Clipcomm BSH200 Bluetooth Analog Telephone adapter User Manual EMISSION TEST REPORT

Clipcomm, Inc. Bluetooth Analog Telephone adapter EMISSION TEST REPORT

User Manual

Order Number : GETEC-C1-12-289 FCC Part 15 subpart C Test Report Number : GETEC-E3-12-100 Page 1 / 1 EUT Type: Bluetooth Analog Telephone adapter FCC ID.: UXZBSH200 APPENDIX H : USER’S MANUAL
INSTRUCTIONS for use INSTALLATION GUIDE0000122272000001
Thank youThank you for choosing our product as your means to better hearing. To support your efforts, we have put great care and attention into making sure that your new Phone adapter has the highest quality and is easy to use and maintain. The Oticon landline phone solution (Phone adapter) enables you to make hands free phone conversation over most of the domestic area.The complete system description is documented on-line at www.oticon.com/phone. Here you will also find interactive presentations, “how to videos” and a support section with frequently asked questions.We recommend that you read this manual carefully to achieve the maximum benefit of your new Phone adapter, before you start to use it. If you have any questions to the use or maintenance of the Phone adapter, please contact your Hearing Care Professional.Indication for useThe Phone adapter is intended to be used together with the Oticon Streamer and Oticon wireless hearing instruments. This enables the hearing instrument user to communicate wirelessly with a phone conversation partner via a landline phone.
ContentsPackage content 7Phone adapter overview 8Warnings 10Installation 12Connecting the Phone adapter to a power outlet 14Connecting to phone line and landline phone 16Pairing the Streamer to the Phone adapter 18Technical information 22IMPORTANT NOTICEPlease familiarise yourself with the entire contents of this booklet before using your Phone adapter. It contains instructions and important information about the use and handling of your Phone adapter.
7Package contentPhone adaptor 2.0 – what is in the boxThe Phone adaptor box consists of the following elements:Phone adaptor Power supply Phone cablePLACEHOLDER PLACEHOLDERINSTRUCTIONS for use Streamer Pro INSTRUCTIONS for use Streamer ProThis guide (Instructions for use)PLACEHOLDER PLACEHOLDERNår forsider er godkendt og der ikke sidder placeholder på placerer jeg korrekte pdf-filer
8 9Phone adapter overviewBackPower supplyFrontPhone indicatorCondition Power indicator Phone indicatorPower On, no connection to the StreamerPairing with the StreamerThe Streamer is wirelessly connectedIncoming callPhone conversationFault condition No light Blinking SteadyOUTINAUXPOWERTo landline phoneTo PSTN wall plugConnectLine in/out*Power indicator* For more information please refer to: www.oticon.com/phone
10 11You should familiarize yourself fully with the following general warnings and the entire contents of this booklet before using your Phone adapter. Products to be connected to external equipment• The safety of the use of the Phone adapter with auxiliary input cable is determined by external signal source. When the input cable is connected to mains-operated equipment, this equipment must comply with IEC-60065, IEC-60601, IEC-60950 or equivalent safety standards.• The Phone adapter is designed to comply with the most stringent Standards of International Electromagnetic Compatibility. However, the Phone adapter might cause interference with other medical devices. Please contact relevant personnel to obtain permission before using the Phone adapter in hospitals or similar venues.• The Phone adapter is not a toy and therefore should be kept out of the reach of children and anyone else who might swallow parts or otherwise cause injury to themselves. Special attention should be paid to the smaller components in order to prevent children from swallowing them and choking.If a part is swallowed, see a doctor immediately. Warnings Warnings
12InstallationActivating the Phone adapter for the rst timeBefore you can use the landline phone solution together with your hearing instruments, the Phone adapter must be connected to a power outlet and the public telephone line. This is a step-by-step guide on how to install the Phone adapter.All needed parts for the installation are included in the package.
14 15Connecting the Phone adapter to a power outlet Use the power supply with USB cable from box no. 11. Plug the USB connector into the “power” connector on Phone adapter2. Plug the power supply into the mains wall socket or another power source3. Check that power is turned on 4. After a few seconds the power indicator will light green12Box 14.2.1.
16 17Connecting to phone line and landline phonePlace the Phone adapter unit in a suitable spot near your landline phone or base station. 1. Unplug the phone line from the landline phone (or base station).*2. Plug the phone line from the wall adapter into the Phone adapter “IN” connector. 3. Plug the tele cord from box 2 in the Phone adapter “OUT” connector. 4. Plug the other end of the tele cord into the landline phone (or base station).* Please lift off the handset from of your landline phone – you should now be able to hear the dial tone from the handset speaker.1 2 Box 23.2.1.4.* if your main phone or base station does not have a detachable plug for the landline connection, you should either try using an alternative phone or a technician must be contacted to complete the installation.
18 19Pairing the Streamer to the Phone adapterThe very first time your Streamer is used with the Phone adapter, the Streamer must be paired to the Phone adapter. For pairing:1. Make sure the Phone adapter is powered on, i.e. the power indicator is steady green.2. Press the Streamer connect button (Streamer) or on/off button (Streamer Pro) for 5-6 seconds until the blue light starts blinking.3. Place the Streamer on top of the Phone adapter – the pairing takes around 20–60 seconds.4. The pairing is completed when the power indicator on the Phone adapter and the on/off button on the Streamer turns steady blue. Pairing is done only once and will normally not have to be repeated.Streamer Pro Streamer2.4.2.
20PairingStreamer Protop statusStreamer ProfrontPhone adapterDescriptionStreamer and Phone adapter on (1)Streamer in pairing mode (2)Pairing complete (4) Steady Steady Blinking
22 23Technical informationThe emission power from the Phone adapter is well below international emission limits for Human Exposure. The Phone adapter complies with international standards concern-ing Electromagnetic Compatibility.This device complies with Part 15 of the FCC Rules. This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA.CAUTION: Any changes or modifications in construction of this device which are not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. To comply with FCC RF exposure requirements, the device and the antenna for this device must be installed to ensure a minimum separation distance of 20 cm or more from a person’s body. Other operating configurations should be avoided.Due to the limited size available on the device, many of the relevant approval markings are found in this document.
24 25This instrument contains a module with:FCC ID: UXZBSH200 (nye numre indsættes)IC: 1350B-BSH200The device complies with Part 15 of the FCC rules.Operation is subject to the following two conditions:1. This device may not cause harmful interference.2. This device must accept any interference received, including interference that may cause undesired operation.Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio fre-quency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.• Consult the dealer or an experienced radio/TV technician for help.
26Hereby, Oticon A/S declare that this Phone adapter is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.Declaration of conformity is available at:Oticon A/SKongebakken 9DK-2765 SmørumDenmarkwww.oticon.comThis product is intended for connection to the public switched analogue telephone network and may be operated in EU and EFTA countries.Use the following switch mode power supply with your Phone adapter: Sunlin SLA-A142DA, Input: 100-240V AC 200mA 50-60 Hz, Output: 5V DC 700mAWaste from electronic equipment must be handled according to local regulations. QD ID: B014507IC statementThis device complies with Industry Canada licence-exempt RSS standard (s).Operation is subject to the following two conditions:1) this device may not cause interference.2) this device must accept any interference, including interference that may cause undesired operation of the device.IC radiation exposure statement: This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Navigation menu