Climax Technology Co WT212 The Wrist Transmitter User Manual WT 212

Climax Technology Co Ltd The Wrist Transmitter WT 212

Users Manual

Download: Climax Technology Co WT212 The Wrist Transmitter User Manual WT 212
Mirror Download [FCC.gov]Climax Technology Co WT212 The Wrist Transmitter User Manual WT 212
Document ID1505380
Application IDffTIjbHQABgsXscxlBDL7g==
Document DescriptionUsers Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize2.38kB (29794 bits)
Date Submitted2011-07-20 00:00:00
Date Available2011-07-20 00:00:00
Creation Date2011-07-14 15:49:19
Producing SoftwareAcrobat Distiller 7.0 (Windows)
Document Lastmod2011-07-14 15:49:19
Document TitleMicrosoft Word - WT-212.doc
Document CreatorPScript5.dll Version 5.2.2
Document Author: TEST

The Wrist Transmitter (WT-212)
Long battery life/ Waterproof
Active Button
Pressing the Active Button for more than 1 sec
will activate the Main Unit, causing it to dial
emergency call or alarm.
When the Main Unit receives the alarm signal and
is being activated, you can stop the activity if
desired by pressing this button for more than 8
sec.
Pressing and holding the button for 8 seconds will
cancel the alarm. The Bell Box and Siren will stop
alarming.
After learning the WT-212 to the Main Unit,
pressing and holding the button for 15 sec (until
the LED flashes 3 times) will activate the
supervision function. The WT-212 will send a
signal to the Main Unit every 21 hours.
Active Button
Learn In WT-212
Every Wrist Transmitter has a unique numeric code called “ID code”. The ID code
enables the Main Unit to identify the signal is transmitted from the Wrist Transmitter.
At the same time, it also prevents interference from outside sources.
Step 1.
Put the Control Panel into “Device +/-” menu and then select “Add Device”
menu (or “Learning” Mode).
Step 2.
Press the Button on the WT-212, a radio signal will be transmitted to the control
panel.
Step 3.
Please refer to the operation manual of your control panel under the section of
“Device +/-” to complete the process.
Battery Life
The Wrist Transmitter uses one CR2032 3V Lithium battery as its power source.
The battery can last for more than 6 years.
If the battery voltage is low, a Low Battery signal will be send to the control panel to notify
the user.
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired
operation.
FCC Caution:
To assure continued compliance, any changes or modifications not expressly approved by the party
responsible for compliance may void the user's authority to operate this equipment. (Example - use only
shielded interface cables when connecting to computer or peripheral devices).

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0 (Windows)
Creator Tool                    : PScript5.dll Version 5.2.2
Modify Date                     : 2011:07:14 15:49:19+08:00
Create Date                     : 2011:07:14 15:49:19+08:00
Format                          : application/pdf
Title                           : Microsoft Word - WT-212.doc
Creator                         : TEST
Document ID                     : uuid:18705b30-401f-44f1-bdcf-0adf39cb952a
Instance ID                     : uuid:56e36630-6114-41fd-be1b-384573f18ad3
Page Count                      : 1
Author                          : TEST
EXIF Metadata provided by EXIF.tools
FCC ID Filing: GX9WT212

Navigation menu