Cisco Systems EFGH-BTS1-38 Base Station User Manual BTS Hardware Installation Commissioning Guide
Cisco Systems, Inc Base Station BTS Hardware Installation Commissioning Guide
Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 273488 |
| Application ID | h2Q1TMN0rUn1hVOi2EIBjg== |
| Document Description | Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 6.87kB (85903 bits) |
| Date Submitted | 2002-09-27 00:00:00 |
| Date Available | 2002-09-27 00:00:00 |
| Creation Date | 2002-09-19 17:48:25 |
| Producing Software | Acrobat Distiller 4.05 for Windows |
| Document Lastmod | 2002-09-19 17:48:32 |
| Document Title | BTS Hardware Installation & Commissioning Guide |
| Document Creator | Microsoft Word 9.0 |
| Document Author: | Navini Networks |
Ripwave 2.6 GHz Base Base Station Hardware Installation and Commissioning Guide Version 1.0.0 Part Number 40-00047-00 Revision A Ripwave 2.6 GHz Base Station Installation and Commissioning Guide ii Navini Networks, Inc. Ripwave 2.6 GHz Base Station Installation and Commissioning Guide Navini Networks, Inc. TABLE OF CONTENTS REGULATORY INFORMATION ............................................................................................ VII SAFETY ...................................................................................................................................... VIII Introduction ........................................................................................ Error! Bookmark not defined. Purpose................................................................................................ Error! Bookmark not defined. Scope.................................................................................................... Error! Bookmark not defined. Acronyms ............................................................................................ Error! Bookmark not defined. Electronic Forms ................................................................................ Error! Bookmark not defined. CHAPTER 1 .................................................................... ERROR! BOOKMARK NOT DEFINED. Ripwave 2.6 GHz BTS System Installation ..................................... Error! Bookmark not defined. Ripwave 2.6 GHz BTS Equipment ................................................... Error! Bookmark not defined. Base Transceiver Station (BTS)................................................... Error! Bookmark not defined. Panel Radio Frequency Subsystem (RFS) ................................... Error! Bookmark not defined. Mounting Rack and Enclosures ................................................... Error! Bookmark not defined. Equipment Materials Specifications................................................. Error! Bookmark not defined. Ripwave 2.6 GHz Base Station Specifications ................................. Error! Bookmark not defined. General ......................................................................................... Error! Bookmark not defined. Accessibility................................................................................. Error! Bookmark not defined. Five watt system........................................................................... Error! Bookmark not defined. Fourteen watt system.................................................................... Error! Bookmark not defined. Resources ............................................................................................ Error! Bookmark not defined. Preparing the Site............................................................................... Error! Bookmark not defined. Site Survey ................................................................................... Error! Bookmark not defined. Backhaul Connections.................................................................. Error! Bookmark not defined. Power Requirements for the BTS ................................................ Error! Bookmark not defined. Ground Requirements for the BTS .............................................. Error! Bookmark not defined. Installing the Antenna Ground Buss Bar ..................................... Error! Bookmark not defined. Installing the Base Station System Ground Buss Bar and Surge Protectors......Error! Bookmark not defined. Installing the System Ground Wiring .......................................... Error! Bookmark not defined. Installing Cables between the BTS and the RFS/GPS ................. Error! Bookmark not defined. Determining Cable Length....................................................... Error! Bookmark not defined. Installing Connectors on the Cables......................................... Error! Bookmark not defined. iii Ripwave 2.6 GHz Base Station Installation and Commissioning Guide Navini Networks, Inc. Sweeping the Individual Cables............................................... Error! Bookmark not defined. Installing the BTS Mounting Rack and/or Enclosure .................. Error! Bookmark not defined. Installing the BTS Power Supply and Batteries........................... Error! Bookmark not defined. Installing the Power Supply ..................................................... Error! Bookmark not defined. Installing the Batteries.............................................................. Error! Bookmark not defined. Connecting the Power Supply to the Batteries......................... Error! Bookmark not defined. Run Power Supply Wiring to the BTS Chassis............................ Error! Bookmark not defined. Installing the BTS Equipment .......................................................... Error! Bookmark not defined. Installing the BTS Chassis ........................................................... Error! Bookmark not defined. Connect the Power Supply to the BTS Card Cage....................... Error! Bookmark not defined. Check Ground Connections and Input Power.............................. Error! Bookmark not defined. Ground Connections ................................................................ Error! Bookmark not defined. Power Connections .................................................................. Error! Bookmark not defined. Installing the GPS Antennas ............................................................. Error! Bookmark not defined. Installing the Radio Frequency Subsystem Antenna Assembly .... Error! Bookmark not defined. Verify RFS Operation .................................................................. Error! Bookmark not defined. Installing the Mounting Brackets ................................................. Error! Bookmark not defined. Installing the RFS Antenna Assembly ......................................... Error! Bookmark not defined. Check for proper down tilt angle of the RFS antenna.................. Error! Bookmark not defined. Install the Surge Protectors on the RFS ....................................... Error! Bookmark not defined. Install the Cables Between the RFS and the BTS ........................ Error! Bookmark not defined. Install Grounding Kit on Cables .................................................. Error! Bookmark not defined. Connect Ground Wires to the Ground Buss Bar.......................... Error! Bookmark not defined. Testing the RFS and Cables ......................................................... Error! Bookmark not defined. Weatherize the RFS Cable Connectors ........................................ Error! Bookmark not defined. Connecting the RF cables and Alarms to the BTS....................... Error! Bookmark not defined. Install the BTS Circuit Cards into the Chassis ............................... Error! Bookmark not defined. CHAPTER 2 .................................................................... ERROR! BOOKMARK NOT DEFINED. BTS System Power Up and Test ....................................................... Error! Bookmark not defined. BTS System Power Up and Provisioning......................................... Error! Bookmark not defined. BTS Provisioning Configuration ...................................................... Error! Bookmark not defined. BTS Configuration Setup............................................................. Error! Bookmark not defined. BTS Power Up and Configuration ............................................... Error! Bookmark not defined. Standard boot initialization sequence....................................... Error! Bookmark not defined. Invoking BTS Configuration ................................................... Error! Bookmark not defined. Boot Prompt ............................................................................. Error! Bookmark not defined. Ethernet WAN Configuration .................................................. Error! Bookmark not defined. T1/ATM WAN Configuration ................................................. Error! Bookmark not defined. T1/IMA WAN Configuration .................................................. Error! Bookmark not defined. Boot sequence line items.......................................................... Error! Bookmark not defined. iv Ripwave 2.6 GHz Base Station Installation and Commissioning Guide Navini Networks, Inc. Calibration of the BTS....................................................................... Error! Bookmark not defined. RF Sanity Test .................................................................................... Error! Bookmark not defined. Equipment Required..................................................................... Error! Bookmark not defined. Loss Procedure for Test Cable ..................................................... Error! Bookmark not defined. Receive verification ..................................................................... Error! Bookmark not defined. Transmitter verification................................................................ Error! Bookmark not defined. Drive Study Procedures..................................................................... Error! Bookmark not defined. Drive Test..................................................................................... Error! Bookmark not defined. Equipment required.................................................................. Error! Bookmark not defined. Drive Test Procedure................................................................ Error! Bookmark not defined. Location Test................................................................................ Error! Bookmark not defined. Equipment required.................................................................. Error! Bookmark not defined. Location Testing Procedure ..................................................... Error! Bookmark not defined. EMS Commissioning.......................................................................... Error! Bookmark not defined. BTS Commissioning for the Primary EMS ..................................... Error! Bookmark not defined. APPENDIX A: RFS AND CABLE TESTING ............ ERROR! BOOKMARK NOT DEFINED. Introduction ........................................................................................ Error! Bookmark not defined. Testing the RFS Data/Power Cable .................................................. Error! Bookmark not defined. Required Equipment..................................................................... Error! Bookmark not defined. Continuity test with VOM............................................................ Error! Bookmark not defined. Continuity test with Power/Data cable tester ............................... Error! Bookmark not defined. Sweep Test of the RF cables and the RFS........................................ Error! Bookmark not defined. Required Equipment..................................................................... Error! Bookmark not defined. Calibration of test setup ............................................................... Error! Bookmark not defined. RF Cable Insertion Loss............................................................... Error! Bookmark not defined. Navini RFS Test Box setup.......................................................... Error! Bookmark not defined. RFS only Transmit (TX) Mode Verification ............................... Error! Bookmark not defined. RFS only Receive (RX) Mode Verification................................. Error! Bookmark not defined. RFS and Cables, Transmit (TX) mode verification ..................... Error! Bookmark not defined. RFS and Cables, Receive (RX) Mode Verification ..................... Error! Bookmark not defined. Ripwave 2.6 GHz Base Station Installation and Commissioning Guide Navini Networks, Inc. Permissions, trademarks, and distribution Copyright © November 2001 - 2002, Navini Networks, Inc. All information contained herein and disclosed by this document is confidential and the proprietary property of Navini Networks, Inc. and all rights therein are expressly reserved. Acceptance of this material signifies agreement by the recipient that the information contained in this document is confidential and that it will be used solely for the purposes set forth herein. Acceptance of this material signifies agreement by the recipient that it will not be used, reproduced in whole or in part, disclosed, distributed, or conveyed to others in any manner or by any means – graphic, electronic, or mechanical, including photocopying, recording, taping, or information storage and retrieval systems – without the express written permission of Navini Networks, Inc. Navini Networks™, Internet at the Speed of Thought™, zero-install™, and Ripwave™ are registered trademarks of Navini Networks, Inc. Other product and company names mentioned herein may be trademarks and/or service marks of their respective owners. Nothing herein constitutes any representation, warranty, assurance, or guaranty of any kind. Because of continuing developments and improvements in design, manufacturing, and deployment, material in this document is subject to change without notification and does not represent any commitment or obligation on the part of Navini Networks, Inc. Navini Networks, Inc. shall have no liability for any error or damages resulting from the use of this document. The logo and all other Navini Networks trademarks are the property of Navini Networks, Inc. Unauthorized usage is strictly prohibited without the express written permission of Navini Networks, Inc. 2001 - 2002 Navini Networks, Inc. All rights reserved. vi Ripwave 2.6 GHz Base Station Installation and Commissioning Guide Navini Networks, Inc. Regulatory Information FCC Compliance and Advisory Statement This equipment has been tested and found to comply with the limits for a class A digital device, Pursuant to Part 15 of the FCC rules. The operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at their own expense. INFORMATION TO USER Any changes or modifications of equipment not expressly approved by Navini Networks could void the user’s authority to operate the equipment and the company’s warranty. WARNING: This device is intended to be used with an antenna professionally installed on a fixed, outdoor structure. A minimum separation distance of 1 meter should be maintained between the radiating elements and any persons in order to ensure compliance with the FCC rules for Radio Frequency Exposure. Installation where this minimum distance cannot be maintained may result in exposure to RF levels that exceed the FCC limits and is discouraged. vii Ripwave 2.6 GHz Base Station Installation and Commissioning Guide Navini Networks, Inc. Safety To optimize safety and expedite installation and service, read this document thoroughly. Follow all warnings, cautions, and instructions marked on the equipment and/or included in this document. Navini Networks, Inc. expressly requires that only technically qualified and authorized personnel be allowed to install, service, or operate the equipment. To aid in the prevention of injury and damage to property, cautionary symbols have been placed in this document to alert the reader to known potentially hazardous situations, equipment, or procedures. The symbols are placed before the procedures to which they apply. However, any situation that involves heavy equipment and/or electricity can become hazardous, and caution and safety should be practiced at all times when installing, servicing, or operating the equipment. viii Ripwave 2.6 GHz Base Station Installation and Commissioning Guide Navini Networks, Inc. Symbols Throughout this manual, the following symbols are used to designate precautions that need to be taken when performing the step. For your safety and protection of the equipment, observe these precautions when installing, operating, or servicing the equipment. Caution Symbol This symbol indicates a potentially hazardous situation that may result in equipment damage or improper operation. Warning Symbol This symbol indicates a potentially hazardous situation that may result in death or injury to personnel. Notes Symbol This symbol indicates points, comments, or special attention that is required during a procedure. Notes ix
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.2 Linearized : No Producer : Acrobat Distiller 4.05 for Windows Creator : Microsoft Word 9.0 Modify Date : 2002:09:19 17:48:32-05:00 Author : Navini Networks Title : BTS Hardware Installation & Commissioning Guide Create Date : 2002:09:19 17:48:25 Page Count : 9 Page Mode : UseNoneEXIF Metadata provided by EXIF.tools