Cisco Systems BSTBT 562 Wireless Dual Headset, Multi Base Station US, CA User Manual

Cisco Systems Inc 562 Wireless Dual Headset, Multi Base Station US, CA

UserManual.wiki >

Cisco Systems >

BSTBT User Manual HTML Version

User Manual

Printed in PRC

Printed in Israel Imprimé en Israël Напечатано в Израиле

Printed in Singapore Imprimé à Singapour Напечатано в Сингапуре

Printed in Hungary Imprimé en Hungary Напечатано в Венгрии

English and French

Printed in the USA on recycled paper containing 10% post consumer waste. Imprimé aux États-Unis

sur du papier recyclé à 10 %.

Printed in the USA Imprimé aux Etats-Unis

Printed in Czech Republic Imprimé en République tchèque

Printed in China PRC Imprimé en République populaire de Chine

Printed in Malaysia Imprimé en Malaisie

Printed in Mexico Imprimé au Mexique

Printed in Taiwan Imprimé à Taïwan

78-101053-0 1

FPO — updated bar

code required

https://cisco.com/go/headsets

Cisco Headset

500 Series

Model 561

Model 562

with Multi-base

00:04

https://cisco.com/go/headset_support

Cisco Headset 561 and Cisco Headset 562 with Multi-Base

For Cisco IP Phone 8800 Series on Cisco Unied Communications Manager

Quick Reference Guide

Headset LED status indication

Incoming Call Blinking red

Active Call Steady red

Headset paired with dock White LED blinking every 4 seconds

Headset and dock not paired White LED blinking rapidly

High Sound Pressure—Avoid listening to high volume levels for long periods to prevent

possible hearing damage.

When you plug in your headset, lower the volume of the headset speaker before you put

the headset on. If you remember to lower the volume before you take the headset o, the

volume will start lower when you plug in your headset again.

Be aware of your surroundings. When you use your headset, it may block out important

external sounds, particularly in emergencies or in noisy environments. Don’t use the

headset while driving. Don’t leave your headset or headset cables in an area where

people or pets can trip over them. Always supervise children who are near your headset

or headset cables.

Power/Call

Mute

Volume +/-

Base LED status indication

Battery strength LEDs show solid as battery charges

System update LEDs blink in squence left to right.

Headset and dock not paired All LEDs blinking

Sources

Mobile

Computer

Deskphone

Source Call Status

Incomming Call Blinking Green

Active Call Steady Green

Muted Call Steady Red

Cisco Headset 561 and Cisco Headset 562 with Multi-Base

For Cisco IP Phone 8800 Series on Cisco Unied Communications Manager

Quick Reference Guide

Cisco and the Cisco logo are trademarks or registered trademarks of

Cisco and/or its affiliates in the U.S. and other countries. To view a list

of Cisco trademarks, go to this URL: www.cisco.com/go/trademarks.

Third-party trademarks mentioned are the property of their respective

owners. The use of the word partner does not imply a partnership

relationship between Cisco and any other company. (1110R)

Turn on/o your headset

Hold for 4 seconds.

You will hear a tone indicating headset status.

Make a call

Press .

Put a call on hold

Press .

End a call

Hold for 2 seconds.

Reject a call

Press twice.

Adjust your volume

Press .

Mute yourself on a call

Press .

Unmute yourself on a call

Press again.

End a call and answer an incoming call

1. Hold for 2 seconds.

2. Press .

End a call and resume a held call

1. Hold for 2 secods.

2. Select the call you would like to resume.

3. Press .

For more information, visit:

http://www.cisco.com/go/ipphones/7800

http://www.cisco.com/go/ipphones/8800

http://www.cisco.com/go/headsets

October 2018

Put a call on hold and resume a call

1. Press .

2. Optional: Select the call you would like to

resume.

3. Press again.

Put a call on hold and answer an

incoming call

Press .

End a call and answer a call from a

dierent source.

1. Press for 2 seconds.

2. Select the call source on the dock.

3. Press again.

Adjust your bass and treble (USB only)

1. Press Applications .

2. Select Accessories > Cisco Headset.

3. Press Setup and select Speaker > Tuning.

4. Press the Navigation cluster, left or right, to

adjust the tuning.

Adjust your speaker feedback (USB only)

1. Press Applications .

2. Select Accessories > Cisco Headset.

3. Press Setup and select Speaker > Sidetone.

4. Press the Navigation cluster, up or down, to

adjust the sidetone.

The sidetone is low by default.

5. Select Set to apply your settings.

Adjust your microphone volume (USB

only)

1. Press Applications .

2. Select Accessories > Cisco Headset.

3. Press Setup and select Microphone > Gain.

4. Press the Navigation cluster, left or right, to

adjust the gain.

Test your microphone (USB only)

1. Press Applications .

2. Select Accessories > Cisco Headset.

3. Press Setup and select Microphone > Test.

4. Press Record and speak into the microphone.

5. Press Stop rec when you nish speaking.

6. Press Play to review your test recording.

FCC Warning：

Thisdevicecomplieswithpart15oftheFCCRules.Operationissubjecttothefollowingtwoconditions:



(1)Thisdevicemaynotcauseharmfulinterference,and(2)thisdevicemustacceptanyinterference

received,includinginterferencethatmaycauseundesiredoperation.AnyChangesormodificationsnotexpresslyapprovedbythepartyresponsibleforcompliancecouldvoidtheuser's

authoritytooperatetheequipment.



Note:ThisequipmenthasbeentestedandfoundtocomplywiththelimitsforaClassBdigitaldevice,

pursuanttopart15oftheFCCRules.Theselimitsaredesignedtoprovidereasonableprotectionagainstharmfulinterferenceinaresidentialinstallation.Thisequipmentgenerates,usesand

canradiateradiofrequencyenergyand,ifnotinstalledandusedinaccordancewiththeinstructions,maycauseharmfulinterferencetoradiocommunications.However,thereisno

guaranteethatinterferencewillnotoccurinaparticularinstallation.Ifthisequipmentdoescauseharmfulinterferencetoradioortelevisionreception,whichcanbedeterminedbyturning

theequipmentoffandon,theuserisencouragedtotrytocorrecttheinterferencebyoneormoreofthefollowingmeasures:



—Reorientorrelocatethereceivingantenna.



—Increasetheseparationbetweentheequipmentandreceiver.



—Connecttheequipmentintoanoutletonacircuitdifferentfromthattowhichthereceiverisconnected.



—Consultthedealeroranexperiencedradio/TVtechnicianforhelp.



FCC Exposure to Radio Frequency (RF) Signals

For Handset

Thisisaradiotransmitterandreceiver.Itisdesignedandmanufacturednottoexceedtheemissionlimitsforexposuretoradiofrequency(RF)energysetbytheFederalCommunications

Commission(FCC)oftheU.S.Government.TheselimitsarepartofcomprehensiveguidelinesandestablishpermittedlevelsofRFenergyforthegeneralpopulation.Theguidelinesarebased

onthesafetystandardspreviouslysetbybothU.S.andinternationalstandardsbodies.Thesestandardsincludeasubstantialsafetymargindesignedtoassurethesafetyofallpersons,

regardlessofageandhealth.Thisdeviceanditsantennamustnotbecollocatedoroperatinginconjunctionwithanyotherantennaortransmitter.Thisproducthasbeenshowntobe

capableofcomplianceforlocalizedspecificabsorptionrate(SAR)foruncontrolledenvironment/generalpopulationexposurelimitsspecifiedinANSI/IEEEStd.C95.1‐1992andhadbeen

testedinaccordancewiththemeasurementproceduresspecifiedinFCC/OETBulletin65SupplementC(2001)andIEEE1528.



For Base

ThisequipmentcomplieswithFCCradiationexposurelimitssetforthforanuncontrolledenvironment.Thisequipmentshouldbeinstalledandoperatedwithminimumdistance20cm

betweentheradiator&yourbody.

Thistransmittermustnotbeco‐locatedoroperatinginconjunctionwithanyotherantennaortransmitter.

Cisco Headset 561 and Cisco Headset 562 with Multi-Base

For Cisco IP Phone 8800 Series on Cisco Unied Communications Manager

Quick Reference Guide

October 2018

ISEDC Warning:

ThisdevicecomplieswithISEDClicence‐exemptRSSstandard(s).Operationissubjecttothefollowingtwoconditions:



(1)thisdevicemaynotcauseinterference,and

(2)thisdevicemustacceptanyinterference,includinginterferencethatmaycauseundesiredoperationofthedevice.



LeprésentappareilestconformeauxCNRd'ISEDCapplicablesauxappareilsradioexemptsdelicence.L'exploitationestautoriséeauxdeuxconditionssuivantes:



(1)l'appareilnedoitpasproduiredebrouillage,et

(2)l'utilisateurdel'appareildoitacceptertoutbrouillageradioélectriquesubi,mêmesilebrouillageestsusceptibled'encompromettrelefonctionnement.



ThedevicehasbeentestedandcompliancewithSARlimits,userscanobtainCanadianinformationonRFexposureandcompliance



LeprésentappareilestconformeAprèsexamendecematérielauxconformitéauxlimitesDASet/ouauxlimitesd’intensitédechampRF,lesutilisateurspeuventsurl’expositionaux

radiofréquencesetlaconformitéandcomplianced’acquérir



ISEDC Specific Absorption Rate (SAR) information

For Handset

SARtestsareconductedusingstandardoperatingpositionsacceptedbytheISEDCwithdevicetransmittingatitshighestcertifiedpowerlevelinalltestedfrequencybands,althoughtheSAR

isdeterminedatthehighestcertifiedpowerlevel,theactualSARlevelofthedevicewhileoperatingcanbewellbelowthemaximumvalue.Beforeanewmodeldeviceisaavailableforsale

tothepublic,itmustbetestedandcertifiedtotheISEDCthatitdoesnotexceedtheexposurelimitestablishedbytheISEDC,testsforeachdeviceareperformedinpositionsandlocationsas

requiredbytheISEDC.Forbodywornoperation,thismodeldevicehasbeentestedandmeetstheISEDCRFexposureguidelineswhenusedwithanaccessory

designatedforthisproductorwhenusedwithanaccessorythatcontainsnometal.



For Base

ThisequipmentcomplieswithISEDCradiationexposurelimitssetforthforanuncontrolledenvironment.Thisequipmentshouldbeinstalledandoperatedwithminimumdistance20cm

betweentheradiator&yourbody.



Thistransmittermustnotbeco‐locatedoroperatinginconjunctionwithanyotherantennaortransmitter.



ISEDC Radiation Exposure Statement:

For Handset

SARl’utilisationdesrèglessmal’emplacementLematérieldetransmissionetfonctionnantdanstouslesessaisàlacertification,mêmesilapuissancesuprêmeadécidéleniveau,utilisation

spécifiquepeutêtretrèsendeçàdelavaleurderéférencemaximale.Typesdematérielsontvendusaupublicunancien,d’essaietdecertificationdel’exposition,limitemaximumsma,

Cisco Headset 561 and Cisco Headset 562 with Multi-Base

For Cisco IP Phone 8800 Series on Cisco Unied Communications Manager

Quick Reference Guide

October 2018

chaquedocumentetl’emplacementdumaterield’essaietconformémentaudocument.Lemodèleenphysique,matérield’essaietconformeauxdirectives

d’expositiondesradiofréquencessmaquanduneannexedésignépourceproduitlorsdeleurutilisationoudespiècesderechangenecontiennentpasdemétal.



For Base

Cetéquipementestconformeauxlimitesd'expositionauxradiationsISEDCdéfiniespourunenvironnementnoncontrôlé.Cetéquipementdoitêtreinstalléetutiliséavecunedistance

minimalede20cmentreleradiateuretvotrecorps.

Cetémetteurnedoitpasêtresituéoufonctionnerconjointementavecuneautreantenneouunautreémetteur.



Cisco Headset 561 and Cisco Headset 562 with Multi-Base

For Cisco IP Phone 8800 Series on Cisco Unied Communications Manager

Quick Reference Guide

October 2018

Cisco Systems BSTBT 562 Wireless Dual Headset, Multi Base Station US, CA User Manual

Cisco Systems Inc 562 Wireless Dual Headset, Multi Base Station US, CA

User Manual

Navigation menu

Namespaces

Views

Navigation