Cisco Systems Rv215W Users Manual Wireless N VPN Firewall Quick Start Guide (English)
RV215WAK9NA to the manual b228cfdf-5d5b-430c-9ce7-101a42d3102e
2015-01-05
: Cisco-Systems Cisco-Systems-Rv215W-Users-Manual-202937 cisco-systems-rv215w-users-manual-202937 cisco-systems pdf
Open the PDF directly: View PDF 
.
Page Count: 8
| Download | |
| Open PDF In Browser | View PDF |
Quick Start Guide Cisco Small Business RV215W Wireless-N VPN Firewall Package Contents • Wireless-N VPN Firewall • Ethernet Cable • Power Adapter • Quick Start Guide • Documentation and software on CD-ROM Version en français sur CD Welcome Thank you for choosing the Cisco Small Business RV215W Wireless-N VPN Firewall. This guide describes how to physically install your Cisco RV215W and launch the web-based Device Manager. 1 Installing the Cisco RV215W Placement Tips To prevent the firewall from overheating or being damaged: • Ambient Temperature—Do not operate it in an area that exceeds an ambient temperature of 104°F (40°C). • Air Flow—Be sure that there is adequate air flow around the firewall. • Mechanical Loading—Be sure that the firewall is level and stable to avoid any hazardous conditions. Place the device on a flat surface so that it sits on its four rubber feet. 2 Cisco RV215W Features Front Panel 2 Power Solid green to indicate the unit is powered on and booted. Flashes green when the device is booting or loading the firmware. USB Lit green when the corresponding port is connected to a device. Flashes green when the port is sending or receiving data. WAN Solid green when the firewall is connected to the Internet by using a wired connection. The light is off when it is not connected to the Internet or it is connected by using a USB dongle. The light flashes when it is sending or receiving data over the wired connection. Cisco RV215W Wireless-N VPN Firewall Wireless LAN (1-4) The light is off when the wireless radio is disabled (switched off). It flashes green when the wireless radio is transmitting or receiving data. The button, when held for 5 seconds or more, switches the wireless radio on or off. The button and the LED is lit green when the wireless radio is enabled (switched on). The numbered lights correspond to the LAN ports on the back panel. Lit green when the corresponding port is connected to a device. Flashes green when the port is sending or receiving data. Back Panel RESET—The RESET button has two functions: • To reboot the unit and retain the current configuration, press and hold RESET for at least 3, but no more than 10 seconds, by using a paper clip or a pen tip. • To reboot the unit and restore the factory default configuration, press and hold in the RESET button for more than 10 seconds. Changes you have made to the Cisco RV215W configuration are lost. LAN (1-4)—RJ-45 device connections to link local area network devices, such as PCs, print servers, or switches, to the firewall. WAN (Internet)—Internet device connection for connecting the firewall to a wide area network device, such as a cable or DSL modem. POWER—Switch that toggles power to the device on or off. 12VDC—Power port that connects the firewall to the provided 12VDC power adapter. Side Panel USB—Type A USB port on the right side of the housing that supports 3G/4G/LTE USB dongles. Cisco RV215W Wireless-N VPN Firewall 3 Connecting the Equipment 3 You must connect a PC to the firewall by using an Ethernet cable to perform the initial configuration. After the initial configuration, administrative tasks can be performed through the network or by using a wireless connection. To connect a PC to the Cisco RV215W for initial configuration: STEP 1 Power off all equipment, including the cable or DSL modem, the PC, and the Cisco RV215W. STEP 2 Use an Ethernet cable to connect your cable or DSL modem to the WAN port on the firewall. STEP 3 Connect another Ethernet cable from one of the LAN (Ethernet) ports to the Ethernet port on the PC. STEP 4 Power on the cable or DSL modem and wait until the connection is active. STEP 5 Connect the power adapter to the firewall 12VDC port. CAUTION Use only the power adapter that is supplied with the firewall. Using a different power adapter could damage the device. The POWER button is on by default. The power light on the front panel is solid green when the power adapter is connected properly and the firewall is finished booting. STEP 6 Plug the other end of the adapter into an electrical outlet. Use the plug (supplied) specific to your country. STEP 7 Continue with the instructions in the Using the Setup Wizard to configure the firewall. 4 Cisco RV215W Wireless-N VPN Firewall 4 Using the Setup Wizard The Setup Wizard and Device Manager are supported on Microsoft Internet Explorer 6.0 or later, Mozilla Firefox 3.0 or later, and Apple Safari 3.0 or later. To configure the firewall by using the Setup Wizard: STEP 1 Power on the PC that you connected to the LAN1 port in Step 3 of the Connecting the Equipment section. Your PC becomes a DHCP client of the firewall and receives an IP address in the 192.168.1.xxx range. STEP 2 Launch a web browser window on your PC. STEP 3 In the address bar, enter the default IP address of the firewall, 192.168.1.1. A site security certificate message displays. The Cisco RV215W uses a self-signed security certificate. This message appears because the firewall is not known to your PC. STEP 4 Click Continue to this website (or the option shown on your particular web browser) to continue. The login displays. STEP 5 Enter the username and password. The default username is cisco. The default password is cisco. Passwords are case sensitive. STEP 6 Click Log In. The Router Setup Wizard starts. STEP 7 Follow the on-screen instructions to set up your firewall. The Router Setup Wizard tries to automatically detect and configure your connection. If it is unable to do so, it might ask you for some information about your Internet connection. Contact your ISP to obtain this information. STEP 8 Change the password as instructed by the Router Setup Wizard or follow the instructions the Changing the Administrator Username and Password section to do so. You are required to log into the device with the new username and password. The Getting Started page of the Device Manager appears. It displays the most common configuration tasks. STEP 9 Click one of the listed tasks or a task listed in the navigation bar to complete the configuration. STEP 10 Save any additional configuration changes and log out of the Device Manager. Cisco RV215W Wireless-N VPN Firewall 5 Changing the Administrator Username and Password To change the Administrator username and password on the firewall: STEP 1 From the Getting Started page, select Change Default Administrator Password or select Administration > Users. STEP 2 Check Edit Admin Settings. STEP 3 Enter a New Username in Administrator Account Settings. We recommend that you do not use cisco. STEP 4 Enter the old password. STEP 5 Enter the new password. Passwords should not contain dictionary words from any language or be the default password. They should contain a mix of uppercase and lowercase letters, numbers, and symbols. Passwords must be at least 8 but no more than 30 characters in length. STEP 6 Enter the new password again to confirm. STEP 7 Click Save. 6 Cisco RV215W Wireless-N VPN Firewall 5 Where to Go From Here Support Cisco Small Business Support Community www.cisco.com/go/smallbizsupport Cisco Small Business Support and Resources www.cisco.com/go/smallbizhelp Phone Support Contacts www.cisco.com/en/US/support/ tsd_cisco_small_business _support_center_contacts.html Cisco Small Business Firmware Downloads www.cisco.com/cisco/software/ navigator.html?i=!ch Select a link to download firmware for Cisco Small Business Products. No login is required. Product Documentation Cisco Small Business Routers and Firewalls www.cisco.com/go/smallbizrouters Cisco Small Business Cisco Partner Central for Small Business (Partner Login Required) www.cisco.com/web/partners/sell/smb Cisco Small Business Home www.cisco.com/smb Cisco RV215W Wireless-N VPN Firewall 7 Americas Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 USA www.cisco.com Small Business Support, Global: www.cisco.com/go/sbsc 78-20778-01 Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: www.cisco.com/go/trademarks. Third-party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (1110R) © 2012 Cisco Systems, Inc. All rights reserved.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Page Count : 8 Page Mode : UseOutlines Format : application/pdf Title : Cisco RV215W Wireless-N VPN Firewall Quick Start Guide (English) Producer : iText 1.4.1 (by lowagie.com) Keywords : Cisco RV215W Wireless-N VPN Router:Products Country : US Date : 2/11/2013 9:44:41 AM Language : en Secondary Concept : Creator : FrameMaker 7.2 Access Level : Guest,Customer,Partner Concept : Cisco RV215W Wireless-N VPN Router Modify Date : 2012:07:03 14:16:53Z Ia Path : cisco.com#Products#Cisco Products#Routers#Small Business Routers#Cisco Small Business RV Series Routers#Cisco RV215W Wireless-N VPN Router Create Date : 2008:08:12 21:49:27Z Doc Type : Author : tdobrovo Description : Content Type : cisco.com#US#postSalesEXIF Metadata provided by EXIF.tools