Cisco Systems Mds 9200 Series Installation Manual

2015-01-05

• Cisco MDS 9200 Series Hardware Installation Guide
  • Contents
  • New and Changed Information
  • Preface
    • Audience
    • Organization
    • Conventions
    • Related Documentation
      • Release Notes
      • Compatibility Information
      • Regulatory Compliance and Safety Information
      • Hardware Installation
      • Cisco Fabric Manager
      • Command-Line Interface
      • Intelligent Storage Networking Services Configuration Guides
      • Troubleshooting and Reference
      • Installation and Configuration Note
    • Obtaining Documentation, Obtaining Support, and Security Guidelines
  • Product Overview
    • Chassis
    • Cisco MDS Fibre Channel Bladeswitch for IBM Blade Center
    • Integrated Supervisor Modules
      • Cisco MDS 9222i Integrated Supervisor Module
      • Cisco MDS 9216i Integrated Supervisor Module
      • Cisco MDS 9216A Integrated Supervisor Module
      • LEDs on the Cisco MDS 9200 Series Integrated Supervisor Modules
    • Interface Modules
      • LEDs on the Interface Module
    • Cisco MDS 9000 Family Module Compatibility
    • Switching Modules
      • 4/44-Port 8-Gbps Host-Optimized Fibre Channel Switching Module
      • 48-Port 4-Gbps Fibre Channel Switching Module
      • 24-Port 4-Gbps Fibre Channel Switching Module
      • 12-Port 4-Gbps Fibre Channel Switching Module
      • 4-Port 10-Gbps Fibre Channel Switching Module
      • LEDs on the Generation 2 Switching Modules
      • 32-Port 2-Gbps Fibre Channel Switching Module
      • 16-Port 2-Gbps Fibre Channel Switching Module
      • Switching Module Features
      • LEDs on the Generation 1 Switching Module
    • Services Modules
      • 1 8/4-Port Multiservice Module
      • 18/4-Port Multiservice Federal Information Processing Standards Module
        • LEDs on the 18/4-Port Multiservice Module
      • 14/2-Port Multiprotocol Services Module
        • LEDs on the 14/2-Port Multiprotocol Services Module
      • IP Storage Services Modules
        • LEDs on IP Storage Services Module
      • 32-Port Fibre Channel Storage Services Module
        • LEDs on the Storage Services Module
      • 32-Port Fibre Channel Advanced Services Module
        • LEDs on the Fibre Channel Advanced Services Module
      • Caching Services Module
        • LEDs on the Caching Services Module
    • Power Supplies
    • Fan Module
    • Supported Transceivers
      • X2 Fibre Channel Transceivers
      • Fibre Channel SFP Transceivers
      • Combination Fibre Channel/Gigabit Ethernet SFP Transceivers
      • CWDM Combination Fibre Channel/Gigabit Ethernet SFP Transceivers
      • Gigabit Ethernet SFP Transceivers
      • DWDM Fibre Channel SFP Transceivers
  • Installing the Cisco MDS 9200 Series
    • Preinstallation
      • Installation Options
      • Installation Guidelines
      • Required Equipment
      • Unpacking and Inspecting the Switch
    • Installing the Chassis in a Cabinet or Rack
    • Installing the Switch in a Cabinet with Insufficient Front Clearance
      • Installing Front Rack-Mount Brackets for Cabinets with 26 Inches or Greater of Rail Spacings
      • Installing Front Rack-Mount Brackets for Cabinets with Less Than 26 Inches of Rail Spacings
      • Installing the Cisco MDS 9200 Series Rear-Facing into Cabinet
    • System Grounding
      • Proper Grounding Practices
      • Preventing Electrostatic Discharge Damage
      • Establishing the System Ground
      • Required Tools and Equipment
    • Grounding the Chassis
    • Starting Up the Switch
    • Removing and Installing Components
      • Removing and Installing Switching and Services Modules
        • Removing a Caching Services Module
        • Removing Other Switching or Services Modules
        • Installing a Switching or Services Module, Including Caching Services Modules
        • Verifying Installation of a Switching or Services Module
      • Maintaining a Caching Services Module
        • Maintaining the Batteries on the Caching Services Module
        • Maintaining the Disk Drives on the Caching Services Module
      • Removing and Installing Power Supplies
        • Removing a Power Supply
        • Installing a Power Supply
      • Removing and Installing the Fan Module
        • Removing a Fan Module
        • Installing a Fan Module
      • Removing the Cisco MDS 9200 Series
  • Connecting the Cisco MDS 9200 Series
    • Preparing for Network Connections
    • Connecting to the Console Port
    • Connecting to the COM1 Port
    • Connecting to the MGMT 10/100 Ethernet Port
    • Connecting to a Fibre Channel Port
      • Removing and Installing X2 Transceivers
        • Installing an X2 Transceiver
        • Removing an X2 Transceiver
      • Removing and Installing SFP Transceivers
        • Installing an SFP Transceiver
        • Removing an SFP Transceiver
      • Removing and Installing Cables into SFP Transceivers
        • Installing a Cable into an SFP Transceiver
        • Removing a Cable from an SFP Transceiver
      • Maintaining SFP Transceivers and Fiber-Optic Cables
  • Cabinet and Rack Installation
    • Cabinet and Rack Requirements
      • General Requirements for Cabinets and Racks
      • Requirements Specific to Perforated Cabinets
      • Requirements Specific to Solid-Walled Cabinets
      • Requirements Specific to Standard Open Racks
      • Requirements Specific to telco Racks
    • Cisco MDS 9000 Family telco and EIA Shelf Bracket
      • Rack-Mounting Guidelines
      • Before Installing the Shelf Brackets
        • Required Equipment
      • Installing the Shelf Bracket Kit into a Two-Post telco Rack
      • Installing the Shelf Bracket Kit into a Four-Post EIA Rack
      • Installing the Switch on the Shelf Brackets
      • Removing the Shelf Bracket Kit (Optional)
  • Technical Specifications
    • Switch Specifications
    • Module Specifications
      • Weight of Modules
    • Power Specifications
      • Specifications for the Cisco MDS 9200 Series Power Supplies
      • Component Power Requirements and Heat Dissipation Specifications
    • X2 Transceiver Specifications
      • Cisco 10-Gbps Fibre Channel X2 Transceivers
    • General Specification for Cisco 10-Gbps Fibre Channel X2 Transceivers
      • Environmental Conditions and Power Requirement Specifications for Cisco 10-Gbps Fibre Channel X2 Transceivers
      • Cisco 10-Gbps Ethernet X2 Transceivers
      • General Specification for Cisco 10-Gbps Ethernet X2 Transceivers
      • Environmental and Power Requirements Specifications for Cisco 10-Gbps Ethernet X2 Transceiver
      • Cisco 10-Gbps Ethernet DWDM X2 Transceiver
    • SFP and SFP+ Transceiver Specifications
      • Cisco Fibre Channel SFP and SFP+ Transceivers
        • General Specifications for Cisco 8-Gbps Fibre Channel SFP+ Transceivers
        • Environmental and Power Requirements for Cisco 8-Gbps Fibre Channel SFP+ Transceivers
        • General Specifications for Cisco 4-Gbps Fibre Channel SFP Transceivers
        • Environmental and Power Requirement for Cisco 4-Gbps Fibre Channel SFP Transceivers
        • General Specifications for Cisco 2-Gbps Fibre Channel SFP Transceivers
        • Environmental and Power Requirement for Cisco 2-Gbps Fibre Channel SFP Transceivers
        • Maximum Environmental and Electrical Ratings for Cisco Fibre Channel SFP Transceivers
      • Cisco Fibre Channel/Gigabit Ethernet Transceivers
        • General Specifications for Cisco Fibre Channel/Gigabit Ethernet SFP Transceivers
        • Environmental and Power Requirement Specifications for Cisco Fibre Channel/Gigabit Ethernet SFP Transceivers
      • Cisco CWDM SFP Transceivers
        • Environmental and Optical Specifications for Cisco 2-Gbps CWDM SFP Transceivers
        • Environmental and Optical Specifications for Cisco 4-Gbps CWDM SFP Transceivers
      • Cisco Gigabit Ethernet Transceivers
        • General Specifications for Cisco Gigabit Ethernet Transceivers
        • Environmental and Power Requirement Specifications for Cisco Gigabit Ethernet Transceivers
      • DWDM SFP Transceivers
  • Cable and Port Specifications
    • Cables and Adapters Provided
    • Console Port
      • Console Port Pinouts
      • Connecting the Console Port to a Computer Using the DB-25 Adapter
      • Connecting the Console Port to a Computer Using the DB-9 Adapter
    • COM1 Port
      • COM1 Port Pinouts
      • Connecting the COM1 Port to a Modem
    • MGMT 10/100/1000 Ethernet Port
    • MGMT 10/100 Ethernet Port
      • Supported Power Cords and Plugs
      • Power Cords
        • Supported Plugs for 6000-W AC, 2500-W AC, and 1900-W AC Power Supplies
        • Supported Plugs for the 4000-W AC Power Supply
      • Jumper Power Cord
  • Site Planning and Maintenance Records
    • Site Preparation Checklist
    • Contact and Site Information
    • Chassis and Module Information
  • Index