Cisco Systems Catalyst 2955 Installation Manual Switch Hardware Guide (full Book In PDF Format)

2015-01-05

• Catalyst2955 Hardware Installation Guide
• Contents
  • Cisco Limited 5-Year Hardware and 1Year Software Warranty Terms
  • Preface
    • Audience
    • Purpose
    • Conventions
    • Related Publications
    • Obtaining Documentation
      • Cisco.com
      • Documentation DVD
      • Ordering Documentation
    • Documentation Feedback
    • Cisco Product Security Overview
      • Reporting Security Problems in Cisco Products
    • Obtaining Technical Assistance
      • Cisco Technical Support Website
      • Submitting a Service Request
      • Definitions of Service Request Severity
    • Obtaining Additional Publications and Information
  • Configuring the Switch with the CLI-Based Setup Program
    • Taking Out What You Need
    • Connecting to a Power Source
    • Connecting to the Console Port
    • Starting the Terminal-Emulation Software
    • Entering the Initial Configuration Information
      • IP Settings
      • Completing the Setup Program
  • Overview
    • Features
    • Front-Panel Description
      • Warning Labels
      • 10/100 Ports
      • 10/100/1000 Ports
      • 100BASE-FX Ports
      • 100BASE-LX Ports
      • Power and Relay Connector
      • Console Port
      • LEDs
        • Power Status LEDs
        • 10/100 Port Status LEDs
        • Uplink Port Status LEDs
        • Alarm Relay LEDs
    • Rear-Panel Description
    • Catalyst 2955 Switch Power Converter
    • Management Options
  • Installation
    • Preparing for Installation
      • Warnings
      • EMC Regulatory Statements
        • U.S.A.
        • Class A Notice for Taiwan and Other Traditional Chinese Markets
        • VCCI Class A Notice for Japan
        • Class A Warning for Korea
        • Class A Warning for Hungary
        • Installation Guidelines
      • Verifying Package Contents
    • Applying the Switch Protective Liner
    • Verifying Switch Operation
      • Connecting a PC or a Terminal to the Console Port
      • Powering On the Switch and Running POST
        • Grounding the Switch
        • Wiring the DC Power Source
        • Add the Ferrite to the Power and Relay Connector Wiring
        • Attach the Power and Relay Connector to the Switch
        • Power On the Switch
        • Running POST
    • Connecting the Switch to the Power Converter
      • Installing the Power Converter on a DIN Rail
      • Connecting the Power Converter to the Power and Relay Connector
      • Connecting the Power Converter to an AC Power Source
        • Preparing the AC Power Cord
        • Connecting the AC Power Cord to the Power Converter
      • Connecting the Power Converter to a DC Power Source
      • Applying Power to the Power Converter
      • Removing the Power Converter from a DIN Rail
    • Wiring the External Alarm Device Relays
    • Installing the Switch on a DIN Rail
    • Installing the Switch in a Rack
    • Removing the Switch from a DIN Rail or a Rack
    • Connecting to 10/100 and 10/100/1000 Ports
    • Connecting to 100BASE-FX MM Ports
    • Connecting to 100BASE-LX SM Ports
    • Where to Go Next
  • Installation in a Hazardous Environment
    • Preparing for Installation
      • Warnings
      • EMC Regulatory Statements
        • U.S.A.
        • Class A Notice for Taiwan and Other Traditional Chinese Markets
        • VCCI Class A Notice for Japan
        • Class A Warning for Korea
        • Class A Warning for Hungary
      • European Zone 2 Certification
      • Installation Guidelines
      • Verifying Package Contents
    • Applying the Switch Protective Liner
    • Verifying Switch Operation
      • Connecting a PC or a Terminal to the Console Port
      • Powering On the Switch and Running POST
        • Grounding the Switch
        • Wiring the DC Power Source
        • Add the Ferrite to the Power and Relay Connector Wiring
        • Attach the Power and Relay Connector to the Switch
        • Power On the Switch
        • Running POST
    • Wiring the External Alarm Device Relays
    • Installing the Switch on a DIN Rail
    • Installing the Switch in a Rack
    • Removing the Switch from a DIN Rail or a Rack
    • Connecting to 10/100 and 10/100/1000 Ports
    • Connecting to 100BASE-FX MM Ports
    • Connecting to 100BASE-LX SM Ports
    • Where to Go Next
  • Troubleshooting
    • Understanding POST Results
    • Diagnosing Problems
  • Technical Specifications
  • Connectors and Cables
    • Connector Specifications
      • 10/100 and 10/100 /1000 Ports
      • 100BASE-FX Ports
      • 100BASE-LX Ports
      • Power and Relay Connector
      • Console Port
    • Cable and Adapter Specifications
      • Two Twisted-Pair Cable Pinouts
      • Four Twisted-Pair Cable Pinouts for 10/100 Ports
      • Four Twisted-Pair Cable Pinouts for 1000BASE-T Ports
      • Cable and Adapter Pinouts
        • Connecting to a PC
        • Connecting to a Terminal
        • Identifying a Crossover Cable
  • Translated Safety Warnings
    • Work During Lightning Activity
    • Power and Relay Connector
    • Switch Installation In Hazardous Location
    • Safe Operating Voltage Range Warning
    • Switch Relays Warning
    • Remove Power Before Disconnecting
    • “Open Type” Equipment
    • Grounded Equipment
    • Console Cable Connection
    • Overtemperature Warning
    • Class I, Division 2, Hazardous Location
    • Twisted-pair Supply Wires
    • Pollution Degree 2 Industrial Environment
    • Port Connection
    • Installation Instructions
    • Service Personnel Warning
    • Stacking the Chassis Warning
    • Ground Connection Warning
    • SELV-IEC 60950 DC Power Supply
    • Jewelry Removal Warning
    • Product Disposal Warning
    • Class 1 Laser Product
    • Class 1 LED Product
    • Laser Radiation
    • Laser Viewing Warning
    • Laser Beam Exposure
    • Chassis Warning for Rack-Mounting and Servicing
    • Grounded Equipment Warning
    • Qualified Personnel Warning
    • Restricted Area
    • Chassis Power Connection
    • Exposed DC Power Wire Warning
  • Index