Cobra Electronics ESD9851 RADAR DETECTOR User Manual USERS MANUAL

Download:
Mirror Download [FCC.gov]
Document ID	356892
Application ID	NyfTGmp1qi9UAEI7SJXi+Q==
Document Description	USERS MANUAL
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	123.86kB (1548221 bits)
Date Submitted	2003-09-15 00:00:00
Date Available	2003-09-15 00:00:00
Creation Date	2000-08-09 12:23:52
Producing Software	Acrobat PDFWriter 4.0 for Power Macintosh
Document Lastmod	2003-09-12 13:32:59
Document Title	USERS MANUAL
Document Creator	QuarkXPressâ„¢
Document Author:	Peota 5

*9850.MANUAL
8/9/00
12:23 PM
Page 1
How to Use Your Cobra
ESD Radar/Laser Detector
Contents
Introduction..................................................................A1
Safety Alert®/Strobe Alert™
Federal Law Governing Radar Detectors
Included Accessories
Controls & Indicators................................................A2
Our Thanks to You......................................................A3
Customer Support ...................................................A3
Features.............................................................................1
Installation.......................................................................2
Quick Start .......................................................................5
Digital Displays ............................................................6
Operation..........................................................................9
Turning On....................................................................9
Dim Button.................................................................10
Highway/City Mode.................................................12
Muting Mode.............................................................13
Calibrate the Compass...........................................15
Tone/Voice Alert .......................................................16
Memory Set................................................................17
Aux. Audio Jack.........................................................17
Detection........................................................................18
Band Detection.........................................................18
Audible Alarm Indicator.........................................18
Radar.................................................................................18
VG-2 Undetectable..................................................19
Safety Alert®/Strobe Alert™.................................20
Laser Detection.........................................................21
Radar/VG-2/Laser Alerts.........................................21
Facts About Safety Alert®/Strobe Alert™........22
Radar Frequencies....................................................23
Facts About Lidar (Laser).......................................23
Maintenance.................................................................24
Specifications...............................................................25
Limited One Year Warranty ...................................26
Optional Accessories................................................27
Order Form ....................................................................28
If You Think You Need Service.............Back Cover
Features of This Product
• 8-point Digital Compass
• Alpha/Numeric Dot
Matrix Text Readout
• Safety Alert® Traffic
Warning System
• Strobe Alert™
• Tone Alert
• Voice Alert
• Separate Visual and
Audio Alarms
• Laser Eye 360˚ Detection
• VG-2 Undetectable
• Auto and Manual Muting
• 4 Level Dim Button
• Audio Jack
• Superior Audio Volume
• Adjustable Windshield
Mounting Bracket
*9850.MANUAL
8/9/00
12:23 PM
Page 2
Installation
Location
Installation
Location
Selecting the proper location to mount the Cobra
ESD-9850 is very important for optimum
performance. Both radar and laser transmissions
pass through glass but not through other objects.
For this reason the Cobra ESD-9850 lenses must not
be blocked.The Laser Eye should have a view of the
rear window to take advantage of its 360˚ detection
capability.It is best to locate your detector as low on
the front windshield as possible.
Windshield Mounting
Windshield
Mounting
Attach cups to
bracket.
Attach bracket to
windshield.
Attach detector
to bracket.
Bend bracket for
correct detection
angle (if needed).
Do not use the
ESD-9850 to bend
bracket.
Plug power cord
into detector.
Plug power cord
into cigarette lighter.
Examples of metal in the windshield area that can
block or weaken incoming radar/laser signals:
1.Windshield wiper blades.
2. Mirrored sun screens.
3. Regular tinted glass does not affect radar
reception,although the darker tint at the
top of the tinted windshield prevents laser
light from penetrating.
4. Heated windshields, currently available as an
option for some Ford® (Instaclear) and GM®
(Electriclear vehicles act as an impenetrable
barrier to radar signals). If in doubt, check
with your dealer to see if this applies to
your vehicle.
*9850.MANUAL
8/9/00
12:23 PM
Page 4
Installation
Quick Start
Dash Mounting
Dash
Mounting
Turn On and Adjust Volume
Peel protective
paper off one side
of hook and loop
material.
Peel top paper off.
Place detector on
hook and loop pad.
Plug power cord
into detector.
Plug power cord
into cigarette lighter.
Note
It will be easy for you to
remove and reinstall your
Cobra ESD-9850 detector at
any time using this hook
and loop material on the
dashboard.
Remember: Without the
means to adjust the angle
of the detector (when
mounted as above), be
sure you that your Cobra
ESD-9850 has a level,clear
view of the road before you
attach the hook and loop
material.
Place on dash.
Turn On and
Adjust Volume
Note
For your convenience
Display Dim, City/Highway,
and Muting mode settings
are retained in memory
even when the power is
unplugged.
Rotate ON-OFF Volume Control to left (away
from you). The unit will per form a self-test
and the following message will appear:
”…Testing…System Ready.”
In both Tone and Voice Alert modes, the
message “Testing...[beep, beep, beep]...System
Ready”will be heard when the unit is turned on.
*9850.MANUAL
8/9/00
12:23 PM
Page 6
Quick Start
Quick Start
Set Display Brightness
Set Display
Brightness
Select from four levels of LED brightness for your
Cobra ESD-9850 display: Bright, Dim, Dimmer and
Dark.The ESD-9850’s state-of-the-art readout
presents clear alerts even in sunlight.
Set Highway/City Mode
City Mode
Set Highway/
City Mode
For urban driving–reduces number of X-Band
audible alerts.
Note
The ESD-9850 will retain the
chosen mode while OFF.
LED Displays
Note
A four position Dim mode is
provided for dusk or night
driving (please see Dim
Button,page 10 for details).
For more detailed
operation instructions
on display brightness,
see page 10.
Press and release Dim button once to select
normal setting.
Press and release Dim button a second time
to select Dim setting.
Press and release Dim button a third time to
select Dimmer setting.
Press and release Dim button again to select
Dark setting.
Press and release City button.
CTY will display while in City mode and
remain on for 2 seconds.
For more detailed
operation instructions
on set highway/city
mode, see page 12.
CTY will be replaced by a small lower case c.
Highway Mode
Press and release City button again.
HWY will be displayed for 2 seconds followed by h.
A double beep confirms highway mode.
*9850.MANUAL
8/9/00
12:23 PM
Page 8
Quick Start
Operation
Set Muting Mode Signal
Set Muting
Mode
Turning
On Your
ESD-9850
Turning On Your ESD-9850
Reduces signal alert volume.
Auto Muting
1 Press and release
Mute button when no
signal is being received.This will immediately
reduce volume of alerts.
For more detailed
operation instructions
on setting muting mode,
see page 13.
Manual Muting
Press and release Mute button to reduce
volume while signal is in progress. MUTE
will appear in the display.
Plug power cord
into detector.
Rotate ON-OFF Volume Control to the left
(away from you).
Plug power cord
into cigarette lighter.
To Switch Between Modes
Press and release Mute Button when no
signal is being received.
The message “Testing…System Ready “ will be
displayed, along with 3 beeps. The Compass
directions will then be displayed.
In Voice Alert, the message “Testing...System
Ready” will be heard.
*9850.MANUAL
8/9/00
12:24 PM
Page 10
Operation
Dim Button
Note
Bright = “Beep-Beep”
Dim = “Beep”
Dimmer = “Beep”
Dark = “Beep”
Operation
Dim Button
You may select from four levels of brightness for
your Cobra ESD-9850 display: Bright,Dim, Dimmer
and Dark (Off).
Note
The ESD-9850 will retain
the chosen brightness level
while OFF.
Note
City =“Beep”
Highway =“Beep-Beep”
Press and release Dim button a third time to
reduce display to dark (Off).A single beep
confirms this selection. The power light will
remain on.
Press and release Dim button a fourth time
to return display to Bright. A double beep
confirms this selection.
Note
The ESD-9850 will retain
the chosen mode while
OFF.
Press and release Dim button once to reduce
brightness to Dim.A single beep confirms this
selection.
Press and release Dim button twice to reduce
the display brightness to Dimmer. A single
beep confirms dim led brightness.
In Voice Alert, the message “Bright, Dim, Dimmer,
or Dark” will also be heard.
10
11
*9850.MANUAL
8/9/00
12:24 PM
Page 12
Operation
Highway/City
Mode
Note
Use City Mode in or near
cities where there are many
sources of false radar
signals such as microwave
relay towers and automatic
door openers. This will filter
out weak signals.
Operation
Highway/City Mode
Audio Muting
Muting
To select City Mode:
The Highway/City function is controlled by a
2-step button.
The mute button is used to temporarily turn off
the alarm and turn Auto Mute mode off and on.
Note
To completely turn off
incoming alerts while in
auto mode, press and
release mute button.
Manual Muting of the Audio
Use this operation to turn off the audio alarm at
any time.
Note
In either mode the next
alarm will begin with
normal volume. The ESD9850 will retain the chosen
mode while OFF.
Press and release City button and CTY will
be displayed for 2 seconds followed by c. A
single beep confirms City mode.
Note
The unit will announce
“Highway” or”City” in Voice
Mode.
Press and release Mute button to turn off
the audio for any alert. Mute will be displayed.
The alarm will be turned off until the signal is
over, with audio set at previous volume level for
next signal.
Note
Mute =“Beep”
OR
Auto Mute=“Beep-Beep”
Highway/City Mode
To select Highway Mode:
Press and release City button. HWY will be
displayed for 2 seconds followed by h.
In Voice Alert, the message “Mute” will be heard.
◆ Continued
12
13
*9850.MANUAL
8/9/00
12:24 PM
Page 14
Operation
Muting
Operation
Selecting Auto Muting Mode
Calibrate Compass
In Auto Mute mode the alerts will be heard at the
volume set for 3 seconds, then automatically be
reduced to a lower level.
The compass in your ESD-9850 must be calibrated
before you use it to give accurate directions.
Calibration allows the compass electronics t o
measure and store information about the
magnetic fields from your vehicle.
Press and release Mute button when no
signal is being received.
Auto Mute will appear in display for 2 seconds,
then disappear. All future alarms will be Auto
Mute.
Press City button for a minimum of
2 seconds. Compass is displayed.
In Voice Alert, the message “AutoMute”
will be heard.
Selecting Manual Muting Mode
In Manual Mute mode the alerts will always be
heard at the set volume level.
1 Press and release
Mute Button when no
signal is being received. Mute will appear on
the display for 2 seconds, then disappear.
14
The message “Drive in 2 circles… Press City
when done” will then be displayed.
Drive your car in a circle twice and then press
City. Your compass will be set. The display
provides 8 primary directions;N,NE, E, SE, S,
SW, W and NW.
Calibrate
Compass
Note
Pushing City button for
more than 2 seconds
produces a single beep
confirmation tone.
Note
If you decide to re-locate
your ESD-9850 to a different
location in your vehicle or
move it to another vehicle, it
is best to recalibrate the
compass.
Note
Your compass may not give
a correct reading if you are
inside any enclosure,
building or close to a large
metal tractor trailer, truck or
train. Your compass will
work again correctly as
soon as you get away from
these locations.There is no
need to calibrate your
compass again.
15
*9850.MANUAL
8/9/00
12:24 PM
Page 16
Operation
Tone Alarm
And Voice
Alert
Operation
Voice/Tone Settings
Memory Set
Memory Set
This product features an automatic, internal
electronic memory system. It will automatically
“remember”your settings when the unit is
turned off or removed from the power source up
to 7 days.
Press and hold MUTE button for two seconds
to change between Voice and Tone Alarms. In
Tone Setting, Tone will be displayed and a
beep will be heard.
Auxiliary
Audio Jack
Auxiliary Audio Jack
Use to connect an external speaker to your Cobra
ESD-9850 in environments with high ambient noise
levels.The internal speaker will be disconnected.
Voice Alert
The Voice Alert message will stay on for 2 seconds.
In Voice Alert setting, the message “Voice Alert”
will be heard.
16
17
*9850.MANUAL
8/9/00
12:24 PM
Page 18
Detection
Band
Detection
Detection
Band Detection
X,K and Ka Bands
This detector is designed to detect X, K,
Superwide Ka Band Radar, Laser (including LTI
20-20*,Ultra Lyte* and ProLaser* technologies),
VG-2, Safety Alert and Strobe Alert* signals.
The display will show the band received (X,K/Ka).
The signal strength will be indicated by a bar
graph which increases in size as you approach
the radar gun. Distinct tones will also be
generated for each band.
*360˚ Detection
X, K, Ka Alert
Weakest signal
Audible Alarm Audible Alarm Speaker
A different alert tone will sound for X,K, Ka,Laser
Speaker and
(a distinctly different tone for each of the three
Voice Alert
laser signals: LTI 20-20,UltraLyte and ProLaser),
Strongest signal
VG-2,and Safety and Strobe Alert signals.
In Voice Alert, the message “Be careful—X alert”
will be announced according to the band given,
followed by tones until the alert is over.
VG-2 Undetectable
Instant-On Detection
The Cobra ESD-9850 is also designed to detec t
Instant-on speed monitoring signals. Immediate
action is required when warning is given.
VG-2 Alert
The Cobra ESD-9850 is undetectable by police VG-2
detection devices. It will alert you when one is in
use near your vehicle. During this time, the unit is
still on full alert and able to detect other signals.
Note
The display does not
indicate signal strength.
VG-2 on the front of the unit will be displayed.
18
19
*9850.MANUAL
8/9/00
12:24 PM
Page 20
Detection
Detection
Safety Alert® Traffic Warning System
Safety Alert®
and
Alert™
Traffic Warning SafetyStrobe
Alert® Traffic Warning System and Strobe
System and
Alert™ will alert you with the following warnings:
Strobe Alert™ Emergency Vehicle, Road Hazard and Train.
Strobe Alert™
“Emergency Vehicle”will be displayed as scrolling
message.
Safety Alert®
Laser & Laser Eye 360˚ Detection
????”
“Emergency Vehicle” will be displayed as scrolling
message.
20
Note
The display does not
indicate signal strength.
Laser will be displayed followed by a scrolling
message of “UltraLyte”, “ProLaser”or “20/20”
depending on signal received.
In Voice Alert, the message “Be careful—Laser
alert” will be announced, followed by the
UltraLyte, ProLaser, or 20/20 tone.
Radar/VG-2/Laser Alerts
Type of Audible Signal
Interpretation and Response
Your COBRA ESD-9850 starts to signal
slowly, then increases in rate very
rapidly.
Most likely police radar.
FULL ALERT.
Your COBRA ESD-9850
signals just once.
Most likely a false sour ce, or could be
pulsed radar. Exercise Caution.
Very fast signal rate instantly.
Radar or VG-2 close by has been
suddenly switched on. FULL ALERT.
Slow signal rate as you approach
hill or bridge. Sharp increase in signal
rate as you reach hill or bridge .
Most likely police radar on other side
of hill or bridge. FULL ALERT.
Short-term, weak signaling;
series of such signals.
Most likely a false radar sour ce.
Exercise Caution.
Laser will trigger 3 distinct audible
signals;one each for LTI 20-20,Ultra
Lyte and ProLaser.
Use Full Caution.There are no false
laser signals.
Safety Alert and Strobe Alert ha ve
their own unique “European
Emergency” signal.
An emergency vehicle is approaching,
you are in the vicinity of a railroad
crossing, or you are approaching a
road hazard (construction sit e,
accident scene, etc.).
“Road Hazard” will be displayed.
“Train” will be displayed.
Laser
Radar/VG-2/
Laser Alerts
21
*9850.MANUAL
8/9/00
12:24 PM
Page 22
Detection
Detection
Facts About
Safety Alert®
Traffic Warning
System
Note
Strobe Alert™ is available in
over 1,000 cities and works
with Tomar and Opticom
systems. Call your local
Fire/Police department for
your area coverage or area
in which you will be
traveling.
Facts About the Safety Alert® Traffic
Warning System
FCC-approved Safety Alert Transmitters emit
microwave radar signals to indicate the presence of a
safety-related concern. Depending on the frequency of
these signals, as set on the transmitter, the outgoing
signal can indicate whether the transmitter is on a
speeding emergency vehicle or train,or at a stationary
road hazard location. These microwave signals are
located in the K-band and as a result, any radar
detector which detects K-band radar will detect these
Safety signals as standard K-band radar alerts. However,
unlike a standard radar detector, your Cobra ESD-9850
is designed to differentiate between a standard K-band
alert and a Safety Alert warning. Safety technology is
relatively new so the number of transmitters in
operation is still growing.You may not receive Safety
Alert on a daily basis and should not be surprised to
encounter some emergency vehicles, road hazards or
trains not yet equipped with these transmitters,
therefore failing to provide a signal. As Safety
Transmitters become more prevalent (the number of
operating transmitters is growing every day),these
Safety Alerts will become more common. The Safety
Alert Transmitter is in use in all 50 states in limited
quantities.
Radar Frequencies
Radar
Frequencies
There are now three frequencies that have been
approved by the FCC (Federal Communications
Commission) for use in speed monitoring
equipment. They are:
X Band (10.525 GHz),K Band (24.150 GHz)
Ka Band (33.400-36.000 GHz)
Your Cobra ESD-9850 can detect signals in all
three radar bands including photo radar and
STALKER radar which use the Ka band, and
Cobra’s Safety Alert signals on the K band.
Facts About LIDAR (Laser)
Facts About
LIDAR (Laser)
What is LIDAR?
LIDAR stands for Light Detection And Ranging.
While everyone refers to it as LASER the correct
name is LIDAR.
LIDARs must have a clear
line of sight to target a
vehicle during the entire
measurement interval.
Intervening objects such as
signposts, utility poles, tree
branches, etc.,will prevent
a valid speed reading.
How does LIDAR work?
LIDAR operates a lot like RADAR.Like RADAR,it
spreads out. Not as quickly, but it does spread, as
shown on the diagram below.
Facts About Strobe Alert™
Alerts motorists to over 50,000 emergency vehicles
equipped with strobe transmitters that activate red
lights at traffic intersections in emergency high speed
situations.
22
23
*9850.MANUAL
8/9/00
12:24 PM
Page 26
Limited One Year Warranty
Cobra Electronics
Corporation
6500 West Cortland Street
Chicago, Illinois 60707
www.cobraelectronics.com
COBRA ELECTRONICS CORPORATION warrants that its
COBRA 9 Band Radar/Laser Detec tors, and the component
parts thereof, will be free of defects in wor kmanship and
materials for period of one (1) year from the date of first
consumer purchase. This warranty may be enforced by the
first consumer purchaser, provided that the product is
utilized within the U.S.A.
COBRA will,without charge, repair or replace, at its option,
defective 9 Band Radar/Laser Detec tors, products or
component parts upon delivery to the COBRA factory
Service Department, accompanied by proof of the date of
first consumer purchase, such as a duplicated copy of a
sales receipt.
You must pay any initial shipping charges required to ship
the product for warranty service, but the return charges
will be at Cobra's expense, if the product is repaired or
replaced under warranty.
Exclusions: This limited warranty does not apply; 1) to any
product damaged by accident;2) in the event of misuse or
abuse of the product or as a result of unauthorized
alterations or repairs;3) if the serial number has been
altered, defaced or removed;4) if the owner of the product
resides outside the U.S.A.
All implied warranties, including warranties of
merchantability and fitness for a particular purpose
are limited in duration to the length of this warranty.
COBRA shall not be liable for any incidental,
consequential or other damages;including, without
limitation,damages resulting from loss of use or cost of
installation.
Some states do not allow limitations on how long an
implied warranty lasts and/or do not allow the
exclusion or limitation of incidental or consequential
damages, so the above limitations may not apply to
you.
26
Optional Accessories
Straight 12V DC Power Cord
Includes plug and fuse
420-080-N-001
$10.00
Windshield Mounting Bracket
Includes suction cups
545-139-N-001
$7.00
Curled 12V DC Power Cord
Includes plug and fuse
420-080-N-002
$10.00
You Can Find These Fine Accessories At Your Local
Cobra Dealer
If you wish, you can order directly from Cobra.
Order by phone
Call 1.773.889.3087 (Press 1 from the main menu)
8 a.m.-8 p.m. M-F CST. )
Order by mail or fax
Please fill out order form on ne xt page, and mail/fax
directly to Cobra.
Visit our website at:
www.cobraelectronics.com
27
*9850.MANUAL
8/9/00
12:24 PM
Page 28
Accessory Order Form
Item #
Description
Cost Ea. Qty.
420-080-N-001
420-080-N-002
545-139-N-001
Straight 12V Power Cord
Curled 12V Power Cord
Windshield Mounting Bracket
$10.00
$10.00
$7.00
Prices subject to change without notice.
Tax Table
Illinois residents add 7%
Cook Co. residents add .75% (7.75% total)
Chicago residents add 1% (8.75% total)
Indiana residents add 5%
Michigan residents add 4 %
Minnesota residents add 6%
Ohio residents add 6%
Wisconsin residents add 5%
For credit card orders fill out order form
and fax to: 1.773.622.2269
or call 1.773.889.3087
(Press 1 from the main menu)
8:00 am - 8:00 pm,M-F, CST.
Subtotal
(Tax if applicable)
Shipping/handling $4.00
Total
Make check or money order (no stamps)
payable to:
Cobra Electronics
6500 West Cortland St.
Chicago, IL 60707
Attn: Accessories Dept.
Please print clearly
Name
Address (No P.O. Box)
City
State
Zip
Telephone (
Credit Card No.
Exp. Date
Customer Signature
Circle One: Visa MasterCard Discover
Allow 4 to 6 weeks for delivery. Offer valid in Continental U.S.only.
28
Amount
*9850.MANUAL
8/9/00
12:24 PM
Page 30
Introduction
MicroTalk
© 2000 Cobra Electronics Corporation
6500 West Cortland Street
Chicago, IL 60707
www.cobraelectronics.com
If You Think You Need Service
For technical assistance,please call our Automated Help Desk which can assist
you by answering the most frequently asked questions about Cobra products.
1.773.889.3087
24 hours a day, 7 days a week.
A Consumer Service Representative can be reached through this same number 8:00 am - 8:00 pm,
Monday through Friday, CST.
Technical assistance is also available on-line in the Frequently Asked Questions (FAQ) section at
www.cobraelec.com or by e-mail to productinfo@cobraelec.com
Introduction
and Strobe Alert™
Operating Instructions for your Cobra
9 Band ESD 9850
Radar/Laser Detector
With Electronic Digital Compass *
and Voice Alert
If you think you need service call 1.773.889.3087
“If your product should require factory service please call Cobra first before sending your unit in.
This will ensure the fastest turn-around time on your repair.”
You may be asked to send your unit to the Cobra factory. It will be necessary to furnish the
following in order to have the product serviced and returned.
1. For Warranty Repair include some form of proof-of-purchase, such as a mechanical reproduction
or carbon or a sales receipt. If you send the original receipt it cannot be returned.
2. Send the entire product.
3. Enclose a description of what is happening with the unit.Include a typed or clearly print name
and address of where the unit is to be returned.
4. Pack unit securely to pr event damage in transit. If possible, use the original packing material.
5. Ship prepaid and insured by way of a traceable carrier such as United Parcel Service (UPS) or First
Class Mail to: Cobra Factory Service, Cobra Electronics Corporation,6500 W. Cortland St., Chicago,
IL 60707.
6. If the unit is in war ranty, upon receipt of your unit it will either be repaired or exchanged
depending on the model. Please allow approximately 3 to 4 weeks before contacting us for
status. If the unit is out of war ranty a letter will automatically be sent informing you of the
repair charge or replacement charge. If you have any questions, please call 1.773.889.3087 for
assistance.
Use of this product is not intended to, and does not, ensure that
the motorist and any passenger
will not be involved in a traffic
accident. It is only intended to
alert the motorist that an emergency or service vehicle equipped
with a CODE 3,Strobe (Opticom*
or Tomar Preemption System)
or Cobra Safety Alert Transmitter
is in the area as defined by the
range of the product. Please call
your local Fire/Police department
to verify if coverage exists in your
area.Motorists are expected to
exercise all due caution while
using this product, and to observe and follow all applicable
traffic laws. Operators of
emergency or service vehicles are
also expected to exercise
all due caution while using this
product, and to observe and
follow all applicable traffic laws.
*Opticom is a registered trademark
of 3M Corporation
1.
2.
Congratulations! You have just purchased the
most sophisticated RADAR/LASER DETECTOR
available today. This booklet contains instructions
and information designed so that you will be able
to understand how the Cobra ESD™-9850 works
and how radar and (LIDAR) laser are used. Enjoy
your Cobra ESD-9850 Radar/Laser Detector and
drive safely.
Federal Law Governing Use of
Radar Detectors
It is not against Federal Law to receive radar
transmissions on your COBRA Radar Detector.
The Communications Act of 1934 guarantees
your right to receive radio transmissions on
any frequency. Local laws that contravene the
Communications Act of 1934,while illegal,may
be enforced by your local law enforcement
officials until and unless they are prohibited from
doing so by Federal Court action.
WARNING: Before leaving your car, make sure
that you conceal your radar detector.This will
reduce the possibility of break-in and theft of
your unit.
Included with your ESD-9850
1. Windshield Bracket
2. Hook and Loop Material
3. Curled Power Cord
3.
© 2000 Cobra Electronics Corp.
Printed in Thailand
Part No. 480-302-P-001
Nothing comes close to a Cobra™
A1
*9850.MANUAL
8/9/00
12:24 PM
Page 33
Controls and Indicators
Our Thanks to You
1. On/Off Volume Control
Thank you for purchasing the Cobra ESD-9850
Radar/Laser Detector. Properly used, this Cobra
product will give you many years of reliable
service.
2. Mute Button
3. Dim Button
4. Audio Alerts Speaker
5.
Highway/City Button
6. Band/Signal Strength/
Compass Direction
Indicators
Customer Support
7. Laser Eye
10
8. Windshield Bracket
Mount
9. 12V DC Power Jack
10. Audio Jack
Should you encounter any problems with the
product or not understand its many features,
please refer to this owner’s manual. If, after
referring to the manual, you still need help,
call Cobra Customer Service at 773.889.3087.
Cobra Customer Service
Live operators are available
M-F 8:00 am - 8:00 pm CST
at: 773.889.3087
Automated Technical
Assistance available 24 hours
a day,seven days a week.
E-mail questions to:
productinfo@cobraelec.com
Cobra on the World Wide Web:
Frequently Asked Questions
(FAQ) can be found on-line
at:
www.cobraelectronics.com
The Cobra line of quality products
also includes:
• Citizens Band Radios
• MicroTalk™ Radios
• Accessories
• SafetyAlert™
Traffic Warning Systems
Nothing comes close to a Cobra™
A2
A3

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Creator                         : QuarkXPress™
Create Date                     : 2000:08:09 12:23:52
Subject                         : 
Title                           : 
Author                          : Peota 5
Producer                        : Acrobat PDFWriter 4.0 for Power Macintosh
Modify Date                     : 2003:09:12 13:32:59-04:00
Page Count                      : 17

EXIF Metadata provided by EXIF.tools