Clarity A Division of Plantronics W435 900MHz 40 Channel Analog Modulation Cordless Phone User Manual W435Gd repro

Download:
Mirror Download [FCC.gov]
Document ID	354479
Application ID	S9O2UUK8b2hlc+/dn4CQgw==
Document Description	FCC Information
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	23.4kB (292517 bits)
Date Submitted	2003-09-08 00:00:00
Date Available	2003-09-08 00:00:00
Creation Date	2003-08-11 11:20:42
Producing Software	Acrobat Distiller 4.0 for Macintosh
Document Lastmod	2003-08-11 11:20:53
Document Title	W435Gd_repro
Document Creator	QuarkXPressª: AdobePS 8.8.0 (301)
Document Author:	Jon Cornwell

W435Gd_repro
7/6/03
12:41 PM
Page 20
Regulatory Compliance
h) Connection to party line service is subject
to state tariffs. Contact the state public utility
commission, public service commission or
corporation commission for information.
device, pursuant to Part 15 of FCC rues.
These limits are designed to provide reasonable protection against harmful interference
in residential installation.
i) If your home has specially wired alarm
equipment connected to the telephone line,
ensure the installation of this telephone equipment does not disable your alarm equipment.
If you have questions about what will disable
alarm equipment, consult your telephone
company or a qualified installer.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful interference
to radio communications. However, there is
no guarantee that interference will not occur
in a particular installation; if this equipment
does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on,
you are encouraged to try to correct the interference by one of the following measures:
j) This telephone equipment is hearing aid
compatible.
Customer-Owned Coin/Credit Card Phones:
To comply with state tariffs, the telephone
company must be given notification prior to
connection. In some states, the state public
utility commission, public service commission
or corporation commission must give prior
approval of connection.
Part 15 of FCC Rules Information
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following
two conditions: (1) This device may not cause
harmful interference, and (2) this device
must accept any interference received,
including interference that may cause undesired operation.
Your equipment has been tested and found to
comply with the limits of a Class B digital
1. Where it can be done safely, reorient
the receiving television or radio
antenna.
2. To the extent possible, relocate the
television, radio or other receiver with
respect to the telephone equipment.
(This increases the separation
between the telephone equipment and
the receiver.)
3. Connect the telephone equipment into
an outlet on a circuit different from
that to which the television, radio, or
other receiver is connected.
4. Consult the dealer or an experienced
Radio/TV Technician for help.
IMPORTANT INFORMATION FOR CUSTOMERS
20
W435Gd_repro
7/6/03
12:41 PM
Page 21
Regulatory Compliance
CAUTION: Changes or modifications not
expressly approved by the manufacturer
responsible for compliance could void the
userís authority to operate the equipment.
power utility, telephone lines and internal
metallic water pipe system, if present, are
connected together. This precaution may be
particularly important in rural areas.
Industry Canada Technical Specifications
CAUTION: Users should not attempt to make
such connections themselves, but should contact the appropriate electrical inspection
authority, or electrician, as appropriate.
This product meets the applicable Industry
Canada technical specifications.
Before installing this equipment, users should
ensure that it is permissible to be connected
to the facilities of the local telecommunications company. The equipment must also be
installed using an acceptable method of connection. In some cases, the companyís inside
wiring associated with a single line individual
service may be extended by means of a
certified connector assembly (telephone extension cord). The customer should be aware
that compliance with the above conditions
may not prevent degradation of service in
some situations.
Repairs to certified equipment should be
made by an authorized Canadian maintenance facility designated by the supplier.
Any repairs or alterations made by the
user to this equipment, or equipment malfunctions, may give the telecommunications company cause to request the user to disconnect
the equipment.
The Ringer Equivalence Number is an indication of the maximum number of terminals
allowed to be connected to a telephone interference. The termination on an interference
may consist of any combination of devices
subject only to the requirement that the sum
of the Ringer Equivalence Numbers of all the
devices does not exceed five.
(The term ìIC:î before the certification/registration number only signifies that the Industry
Canada technical specifications were met.)
The party responsible for regulatory
compliance:
Walker, A Division of Plantronics, Inc.
4289 Bonny Oaks Drive, Suite 106
Chattanooga, TN 37406
Phone: 1-800-552-3368
The following warranty and service information applies only to products purchased and
Users should ensure for their own protection
that the electrical ground connections of the
IMPORTANT INFORMATION FOR CUSTOMERS
21

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Modify Date                     : 2003:08:11 11:20:53+08:00
Create Date                     : 2003:08:11 11:20:42+08:00
Title                           : W435Gd_repro
Author                          : Jon Cornwell
Creator                         : QuarkXPressª: AdobePS 8.8.0 (301)
Producer                        : Acrobat Distiller 4.0 for Macintosh
Page Count                      : 2

EXIF Metadata provided by EXIF.tools