Cisco Systems SA520W01 Security Appliance with Wireless User Manual Roubaix QuickStart REV

Cisco Systems Inc Security Appliance with Wireless Roubaix QuickStart REV

Manual 2

Quick Start GuideProduct Graphic HereREVIEW DRAFT—CISCO CONFIDENTIALCisco Small Business ProSA520, SA520W, and SA540 Security AppliancesPackage Contents•SA5XX Series Security Appliance•Mounting Hardware•Rubber Feet for Desktop Mounting•Quick Start Guide•SA5XX Series CDProduct OverviewThank you for choosing the Cisco Small Business Pro SA5XX Series security appliance. The SA5XX series is a family of three security appliances designed to provide enterprise grade security gateway solutions with VPN support, with 802.11n Access Point capabilities Not (supported on all models). These devices allow you to easily setup VPN tunnels and quickly connect to wireless 11n clients through secure or open links. The GUI provides all the capabilities for novice and advanced users to administer this secure and stable security appliance.This guide is designed to familiarize you with the general layout of the device, and how to begin installing them in a standard configuration. Your particular model may not have all of the features or functionality described in this guide. For more detailed information on the individual security appliance, see the SA5XX Series Administration Guide.Front PanelThe LEDs and Status Indicators are located on the front panel of the security appliance.SA-520 Front PanelSA-540 Front PanelRESET—Push the Reset button to reboot the device. Press and hold for 5 seconds to restore the factory default settings.SYSTEM•DIAG—When lit, indicates that the appliance is booting. When off, the appliance has booted properly. 1POWER—(Green) This LED lights up and remains lit when the appliance is powered on.DMZ—(Green) This LED lights up and remains lit when the the optional port is configured as DMZ.WAN—(Green or Orange) This LED indicates either 100Mbps or 1000Mbps speed on the WAN port.WLAN—(Green) This LED indicates Wireless status. There is one LED for one for 2.4GHz mode and one for the other one for 5GHz mode.LAN Ports 1-4—The security appliance is equipped with auto-sensing, Ethernet (802.3) network ports, which use RJ-45 connectors. The Fast Ethernet ports support network speeds of 10 Mbps, 100 Mbps, or 1000 Mbps. Each Green LED lights up when a connection is made through its corresponding port. It flashes when the corresponding port is active. Each Orange LED lights up when a high speed (1000Mbps) connection is made through its corresponding port. It flashes when the corresponding port is active.Back PanelThe back panel is where you will connect the security appliance to power, LAN Ports, the WAN.A USB port is also available.SA-520 Back PanelSA-540 Back PanelSA-520W Back PanelPOWER—The power port is where you will connect the security appliance to power using the supplied cable.OPTIONAL—The OPTIONAL port is where you will connect the security appliance to the WAN/LAN/DMZ port.WAN—The WAN port is where you will connect the security appliance to uplink devices using an RJ-45 cable.POWER SWITCH—Use this switch to power the security appliance on or off.USB—The USB port is where you will connect the security appliance to a USB device.Side PanelsThe side panels have holes for attaching mounting brackets. See the Placement Options section for details. Placement OptionsThe security appliance can be placed on a desktop, a rack, or mounted on a wall. If you choose the desktop option, install the four rubber feet (included) on the bottom of the security appliance.2Wall Mount with Mounting ScrewsSTEP 1Insert two 17 mm screws, with anchors, into the wall 150 mm apart.STEP 2Position the unit so that the wall-mount slots are over the two screws. Slide the unit down until the screws fit snugly into the wall-mount slots.
Americas HeadquartersCisco Systems, Inc.170 West Tasman DriveSan Jose, CA 95134-1706USAhttp://www.cisco.comTel: 408 526-4000800 553-NETS (6387)Fax: 408 527-0883Cisco, Cisco Systems, the Cisco logo, and the Cisco Systems logo are registered trademarks ortrademarks of Cisco Systems, Inc. and/or its affiliates in the United States and certain othercountries. All other trademarks mentioned in this document or Website are the property of theirrespective owners. The use of the word partner does not imply a partnership relationship betweenCisco and any other company. (0705R)78-xxxxx-xxRack Mount Instruction Tips•Ambient Temperature—To prevent the security appliance from overheating, do not operate the security appliance in an area that exceeds an ambient temperature of 104 degrees (40 C).•Size—The security appliance can be mounted in any standard size, 19-inch wide rack. Each security appliance requires 1RU of space.•Reduced Air Flow—If you install the security appliance in a rack, be sure that there is adequate air flow as required.•Mechanical Loading—Be sure that the security appliance is level and stable when you mount the security appliance in a rack to avoid any hazardous condition.•Circuit Overloading—Do not overload the power outlet or circuit when installing multiple devices in a rack.•Reliable Grounding—Be sure that the security appliance is grounded and use suitable electrical supply connections.To use the rack-mount option, refer to the graphic and follow these instructions:STEP 1Remove the four screws from each side of the security appliance. Retain the screws for re-installation.STEP 2Place one of the supplied spacers on the side of the Ethernet security appliance so the four holes align to the screw holes.STEP 3Place a rack mount bracket next to the spacer and reinstall the four screws removed in step 1.NOTE If your screws are not long enough to reattach the bracket with the spacer in place, attach the bracket directly to the case without the spacer.STEP 4Using the supplied hardware, screw the mounting brackets into place on both sides of the security appliance as shown.STEP 5After the mounting hardware has been securely attached, the security appliance is now ready to be installed into a standard 19-inch rack as shown.InstallationPerform the steps in this section to install the hardware.STEP 1Connect the supplied power cord to an electrical outlet.STEP 2For end user devices, connect an Ethernet network cable to one of the numbered ports on the security appliance. Connect the other end to a computer or other network device.STEP 3For uplink devices, connect an Ethernet network cable to the WAN port on the security appliance.NOTE Cisco strongly recommends using Cat5e or better cable.STEP 4Power on the devices connected to the security appliance. Each active port’s corresponding LED will light up on the security appliance.Congratulations! The installation of the security appliance is complete!Configuring the Security ApplianceThis section contains information for starting the configuration utility.To start configuring the security appliance, follow these steps:STEP 1Open a web browser.STEP 2Enter the device’s IP address in the address bar and press Enter. The Enter Network Password Page opens:STEP 3Enter a user name and password. The default user name and password are cisco/cisco. Passwords are both case sensitive and alpha-numeric.34STEP 4Click Login. The Configuration Utility Page opens.Details about configuring the security appliance are found in the SA5XX Series Administration Guide.SpecificationsnoitacificepSmetIStandards IEEE 802.3, 802.3u, 802.3x, 802.3ab x1 ,NAW x1 ,strop spbG1 54-JR x4 :025ASstroPoptional for LAN/WAN/DMZSA520W: 4x RJ-45 1Gbps ports, 1x WAN, 1x optional for LAN/WAN/DMZSA540: 8x RJ-45 1Gbps ports, 1x WAN, 1x optional for LAN/WAN/DMZCabling Type Cat5 Ethernet 8-1 .W025AS ,025AS rof 4-1 TCA/KNIL ,rewoPsDELfor SA540.Security Feature Security SlotDimensions 12.1” x 7.08” x 1.73” (308 mm x 180 mm x 44 mm)Unit Weight 3.03 lbs. (1.376kg)Power AC 90V~264VCertification FCC/IC (USA/Canada) EMI: Part 15B/ICES-003FCC (USA) ; Wireless, Part 15CIC (Canada) ; Wireless, RSS-210UL/cUL (USA/Canada) Safety: UL 60950-1CE (Europe) EMI EN 55022, EN 55024, EN 60950-1CE (Europe) ; Wireless, EN 301 489 -1 & -17 , EN300 328Frequency Authority for 28 CountryC-tick (Australia and New Zealand) AS/NZS CISPR22CB (worldwide) IEC6090-15Where to Go From HereOperating Temperature 0ºC to 40ºC (32ºF to 104ºF)Storage Temperature -20ºC to 70ºC (-4ºF to 158ºF)Operating Humidity 10 to 90%, relative humidity, Non-CondensingStorage Humidity 5% to 90% Non-CondensingResource LocationTechnical Documentationwww.cisco.com/en/US/products/ps#####/prod_maintenance_guides_list.htmlCustomer Support www.cisco.com/en/US/support/tsd_cisco_small_business_support_center_contacts.htmlWarranty and End User License Agreementwww.cisco.com/go/warrantyOpen Source License Noticeswww.cisco.com/go/oslnRegulatory Compliance and Safety Informationwww.cisco.com/en/US/products/ps#####/prod_maintenance_guides_list.htmlCisco Partner Central site for Small Businesswww.cisco.com/web/partners/sell/smb/6

Navigation menu