Cisco Systems 12816 Installation And Configuration Guide
2015-01-05
: Cisco-Systems Cisco-Systems-12816-Installation-And-Configuration-Guide-202617 cisco-systems-12816-installation-and-configuration-guide-202617 cisco-systems pdf
Open the PDF directly: View PDF
Page Count: 416 [warning: Documents this large are best viewed by clicking the View PDF Link!]
- Cisco 12016, Cisco 12416, and Cisco 12816 Router Installation and Configuration Guide
- Contents
- Product Overview
- Introduction
- Physical and Functional Description of Router
- Chassis Card Cages
- Switch Fabric Overview
- Alarm Card, Line Card, and Rout Processor Overview
- Blower Module
- Preparing for Installation
- Installing the Router
- Pre-Installation Considerations and Requirements
- Rack-Mounting the Router Chassis
- Supplemental Bonding and Grounding Connections
- Attaching the Vertical Cable-Management Trough
- Connecting Line Card Network Interface Cables
- Connecting GRP Route Processor Cables
- Connecting PRP Route Processor Cables
- Connecting an Alarm Card Cable
- Connecting Power to the Power Shelf
- Installing the Front Covers of Cisco 12016 Original Series Routers
- Installing the Front Cover of Cisco 12010 Enhanced Series Routers
- System Startup and Basic Configuration
- Sources of Cisco IOS Software
- Preconfiguration Requirements
- Boot Process Overview
- Powering On the Router and Observing the Boot Process
- Manually Booting the System
- Configuring the Router
- Cisco IOS User Interface
- Configuring the Software Configuration Register
- Recovering a Lost Password
- Using RP Flash Memory Cards
- Installing and Removing a Flash Memory Card
- Formatting a New Flash Memory Card
- Specifying a Cisco IOS Software Image to Boot the System
- Flash Memory Commands
- Booting from Flash Memory
- Copying Image Files to or From Flash Memory
- Copying a Cisco IOS Software Image into a Flash Memory Card
- Copying Cisco IOS Software Images Between Flash Memory Cards
- Copying System Configuration Files Between RP Memory and a Flash Memory Card
- Booting a New Cisco IOS Software Image from a Flash Memory Card
- Recovering from Locked Blocks in Flash Memory Cards
- Post-Installation Procedures
- Troubleshooting the Installation
- Router Field Diagnostics
- Maintaining the Router
- Prerequisites and Preparation
- Powering Off the Router
- Removing and Installing the Front Covers and Bezel Extenders on Original Cisco 12000 Series Routers
- Removing and Installing Front Doors on Cisco 12016 Enhanced Series Routers
- Cleaning or Replacing the Chassis Air Filter
- Removing and Replacing Blower Modules
- Removing and Replacing AC and DC Power Subsystem Components
- Removing and Replacing an AC Power Supply
- Removing and Replacing the Standard AC-Input Power Shelf
- Removing and Replacing the Optional 2-Level AC-Input Power Shelf
- Upgrading the AC-Input Power Shelf
- Removing and Replacing a DC PEM
- Removing and Replacing the DC-Input Power Shelf
- Removing and Replacing Cards from the Chassis
- Upgrading the Switch Fabric
- Removing and Installing a Chassis
- Removing and Replacing a Power Bus Board Fuse
- Technical Specifications
- Site Log
- Index