Cisco Systems 2960 Users Manual Catalyst Series Switches Hardware Installation Guide (full Book In PDF Format)

2015-01-05

• Catalyst 2960 Switch Hardware Installation Guide
• Contents
  • Preface
  • Product Overview
    • Features
    • Front Panel Description
      • Catalyst 2960 Switch 24- and 48-Port Switches
        • Catalyst 2960-24-S, 2960-24TC-S, and 2960-48TC-S Switches
        • Catalyst 2960-24PC-L 2960-24TC-L, 2960-48TC-L, 2960 -24LT-L, 2960-24TT-L, and 2960-48TT-L Switches
        • Catalyst 2960G-24TC-L and Catalyst 2960G-48TC-L Switches
      • Catalyst 2960 Switch 8-Port Switches
        • Catalyst 2960PD-8TT-L Switch
        • Catalyst 2960-8TC-L Catalyst 2960G-8TC -L Switches
      • 10/100 Ports
      • 10/100/1000 Ports
      • PoE Ports
      • SFP Module Slots
      • Dual-Purpose Port
      • Power Input Port (Catalyst 2960PD-8TT-L Switch)
      • LEDs
        • System LED
        • RPS LED
        • Port LEDs and Modes
        • Dual-Purpose Port LEDs
      • Cable Guard for the Catalyst 2960-8TC-L, 2960G-8TC-L, and 2960PD-8TT-L Switches
    • Rear Panel Description
      • Power Supplies
        • Internal Power Supply Connector
        • Cisco RPS Connectors
        • Cisco RPS 2300 Connector
      • Console Port
      • Security Slots
    • Management Options
      • Network Configurations
  • Switch Installation (24- and 48-Port Switches)
    • Preparing for Installation
      • Warnings
        • Statement 371-Power Cable and AC Adapter
      • Guidelines for Particulate Matter
      • Installation Guidelines
      • Verifying Package Contents
      • Verifying Switch Operation
    • Installing the Switch
      • Rack-Mounting
        • Removing Screws from the Switch
        • Attaching Brackets to the Catalyst 2960 Switch
        • Mounting the Switch in a Rack
        • Attaching the Cable Guide
      • Wall-Mounting
        • Attaching the Brackets to the Switch for Wall-Mounting
        • Attaching the RPS Connector Cover
        • Mounting the Switch on a Wall
      • Table- or Shelf-Mounting
    • Installing and Removing SFP Modules
      • Installing SFP Modules into SFP Module Slots
      • Removing SFP Modules from SFP Module Slots
    • Connecting to the 10/100 and 10/100/1000 Ports
    • Connecting to SFP Modules
      • Connecting to Fiber-Optic SFP Modules
      • Connecting to 1000BASE-T SFP Modules
    • Connecting to a Dual-Purpose Port
    • Where to Go Next
  • Switch Installation (8-Port Switches)
    • Preparing for Installation
      • Warnings
        • Statement 371-Power Cable and AC Adapter
      • Installation Guidelines
      • Equipment That You Supply
      • Verifying Package Contents
    • Verifying Switch Operation
    • Installing the Switch
      • Desk- or Shelf-Mounting (without Mounting Screws)
      • Desk- or Shelf-Mounting (with Mounting Screws)
      • Under the Desk- or Shelf-Mounting (with Mounting Screws)
      • Wall-Mounting (with Mounting Screws)
      • Magnet Mounting
      • Rack-Mounting
        • Attaching Brackets to the Switch
        • Mounting the Switch in a 19-Inch Rack
      • Wall-Mounting (with Rack-Mount Brackets)
    • Where to Go Next
  • Troubleshooting
    • Diagnosing Problems
      • Verify Switch POST Results
      • Monitor Switch LEDs
      • Verify Switch Connections
        • Bad or Damaged Cable
        • Ethernet and Fiber Cables
        • Link Status
        • Transceiver Module Port Issues
        • Port and Interface Settings
        • Ping the End Device
        • Spanning Tree Loops
      • Monitor Switch Performance
        • Speed, Duplex, and Autonegotiation
        • Autonegotiation and NIC Cards
        • Cabling Distance
    • Clearing the Switch IP Address and Configuration
    • Locating the Switch Serial Number
  • Connector and Cable Specifications
    • Connector Specifications
      • 10/100/1000 Ports
        • Connecting to 10BASE-T- and 100BASE-TX-Compatible Devices
        • Connecting to 1000BASE-T Devices
      • SFP Module Ports
      • Dual-Purpose Ports
      • Console Port
    • Cable and Adapter Specifications
      • SFP Module Cable Specifications
      • Two Twisted-Pair Cable Pinouts
      • Four Twisted-Pair Cable Pinouts for 1000BASE-T Ports
      • Crossover Cable and Adapter Pinouts
        • Identifying a Crossover Cable
        • Adapter Pinouts
  • Technical Specifications
  • Configuring the Switch with the CLI-Based Setup Program
    • Accessing the CLI
      • Accessing the CLI Through Express Setup
      • Accessing the CLI Through the Console Port
    • Connecting to the Console Port
    • Starting the Terminal Emulation Software
    • Connecting to a Power Source
    • Entering the Initial Configuration Information
      • IP Settings
      • Completing the Setup Program
  • Index