Cobra Electronics 7600 Pro Quick Start Manual

7600 Pro - Quick Start Guide 7600PRO_QSG_EN Free User Guide for Cobra GPS, Manual

: Cobra-Electronics Cobra-Electronics-7600-Pro-Quick-Start-Manual-774516 cobra-electronics-7600-pro-quick-start-manual-774516 cobra-electronics pdf

Open the PDF directly: View PDF .
Page Count: 8

7600 PRO

MANUAL

Start Up

IMPORTANT!

It is the user’s responsibility to account for the vehicle’s height,

width, length, HAZMAT, and other restrictions while driving.

Always follow posted road signs and be aware of road conditions

when making driving decisions.

Please read the “Important Safety Information” included with

your unit. Power Key

SD Card Slot

External Speaker Jack

Mini USB Port

Power Adapter Jack

Reset Button

To charge the unit, connect either the AC

or DC Power Adapter. The battery light will

illuminate and will take approximately 3

hours to charge. When battery is fully

charged, the red LED will turn green. Once

fully charged the battery will last

approximately 2 hours during normal use.

NOTE: Turn the unit ON or OFF by pressing the Power Key for 2 seconds.

Mount the Unit

You can mount your unit to the inside of your vehicle’s

windshield using the windshield bracket provided.

•Cleantheareawhereyouwishto

position the bracket thoroughly with

glass cleaner.

•Assemblethesuctioncupbracket.

Slide the mount clip onto the end of the

suction cup arm and tighten both

plastic nuts.

•Placethesuctioncupandbracketon

the windshield and push the locking

lever towards the windshield to secure

the bracket.

•Adjusttheangleofthebracketsothat

when the unit is attached to it you

can view the display and operate the

controls safely.

•Donotplacethemountinanairbagdeploymentarea.

NOTE: Mounting your unit in close proximity to a CB radio may

interfere with GPS reception. Should you encounter such interference,

position your unit as far away from your CB radio as possible.

Printed in China Part No. 480-836-P Version A

Map Screen

Scroll/Zoom Tab

Quick Info Tab

Routing Tab

Volume/Brightness

Control

Speed/Time Toggle

Basic Map Screen

Log Timers Status Toggle

Zoom In

Zoom Out

Scroll Map

Next Mile Marker

Distance to next Rest Area

Distance to next Travel Center

Distance to next Weigh Station

Stop Route

Program Detour

View Turn List

Change Multi-

Route Settings

View Trip CPU

Change Route Status

Quick Info Tab

NOTE: Touch anywhere on the map to enter the Main Menu.

Scroll/Zoom Tab

Routing Tab

Main Menu

Navigate To:

• EnterAddress

• PointsofInterest

• Home

• CityCenter

• RecentDestination

• Intersection

• Ofce

• FindonMap

Tools:

• AddressBook

• Multi-Route

• TripComputer

• Calculator

• HourLog

• MileageLog

• GPSStatus

• Backup/Restore

Settings:

• MyTruck

• Map

• Device

• Volume/Brightness

• Alerts

• Language

• Calibration

Enter Truck Info

• UndertheSettings tab in the main menu, tap the

My Truck icon to input your truck type.

• Chooseyouraxelcongurationandpress

• Tapeachboxtoenteryourtrucknameandcustomize

yourvehicle’sspecications.

• Whennished,pressSave. Now you are ready

to navigate.

Find an Address

•UndertheNavigate To tab in the main menu, tap the

Enter Address icon to navigate to an address.

•Clicktheappropriateboxestoenteryourdestination’s

State/Zip,City,Street,andHouseNumber.

•Asyoutypeusingthekeyboard,thelistwillautomati-

callylteryourresults.YoucanpressView List to

scroll through the results or simply tap on your desired

destination.

•Whennished,pressandthenconrmyour

truck information and press again.

Route Option

• TheRoute Option Page allows you to view

andcustomizeyourroute.

• PressSimulation for the unit to run a real time

simulation of your route including turn instructions

and warnings.

• PressRoute OptionstoCustomizeyourroute.

This page allows you to avoid tollways and

freeways, give preference to STAA routes, avoid

specicroads,addvialocations,orchangeyour

starting point.

• PressTurn List for detailed turn instructions for

your route.

• Whenyouarecomfortablewithyourroute,press

to begin navigating.

Find a POI

•The7600PROhasanextensivedatabaseofTruck

SpecicandStandardPointsofInterest.Underthe

Navigate To tab, click the Point of Interest icon.

•Choosewhereyouwouldlikethe7600PROtocenter

the search.

•FortruckspecicPOI’stapProMiles®/TruckDown®

Truck Specific POI.

•ForstandardPOIschoosetheappropriatecategoryor

press All to do a keyboard search of all categories.

NOTE: If you see on your map screen it means that you are not on the STAA National Network. The 7600 PRO does not have truck

specific data for these areas so be alert and follow local restrictions and posted signs.

Amenity Filter

• WhensearchingforTruckStopsthe7600PRO

givesyoutheabilitytolteryourresultsbasedon

the amenities of the travel center.

• EnteraPointofInterestsearch,tapProMiles®/

TruckDown® Truck Specific POI, press the

down arrow, select Truck Stops, then press the

Amenities button.

• Selecteachamenitythatyourequireandpressthe

button.

• Toturnofftheamenitylter,pressClearAllandthen

press the button.

Timers and Logs

•TheHour Log and State Mileage Log can be

found in the Tools menu.

•TheHour Log is a set of timers that will assist you in

llingoutyourHoursofServiceLogBook.

•Resetyourtimersatthebeginningofyourworkday.Set

the maximum times to your preferred limits.

•UsetheLog Timers Status Toggle in the Quick

Info Tab on the Map Screen to change your status.

•Thetimerswillcountdownandwarnyouwhenyouare

approaching your maximum limit.

•TheState Mileage Log automatically records the

number of miles that you drive in each state.

Configuration Options

• To reset unit to factory

settings, go to the Settings Tab in

the main menu, press Device, and

scroll down to Reset.

• To toggle between the Truck,

Car, RV, or Arrow icon go to

the Settings Tab in the main menu,

press Map, and scrolldown to

Vehicle.

• Ifyouarehavingtroublewithtouch

screen accuracy, calibrate your

screen by tapping Calibration

in the settings tab and follow the

onscreen instructions.

Using and Updating

Yourunitcomeswith3freemonthsofAURA,theworld’s

premierRedLight/SpeedCameradatabase.Keepingyourunit

updatedwithAURAwillinsurethatyoureceivethemostaccu-

rate warnings of upcoming red light cameras, speed cameras,

dangerous intersections, caution areas, and speed traps.

• Toactivateyourfreeupdates,gotohttp://aura.cobra.com

and click on the 7600 PRO.

• Followtheon-screeninstructionstoupdateyourunit.

Formoreinformation,viewthefullusermanualat

http://www.cobra.com/pages/product-manuals or call

customer service at (773) 889-3087.