Cisco Systems 62009015 802.11a/b/g/n MINI-PCI Module User Manual regulatory notice
Cisco Systems 802.11a/b/g/n MINI-PCI Module Users Manual regulatory notice
Contents
- 1. Users Manual regulatory notice
- 2. Users Manual
- 3. Users Manual regulatory notice
Users Manual regulatory notice
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1081163 |
| Application ID | bZR0VW9zFzZpmSOOUpWY7A== |
| Document Description | Users Manual regulatory notice |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 29.52kB (369015 bits) |
| Date Submitted | 2009-03-16 00:00:00 |
| Date Available | 2009-03-16 00:00:00 |
| Creation Date | 2008-04-03 11:05:44 |
| Producing Software | Adobe PDF Library 8.0 |
| Document Lastmod | 2009-03-12 18:17:10 |
| Document Title | Users Manual regulatory notice |
| Document Creator | Adobe Illustrator CS3 |
User Manual Meraki MR58 Trademarks Meraki, Meraki MR58 and Meraki Mesh are trademarks of Meraki, Inc. Other brand and product names are registered trademarks or trademarks of their respective holders. Statement of Conditions In the interest of improving internal design, operational function, and/ or reliability, Meraki reserves the right to make changes to the products described in this document without notice. Meraki does not assume any liability that may occur due to the use or application of the product(s) or circuit layout(s) described herein. Updated versions of this document may be available on the Web at http://www.meraki.com/. Warranty Meraki, Inc. provides a limited warranty on this product. Refer to your sales agreement to establish the terms of the limited warranty. U.S. Regulatory Wireless Notice Federal Communication Commission Interference Statement: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: • this device may not cause harmful interference, and • this device must accept any interference received, including interference that may cause undesired operation. FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 46 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. IEEE 802.11b or 802.11g operation of this product in the USA is firmware-limited to channels 1 through 11. Canadian Regulatory Wireless Notice This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions: • this device may not cause interference and • this device must accept any interference, including interference that may cause undesired operation of the device. IC Radiation Exposure Statement: This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 46 cm between the radiator and your body. This device is intended only for OEM integrators under the following conditions: • the antenna must be installed such that 46 cm is maintained between the antenna and users, and • the transmitter module may not be co-located with any other transmitter or antenna, • for all products market in US/IC, OEM has to limit the operation channels in CH1 to CH11 for 2.4G band by supplied firmware programming tool. OEM shall not supply any tool or info to the end-user regarding to Regulatory Domain change. As long as 3 conditions above are met, further transmitter test will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed (for example, digital device emissions, PC peripheral requirements, etc.). Important Note: In the event that these conditions can not be met (for example certain laptop configurations or co-location with another transmitter), then the FCC/IC authorization is no longer considered valid and the FCC/IC ID can not be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate FCC/IC authorization. End Product Labeling: This transmitter module is authorized only for use in device where the antenna may be installed such that 46 cm may be maintained between the antenna and users. The final end product must be labeled in a visible area with the following: “Contains FCC ID: UDX-62009015, IC ID: 6961A-62009015”. Manual Information To the End User: The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the user’s manual of the end product which integrates this module. The end user manual shall include all required regulatory information/warning as show in this manual.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 4.1-c036 46.277092, Fri Feb 23 2007 14:16:18 Instance ID : uuid:31d545a7-59a9-f145-8092-92d39448e090 Document ID : adobe:docid:indd:2cfae9f5-00ac-11dd-ac18-c3ca3df72bf3 Rendition Class : proof:pdf Derived From Instance ID : d2877297-fb30-11dc-9448-a15c5bf79ae4 Derived From Document ID : adobe:docid:indd:0546d74d-fb2a-11dc-9448-a15c5bf79ae4 Create Date : 2008:04:03 11:05:44-07:00 Modify Date : 2009:03:12 18:17:10-07:00 Metadata Date : 2009:03:12 18:17:10-07:00 Creator Tool : Adobe Illustrator CS3 Thumbnail Width : 200 Thumbnail Height : 256 Thumbnail Format : JPEG Thumbnail Image : (Binary data 13641 bytes, use -b option to extract) Format : application/pdf Producer : Adobe PDF Library 8.0 Trapped : False N Pages : 1 Has Visible Transparency : False Has Visible Overprint : False Max Page Size W : 612.000000 Max Page Size H : 792.000000 Max Page Size Unit : Points Font Name : Verdana, Verdana-Bold Font Family : Verdana, Verdana Font Face : Regular, Bold Font Type : Open Type, Open Type Font Version : Version 2.45, Version 2.45 Font Composite : False, False Font File Name : Verdana, Verdana Plate Names : PANTONE Cool Gray 9 U Swatch Group Name : Default Swatch Group Swatch Group Type : 0 Swatch Colorant Swatch Name : PANTONE Cool Gray 9 U Swatch Colorant Type : SPOT Swatch Colorant Tint : 100.000000 Swatch Colorant Mode : CMYK Swatch Colorant Cyan : 0.000000 Swatch Colorant Magenta : 0.999451 Swatch Colorant Yellow : 0.000000 Swatch Colorant Black : 50.999496 Has XFA : No Page Count : 4 Creator : Adobe Illustrator(R) 13.0 For : John Tso, Title : meraki_MR58_reg.pdf Bounding Box : 0 0 612 792 Container Version : 11 Creator Version : 13 Image Height : 792 Image Width : 612 Image Size : 612x792 Megapixels : 0.485EXIF Metadata provided by EXIF.tools
Users Manual regulatory notice
| Download: | |
| Mirror Download [FCC.gov] | |
| Document ID | 1081176 |
| Application ID | j+q0cLMkxVM1IRWnA/b/nA== |
| Document Description | Users Manual regulatory notice |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 29.52kB (369015 bits) |
| Date Submitted | 2009-03-16 00:00:00 |
| Date Available | 2009-03-16 00:00:00 |
| Creation Date | 2008-04-03 11:05:44 |
| Producing Software | Adobe PDF Library 8.0 |
| Document Lastmod | 2009-03-12 18:17:10 |
| Document Title | Users Manual regulatory notice |
| Document Creator | Adobe Illustrator CS3 |
User Manual Meraki MR58 Trademarks Meraki, Meraki MR58 and Meraki Mesh are trademarks of Meraki, Inc. Other brand and product names are registered trademarks or trademarks of their respective holders. Statement of Conditions In the interest of improving internal design, operational function, and/ or reliability, Meraki reserves the right to make changes to the products described in this document without notice. Meraki does not assume any liability that may occur due to the use or application of the product(s) or circuit layout(s) described herein. Updated versions of this document may be available on the Web at http://www.meraki.com/. Warranty Meraki, Inc. provides a limited warranty on this product. Refer to your sales agreement to establish the terms of the limited warranty. U.S. Regulatory Wireless Notice Federal Communication Commission Interference Statement: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: • this device may not cause harmful interference, and • this device must accept any interference received, including interference that may cause undesired operation. FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 46 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. IEEE 802.11b or 802.11g operation of this product in the USA is firmware-limited to channels 1 through 11. Canadian Regulatory Wireless Notice This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions: • this device may not cause interference and • this device must accept any interference, including interference that may cause undesired operation of the device. IC Radiation Exposure Statement: This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 46 cm between the radiator and your body. This device is intended only for OEM integrators under the following conditions: • the antenna must be installed such that 46 cm is maintained between the antenna and users, and • the transmitter module may not be co-located with any other transmitter or antenna, • for all products market in US/IC, OEM has to limit the operation channels in CH1 to CH11 for 2.4G band by supplied firmware programming tool. OEM shall not supply any tool or info to the end-user regarding to Regulatory Domain change. As long as 3 conditions above are met, further transmitter test will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed (for example, digital device emissions, PC peripheral requirements, etc.). Important Note: In the event that these conditions can not be met (for example certain laptop configurations or co-location with another transmitter), then the FCC/IC authorization is no longer considered valid and the FCC/IC ID can not be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate FCC/IC authorization. End Product Labeling: This transmitter module is authorized only for use in device where the antenna may be installed such that 46 cm may be maintained between the antenna and users. The final end product must be labeled in a visible area with the following: “Contains FCC ID: UDX-62009015, IC ID: 6961A-62009015”. Manual Information To the End User: The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the user’s manual of the end product which integrates this module. The end user manual shall include all required regulatory information/warning as show in this manual.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 4.1-c036 46.277092, Fri Feb 23 2007 14:16:18 Instance ID : uuid:31d545a7-59a9-f145-8092-92d39448e090 Document ID : adobe:docid:indd:2cfae9f5-00ac-11dd-ac18-c3ca3df72bf3 Rendition Class : proof:pdf Derived From Instance ID : d2877297-fb30-11dc-9448-a15c5bf79ae4 Derived From Document ID : adobe:docid:indd:0546d74d-fb2a-11dc-9448-a15c5bf79ae4 Create Date : 2008:04:03 11:05:44-07:00 Modify Date : 2009:03:12 18:17:10-07:00 Metadata Date : 2009:03:12 18:17:10-07:00 Creator Tool : Adobe Illustrator CS3 Thumbnail Width : 200 Thumbnail Height : 256 Thumbnail Format : JPEG Thumbnail Image : (Binary data 13641 bytes, use -b option to extract) Format : application/pdf Producer : Adobe PDF Library 8.0 Trapped : False N Pages : 1 Has Visible Transparency : False Has Visible Overprint : False Max Page Size W : 612.000000 Max Page Size H : 792.000000 Max Page Size Unit : Points Font Name : Verdana, Verdana-Bold Font Family : Verdana, Verdana Font Face : Regular, Bold Font Type : Open Type, Open Type Font Version : Version 2.45, Version 2.45 Font Composite : False, False Font File Name : Verdana, Verdana Plate Names : PANTONE Cool Gray 9 U Swatch Group Name : Default Swatch Group Swatch Group Type : 0 Swatch Colorant Swatch Name : PANTONE Cool Gray 9 U Swatch Colorant Type : SPOT Swatch Colorant Tint : 100.000000 Swatch Colorant Mode : CMYK Swatch Colorant Cyan : 0.000000 Swatch Colorant Magenta : 0.999451 Swatch Colorant Yellow : 0.000000 Swatch Colorant Black : 50.999496 Has XFA : No Page Count : 4 Creator : Adobe Illustrator(R) 13.0 For : John Tso, Title : meraki_MR58_reg.pdf Bounding Box : 0 0 612 792 Container Version : 11 Creator Version : 13 Image Height : 792 Image Width : 612 Image Size : 612x792 Megapixels : 0.485EXIF Metadata provided by EXIF.tools