Clipcomm HCC100 Bluetooth Hands Free Car Kit User Manual

Clipcomm, Inc. Bluetooth Hands Free Car Kit

Contents

Users Manual I

HCC-100 User ManualBluetooth Hands-Free Car Kit
[Table of Contents]Before usePackage contentsDescription of partsRecommended installation position ChargingLow batteryBattery statusSolar power charging statusHow to usePower on/offPairingConnectingAnswering a callMaking a callEnding a callVolume controlFunctions during a callSummary of button functionsLED indication and signal soundSupplementTroubleshootingCautionsAdditional informationStandards and specificationsLimited warranty23446667791010111112131415161819 201
Before use2The Clipcomm HCC-100 is a solar-powered Bluetooth hands- free car kit with a slim and fashionable design. It provides crystal clear sound and excellent ease of use because of its simple and user-friendly interface.[Package contents]Ensure that the items mentioned below are all included in the package. If any item is missing, please contact the dealer.Hands-free car kitCar charger Suction cupsWindow mount User manualHCC-100 User ManualBluetooth Hands-Free Car Kit3M tapes
3Before use[Description of parts]MicrophoneVolume controls/MultifunctionbuttonSolarpanelStatus LEDSpeaker Charging portSuctioncup holeBattery status LEDSuctioncup hole3M tape3M tape
[Recommended installation position] It is recommended that the hands-free car kit be positioned and installed on the top-left of the windshield, as shown in the picture below. (The hands-free car kit can be installed using either 3M tapes or suction cups.) Installing the hands-free car kit in the recommended position will lead to more efficient solar power charging and better perfor-mance with regard to the microphone. Ensure that the hands-free car kit does not obstruct the driver’s view.[Charging]1. Using the car charger Open the cover on the charging port and insert the car charger completely into the charging slot until the battery status LED glows red. 4Before use
5Before useWARNING: Do not attempt to charge the hands-free car kit with any charger other than the one provided. Using another charger may damage or destroy the product. Charge your hands-free car kit until the battery status LED turns off. The unit will be fully charged in approximately 2 h. 2. Using solar power Direct the solar panel on the back of the hands-free car kit toward the sun. (Please refer to the recommended installation position, as mentioned above.) If the car kit receives sufficient sunlight for 3 h, you can talk for a duration of up to 30 min. Using solar power charge, the operation time (the talk time and the standby time) will be extended continuously without any additional charge required by the car charger. By pressing for 5 s, the solar power charging status is indicated. Please refer to the [Solar power charging status] below for the detailed instruction.
6[Low battery] The status LED will flash blue and the battery status LED will flash red simultaneously with a periodic beeping sound when the battery status is lower than 10% out of full charge. In this low battery status, the battery status LED and the status LED will operate simultaneously in the same way.  Charge the battery as soon as the abovementioned phenomenon is detected.  The product will turn off when the battery is not charged.[Battery status] By pressing and simultaneously and then releasing them briefly, the battery status is indicated by the number of red flashes with a beeping sound. [Solar power charging status]To check the solar power charging status, you can press for 5 s when the hands-free car kit turned on. If the car kit is receiving sufficient sunlight, the battery status LED will glow red. (Once the battery is fully charged, the battery status LED will turn off.) Before useNumber of red flashes and beepsTalking time4 timesMore than 7 h More than 5 h More than 3 h Up to 3 h3 times 2 times 1 time
7Press for 5 s again to turn off the battery status LED. It is recommended to turn off the battery status LED during the solar power charging. By doing this, the battery will be charged much faster and more sufficiently. [Power on]1. Press and hold for 2 s. 2. You will hear a booting tone and the status LED will briefly flash blue rapidly for 5 times.[Power off]1. Press and hold for 5 s.2. You will hear a shutdown tone and the status LED will briefly flash blue rapidly for 5 times.[Pairing]Before using your hands-free car kit with mobile phone for the first time, you must pair it with your Bluetooth mobile phone. (For the detailed set up and pairing instructions with mobile phone, please consult your mobile phone user guide.)1. Begin with the hands-free car kit turned off; then, press and hold down for 5 s.How to use
82. You will hear two short beeps after the booting tone, and the status LED will glow blue steadily.3. Go to the Bluetooth menu in your mobile phone and search for the hands-free option. You might need to search for options such as headset, audio device, etc. in case your mobile phone does not contain the hands-free option; these options, however, are subject to the model of the mobile phone being used. (Pairing with the hands-free profile is recommended since the user can utilize the various Bluetooth functions in this profile.)4. Select “HCC-100” from the list of searched devices.5. When prompted for a passkey, enter 0000.6. A beep will sound when the devices are paired successfully.7. After you have successfully paired your phone and the hands-free car kit, you do not need to repeat these steps each time you use the hands-free car kit with your mobile phone.The hands-free car kit will turn off automatically if it stays in the “pairing mode” for over 3 min without being paired to any device. In this case, you have to reattempt the pairing process (see abovementioned steps). The connection can be made automatically after pairing depending on the features of different models of mobile phones.How to use
[Connecting]To use hands-free car kit after pairing (or after losing the connec-tion), you should connect it to the paired mobile phone. For more details regarding the connection method, please refer to the manual of your Bluetooth mobile phone.Auto reconnection1. When the hands-free car kit turns off while connecting The hands-free car kit will be automatically reconnected without the paring process when the hands-free car kit turns on. (The mobile phone connected previously should be within 10 m from the car kit.)2. Out of range The hands-free car kit will be automatically reconnected when it is brought back within a 10-m range of the phone within 3 min. Please press once briefly to connect it immediately.9How to useWhen out of range (greater than 10 m), the connection between the hands-free car kit and the mobile phone will be dropped.If the hands-free car kit and the mobile phone have been separated for over 3 min, up to 10 min will be required for auto reconnection.The auto-reconnection function might not be activated; this again depends on the features of the different models of mobile phones. In this case, please press once briefly for manual reconnection.
10How to use[Answering a call]The hands-free car kit and mobile phone will ring simultane-ously when an incoming call is received. You can answer a call by pressing briefly. (The call can also be answered using the mobile phone.)Ringing muteIn order to activate the mute function when an incoming call is received, press and hold for 1 s; this will mute the ringing sound. (This function may be used to maintain silence inside the car.) To release the mute function, press and hold for 1 s again.Call reject*To activate the call reject function, press for 1 s when an incoming call is detected.[Making a call]Voice dialingPress and release once. You will hear the voice-activation tone; say the registered name on the voice dialing list.

Navigation menu