Cisco Systems 3120 Users Manual Higbkb

2015-01-05

• Cisco Catalyst Blade Switch 3120 for HP Hardware Installation Guide
• Contents
  • Preface
    • Audience
    • Purpose
    • Organization
    • Conventions
    • Related Publications
    • Obtaining Documentation, Obtaining Support, and Security Guidelines
  • Product Overview
    • Switch Module Features Overview
    • Other Features
      • Switch Module Console Port
      • 10/100/1000 Ports
      • 10-Gigabit Ethernet Module Slots
      • Cisco TwinGig Converter Module
      • LEDs
        • System LED
        • Stack LED
        • Stack Master LED
        • Stack Member LED
        • UID and Health LEDs
        • RJ-45 Uplink Port LEDs
        • 10-Gigabit Ethernet Module Slot Port LEDs
      • StackWise Plus Ports
      • Power Connectors
    • Management Options
      • Using the Device Manager
      • Using the Command-Line Interface
      • Using the Onboard Administrator CLI and GUI
      • Other Management Options
      • Network Configurations
  • Switch Installation
    • Preparing for Installation
      • Safety Warnings
      • Installation Guidelines
      • Verifying Package Contents
    • HP c-Class BladeSystem Enclosure Architecture
    • Installing the Switch Module in the Blade Enclosure
      • Switch Module IP Addresses
    • Using the Onboard Administrator to Assign an IP Address to the Switch Module and Running Express Setup
      • Using Express Setup
      • Setting the Installed Switch Module As the Stack Master
      • Refreshing the PC IP Address
    • Planning and Creating a Switch Stack
      • Stack Cabling Configurations
      • Connecting to the StackWise Plus Ports
    • Installing Devices in the 10-Gigabit Ethernet Slots
      • Installing X2 Transceiver Modules and Cisco Converter Modules
        • Installing a Transceiver or Converter Module
        • Removing a Module
      • Installing SFP Modules
        • Installing an SFP Module
        • Removing an SFP Module
    • Connecting to the 10/100/1000 Ports
    • Planning 10/100/1000 Ethernet Port Connections
    • Where to Go Next
  • Troubleshooting
    • Diagnosing Problems
      • Verify the Switch Module POST Results
      • Look at the Switch Module LEDs
      • Confirm the Switch Module Connections
        • Bad or Damaged Cable
        • Ethernet and Fiber Cables
        • Link Status
        • SFP Module Port Issues
        • Port and Interface Settings
        • Ping the End Device
        • Spanning Tree Loops
      • Verify the Switch Module Performance
        • Speed, Duplex, and Autonegotiation
        • Autonegotiation and Network-Interface Cards
        • Cabling Distance
    • Clearing the Switch Module IP Address and Configuration
    • Replacing a Failed Stack Member
    • Locating the Switch Module Serial Number
  • Technical Specifications
  • Connector and Cable Specifications
    • Connector Specifications
      • 10/100/1000 Ports
        • Connecting to 10BASE-T- and 100BASE-TX-Compatible Devices
        • Connecting to 1000BASE-T Devices
      • 10-Gigabit Ethernet Module Interfaces
      • Cisco TwinGig Converter Module Ports
      • Console Port
    • Cable and Adapter Specifications
      • 10-Gigabit Ethernet X2 Transceiver Module Cable Specifications
      • SFP Module Cable Specifications
      • Two Twisted-Pair Cable Pinouts
      • Four Twisted-Pair Cable Pinouts for 1000BASE-T Ports
      • Identifying a Crossover Cable
      • Console Port Adapter Pinouts
  • Configuring the Switch with the CLI-Based Setup Program
    • Accessing the CLI Through the Console Port
      • Connecting to the Console Port
      • Completing the Initial Configuration
  • Index