Climax Technology Co SAMS1 Fire Alarm Audio Detector User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3956602
Application ID	jAef3zK0Orsfkhmc7sdHhQ==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	6.37kB (79572 bits)
Date Submitted	2018-08-08 00:00:00
Date Available	2018-08-08 00:00:00
Creation Date	2018-06-20 16:28:01
Producing Software	Acrobat Distiller 11.0 (Windows)
Document Lastmod	2018-08-06 17:35:22
Document Title	Microsoft Word - FP Hub FCC Installation Guide (002).docx
Document Creator	PScript5.dll Version 5.2.2
Document Author:	PCUser

Fire Alarm Audio Detector (SAMS-1)
The Audio Detector is designed to be used with any smoke detector compliant with UL 985 standard. The
Audio Detector detects alarm sound raised by the smoke detector and transmits wireless alarm signal to
notify Climax security system control panel upon detection.

Parts Identification
Red Indicator (Inside)
The LED indicators are inside the front cover and only visible when activated.

Briefly On: Transmitting signal.

Continuous quick flash: Alarming

Flashes every 4 seconds: Battery Exhausted.
Microphone
Learn / Test Button


Press the button once to send a learn code.
Battery Compartment
Wall Mounting Knockouts
Supervision Function
When the Audio Detector is in normal operation, it will transmit a supervision signal regularly every
30~50 minutes.

Battery
The Audio Detector uses a 3V CR123A Lithium battery.
The Audio Detector can detect low battery voltage. When low battery voltage is detected, a low battery
signal will be sent to the Control Panel along with regular signal transmissions for the Control Panel to
display the status accordingly. When the battery is exhausted, the device will stop all function and the
LED will flash every 4 seconds to indicate.
When changing battery, press the learn/test button a couple times to discharge after removing battery
before inserting a new one.

Getting Started
1 Insert the battery to power on the device.
2 Put the Control Panel into learning mode, refer to panel manual for detail.
3 Press the Learn/Test button once to transmit learn code to panel.
4 Refer to panel manual to complete learning process.
Note: When learnt into the alarm system, the Audio Detector is recognized as a Smoke Detector in the
system.

Alarm Detection and Restore

The Audio Detector recognizes alarm sound pattern raised by UL certified Smoke Detector. When
activated, the Audio Detector will transmit alarm signal to notify the Control Panel of smoke detection.
The LED indicator will flash rapidly.
 When the alarm sound from Smoke Detector has stopped, the Audio Detector will check alarm for 12
seconds.
- If the alarm sounds again within the 12-second period, the Audio Detector will not perform any
action.
- If the alarm does not sound again within the 12 second period, the Audio Detector will wait for
another 160 seconds. If 160 seconds passes without any alarm, the Audio detector will transmit an
alarm restore signal
- If the alarm sounds again after the 12-second period, the Audio Detector will resend alarm signal.

Installation
The Audio Detector should be mounted on ceiling or wall. The Detector back cover has mounting
knockouts which can be broken for screw mounting. Alternatively, you may also mount the detector
with double side adhesive tape provided.
The Audio Detector should be mounted within 15 cm of the Smoke Detector
Screw Mounting
1 Break through the knockouts on back cover and use them as template to mark position on wall/ceiling.
2 Drill holes at marked location and screw the back cover onto the wall/ceiling, insert wall plug if needed.
3 Replace the Detector main body onto the back cover. Make sure the cover is properly closed and the
device is fixed to the wall tightly.
Adhesive Tape Mounting
When using provided double side adhesive tape, make sure to install the detector on flat surface. Do not I
install on uneven surface or location with cracking paints.
1 Clean both the detector back cover and mounting location with suitable degreaser.
2 Apply the double side adhesive tape to back cover of detector, then apply to mounting location.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Author                          : PCUser
Create Date                     : 2018:06:20 16:28:01+08:00
Modify Date                     : 2018:08:06 17:35:22+08:00
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Format                          : application/pdf
Creator                         : PCUser
Title                           : Microsoft Word - FP Hub FCC Installation Guide (002).docx
Creator Tool                    : PScript5.dll Version 5.2.2
Metadata Date                   : 2018:08:06 17:35:22+08:00
Producer                        : Acrobat Distiller 11.0 (Windows)
Document ID                     : uuid:c8019d3a-a77f-4216-89ca-38bf2b138b83
Instance ID                     : uuid:5aa964d0-ffaa-49e2-85ff-e60628a29f31
Page Count                      : 2

EXIF Metadata provided by EXIF.tools