Cisco Systems Accessories 186 Users Manual SIP88AGb
188 to the manual 51c5fdd9-14b9-4f0f-b089-1e4be6ac92ce
2015-01-05
: Cisco-Systems Cisco-Systems-Accessories-186-Users-Manual-203605 cisco-systems-accessories-186-users-manual-203605 cisco-systems pdf
Open the PDF directly: View PDF
Page Count: 218 [warning: Documents this large are best viewed by clicking the View PDF Link!]
- CiscoATA186 and CiscoATA188 Analog Telephone Adaptor Administrator’s Guide (SIP)
- Contents
- Preface
- Cisco Analog Telephone Adaptor Overview
- Installing the CiscoATA
- Configuring the CiscoATA for SIP
- Default Boot Load Behavior
- Specifying a Preconfigured VLAN ID or Disabling VLAN IP Encapsulation
- Steps Needed to Configure the Cisco ATA
- Configuring the Cisco ATA Using a TFTP Server
- Voice Configuration Menu
- CiscoATA Web Configuration Page
- Refreshing or Resetting the CiscoATA
- Upgrading the SIP Signaling Image
- Basic and Additional SIP Services
- Important Basic SIP Services
- Additional SIP Services
- Advanced Audio Configuration
- Billable Features
- Comfort Noise During Silence Period When Using G.711
- Configurable Hook Flash Timing
- Configurable Mixing of Call Waiting Tone and Audio
- Configurable On-hook delay
- Debugging Diagnostics
- Dial Plan
- Disabling Access To The Web Interface
- Distinctive Ringing
- DNS SRV Support
- Hardware Information Display
- NAT Gateway
- NAT/PAT Translation
- Network Timing
- OutBoundProxy Support
- Progress Tones
- Receiver-tagged VIA header
- Repeat Dialing on Busy Signal
- SIP Proxy Server Redundancy
- Stuttering Dial Tone on Unconditional Call Forward
- User Configurable Call Waiting Permanent Default Setting
- User Configurable Timeout On No Answer for Call Forwarding
- Setting Up and Placing a Call Without Using a SIP Proxy
- Complete Reference Table of all CiscoATA SIP Services
- Parameters and Defaults
- Configuration Text File Template
- User Interface (UI) Parameter
- Configuration Parameter
- Parameters for Configuration Method
- Network Parameters
- Account Information Parameters
- Backup Server Parameters
- SIP Parameters
- Operating Parameters
- Optional Feature Parameters
- Call Commands
- Configuring and Debugging Fax Services
- Upgrading the CiscoATA Signaling Image
- Troubleshooting
- Using SIP Supplementary Services
- Changing Call Commands
- Cancelling a Supplementary Service
- Common Supplementary Services
- Caller ID
- Call-Waiting Caller ID
- Voice Mail Indication
- Unattended Transfer
- Attended Transfer
- Making a Conference Call in the United States
- Making a Conference Call in Sweden
- Call Waiting in the United States
- Call Waiting in Sweden
- About Call Forwarding
- Call Forwarding in the United States
- Call Forwarding in Sweden
- Call Return in the United States
- Call Return in Sweden
- Calling Line Identification Presentation
- About Calling Line Identification Restriction
- Calling Line Identification Restriction in the United States
- Calling Line Identification Restriction in Sweden
- Voice Menu Codes
- CiscoATASpecifications
- SIP Call Flows
- Glossary
- Index