Cisco Systems Pap2T Users Manual _ATA_Guide

2015-01-05

• Cover
• About This Document
  • Purpose
  • Audience
  • Firmware
  • Document Conventions
  • Organization
  • Finding Information in PDF Files
    • Finding Text in a PDF
    • Finding Text in Multiple PDF Files
• Introducing Cisco Small Business Analog Telephone Adapters
  • Comparison of ATA Devices
  • ATA Connectivity Requirements
    • PAP2T Connectivity
    • SPA2102 Connectivity
    • SPA3102 Connectivity
    • SPA8000 Connectivity
  • ATA Software Features
    • Voice Supported Codecs
    • SIP Proxy Redundancy
    • Other ATA Software Features
• Basic Administration and Configuration
  • Basic Services and Equipment Required
  • Downloading Firmware
  • Basic Installation and Configuration
  • Upgrading the Firmware for the ATA Device
  • Setting up Your ATA Device
  • Using the Administration Web Server
    • Connecting to the Administration Web Server
    • Setting Up the WAN Configuration for Your ATA Device
    • Registering to the Service Provider
    • Advanced Configurations
  • Upgrading, Rebooting, and Resyncing Your ATA Device
    • Upgrade URL
    • Resync URL
    • Reboot URL
  • Provisioning Your ATA Device
    • Provisioning Capabilities
    • Configuration Profile
• Configuring Your System for ITSP Interoperability
  • Network Address Translation (NAT) and Voice over IP (VoIP)
    • NAT Mapping with Session Border Controller
    • NAT Mapping with SIP-ALG Router
    • Configuring NAT Mapping with a Static IP Address
    • Configuring NAT Mapping with STUN
    • Determining Whether the Router Uses Symmetric or Asymmetric NAT
  • Firewalls and SIP
  • Configuring SIP Timer Values
• Configuring Voice Services
  • Supported Codecs
  • Using a FAX Machine (SPA2102, SPA3102 or SPA8000)
    • Fax Troubleshooting
  • Managing Caller ID Service
  • Silence Suppression and Comfort Noise Generation
  • Configuring Dial Plans
    • About Dial Plans
    • Editing Dial Plans
  • Secure Call Implementation
    • Enabling Secure Calls
    • Secure Call Details
    • Using a Mini-Certificate
    • Generating a Mini Certificate
  • SIP Trunking and Hunt Groups on the SPA8000
    • About SIP Trunking
    • Setting the Trunk Group Call Capacity
    • Inbound Call Routing for a Trunk Group
    • Contact List for a Trunk Group
    • Outgoing Call Routing for a Trunk Group
    • Configuring a Trunk Group
    • Trunk Group Management
    • Setting the Hunt Policy
    • Additional Notes About Trunk Groups
• Configuring Music on Hold
  • Using the Internal Music Source for Music On Hold
    • Using the Internal Music Source
    • Changing the Music File for the Internal Music Source
  • Configuring a Streaming Audio Server
    • About the Streaming Audio Server
    • Configuring the Streaming Audio Server
    • Using the IVR with an SAS Line
• Configuring the PSTN (FXO) Gateway on the SPA3102
  • Connecting to PSTN and VoIP Services
  • How VoIP-To-PSTN Calls Work
    • One-Stage Dialing
    • Two-Stage Dialing
  • How PSTN-To-VoIP Calls Work
    • Terminating Gateway Calls
    • VoIP Outbound Call Routing
  • Configuring VoIP Failover to PSTN
  • Sharing One VoIP Account Between the FXS and PSTN Lines
  • Other Options
    • PSTN Call to Ring Line 1
    • Symmetric RTP
    • Call Progress Tones
  • Call Scenarios
    • PSTN to VoIP Call with and Without Ring-Thru
    • VoIP to PSTN Call With and Without Authentication
    • Call Forwarding to PSTN Gateway
• ATA Routing Field Reference
  • Router Status page
    • Product Information section
    • System Status section
  • WAN Setup page
    • Internet Connection Settings section
    • Static IP Settings section
    • PPPoE Settings section
    • Optional Settings section
    • MAC Clone Settings section
    • Remote Management section
    • QOS Settings section
    • VLAN Settings section
  • LAN Setup page
    • Networking Service section
    • LAN Networking Settings section
    • Static DHCP Lease Settings section
  • Application page
    • Port Forwarding Settings section
    • DMZ Settings section
    • Miscellaneous Settings section
    • System Reserved Ports Range section
• ATA Voice Field Reference
  • Info page
    • Product Information section
    • System Status section
    • Line Status section
    • System Information section (PAP2T)
    • PSTN Line Status section (SPA3102)
    • Trunk Status section (SPA8000)
  • System page
    • System Configuration section
    • Internet Connection Type section (PAP2T)
    • Optional Network Configuration section (PAP2T)
    • Miscellaneous Settings section (not used with PAP2T)
  • SIP page
    • SIP Parameters section
    • SIP Timer Values (sec) section
    • Response Status Code Handling section
    • RTP Parameters section
    • SDP Payload Types section
    • NAT Support Parameters section
    • Trunking Parameters section (SPA8000)
  • Regional page
    • Call Progress Tones section
    • Distinctive Ring Patterns section
    • Distinctive Call Waiting Tone Patterns section
    • Distinctive Ring/CWT Pattern Names section
    • Ring and Call Waiting Tone Spec section
    • Control Timer Values (sec) section
    • Vertical Service Activation Codes section
    • Vertical Service Announcement Codes section (SPA2102, SPA8000)
    • Outbound Call Codec Selection Codes section
    • Miscellaneous section
  • Line page
    • Line Enable section
    • Streaming Audio Server (SAS) section
    • NAT Settings section
    • Network Settings section
    • SIP Settings section
    • Call Feature Settings section
    • Proxy and Registration section
    • Subscriber Information section
    • Supplementary Service Subscription section
    • Audio Configuration section
    • Gateway Accounts section (SPA3102)
    • VoIP Fallback to PSTN section (SPA3102)
    • Dial Plan section
    • FXS Port Polarity Configuration section
  • Trunk Group page (SPA8000)
    • Line Enable section
    • Network Settings section
    • SIP Settings section
    • Subscriber Information section
    • Dial Plan section
    • NAT Settings section
    • Proxy and Registration section
  • PSTN Line page (SPA3102)
    • Line Enable section
    • NAT Settings section
    • Network Settings section
    • SIP Settings section
    • Proxy and Registration section
    • Subscriber Information section
    • Audio Configuration section
    • Dial Plans section
    • VoIP-To-PSTN Gateway Setup section
    • VoIP Users and Passwords (HTTP Authentication) section
    • Ring Settings section
    • FXO (PSTN) Timer Values (sec) section
    • PSTN Disconnect Detection section
    • International Control (Settings) section
  • User page
    • Call Forward Settings section
    • Selective Call Forward Settings section
    • Speed Dial Settings section
    • Supplementary Service Settings section
    • Distinctive Ring Settings section
    • Ring Settings section
  • PSTN User page (SPA3102 Only)
    • PSTN-To-VoIP Selective Call Forward Settings section
    • PSTN-To-VoIP Speed Dial Settings section
    • PSTN Ring Thru Line 1 Distinctive Ring Settings section
    • PSTN Ring Thru Line 1 Ring Settings section
• Provisioning Reference (WRP400)
• Troubleshooting
• Environmental Specifications
  • PAP2T
  • SPA2102
  • SPA3102
  • SPA8000
  • WRP400
  • WRTP54G
• Where to Go From Here
  • Product Resources
  • Related Documentation
• Additional Information
• Support Contacts