatives harmless accordingly for all costs and direct and indirect damages sustained by Navini Networks, Inc. However, if the subcontractor is pre-approved by Navini in writing for access to the Software, then this Section shall not apply. Copyright Notices. Buyer shall not remove any copyright or proprietary rights notice or identification that indicates Navini Networks, Inc. ownership from any part of the licensed Software, it being expressly understood and agreed that the existence of such copyright notice should not be construed as an admission or presumption that publication of the licensed Software has occurred. END OF AGREEMENT Copyright © 2004-2006 Navini Networks, Inc. All rights reserved. Printed in the USA. Navini Networks is a registered trademark. Zero-Install, Ripwave, and Unwired by Navini are trademarks of Navini Networks, Inc. Other product and company names mentioned herein may be trademarks and/or service marks of their respective owners. Rev. 052302 Page 37 060815_pv1.1_Ripwave MX PC Card (PMX) User’s Guide_40-00460-00Ra(4.5)
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Tagged PDF : Yes XMP Toolkit : 3.1-702 About : uuid:e08b2bed-6baa-4a3f-921d-200de264319a Producer : Acrobat Distiller 6.0.1 (Windows) Comments : Preliminary Release 4.4.2 Category : Modem Company : Navini Networks Manager : Sharon Redfoot Source Modified : D:20060721153446 Creator Tool : Acrobat PDFMaker 6.0 for Word Modify Date : 2006:09:01 09:43:44-07:00 Create Date : 2006:07:21 10:35:38-05:00 Metadata Date : 2006:09:01 09:43:44-07:00 Document ID : uuid:1cb395ff-623f-4584-9632-60793319cab4 Instance ID : uuid:3eccc399-a5cc-4456-80e0-d10b8bba3313 Version ID : 2 Format : application/pdf Title : Ripwave Modem User Guide Creator : M. Cox Description : modem Subject : end-user; Ripwave; modem; cpe; unit; pc; IAD Headline : modem Page Count : 37 Author : M. Cox Keywords : end-user;, Ripwave;, modem;, cpe;, unit;, pc;, IADEXIF Metadata provided by EXIF.tools