Cisco Systems 7500 Series Installation And Configuration Guide 5008.bk
7500 series to the manual 4ac445bd-c809-402b-85c9-c856343a7d0b
2015-01-05
: Cisco-Systems Cisco-Systems-7500-Series-Installation-And-Configuration-Guide-202676 cisco-systems-7500-series-installation-and-configuration-guide-202676 cisco-systems pdf
Open the PDF directly: View PDF
Page Count: 303 [warning: Documents this large are best viewed by clicking the View PDF Link!]
- Cisco 7500 Series Installation and Configuration Guide
- Contents
- Preface
- Audience
- Organization
- Related Documentation
- Conventions
- Safety Warnings
- Warning Definition
- Restricted Area Warning
- Obtaining Documentation
- Cisco.com
- Ordering Documentation
- Documentation Feedback
- Obtaining Technical Assistance
- Cisco Technical Support Website
- Submitting a Service Request
- Definitions of Service Request Severity
- Obtaining Additional Publications and Information
- 1
- Cisco 7500 Series Product Overview
- Terms and Acronyms
- Cisco 7505 Overview
- Cisco 7505 CyBus Backplane
- Cisco 7505 System Specifications
- Cisco 7507 Overview
- Cisco 7507 Dual CyBus Backplane
- Cisco 7507 System Specifications
- Cisco 7507-MX Overview
- Cisco 7507-MX Dual CyBus Backplane
- Cisco 7507-MX System Specifications
- Cisco 7513 Overview
- Cisco 7513 Dual CyBus Backplane
- Cisco 7513 System Specifications
- Cisco 7513-MX Overview
- Cisco 7513-MX Dual CyBus Backplane
- Cisco 7513-MX System Specifications
- Cisco 7576 Overview
- Cisco 7576 Dual CyBus Backplane
- Identifying Cisco 7576 Independent Routers and CyBuses
- CyBus Slot Number Assignments
- Cisco 7576 System Specifications
- Route Switch Processor Overview
- RSP-Specific Hardware Features
- RSP2—Cisco 7505
- RSP4/4+—Cisco7507, Cisco7513, and Cisco7576
- RSP8—Cisco7507-MX and Cisco7513-MX
- RSP16—Cisco 7507, Cisco7507-MX, Cisco 7513, and Cisco7513-MX
- Common RSP Hardware Features
- RSP LEDs
- RSP DRAM
- RSP SRAM
- RSP NVRAM
- RSP Flash Memory
- RSP EEPROM
- RSP Asynchronous Serial Ports—Console and Auxiliary
- AC-Input and DC-Input Power Supply Overview
- Arbiter Overview
- Chassis Interface Overview
- Fan Tray and Blower Assembly Overview
- Cisco 7505 Fan Tray Assembly
- Cisco 7507 and Cisco 7507-MX Blower Assembly
- Cisco7513, Cisco 7513-MX, and Cisco7576 Blower Module Assembly
- Interface Processor Overview
- System Software Overview
- 2
- Preparing for Installation
- Tools and Parts You Need
- Safety Recommendations
- Safety with Electricity
- Chassis Lifting Guidelines
- Preventing Electrostatic Discharge Damage
- AC-Input and DC-Input Power Guidelines
- Cisco 7505 Power Considerations
- Cisco 7507 and Cisco 7507-MX Power Considerations
- Cisco 7513, Cisco 7513-MX, and Cisco 7576 Power Considerations
- Plant Wiring Guidelines
- Interference Considerations with Cabling
- Distance Limitations of Interface Cabling
- Site Environment, Chassis Temperature, and Airflow Guidelines
- Cisco 7505 Airflow Considerations
- Cisco7507 and Cisco 7507-MX Airflow Considerations
- Cisco 7513, Cisco 7513-MX, and Cisco 7576 Airflow Considerations
- Equipment Rack-Mounting Guidelines
- General Equipment Rack Ventilation Considerations
- Cisco 7505 Rack-Mount Considerations
- Cisco 7507 and Cisco 7507-MX Rack-Mount Considerations
- Cisco 7513, Cisco 7513-MX, and Cisco 7576 Rack-Mount Considerations
- Environmental Monitoring and Reporting Overview for the Cisco7500 Series
- Cisco 7500 Series Environmental Monitoring
- Cisco 7500 Series Temperature and Voltage Thresholds
- Cisco 7505 Temperature and Voltage Thresholds
- Cisco 7507 and Cisco 7507-MX Temperature and Voltage Thresholds
- Cisco 7513, Cisco 7513-MX, and Cisco 7576 Temperature and Voltage Thresholds
- Cisco 7500 Series Environmental Reports
- Cisco 7505 Environmental show Command Examples
- Cisco 7507 and Cisco 7507-MX Environmental show Command Examples
- Cisco7513 and Cisco 7513-MX Environmental show Command Examples
- Cisco7576 Environmental show Command Examples
- 3
- Installing a Cisco 7500 Series Router
- Cisco 7500 Series General Installation Considerations
- Providing a Ground Connection for the Chassis
- Installing the Cisco 7505
- Cisco 7505 Installation Considerations
- Rack-Mounting the Cisco7505
- Attaching the Cisco7505 Cable-Management Brackets
- Connecting Power to the Cisco 7505 DC-Input Power Supply
- Installing the Cisco 7507 and Cisco 7507-MX
- Cisco 7507 and Cisco 7507-MX Installation Considerations
- Installing Cisco 7507 and Cisco 7507-MX Power Supplies
- Connecting Power to Cisco7507 or Cisco 7507-MX DC-Input Power Supplies
- Installing the Cisco 7513, Cisco 7513-MX, and Cisco 7576
- Cisco 7513, Cisco 7513-MX, and Cisco 7576 Installation Considerations
- Attaching the Cisco 7513, Cisco 7513-MX, and Cisco 7576 Cable-Management Bracket
- Installing Cisco7513, Cisco 7513-MX, and Cisco 7576 Power Supplies
- Connecting Power to Cisco 7513, Cisco 7513-MX, and Cisco 7576 DC-Input Power Supplies
- Making Cable Connections to the RSP
- Connecting a Console Terminal to the RSP
- Connecting to the Auxiliary Port
- Using the Y-Cables for Console and Auxiliary Connections
- What Do I Do Now?
- 4
- Performing a Basic Configuration of the System
- Starting the System and Observing Initial Conditions
- Overview of Software Configuration Register Settings at Startup
- Configuring the Software Configuration Register
- Configuration Register Bit Meanings
- Changing Configuration Register Settings
- Booting the Cisco 7500 Series Router for the First Time
- Using the Enable Secret and the Enable Password
- Recovering a Lost Password
- Configuring the Cisco 7500 Series System
- Performing a Basic Configuration Using AutoInstall
- Performing a Basic Manual Configuration Using the Setup Facility
- Configuring the Global Parameters
- Configuring Interfaces
- Performing a Basic Configuration Using Configuration Mode
- Checking the Settings
- Saving the Settings to NVRAM and Reviewing Your Configuration
- Implementing Other Configuration Tasks
- What Do I Do Now?
- Using the Flash Memory Cards in the RSPs
- Installing and Removing a Flash Memory Card in an RSP
- Formatting a Flash Memory Card
- Copying Files to Flash Memory
- Making a Flash Memory Card Image Bootable
- Enabling Booting from Flash Memory
- Additional Commands Associated with Flash Memory
- Additional Procedures Associated with Flash Memory Cards
- Copying a Bootable Image into a Flash Memory Card
- Copying Bootable Images Between Flash Memory Cards
- Copying Files Between RSP Memory and a Flash Memory Card
- Copying a Configuration File from RSP NVRAM to a Flash Memory Card on the RSP
- Copying a Configuration from RSP DRAM to a Flash Memory Card on the RSP
- Copying a Configuration File from a Flash Memory Card to RSP NVRAM
- Recovering from Locked Blocks in Flash Memory Cards
- If You Need More Configuration Information
- 5
- Maintaining Your Cisco 7505 Router
- Tools Required for Maintenance Procedures
- Overview of Maintenance Procedures for the Cisco7505
- Maintenance Procedures for the Cisco 7505
- Removing and Replacing the Cisco7505 Cover Panel
- Removing and Replacing the Cisco 7505 Fan Tray
- Removing and Replacing the Cisco 7505 Power Harness Cover
- Removing and Replacing the Cisco 7505 Backplane Cover
- Removing and Replacing the Chassis Interface in the Cisco 7505
- Removing and Replacing the Cisco 7505 Power Supply
- 6
- Maintaining Your Cisco 7507 and Cisco 7507-MX Router
- Tools Required for Maintenance Procedures
- Overview of Maintenance Procedures for theCisco7507 andCisco 7507-MX
- Maintenance Procedures for the Cisco 7507 and Cisco 7507-MX
- Removing Cisco7507 and Cisco 7507-MX Power Supplies
- Removing and Replacing the Cisco 7507 and Cisco 7507-MX Front Chassis Panels
- Cleaning and Replacing the Cisco 7507 and Cisco 7507-MX Air Filter
- Replacing Cisco 7507 and Cisco 7507-MX Internal Components
- Removing and Replacing the Chassis Interface in the Cisco 7507 and Cisco 7507-MX
- Removing and Replacing the Cisco 7507 and Cisco 7507-MX LED Board
- Removing and Replacing the Cisco 7507 and Cisco 7507-MX Blower Assembly
- 7
- Maintaining Your Cisco 7513, Cisco 7513-MX, and Cisco 7576 Router
- Tools Required for Maintenance Procedures
- Maintenance Procedures for the Cisco7513, Cisco 7513-MX, and Cisco7576
- Removing Cisco7513, Cisco 7513-MX, and Cisco 7576 Power Supplies
- Removing and Replacing the Cisco 7513, Cisco 7513-MX, and Cisco 7576 Card Cage Assembly
- Removing the Card Cage Assembly
- Exchanging the EEPROM Devices
- Installing the Card Cage Assembly
- Removing and Replacing the Cisco 7513, Cisco 7513-MX,and Cisco 7576 Blower Module
- Removing and Replacing the Cisco 7513, Cisco 7513-MX, and Cisco 7576 Chassis Cover Panels
- Removing and Replacing the Cisco7513, Cisco 7513-MX, and Cisco7576 Backplane Maintenance Cover
- Removing and Replacing the Chassis Interface in the Cisco7513, Cisco 7513-MX, and Cisco7576
- 8
- Troubleshooting a Cisco 7500 Series Router
- Troubleshooting Overview
- Problem Solving with Cisco 7500 Series Subsystems
- Troubleshooting Guidelines for the Cisco 7505
- Identifying Cisco 7505 Startup Problems
- Troubleshooting the Cisco 7505 Power Subsystem
- Troubleshooting the Cisco 7505 Cooling Subsystem
- Troubleshooting Guidelines for the Cisco 7507 and Cisco 7507-MX
- Identifying Cisco 7507 and Cisco 7507-MX Startup Problems
- Troubleshooting the Cisco 7507 and Cisco 7507-MX Power Subsystem
- Troubleshooting the Cisco 7507 and Cisco 7507-MX Cooling Subsystem
- Troubleshooting Guidelines for the Cisco7513, Cisco 7513-MX, and Cisco7576
- Identifying Cisco 7513, Cisco 7513-MX, and Cisco 7576 Startup Problems
- Troubleshooting the Cisco 7513, Cisco 7513-MX, and Cisco 7576 Power Subsystem
- Troubleshooting the Cisco7513, Cisco 7513-MX, and Cisco7576 Cooling Subsystem
- Troubleshooting Blower Operation
- Troubleshooting the Cisco7500 Series Processor Subsystem
- Troubleshooting the RSP
- Troubleshooting the Interface Processors
- Using Cisco 7500 Series System LEDs
- Using the Front-Panel System LEDs
- Cisco 7507 and Cisco 7507-MX LEDs
- Cisco 7513, Cisco 7513-MX, and Cisco 7576 LEDs
- Using the RSP LEDs
- RSP2 LEDs—Cisco 7500 Series
- RSP4 and RSP8 LEDs—Cisco 7500 Series
- Using the Power Supply LEDs
- Cisco 7505 Power Supply LED
- Cisco 7507 and Cisco 7507-MX Power Supply LEDs
- Cisco 7513, Cisco 7513-MX, and Cisco 7576 Power Supply LEDs
- Additional Reference Information for Troubleshooting
- 9
- Replacing DRAM on the Route Switch Processor
- Upgrading or Replacing DRAM SIMMs on the RSP2
- Removing RSP2 SIMMs
- Installing New RSP2 SIMMs
- Upgrading or Replacing DRAM DIMMs on the RSP4 and RSP8
- Removing RSP4 and RSP8 DIMMs
- Installing New RSP4 or RSP8 DIMMs
- A
- Configuration Register Information
- Configuration Bit Meanings
- Bits 0–3
- Bit 6
- Bit 7
- Bit 8
- Bit 10 and Bit 14
- Bit 11 and Bit 12
- Bit 13
- Bit 15
- Displaying the Configuration Register While Running Cisco IOS
- Displaying the Configuration Register While Running ROM Monitor
- Setting the Configuration Register While Running Cisco IOS
- Setting the Configuration Register While Running ROM Monitor
- Index