Climax Technology Co WSL Water Sensor User Manual WSL 20120702 new

Download:
Mirror Download [FCC.gov]
Document ID	1792469
Application ID	lPZ4zr3l3xE8cEdsBppLGg==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	10.43kB (130350 bits)
Date Submitted	2012-09-14 00:00:00
Date Available	2012-09-14 00:00:00
Creation Date	2012-07-06 09:20:28
Producing Software	Acrobat Distiller 8.0.0 (Windows)
Document Lastmod	2012-07-06 09:20:28
Document Title	Microsoft Word - WSL 20120702_new_.doc
Document Creator	PScript5.dll Version 5.2.2
Document Author:	user

WSL Water Sensor
The Water Sensor is designed to detect if the water level is above a certain level that may damage your
protected goods. When water level is above your installed level, the Water Sensor will send signal to URL for it
to react accordingly.
1. LED
2. Buzzer
3. Battery
4. Function Switch Block
5. Antenna
6. Probe
7. Protective Cover
z Function Switch Block
Sliding down the protective cover carefully; you can see a switch block set which consists of 8 switches
marked as 1 ~ 8 from left to right. When the switch is in up position, it indicates the “+ mode. When the
switch is in middle position, it indicates the “0” mode. When it is situated in down position, it indicates the
“-” mode. Slide all 8 switches to make them identical to your URL switch setting. This will connect the
WSL to URL and allow URL to received signal from WSL.
z POWER SUPPLY:
The Water Sensor uses a 12V alkaline battery as its power source.
z INSTALLATION:
The Water Sensor can be installed in 2 ways:
a) Place on an even surface to stand on 2 sponge feet.
b) Mount on wall surface according to the height of water detection level you desire.
Step1: Clean the surface with a suitable degreaser.
Step2: With the provided VELCRO soft tape and hard tape held together, remove the protective cover
from the soft tape and firmly apply to back of device,
Step 3: Next remove the protective covering from the hard tape and firmly press the device onto the
desired location.

Do not mount on a surface with peeling or cracked paint, or on a rough surface.
z NORMAL OPERATION:
When the Probes come in contact with water, the LED will light up and the Buzzer will buzz. The
Water Sensor will transmit signal to URL for the URL to react accordingly.
z
After the water ebbs and the Probes are no longer in contact with water, the LED will turn off and
the buzzing will stop.

After the water ebbs and the probes are no longer in contact with water, please
ensure that the Probes are wiped dry.
FCC&IC Caution:
This device complies with Part 15 of the FCC Rules and Canada licence-exempt RSS-210
standard. Operation is subject to the following two conditions:
OPERATIONS IS SUBJECT TO THE FOLLOWING TWO CONDITIONS:
(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE
(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING
INTERFEERENCE THAT MAY UNDESIRED OPERATION.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Creator Tool                    : PScript5.dll Version 5.2.2
Modify Date                     : 2012:07:06 09:20:28+08:00
Create Date                     : 2012:07:06 09:20:28+08:00
Format                          : application/pdf
Title                           : Microsoft Word - WSL 20120702_new_.doc
Creator                         : user
Producer                        : Acrobat Distiller 8.0.0 (Windows)
Document ID                     : uuid:acb63a4b-2977-4352-a892-a04b2cb3ecc2
Instance ID                     : uuid:1b325ec6-6d99-42fc-9f2b-5cce41e9707b
Page Count                      : 2
Author                          : user

EXIF Metadata provided by EXIF.tools