Cisco Systems 2800 Users Manual

2015-01-05

• Objectives
• Audience
• Topics Covered by Hardware Documents
• Conventions
• Safety Warnings
  • Warning Definition
• Related Documentation
• Cisco 90-Day Limited Hardware Warranty Terms
• Obtaining Documentation
  • Cisco.com
  • Ordering Documentation
• Documentation Feedback
• Obtaining Technical Assistance
  • Cisco Technical Support Website
  • Submitting a Service Request
  • Definitions of Service Request Severity
• Obtaining Additional Publications and Information
  • Installing and Upgrading Fans in Cisco 2811 Series Routers
• Safety Warnings
• Removing the Chassis Cover
  • Removing the Cover from Cisco 2811 Routers
• Locating the Fan
• Installing and Removing the Fans
  • Removing the System Fans
  • Removing the Power Supply Fan
  • Installing the Fans
• Installing the Chassis Cover
  • Overview of Cisco 2800 Series Routers
• Hardware Features
  • Product Serial Number Location
    • Cisco Product Identification Tool
  • Built-in Interfaces
  • Removable and Interchangeable Modules
  • Memory
  • Power
  • LED Indicators
  • Chassis Ventilation
    • Cisco 2800 Series Router Installation and Preventive Maintenance
  • Real-Time Clock
• Chassis Views
  • Cisco 2801 Chassis
  • Cisco 2811 Chassis
  • Cisco 2821 and Cisco 2851 Chassis
• Interface Numbering
• Specifications
• Regulatory Compliance
  • Preinstallation Requirements and Planning for Cisco 2800 Series Routers
• Safety Recommendations
  • Safety with Electricity
  • Preventing Electrostatic Discharge Damage
• General Site Requirements
  • Power Supply Considerations
  • Site Environment
  • Site Configuration
  • Equipment Racks
• Installation Checklist
• Creating a Site Log
• Inspecting the Router
• Required Tools and Equipment for Installation and Maintenance
  • Port and Cable Information for Cisco 2800 Series Routers
• Console and Auxiliary Port Considerations
  • Console Port Connections
  • Auxiliary Port Connections
• Preparing to Connect to a Network
  • Ethernet Connections
  • Serial Connections
    • Configuring Serial Connections
    • Serial DTE or DCE Devices
    • Signaling Standards Supported
    • Distance Limitations
    • Asynchronous/Synchronous Serial Module Baud Rates
  • ISDN BRI Connections
  • CSU/DSU Connections
    • Chassis Installation Procedures for Cisco 2800 Series Routers
• Installing Modules and Interface Cards
• Installing Internal Field-Replaceable Units (FRUs)
• Setting Up the Chassis
  • Rack-Mounting the Chassis
    • Attaching Rack-Mount Brackets to Cisco 2801 Routers
    • Attaching Rack-Mount Brackets to Cisco 2811, Cisco 2821, and Cisco 2851 Routers
    • Installing the Router in a Rack
    • Attaching Optional Cable Management Bracket
    • Chassis Grounding
  • Setting the Chassis on a Desktop
  • Mounting a Cisco 2811 Router on a Wall
    • Attaching Brackets to the Router for Wall Mounting
    • Attaching the Router to a Wall
• Installing the Chassis Ground Connection
  • Cable Connection Procedures for Cisco 2800 Series Routers
• Power Connections
  • Connecting Routers to AC Power
  • Connecting Routers to DC Power
    • DC Wiring Requirements
    • Wiring Procedure for DC Input
    • Approved Scenarios and Scenarios Not Approved for Dual DC Power Supply Configuration in Cisco 2800 Routers
  • Connecting Routers to Backup Power
• Connecting WAN, LAN, and Voice Cables
  • Ports and Cabling
  • Connection Procedures and Precautions
• Connecting to a Console Terminal or Modem
  • Connecting to the Console Port
  • Connecting to the Auxiliary Port
    • Power Up and Initial Configuration Procedures for Cisco 2800 Series Routers
• Powering Up Cisco 2800 Series Routers
  • Checklist for Power Up
  • Power Up Procedure
  • Verifying the Front Panel LED Indications
  • Verifying the Hardware Configuration
• Configuring the Router
  • Initial Configuration Using Cisco Router and Security Device Manager
  • Initial Configuration Using the Setup Command Facility
  • Initial Configuration Using the Cisco CLI-Manual Configuration
  • Verifying the Initial Configuration
  • Completing the Configuration
    • Troubleshooting Cisco 2800 Series Routers
• Solving Problems
  • Troubleshooting the Power and Cooling Systems
  • Environmental Reporting Features
  • Troubleshooting Modules, Cables, and Connections
• Reading System LEDs
• Reading Port and Module LEDs
• System Messages
• Recovering a Lost Password
• More Troubleshooting Help-Cisco Technical Assistance Center
  • Installing Network Modules in Cisco 2800 Series Routers
• Viewing the Cisco Network Module Installation Guide
• Installing Slot Dividers in Network Module Slots
  • Removing Slot Dividers from Network Module Slots
• Installing and Removing Filler Panels in Network Module Slots
  • Installing Filler Panels in Network Module Slots
  • Removing Filler Panels from Network Module Slots
• Installing Blank Panels over Empty Chassis Slots
  • Blank Panels for Network Module Slots
• Related Product Documentation
  • Installing Interface Cards in Cisco 2800 Series Routers
• Viewing the Cisco Interface Card Installation Guide
• Installing and Removing Slot Dividers
  • Installing Slot Dividers in HWIC Slots on Cisco 2801 Routers
  • Installing Slot Dividers in HWIC Slots on Cisco 2811, Cisco 2821, and Cisco 2851 Routers
  • Removing Slot Dividers from HWIC Slots on Cisco 2801 Routers
  • Removing Slot Dividers from HWIC Slots on Cisco 2811, Cisco 2821, and Cisco 2851 Routers
• Installing Blank Panels over Empty Chassis Slots
  • Blank Panels for HWIC Slots
• Related Product Documentation
  • Installing and Upgrading Internal Modules in Cisco 2800 Series Routers
• Safety Warnings
• Removing the Chassis Cover
  • Removing the Cover from Cisco 2801 Routers
  • Removing the Cover from Cisco 2811 Routers
  • Removing the Cover from Cisco 2821 and Cisco 2851 Routers
• Locating Modules
• Installing and Removing DRAM DIMMs
  • DRAM DIMM Location and Orientation
  • Removing a DRAM DIMM
  • Installing a DRAM DIMM in a Cisco 2801 Router
  • Installing a DRAM DIMM in a Cisco 2811, Cisco 2821, or Cisco 2851 Router
• Installing and Removing AIMs
  • Software Requirement for AIMs
  • AIM Restrictions
  • AIM Location
  • Removing an AIM
  • Installing an AIM
    • Installing an AIM in a Cisco 2801 Router
    • Installing Most AIMs in a Cisco 2811, Cisco 2821, or Cisco 2851 Router
    • Installing AIM2-CUE-K9 or AIM2-APPRE-104-K9 in a Cisco 2811, Cisco 2821, or Cisco 2851 Router
  • Installing a CompactFlash Memory Card on the AIM
  • Applying the AIM Label
  • Verifying AIM Installation
• Installing and Removing PVDMs
  • PVDM Location and Orientation
  • Removing a PVDM
  • Installing a PVDM
• Replacing the Power Supply
  • Installing an Inline Power Supply in a Cisco 2801 Router
  • Installing a Power Supply in a Cisco 2811 Router
    • Removing the Existing Power Supply
    • Installing an AC-Input Power Supply
    • Installing a DC-Input Power Supply
    • Installing an ILP Supply
  • Installing a Power Supply in a Cisco 2821 or Cisco 2851 Router
    • Removing the Existing Power Supply
    • Installing an AC-Input Power Supply
    • Installing a DC-Input Power Supply
    • Installing an ILP Supply
• Installing the Chassis Cover
  • Installing the Cover on Cisco 2801 Routers
  • Installing the Cover on Cisco 2811 Routers
  • Installing the Cover on Cisco 2821 and Cisco 2851 Routers
    • Removing and Installing CompactFlash Memory Cards in Cisco 2800 Series Routers
• Preventing Electrostatic Discharge Damage
• Removing a CompactFlash Memory Card
• Installing a CompactFlash Memory Card