Cisco Systems Atm Switch Router Users Manual Sw_cnfigb

2015-01-05

• Contents
• Preface
  • Audience
  • New and Changed Information
  • Organization
  • Related Documentation
  • Document Conventions
  • Obtaining Documentation
    • Cisco.com
    • Ordering Documentation
  • Documentation Feedback
  • Obtaining Technical Assistance
    • Cisco Technical Support Website
    • Submitting a Service Request
    • Definitions of Service Request Severity
  • Obtaining Additional Publications and Information
• Product Overview
  • Layer 3 Enabled ATM Switch Router Hardware Overview
    • Layer 3 Enabled ATM Switch Router Hardware (Catalyst8540MSR)
      • Available Hardware Components (Catalyst8540MSR)
    • Layer 3 Enabled ATM Switch Router Hardware (Catalyst8510MSR and LightStream1010)
      • Processor and Feature Card Models (Catalyst8510MSR and LightStream1010)
      • Available Physical Interfaces (Catalyst8510MSR and LightStream1010)
  • Summary of Software Features
    • System Availability (Catalyst8540MSR)
    • ATM Addressing and Plug-and-Play Operation
    • Connections
    • Resource Management
    • Signalling and Routing
    • ATM Internetworking Services (Catalyst8540MSR)
    • ATM Internetworking Services (Catalyst8510MSR and LightStream1010)
    • Network Clocking
    • Management and Monitoring
    • Available Network Management Applications
    • Layer 3 Features
• Understanding the User Interface
  • User Interface Overview
  • Accessing Each Command Mode
    • EXEC Mode
    • Privileged EXEC Mode
    • ROM Monitor Mode
    • Global Configuration Mode
      • Interface Configuration Mode
      • Interface Range Configuration Mode
      • Subinterface Configuration Mode
      • Line Configuration Mode (Catalyst8540MSR)
      • Line Configuration Mode (Catalyst8510MSR and LightStream1010)
      • Map-List Configuration Mode
      • Map-Class Configuration Mode
      • ATM Router Configuration Mode
      • PNNI Node Configuration Mode
      • PNNI Explicit Path Configuration Mode
      • ATM Accounting File Configuration Mode
      • ATM Accounting Selection Configuration Mode
      • LANE Configuration Server Database Configuration Mode
      • ATM E.164 Translation Table Configuration Mode
      • ATM Signalling Diagnostics Configuration Mode
      • Controller Configuration Mode
      • Redundancy Configuration Mode (Catalyst8540MSR)
      • Main CPU Configuration Mode (Catalyst8540MSR)
  • Additional Cisco IOS CLI Features
  • About Embedded CiscoView
  • Installing and Configuring Embedded CiscoView
    • Displaying Embedded CiscoView Information
• Initially Configuring the ATMSwitchRouter
  • Methods for Configuring the ATM Switch Router
    • Terminal Line Configuration (Catalyst8540MSR)
    • Terminal Line Configuration (Catalyst8510MSR and LightStream1010)
  • Configuration Prerequisites
    • Verifying Software and Hardware Installed on the ATM Switch Router
  • Configuring the BOOTP Server
  • Configuring the ATM Address
    • Manually Setting the ATM Address
  • Modifying the Physical Layer Configuration of an ATM Interface
  • Configuring the IP Interface
    • Configuring IP Address and Subnet Mask Bits
      • Displaying the IP Address
    • Testing the Ethernet Connection
  • Configuring Network Clocking
    • Network Clocking Features
    • Configuring Network Clock Sources and Priorities (Catalyst8540MSR)
    • Configuring Network Clock Sources and Priorities (Catalyst8510MSR and LightStream1010)
    • Configuring the Transmit Clocking Source
      • Displaying the Network Clocking Configuration
    • Configuring Network Clocking with NCDP
      • NCDP Network Example
      • Enabling NCDP
      • Configuring Network Clock Sources and Priorities
      • Configuring Optional NCDP Global Parameters
      • Configuring Optional NCDP Per-Interface Parameters
      • Displaying the NCDP Configuration
    • Network Clock Services for CES Operations and CBR Traffic
  • Configuring Network Routing
    • Configuring ATM Static Routes for IISP or PNNI
  • Configuring System Information
  • Configuring Online Diagnostics (Catalyst8540MSR)
    • Access Test (Catalyst8540MSR)
    • OIR Test (Catalyst8540MSR)
    • Snake Test (Catalyst8540MSR)
    • Configuring Online Diagnostics (Catalyst8540MSR)
      • Displaying the Online Diagnostics Configuration and Results (Catalyst8540MSR)
  • Configuring SNMP and RMON
  • Testing the Configuration
    • Confirming the Hardware Configuration (Catalyst8540MSR)
    • Confirming the Hardware Configuration (Catalyst8510MSR and LightStream1010)
    • Confirming the Software Version
    • Confirming Power-on Diagnostics
    • Confirming the Ethernet Configuration
    • Confirming the ATM Address
    • Testing the Ethernet Connection
    • Confirming the ATM Connections
    • Confirming the ATM Interface Configuration
    • Confirming the Interface Status
    • Confirming Virtual Channel Connections
    • Confirming the Running Configuration
    • Confirming the Saved Configuration
• Configuring System ManagementFunctions
  • System Management Tasks
    • Configuring Terminal Lines and Modem Support (Catalyst8540MSR)
    • Configuring Terminal Lines and Modem Support (Catalyst8510MSR and LightStream1010)
    • Configuring Alias
    • Configuring Buffers
    • Configuring Cisco Discovery Protocol
    • Configuring Enable Passwords
    • Configuring Load Statistics Interval
    • Configuring Logging
    • Configuring Login Authentication
    • Configuring Scheduler Attributes
    • Configuring Services
    • Configuring SNMP
    • Username Commands
  • Configuring the Privilege Level
    • Configuring Privilege Level (Global)
    • Configuring Privilege Level (Line)
  • Configuring the Network Time Protocol
    • Displaying the NTP Configuration
  • Configuring the Clock and Calendar
    • Configuring the Clock
    • Configuring the Calendar
  • Configuring TACACS
    • Configuring AAA Access Control with TACACS+
    • Configuring AAA Accounting
    • Configuring TACACS Server
    • Configuring PPP Authentication
  • Configuring RADIUS
    • Configuring RADIUS Authentication
    • Configuring RADIUS Authorization
    • Configuring RADIUS Servers
    • Configuring RADIUS Server Communication
  • Configuring Secure Shell
    • Displaying and Disconnecting SSH
  • Testing the System Management Functions
    • Displaying Active Processes
    • Displaying Protocols
    • Displaying Stacks
    • Displaying Routes
    • Displaying Environment
    • Checking Basic Connectivity (Catalyst8540MSR)
    • Checking Basic Connectivity (Catalyst8510MSR and LightStream1010)
• Configuring Redundancy
  • Route Processor Redundant Operation (Catalyst8540MSR)
    • Configuring Route Processor Redundancy (Catalyst8540MSR)
    • Forcing a Route Processor Switchover (Catalyst8540MSR)
      • Displaying the Configuration Register Value
  • Synchronizing the Configurations (Catalyst8540MSR)
    • Immediately Synchronizing Route Processor Configurations (Catalyst8540MSR)
    • Immediately Synchronizing Route Processor Counters (Catalyst8540MSR)
    • Synchronizing the Configurations During Switchover (Catalyst8540MSR)
  • Synchronizing the Dynamic Information (Catalyst8540MSR)
    • Configuring Dynamic Information Synchronization (Catalyst8540MSR)
    • Configuring Counter Synchronization (Catalyst8540MSR)
  • Displaying the Route Processor Redundancy Configuration (Catalyst8540MSR)
  • Preparing a Route Processor for Removal (Catalyst8540MSR)
  • Configuring Switch Fabric Enhanced High System Availability Operation (Catalyst8540MSR)
    • Configuring Preferred Switching Processors (Catalyst8540MSR)
      • Displaying the Preferred Switch Processor Redundancy Configuration (Catalyst8540MSR)
  • Displaying the Switch Processor EHSA Configuration (Catalyst8540MSR)
  • Storing the Configuration
• Configuring ATM Network Interfaces
  • Disabling Autoconfiguration
    • Displaying the Autoconfiguration
  • Configuring UNI Interfaces
    • Displaying the UNI Interface Configuration
  • Configuring NNI Interfaces
    • Displaying the NNI Interface Configuration
    • Configuring a 12-Bit VPI NNI Interface (Catalyst8540MSR)
      • Displaying the 12-Bit VPI NNI Interface Configuration (Catalyst8540MSR)
  • Configuring IISP Interfaces
    • Displaying the IISP Configuration
• Configuring Virtual Connections
  • Characteristics and Types of Virtual Connections
  • Configuring Virtual Channel Connections
    • Displaying VCCs
    • Deleting VCCs from an Interface
  • Configuring Terminating PVC Connections
    • Displaying the Terminating PVC Connections
  • Configuring PVP Connections
    • Displaying PVP Configuration
    • Deleting PVPs from an Interface
    • Confirming PVP Deletion
  • Configuring Point-to-Multipoint PVC Connections
    • Displaying Point-to-Multipoint PVC Configuration
  • Configuring Point-to-Multipoint PVP Connections
    • Displaying Point-to-Multipoint PVP Configuration
  • Configuring SoftPVC Connections
    • Guidelines for Creating Soft PVCs
    • Configuring Soft PVCs
    • Displaying Soft PVC Configuration
    • Modifying CTTR Indexes on an Existing Soft PVC
  • Configuring Soft PVP Connections
    • Displaying Soft PVP Connections
    • Modifying CTTR Indexes on an Existing Soft PVP
  • Configuring the Soft PVP or Soft PVC Route Optimization Feature
    • Enabling Soft PVP or Soft PVC Route Optimization
    • Displaying an Interface Route Optimization Configuration
  • Configuring Soft PVCs with Explicit Paths
    • Changing Explicit Paths for an Existing SoftPVC
    • Displaying Explicit Path for Soft PVC Connections
  • Configuring Soft PVCs and Soft PVPs with Priority
    • Configuring a Soft PVC with priority
    • Configuring a Soft PVP with Priority
    • Configuring a Soft PVC with Priority for a CES Circuit
    • Configuring a Soft PVC with Priority for Frame Relay Connections
  • Configuring Two-Ended Soft PVC and Soft PVP Connections
    • Configuring Two-Ended Soft PVC Connections
    • Configuring Two-Ended Soft PVP Connections
  • Configuring Access Filters on Soft PVC and Soft PVP Passive Connections
    • Configuring Access Filters on Soft PVC Passive Connections
    • Configuring Access Filters on Soft PVP Passive Connections
  • Configuring Timer Rules Based Soft PVC and SoftPVPConnections
    • Configuring Timer Rules Based Soft PVCs
    • Configuring Timer Rules Based Soft PVPs
      • Displaying the Timer Rules Based Soft PVC and Soft PVP Configuration
  • Configuring Backup Addresses for Soft PVC and SoftPVPConnections
    • How Redundant Soft VC Destinations Work
      • Redundant Soft VC Destinations on the Same Switch
      • Redundant Soft VC Destinations on Different Switches
    • Configuring Redundant Soft VC Destinations
      • Displaying the Redundant Soft VC Destination Address Configuration
  • Configuring Point-to-Multipoint SoftPVC Connections
    • Guidelines for Creating Point-to-Multipoint Soft PVCs
    • Configuring Point-to-Multipoint Soft PVCs
    • Displaying Point-to-Multipoint Soft PVC Configuration
    • Configuring Traffic Parameters for Point-to-Multipoint Soft-PVC Connections
    • Enabling and Disabling the Root of a Point-to-Multipoint Soft-PVC Connections
    • Enabling and Disabling a Leaf of a Point-to-Multipoint Soft PVC
      • Confirming the Party Leaf is Disabled or Enabled
    • Configuring the Retry Interval for Point-to-Multipoint Soft-PVC Parties
    • Deleting a Point-to-Multipoint Soft PVC
      • Confirming VCC Deletion
  • Configuring Nondefault Well-Known PVCs
    • Overview of Nondefault PVC Configuration
    • Configuring Nondefault PVCs
  • Configuring a VPI/VCI Range for SVPs and SVCs
  • Configuring VP Tunnels
    • Configuring a VP Tunnel for a Single Service Category
      • Displaying the VP Tunnel Configuration
    • Configuring a Shaped VP Tunnel
      • Configuring a Shaped VPTunnel on an Interface
      • Displaying the Shaped VPTunnel Configuration
    • Configuring a Hierarchical VPTunnel for Multiple Service Categories
      • Enabling Hierarchical Mode
      • Displaying the Hierarchical VPTunnel Configuration
    • Configuring an End-Point PVC to a PVPTunnel
      • Displaying PVCs
    • Configuring Signalling VPCI for VPTunnels
      • Displaying the VPTunnel VPCI Configuration
    • Deleting VPTunnels
      • Confirming VP Tunnel Deletion
  • Configuring Interface and Connection Snooping
    • Snooping Test Ports (Catalyst8510MSR and LightStream1010)
    • Effect of Snooping on Monitored Port
    • Shutting Down Test Port for Snoop Mode Configuration
    • Other Configuration Options for Snoop Test Port
    • Configuring Interface Snooping
    • Displaying Interface Snooping
    • Configuring Per-Connection Snooping
    • Displaying Per-Connection Snooping
  • Input Translation Table Management
    • Feature Overview
    • VC Block Allocation
    • Freeing an ITT Block
    • Growing an ITT Block
    • ITT Fragmentation
    • Benefits
    • Reducing ITT Fragmentation
    • System and Startup ITT Fragmentation
    • Solution: Minimum block-size per-VPI
    • Using the minblock Command to Specify a Minimum Block Size
    • Using the Autominblock Command to Enable the Minimum Mode
    • Shrinking ITT Block Size
    • Displaying ITT resources
    • Configuration Examples
• Configuring Operation, Administration, and Maintenance
  • OAM Overview
  • Configuring OAM Functions
    • Configuring OAM for the Entire Switch (Catalyst8540MSR)
    • Configuring OAM for the Entire Switch (Catalyst8510MSR and LightStream1010)
    • Configuring the Interface-Level OAM
  • Checking the ATM Connection (Catalyst8540MSR)
  • Checking the ATM Connection (Catalyst8510MSR and LightStream1010)
  • Displaying the OAM Configuration
• Configuring Resource Management
  • Resource Management Functions
  • Switch Fabric Functionality (Catalyst8540MSR)
  • Processor Feature Card Functionality (Catalyst8510MSR and LightStream1010)
  • Configuring Global Resource Management
    • Configuring the Default QoS Objective Table
      • Displaying the ATM QoS Objective Table
    • Configuring the Switch Oversubscription Factor (Catalyst8510MSR and LightStream1010)
      • Displaying the OSF Configuration (Catalyst8510MSR and LightStream1010)
    • Configuring the Service Category Limit (Catalyst8510MSR and LightStream1010)
      • Displaying the Service Category Limit Configuration (Catalyst8510MSR and LightStream1010)
    • Configuring the ABR Congestion Notification Mode (Catalyst8510MSR and LightStream1010)
      • Displaying the ABR Congestion Notification Mode Configuration (Catalyst8510MSR and LightStream...
    • Configuring the Connection Traffic Table
      • CTT Supported Features (Catalyst8540MSR)
      • CTT Supported Features (Catalyst8510MSR and LightStream1010)
      • PVC Connection Traffic Rows
      • SVC Connection Traffic Rows
    • CTT Row Allocations and Defaults
      • Displaying the ATM Connection Traffic Table
    • Configuring the Sustainable Cell Rate Margin Factor
      • Displaying the SCR Margin Configuration
    • Overview of Threshold Groups
      • Configuring the Threshold Group
      • Displaying the Threshold Group Configuration
  • Configuring Physical Interfaces
    • Configuring the Interface Maximum Queue Size (Catalyst8510MSR and LightStream1010)
      • Displaying the Output Queue Maximum Configuration (Catalyst8510MSR and LightStream1010)
    • Configuring the Interface Queue Thresholds per Service Category (Catalyst8510MSR and LightStrea...
      • Displaying the Output Threshold Maximum Configuration (Catalyst8510MSR and LightStream1010)
    • Configuring Interface Output Pacing
      • Displaying the Output Pacing Configuration
    • Configuring Controlled Link Sharing
      • Displaying the Controlled Link Sharing Configuration
    • Configuring the Scheduler and Service Class
      • Displaying the Interface Service Class Information
  • Configuring Physical and Logical Interface Parameters
    • Configuring the Interface Link Distance
      • Displaying the Interface Link Distance Configuration
    • Configuring the Limits of Best-Effort Connections
      • Displaying the Interface Best-Effort Limit Configuration
    • Configuring the Interface Maximum of Individual Traffic Parameters
      • Displaying the Interface Maximum Individual Traffic Parameter Configuration
    • Configuring the ATM Default CDVT and MBS
      • Displaying the ATM CDVT and MBS Configuration
    • Configuring Interface Service Category Support
      • Displaying the Service Category on an Interface
    • Configuring SVC Policing by Service Category
      • Displaying the Service Category Policing on an Interface
  • Configuring Interface Overbooking
    • Displaying the Interface Overbooking Configuration
  • Configuring Service Class Overbooking
    • Displaying the Interface Overbooking Configuration
  • Configuring Framing Overhead
    • Displaying the Framing Overhead Configuration
• Configuring ILMI
  • Configuring the Global ILMI System
    • Configuring the ATM Address
    • Configuring Global ILMI Access Filters
      • Display the ILMI Access Filter Configuration
    • Configuring the LANE Configuration Server Address
    • Displaying the ILMI Global Configuration
  • Configuring an ILMI Interface
    • Configuring Per-Interface ILMI Address Prefixes
      • Displaying ILMI Address Prefix
      • Displaying the ILMI Interface Configuration
    • Configuring ATM Address Groups
      • Displaying ATM Address Group Configuration
• Configuring ATM Routing and PNNI
  • Overview
    • ATM Addresses
  • IISP Configuration
    • Configuring the Routing Mode
      • Displaying the ATM Routing Mode Configuration
    • Configuring the ATM Address
      • Displaying the ATM Address Configuration
    • Configuring Static Routes
      • Displaying the Static Route Configuration
    • Configuring ATM Address Groups
      • Displaying ATM Address Group Configuration
  • Basic PNNI Configuration
    • Configuring PNNI without Hierarchy
    • Configuring the Lowest Level of the PNNI Hierarchy
      • Configuring an ATM Address and PNNI Node Level
      • Configuring Static Routes
      • Configuring a Summary Address
      • Configuring Scope Mapping
    • Configuring Higher Levels of the PNNI Hierarchy
      • Configuring a Logical Group Node and Peer Group Identifier
      • Configuring the Node Name
      • Configuring a Parent Node
      • Configuring the Node Election Leadership Priority
      • Configuring a Summary Address
      • PNNI Hierarchy Configuration Example
  • Advanced PNNI Configuration
    • Tuning Route Selection
      • Configuring Background Route Computation
      • Configuring Link Selection
      • Configuring the Maximum Administrative Weight Percentage
      • Configuring the Precedence
      • Configuring Explicit Paths
    • Tuning Topology Attributes
      • Configuring the Global Administrative Weight Mode
      • Configuring Administrative Weight Per Interface
      • Configuring Transit Restriction
      • Configuring Redistribution
      • Configuring Aggregation Token
      • Configuring Aggregation Mode
      • Configuring Significant Change Thresholds
      • Configuring the Complex Node Representation for LGNs
    • Tuning Protocol Parameters
      • Configuring PNNI Hello, Database Synchronization, and Flooding Parameters
      • Configuring the Resource Management Poll Interval
    • Configuring ATM PNNI Statistics Collection
      • Displaying ATM PNNI Statistics
  • Mobile PNNI Configuration
    • Connecting Mobile PNNI Networks to Fixed PNNI Networks
      • Configuring a Mobile PNNI Interface
      • Configuring Mobile PNNI Nodes
      • Displaying Mobile PNNI Operational Details
      • Configuring a Limit for the ONHL
  • PNNI Connection Trace
    • Initiating a Connection Trace
    • Displaying the Connection Trace Output
    • Displaying PNNI Connection Trace Configuration
    • Deleting Connection Trace Requests
    • Designating PNNI Trace Boundaries
• Using Access Control
  • Access Control Overview
  • Configuring a Template Alias
    • Displaying the Template Alias Configuration
  • Configuring ATM Filter Sets
    • Deleting Filter Sets
  • Configuring an ATM Filter Expression
  • Configuring ATM Interface Access Control
    • Displaying ATM Filter Configuration
  • ATM Filter Configuration Scenario
  • Filtering IP Packets at the IP Interfaces
    • Creating Standard and Extended IP Access Lists
    • Applying an IP Access List to an Interface or Terminal Line
    • IP Access List Examples
      • Examples of Implicit Masks in IP Access Lists
      • Examples of Configuring Extended IP Access Lists
  • Configuring Per-Interface Address Registration with Optional AccessFilters
    • Displaying the ILMI Access Filter Configuration
• Configuring IP over ATM
  • Configuring Classical IP over ATM
    • Configuring Classical IP over ATM in an SVC Environment
      • Configuring as an ATM ARP Client
      • Configuring as an ATM ARP Server
      • Displaying the IP-over-ATM Interface Configuration
    • Configuring Classical IP over ATM in a PVC Environment
      • Displaying the IP-over-ATM Interface Configuration
  • Mapping a Protocol Address to a PVC Using Static Map Lists
    • Configuring a PVC-Based Map List
      • Displaying the Map-List Interface Configuration
    • Configuring an SVC-Based Map List
      • Displaying the Map-List Interface Configuration
  • Policy-Based Routing
    • Policy-Based Routing Restrictions
  • Configuring IP Load Sharing
    • Configuring TCP Packet Load Sharing
    • Configuring Packet Load Sharing for all IP Traffic
• Configuring LANEmulation
  • LANE Functionality and Requirements
    • LANE Router and Switch Router Requirements
  • LANE Configuration Tasks
    • Creating a LANE Plan and Worksheet
      • Automatic ATM Addressing and Address Templates for LANE Components
      • Rules for Assigning Components to Interfaces and Subinterfaces
      • Example LANE Plan and Worksheet
    • Displaying LANE Default Addresses
    • Entering the ATM Address of the Configuration Server
    • Setting Up the Configuration Server Database
      • Setting Up the Database for the Default Emulated LAN Only
      • Setting Up the Database for Unrestricted-Membership Emulated LANs
      • Setting Up the Database for Restricted-Membership Emulated LANs
    • Enabling the Configuration Server
    • Setting Up LESs and Clients
      • Setting Up the Server, BUS, and a Client on a Subinterface
      • Setting Up a Client on a Subinterface
    • Configuring a LAN Emulation Client on the ATM Switch Router
      • Configuring an Ethernet LANE Client
    • Configuring Fault-Tolerant Operation
      • Enabling Redundant LECSs and LES/BUSs
    • Monitoring and Maintaining the LANE Components
  • LANE Configuration Examples
    • Default Configuration for a Single Emulated LAN
      • Ethernet Example
      • Confirming Connectivity between the ATM Switch and Other LANE Members
      • Token Ring Example (Catalyst8510MSR and LightStream1010)
      • Confirming Connectivity between the ATM switch and the Routers
      • Displaying the LANE Client Configuration on the ATM switch
    • Default Configuration for a Single Emulated LAN with Backup LECS and LES on the ATM Switch Router
      • Ethernet Example
      • Token Ring Example (Catalyst8510MSR and LightStream1010)
      • Displaying the LECS Configuration on the ATM Switch Router
      • Displaying the LES Configuration on the ATM Switch Router
    • Default Configuration for a Token Ring ELAN with IP Source Routing (Catalyst8510MSR and LightSt...
• Configuring ATM Accounting, RMON, and SNMP
  • Configuring ATM Accounting
    • ATM Accounting Overview
    • Configuring Global ATM Accounting
      • Displaying the ATM Accounting Configuration
    • Enabling ATM Accounting on an Interface
      • Displaying the ATM Accounting Interface Configuration
    • Configuring the ATM Accounting Selection Table
      • Displaying ATM Accounting Selection Configuration
    • Configuring ATM Accounting Files
      • Displaying the ATM Accounting File Configuration
    • Controlling ATM Accounting Data Collection
      • Displaying the ATM Accounting Data Collection Configuration and Status
    • Configuring ATM Accounting SNMP Traps
      • Configuring ATM Accounting Trap Generation
      • Displaying ATM Accounting Trap Threshold Configuration
      • Configuring SNMP Server for ATM Accounting
      • Displaying SNMP Server ATM Accounting Configuration
    • Using TFTP to Copy the ATM Accounting File
    • Configuring Remote Logging of ATM Accounting Records
      • Displaying the Remote Logging Configuration
  • Configuring ATM RMON
    • RMON Overview
    • Configuring Port Select Groups
      • Displaying the ATM RMON Port Select Group
    • Configuring Interfaces into a Port Select Group
      • Displaying the Interface Port Selection Group Configuration
    • Enabling ATM RMON Data Collection
      • Displaying the ATM RMON Configuration
    • Configuring an RMON Event
      • Displaying the Generated RMON Events
    • Configuring an RMON Alarm
      • Displaying the Generated RMON Alarms
  • Configuring SNMP
    • SNMP Overview
    • Configuring SNMP-Server Hosts
    • Configuring SNMP Traps
    • Configuring Interface Index Persistence
    • SNMP Examples
      • Displaying the SNMP Configuration
• Configuring Tag Switching and MPLS
  • Tag Switching Overview
  • Hardware and Software Requirements and Restrictions (Catalyst8540MSR)
  • Hardware and Software Requirements and Restrictions (Catalyst8510MSR and LightStream1010)
  • Configuring Tag Switching
    • Configuring a Loopback Interface
      • Displaying Loopback Interface Configuration
    • Enabling Tag Switching on the ATM Interface
      • Displaying the ATM Interface Configuration
    • Configuring OSPF
      • Displaying the OSPF Configuration
    • Configuring a VPI Range (Optional)
      • Displaying the Tag Switching VPI Range
    • Configuring TDP Control Channels (Optional)
      • Displaying the TDP Control Channels
    • Configuring Tag Switching on VP Tunnels
      • Displaying the VP Tunnel Configuration
    • Connecting the VP Tunnels
      • Displaying the VP Tunnel Configuration
    • Configuring VC Merge
      • Displaying the VC Merge Configuration
  • Configuring Tag Switching CoS
    • Configuring the Service Class and Relative Weight
    • Displaying the TVC Configuration
  • Threshold Group for TBR Classes
  • CTT Row
  • RM CAC Support
  • Tag Switching Configuration Example
  • MPLS Overview
    • Obtaining Additional MPLS Documentation
    • Hardware and Software Restrictions
    • MPLS/Tag Switching Terminology
    • How MPLS Works
    • Distribution of Label Bindings
    • Summary Route Propagation
    • LFIB Table Look Up Process
  • MPLS Network Packet Transmission
  • Configuring Label Edge Routing
    • LER Software Limitations
    • MPLS Processing
    • Tag Switching Processing
  • MPLS Over Fast Ethernet Interfaces
    • Configuring MPLS on Fast Ethernet Interfaces
  • MPLS VPNs
    • Configuring VPN on Fast Ethernet Interface
      • Fast Ethernet Interface Example
      • Network Configuration Example
    • Configuring MPLS VPN Using ATM RFC 1483 Interfaces
      • Network Configuration Example
• Configuring Signalling Features
  • Configuring Signalling IE Forwarding
    • Displaying the Interface Signalling IE Forwarding Configuration
  • Configuring ATM SVC Frame Discard
    • Displaying the ATM Frame Discard Configuration
  • Configuring E.164 Addresses
    • E.164 Conversion Methods
    • Configuring E.164 Gateway
      • Configuring an E.164 Address Static Route
      • Displaying the E.164 Static Route Configuration
      • Configuring an ATM E.164 Address on an Interface
      • Displaying the E.164 Address Association to Interface Configuration
    • Configuring E.164 Address Autoconversion
      • Displaying the E.164 Address Autoconversion
    • Configuring E.164 Address One-to-One Translation Table
      • Displaying the ATM E.164 Translation Table Configuration
  • Configuring Signalling Diagnostics Tables
    • Displaying the Signalling Diagnostics Table Configuration
  • Configuring Closed User Group Signalling
    • Configuring Aliases for CUG Interlock Codes
    • Configuring CUG on an Interface
    • Displaying the CUG
      • Displaying the Signalling Statistics
  • Disabling Signalling on an Interface
  • Multipoint-to-Point Funnel Signalling
    • Displaying Multipoint-to-Point Funnel Connections
• Configuring Interfaces
  • Configuring 25-Mbps Interfaces (Catalyst8510MSR and LightStream1010)
    • Default 25-Mbps ATM Interface Configuration without Autoconfiguration (Catalyst8510MSR and Ligh...
    • Manual 25-Mbps Interface Configuration (Catalyst8510MSR and LightStream1010)
  • Configuring 155-Mbps SM, MM, and UTP Interfaces
    • 155-Mbps Interface Configuration
    • Default 155-Mbps ATM Interface Configuration without Autoconfiguration
    • Manual 155-Mbps Interface Configuration
  • Configuring OC-3c MMF Interfaces (Catalyst8540MSR)
    • Default OC-3c MMF Interface Configuration without Autoconfiguration (Catalyst8540MSR)
    • Manual OC-3c MMF Interface Configuration (Catalyst8540MSR)
  • Configuring 622-Mbps SM and MM Interfaces
    • Default 622-Mbps ATM Interface Configuration without Autoconfiguration
    • Manual 622-Mbps Interface Configuration
  • Configuring OC-12c SM and MM Interfaces (Catalyst8540MSR)
    • OC-12c Interface Configuration (Catalyst8540MSR)
    • Default OC-12c ATM Interface Configuration without Autoconfiguration (Catalyst8540MSR)
    • Manual OC-12c Interface Configuration (Catalyst8540MSR)
  • Configuring OC-48c SM and MM Interfaces (Catalyst8540MSR)
    • Default OC-48c ATM Interface Configuration Without Autoconfiguration (Catalyst8540MSR)
    • Manual OC-48c Interface Configuration (Catalyst8540MSR)
  • Configuring DS3 and E3 Interfaces
    • DS3 and E3 Interface Configuration
    • Default DS3 and E3 ATM Interface Configuration without Autoconfiguration
    • Manual DS3 and E3 Interface Configuration
  • Configuring T1/E1 Trunk Interfaces
    • T1/E1 Trunk Interface Configuration
    • Default T1 and E1 ATM Interface Configuration without Autoconfiguration
    • Manual T1 and E1 Interface Configuration
  • Troubleshooting the Interface Configuration
• Configuring Circuit Emulation Services
  • Overview of CES T1/E1 Interfaces
    • Clocking Options
    • Interfaces Supported
    • Connectors Supported
    • Functions Supported by CES Modules
    • Framing Formats and Line Coding Options for CES Modules
    • Default CES T1/E1 Interface Configuration
  • Configuring CES T1/E1 Interfaces
  • General Guidelines for Creating SoftPVCs for Circuit Emulation Services
  • Configuring T1/E1 Unstructured Circuit Emulation Services
    • Overview of Unstructured Circuit Emulation Services
      • Configuring Network Clocking for Unstructured CES
    • Configuring a Hard PVC for Unstructured CES
    • Verifying a Hard PVC for Unstructured CES
    • Configuring a Soft PVC for Unstructured CES
      • Phase 1—Configuring the Destination (Passive) Side of the SoftPVC
      • Phase 2—Configuring the Source (Active) Side of the SoftPVC
    • Verifying a Soft PVC for Unstructured CES
  • Configuring T1/E1 Structured (n x 64) Circuit Emulation Services
    • Overview of Structured Circuit Emulation Services
      • Configuring Network Clocking for Structured CES
    • Configuring a Hard PVC for Structured CES
    • Verifying a Hard PVC for Structured CES
    • Configuring a Hard PVC for Structured CES with a Shaped VP Tunnel
      • Phase 1—Configuring a Shaped VP Tunnel
      • Phase 2—Configuring a Hard PVC
    • Verifying a Hard PVC for Structured CES with a Shaped VP Tunnel
    • Configuring a Soft PVC for Structured CES
      • Phase 1—Configuring the Destination (Passive) Side of a SoftPVC
      • Phase 2—Configuring the Source (Active) Side of a SoftPVC
    • Verifying a Soft PVC for Structured CES
    • Configuring a Soft PVC for Structured CES with CAS Enabled
    • Verifying a Soft PVC for Structured CES with CAS Enabled
    • Configuring a Soft PVC for Structured CES with CAS and On-Hook Detection Enabled
    • Verifying a Soft PVC for Structured CES with CAS and On-Hook Detection Enabled
    • Creating Multiple Structured Soft PVCs on the Same CES Port
      • Phase 1—Configuring the Destination (Passive) Side of Multiple SoftPVCs
      • Phase 2—Configuring the Source (Active) Side of Multiple SoftPVCs
    • Verifying the Creation of Multiple Structured SoftPVCs on the Same CES Port
  • Configuring T1/E1 CES SVCs
    • Configuring T1/E1 Unstructured CES SVCs
      • Phase 1—Configuring the Destination (Passive) Side of the Unstructured SwitchedVC
      • Phase 2—Configuring the Source (Active) Side of the Unstructured SwitchedVC
    • Verifying a Switched VC for Unstructured CES
    • Configuring T1/E1 Structured CES SVCs
      • Phase 1—Configuring the Destination (Passive) Side of the Structured SwitchedVC
      • Phase 2—Configuring the Source (Active) Side of the Structured SwitchedVC
    • Verifying a Switched VC for Structured CES
  • Reconfiguring a Previously Established Circuit
  • Deleting a Previously Established Circuit
    • Verifying Deletion of a Previously Established Circuit
  • Configuring SGCP
    • Operation
    • Configuring SGCP on the Entire Switch
    • Displaying SGCP
    • Configuring CES Circuits for SGCP
    • Displaying SGCP Endpoints
    • Displaying SGCP Connections
    • Configuring SGCP Request Handling
    • Configuring Call-Agent Address
    • Shutting Down SGCP
  • Configuring Explicit Paths on CES VCs
    • Configuring CES VC Explicit Paths
    • Displaying CES VC Explicit Path Configuration
  • Configuring Point-to-Multipoint CES SoftPVC Connections
    • Guidelines for Creating Point-to-Multipoint CES Soft PVCs
    • Configuring Point-to-Multipoint Unstructured CES Soft PVCs
      • Configuring the Destination Side of a Point-to-Multipoint Unstructured CES SoftPVC
      • Configuring the Source Side of a Point-to-Multipoint Unstructured CES SoftPVC
    • Configuring Point-to-Multipoint Structured CES Soft PVCs
      • Configuring the Destination Side of a Point-to-Multipoint Structured CES SoftPVC
      • Configuring the Source Side of a Point-to-Multipoint Structured CES SoftPVC
    • Displaying Point-to-Multipoint CES Soft PVC Configuration
    • Deleting and Disabling Point-to-Multipoint CES Soft PVC Connections
      • Deleting Point-to-Multipoint CES Soft PVC
      • Confirming VCC Deletion
      • Enabling and Disabling the Root of a Point-to-Multipoint CES Soft PVC
      • Enabling and Disabling a Leaf of a Point-to-Multipoint CES Soft PVC
      • Confirming the Party Leaf is Disabled or Enabled
    • Configuring the Retry Interval for Point-to-Multipoint CES Soft-PVC Parties
• Configuring Frame Relay to ATM InterworkingPortAdapter Interfaces
  • Configuring the Channelized DS3 Frame Relay Port Adapter
    • Configuration Guidelines
    • Default CDS3 Frame Relay Port Adapter Interface Configuration
    • Configuring the CDS3 Frame Relay Port Adapter Interface
    • Configuring the T1 Lines on the CDS3 Frame Relay Port Adapter
    • Configuring the Channel Group on the CDS3 Frame Relay Port Adapter
    • Displaying the CDS3 Frame Relay Port Adapter Controller Information
    • Deleting a Channel Group on the CDS3
      • Method One
      • Method Two
  • Configuring the Channelized E1 Frame Relay Port Adapter
    • Default CE1 Frame Relay Port Adapter Interface Configuration
    • Configuring the CE1 Frame Relay Port Adapter Interface
    • Configuring the Channel Group on the CE1 Frame Relay Port Adapter
      • Displaying the CE1 Frame Relay Port Adapter Controller Information
  • Configuring Frame Relay to ATM Interworking Functions
    • Enabling Frame Relay Encapsulation on an Interface
      • Displaying Frame Relay Encapsulation
    • Configuring Frame Relay Serial Interface Type
      • Displaying Frame Relay Interface Configuration
  • Configuring Frame Relay Frame Size for Frame Relay to ATM Interworking
    • Configuring and Using Frame Relay Frame Size
  • Configuring LMI
    • Configuring the LMI Type
      • Displaying LMI Type
    • Configuring the LMI Keepalive Interval
      • Displaying LMI Keepalive Interval
    • Configuring the LMI Polling and Timer Intervals (Optional)
      • Displaying Frame Relay Serial Interface
      • Displaying LMI Statistics
  • Configuring Frame Relay to ATM Resource Management
    • Configuring Frame Relay to ATM Connection Traffic Table Rows
      • PVC Connection Traffic Rows
      • SVC Connection Traffic Rows
      • Predefined Rows
    • Creating a Frame Relay to ATM CTT Row
      • Displaying the Frame Relay to ATM Connection Traffic Table
    • Configuring the Interface Resource Management Tasks
      • Displaying Frame Relay Interface Resources
  • Configuring Frame Relay to ATM Virtual Connections
    • Characteristics and Types of Virtual Connections
    • Configuring Frame Relay PVC Connections
      • Configuration Guidelines
      • Configuring Frame Relay to ATM Network Interworking PVCs
      • Displaying Frame Relay to ATM Network Interworking PVCs
      • Configuring Frame Relay to ATM Service Interworking PVCs
      • Displaying Frame Relay to ATM Service Interworking PVCs
      • Configuring Terminating Frame Relay to ATM Service Interworking PVCs
      • Displaying Terminating Frame Relay to ATM Service Interworking PVCs
      • Configuring Frame Relay Transit PVCs
    • Configuring Frame Relay Soft PVC Connections
      • Configuration Guidelines
      • Configuring Frame Relay to Frame Relay Network Interworking Soft PVCs
      • Configuring Frame Relay to ATM Network Interworking Soft PVCs
      • Configuring Frame Relay to ATM Service Interworking Soft PVCs
      • Display Frame Relay Interworking Soft PVCs
      • Modifying CTTR Indexes on an Existing Frame Relay Soft PVC
      • Standard Signalling for Frame Relay Soft PVCs
      • Configuring the Soft PVC Route Optimization Feature
      • Configuring a Frame Relay Interface with Route Optimization
      • Displaying a Frame Relay Interface Route Optimization Configuration
  • Respecifying Existing Frame Relay to ATM Interworking Soft PVCs
  • Configuring Overflow Queuing
    • Overflow Queuing Functional Image Requirements
    • Configuring Overflow Queuing on Frame Relay to ATM PVCs
      • Network Internetworking PVCs
      • Service Internetworking PVC Connections
    • Configuring Overflow Queuing on Frame Relay to Frame Relay PVCs
    • Configuring Overflow Queuing on Frame Relay to ATM Soft PVCs
    • Configuring Overflow Queuing on Frame Relay to Frame Relay Soft PVCs
    • Displaying Overflow Queuing Configuration at the VC Level
• Configuring IMA Port Adapter Interfaces
  • Overview of IMA
  • Configuring the T1/E1 IMA Port Adapter
    • Default T1/E1 IMA Interface Configuration
    • Configuring the T1/E1 IMA Interface
      • Displaying the T1/E1 IMA Interface Configuration
  • Configuring IMA Group Functions
    • Creating an IMA Group Interface
    • Adding an Interface to an Existing IMA Group
      • Displaying the IMA Group Configuration
    • Deleting an Interface from an IMA Group
      • Confirming the Interface Deletion
    • Deleting an IMA Group
      • Confirming the IMA Group Deletion
  • Configuring IMA Group Parameters
    • Configuring IMA Group Minimum Active Links
      • Displaying the IMA Group Minimum Active Links Configuration
    • Configuring IMA Group Interface Clock Mode
      • Displaying the IMA Group Interface Clock Mode Configuration
    • Configuring IMA Group Link Differential Delay
      • Displaying the IMA Group Link Differential Delay Configuration
    • Configuring IMA Group Frame Length
      • Displaying the IMA Group Frame Length Configuration
    • Configuring IMA Group Test Pattern
      • Displaying the IMA Group Test Pattern Configuration
• Configuring Quality of Service
  • About Quality of Service
    • Best-Effort Service
    • Integrated Service
    • Differentiated Service
  • About Layer 3 Switching Quality of Service
    • About Quality of Service Mechanisms
  • IP Precedence Based Class of Service (CoS)
    • About Scheduling and Weighted Round-Robin
    • Configuring Precedence to WRR Scheduling
      • Mapping QoS Scheduling at the Interface Level
    • Verifying the QoS Configuration
  • About IP QoS on the Enhanced Gigabit Ethernet and Enhanced ATM Router Module Interfaces
    • Packet Classification
    • Traffic Conditioning
    • Marking
    • Metering and Policing
    • Per Hop Behavior Definition
    • Queuing
      • Buffer Management
    • Scheduling
    • Congestion Control
    • Tail Drop
    • xRED
    • Configuring IP QoS Policies Using the Modular CLI
  • IP QoS—Functional Differences Between Modules (Catalyst8540 MSR)
    • Input Policy
    • Output Policy
    • Differentiated Services for ATM Forum VCs
    • Displaying the IP QoS Configuration
    • Supported and Unsupported Features
  • Configuring IP QoS on Enhanced Gigabit Ethernet and Enhanced ATM Router Module Interfaces
    • Defining a traffic class
    • Creating a Service Policy
    • Configuring Buffer-Groups
    • Attaching a Service Policy to an Interface
    • TCAM Region for IP QoS
  • Verifying the IP QoS Configuration
• Configuring the ATM Traffic-Shaping CarrierModule
  • About the ATM Traffic-Shaping Carrier Module
    • ATM TSCAM Features
  • Hardware and Software Restrictions
    • Hardware Restrictions
    • Software Restrictions
    • About Interface Congestion Thresholds
  • Configuring the ATM TSCAM
  • Configuring Maximum Thresholds
    • Configuring Maximum Thresholds for Traffic Classes
    • Configuring Maximum Thresholds for VCs
  • Displaying Traffic-Shaping Configurations
  • Traffic-shaping Granularity Tables
• Configuring Rate Limiting and Traffic Shaping
  • Rate Limiting
    • Features Supported
    • Restrictions
    • Configuring Rate Limiting
  • Traffic Shaping
    • Features
    • Restrictions
    • Configuring Traffic Shaping
  • Displaying the Configurations
• Configuring ATM Router Module Interfaces
  • Overview of the ATM Router Module
    • Catalyst8540MSR Enhanced ATM Router Module Features
    • Catalyst8540MSR ATM Router Module Features
    • Catalyst8510MSR and LightStream1010 ATM Router Module Features
  • Hardware and Software Restrictions of the ATM Router Module
    • Hardware Restrictions
    • Catalyst8540MSR Enhanced ATM Router Module Software Restrictions
    • Catalyst8540MSR ATM Router Module Software Restrictions
    • Catalyst8510MSR ATM Router Module Software Restrictions
  • Configuring ATM Router Module Interfaces
    • Default ATM Router Module Interface Configuration Without Autoconfiguration
  • Configuring LECs on ATM Router Module Interfaces (Catalyst8540MSR)
    • LEC Configuration Examples
      • LANE Routing Over ATM
      • LANE Routing from ATM to Ethernet
      • LANE Bridging Between ATM and Ethernet
      • Configuring LECs and 1483 PVCs on Enhanced ATM Router Module Interfaces
    • Confirming the LEC Configuration
  • Configuring Jumbo Frames
    • Displaying the Interface MTU Configuration
  • Configuring Multiprotocol Encapsulation over ATM
    • Multiprotocol Encapsulation over ATM Configuration Example
  • Configuring Classical IP over ATM in a PVC Environment
  • Configuring Classical IP over ATM in an SVC Environment
    • Configuring as an ATM ARP Client
      • NSAP Address Example
      • ESI Example
    • Configuring as an ATM ARP Server
      • Displaying the IP-over-ATM Interface Configuration
  • Configuring Bridging
    • Configuring Packet Flooding on a PVC
    • Displaying the Bridging Configuration
  • Configuring IP Multicast
  • About Rate Limiting
    • Features Supported
    • Restrictions
    • Configuring Rate Limiting
  • Configuring VC Bundling
    • Overview
    • VC Bundle Examples
    • Displaying the VC Bundle Configuration
  • Configuring VC Bundling with IP and ATM QoS
    • Configure Input IP Processing
      • Configure the BA or MF Classifiers
      • Displaying the BA or MF Classifier Configuration
      • Configure and Apply the Input Policy Map
      • Displaying the Input Map Policy
    • Configure Per-Hop Behavior and Output Processing
      • Configuring Output Queues Based on BA Classifiers
      • Displaying the BA Classifier Configuration
      • Configuring Output Policy Map
      • Displaying the Policy Map Configuration
      • Applying the Output Policy Map on the Enhanced ATM Router Module
      • Displaying the Output Policy Interface Configuration
    • Mapping the IP to ATM Configuration
      • Creating the Traffic Rows for PVCs and VC-bundle Members
      • Creating PVCs and Configuring VC Bundle on Enhanced ATM Router Module
    • Calculating the Scheduler Class Weights
    • Congestion Control
    • Troubleshooting and Verifying the VC Bundling with IP and ATM QoS
• Managing Configuration Files, System Images, and Functional Images
  • Configuring a Static IP Route
  • Understanding the Cisco IOS File System
    • File Systems and Memory Devices
    • File System Tasks
  • Maintaining System Images and Configuration Files
    • Modifying, Downloading, and Maintaining Configuration Files
    • Modifying, Downloading, and Maintaining System Images
    • Rebooting and Specifying Startup Information
    • Additional File Transfer Features
  • Maintaining Functional Images (Catalyst8540MSR)
    • Understanding Functional Images (Catalyst8540MSR)
    • Loading Functional Images (Catalyst8540MSR)
    • Displaying the Functional Image Information (Catalyst8540MSR)
  • Maintaining Functional Images (Catalyst8510MSR and LightStream1010)
    • Understanding Functional Images (Catalyst8510MSR and LightStream1010)
    • Loading Functional Images (Catalyst8510MSR and LightStream1010)
    • Displaying the Functional Image Information (Catalyst8510MSR and LightStream1010)
• PNNI Migration Examples
  • Adding a Higher Level of PNNI Hierarchy
    • Switch T1 Initial Configuration
    • Switch T2 Initial Configuration
    • Switch T3 Initial Configuration
    • Switch T4 Initial Configuration
    • Switch T5 Initial Configuration
    • Configuring Second Level of PNNI Hierarchy on Switches T3 and T4
    • Configuring the Link Between Switch T3 and Switch T4 for PNNI
    • Verifying Connectivity to All ATM Addresses and Deleting an Old Static Route on SwitchesT4andT3
  • Adding a New Lowest Level of PNNI Hierarchy
    • Switch T1 Initial Configuration
    • Switch T2 Initial Configuration
    • Switch T3 Initial Configuration
    • Switch T4 Initial Configuration
    • Switch T5 Initial Configuration
    • Moving Switch T4 Down into a New Peer Group
    • Moving Switch SanFran.BldA.T5 Down into an Existing Peer Group
    • Restoring Auto-Summary on the LGN SanFran
    • Moving Switches T3, T1, and T2 Down into a New Peer Group
    • Restoring Autosummary on the LGN NewYork
• Acronyms
• Index