Coaxsys 5406X Network Adapter / Master User Manual

Coaxsys, Inc. Network Adapter / Master Users Manual

Users Manual

Coaxsys, Inc.718 University Avenue, suite 202Los Gatos, CA 950321-877-878-0036www.Coaxsys.com© Coaxsys, Inc. 2004. All rights reserved.TMIPTV 7000IPTV 7000Coaxsys IPTV 7000 Master & AdapterINSTALLATION GUIDE
Install the IPTV 7000 Master or AdaptercoaxoutletMASTER orADAPTERpoweroutletNOTE: For the best throughput and latency, the Master should be installed in the same room as your broadband access. 1. Using the included power supply, connect a Coaxsys Master (dark grey) or Adapter (light grey) to a power outlet. The Power link light should illuminate. 2. Using the included coax cable, connect a coaxial cable to the Coaxsys Master or Adapter and a wall outlet; the Coax link light should illuminate. 2Speed40MbpsConnectorsCoax (RG6) In, Coax (RG6) OutEthernet (RJ45), PowerLEDsPowerEthernet (RJ45) LinkCoax (RG6) LinkStandards10/100 Ethernet (802.3)Peer-to-Peer CommunicationsLatency< 1 msecBit Error Rate< 1 x 109Field Upgradable via EthernetDimensions6.3” x 5.4” x 1.1”161mm x 138mm x 30mmWeight.46 lbs (0.21 kg)Power Adapter5VDC 750mA Maximum Distance400 feet typical inclusive of splitters with either RG-59 or RG-6 cableOperating Temperature32F to 122F (0C to 50C)Storage Temperature-4F to 176F (-20C to 80C)Regulatory ComplianceFCC Part 15, ICAN Class BTechnical Specifications - Network Adapter or Master 7
Connecting to a Set Top Box MASTER or ADAPTERset top boxtelevisioncoaxoutletpoweroutletorange Ethernet cable1. Once the Master or Adapter has been installed, connect one end of the orange Ethernet cable to the Adapter or Master and the other end to the Set Top Box; the Ethernet link light should illuminate. See the manufacuturers instructions for connecting televisions, DVRs, game consoles, etc.3Install Notes • The Master is dark grey. Only one Master is allowed on a single network. • The Adapters are light grey. • Regular cable or on air TV services will not work with the IPTV 7000. However, satellite TV is compatible with the IPTV 7000 network• Coaxsys products will work with any coaxial topology, but the use of ampli ers should be avoided. • For the best throughput and latency, the Master should be installed in the same room as your broadband access. • Ethernet for the Adapter and Master only works in 10 Mb and 100 Mb full duplex mode.6
CoaxsysAdapterCoaxsysAdapterCoaxsysAdapterCoaxsysMasterEthernetswitch/routerDSL modemPCSet Top BoxSet Top BoxTelevisionTelevisionDisconnect the main cable/satellite provider cable going to the house.cable signal splitterSet Top BoxTelevisionSample Usage Diagram5Connecting to an Ethernet Switch/RouterpoweroutletcoaxoutletDSL modemPCblackEthernet cableEthernetswitch/routerMASTER or ADAPTERAn Ethernet switch/router may be used to increase the number of digital devices connected to the Master or Adapter.1. Connect one end of the black Ethernet cable to the Master or Adapter and the other end to the switch/router. The Ethernet link light should illuminate. See the manufacuturers instructions for connecting PCs, modems, etc.4
Install Notes • The Master is dark grey. Only one Master is allowed on a single network. • The Adapters are light grey. • Regular cable or on air TV services will not work with the IPTV 7000. However, satellite TV is compatible with the IPTV 7000 network.• Coaxsys products will work with any coaxial topology, but the use of ampli ers should be avoided. • For the best throughput and latency, the Master should be installed in the same room as your broadband access. • Ethernet for the Adapter and Master only works in 10 Mb and 100 Mb full duplex mode.6
CAUTION Use a shielded data cable connection between the parallel or serial data ports and peripherals of this equipment. CAUTION Other connections between peripherals of this equipment may be made with low voltage non-shielded computer data cables. CAUTION Network connections between the computer and the EUT consist of shielded CAT 5 cable. WARNING Use only the Coaxsys, Inc., specified wall adapter for this product. This Coaxsys, Inc. wall adapter enhances the system performance and increases the product safety features. WARNING The phrase "contains PULVER ™ Shield" on the Product Certification Label means Coaxsys, Inc. has elected to install this state-of-the-art technology dedicated to significantly reducing Electromagnetic Radiation and Interference. The PULVER ™ Shield protects this equipment and operators of this equipment from Electromagnetic Radiation beyond requirements of presently recognized product standards. For continued protection against Electromagnetic Radiation, replace only with same model and version of PULVER™ Shield: 12 dB µV/m maximum attenuation from 30 to 1000 MHz.
FCC NOTICE INFORMATION FOR THE USER This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: 1) Reorient or relocate the receiving antenna. 2) Increase the separation between the equipment and receiver. 3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 4) Consult the dealer or an experienced radio/TV technician for help. The user may find the following publication prepared by the Federal Communications Commission helpful: "How to Identify and Resolve Radio-TV Interference Problems" (Stock Number 004-000-00345-4). Available exclusively from the Superintendent of Documents, Government Printing Office, Washington, DC 20402 (telephone 202-512-1800). FCC WARNING Changes or modifications not expressly approved by the party responsible for compliance to Part 15 of the FCC Rules could void the user's authority to operate the equipment. ICAN Class B Digital Equipment This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. Cet appareil numérique de la classe B respecte toutes les exigences due Réglement sur le matériel brouilleur du Canada.

Navigation menu