Cobra Electronics IRAD900 RADAR DETECTOR WITH BLUETOOTH User Manual USERS MANUAL

Cobra Electronics Corporation RADAR DETECTOR WITH BLUETOOTH USERS MANUAL

USERS MANUAL

WindshieldQuick Start GuidePrinted in China   Part No. 480-859-P Version ACobra iRadar® ATOM™ uses Bluetooth®  wireless technology to connect to your iOS or Android™ device.  Through this connection, the Cobra iRadar app  displays radar/laser alerts, lets you customize detector  settings,  and provides access to the iRadar Community.Cobra iRadar is made for: iPod touch (5th Generation)iPod touch (4th Generation)iPhone 5iPhone 4SiPhone 4Android® smartphones running OS 2.1 or higher Follow these simple steps to get your iRadar ATOM up and running:Mounting iRadar ATOMiRadar ATOM should be mounted on the windshield or dashboard of your vehicle. 3 mounting options are included:NOTE: This device complies with part 15 of FCC rules: Operation is subject  to the following two conditions: (1) This device may not cause harmful  interference, and (2) This device must accept any interference received  including interference that may cause undesired operation.CAUTION: Modifications or parts not approved by Cobra Electronics  Corporation may violate FCC Rules and void authority to operate this  equipment.Aтом™Suction Cup Mount –  This is the best option for  portability and moving the detector from car to car.  Make sure to thoroughly clean the  suction cups and windshield mount-ing area to insure a tight seal.Dual Lock® Mount –  This  mount is discreet and very solid for a permanent mounting location.  Make sure the adhesive side of the included Dual Lock is securely fastened to the wind-shield before adding the weight of the detector to it.Hook and Loop Fastener–  Included for dashboard  mounting.Your detector should be mounted so that it is oriented parallel to the road.  The suction cup mount comes standard bent at a 45° angle and Dual Lock® at 30°.  The metal is designed to bend with-out breaking. Adjust the angle so when mounted the detector is level with the road.Note: Do not attempt to bend the mount while the detector  is attached.Suction Cup MountDual Lock® MountHook & Loop Fastener Incorrect PositionsCorrect PositionModel iRAD 900Dual Lock® is a registered trademark of 3M Corporation.iRAD900_QSG.indd   1 1/17/13   9:52 AM
Powering iRadar ATOMPlug in your iRadar ATOM using the included cigarette lighter adapter.  Note: the adapter includes a USB port that can be used to charge your smartphone or tablet using the manu-facturer’s charging cable.For more discreet installation, a  hardwire kit is available at  www.cobra.com, part number RA-PSC B.  This can be easily wired into your fuse box so that iRadar automatically turns on when your car is running and does not require professional installation.Turn iRadar ATOM on/off by pressing and holding the Power/Volume switch on the side of the unit.  The LED on the front of the unit will shine red.RA-PSC BPairing/Connecting with iRadar ATOMIn order to pair iRadar ATOM to your smartphone, go to the Bluetooth Settings Menu on your phone/tablet.  For most devices this is found by pressing; Settings u Bluetooth.  Press Scan for Devices and/or wait for the Device list to populate and then select iRadar.Pairing can take up to 30 seconds.  If you are prompted to “Accept password to pair” press Confirm.  When iRadar is properly paired “Connected” will be shown on iOS products and “Paired but not connected” will be shown on Android products. When iRadar is properly paired and connected to your phone the LED on the front of the unit will shine blue.For more information on pairing with Bluetooth devices consult your phone’s owners manual.If you are having trouble initializing or maintaining your Bluetooth connection completely turn off your smart-phone and detector device, wait 30 seconds, and then turn them back on.  Now that you are paired with iRadar you’re ready to start using the Cobra iRadar app.Downloading the AppTo download the app you must enter the iTunes Store or Google Play and search for “Cobra iRadar”.  Follow the onscreen instructions to download and install the Cobra iRadar app. Cobra iRadar AppThe iRadar app is what separates Cobra from any other detectors out there.  Make sure to check out the Tutorial for a full explanation of app features.  The Tuto-rial automatically is displayed the first time you launch the app and then subsequently can be accessed from the Menu.Information on specific settings and  explanations of radar bands can be  found by pressing the           buttons in the  settings menus.explanations of radar bands can be found by pressing the           buttons in the iRadar CommunityAs you approach a specific Threat Area you will hear a short beep and then the app will indicate the Cobra’s assess-ment of the reliability of the threat.High-Threat Area means multiple reports have confirmed a legitimate threat in the area recently.Medium or Low-Threat Area means signals have been detected but have either not been confirmed or have not been reported lately.Paying attention to threat areas will allow you to be warned of potential threats before you enter radar detection range. Community Radar/Laser alert sharing means that you have an entire network of users working to keep you and your wallet safe.When you, or any other iRadar user, detects a radar or laser signal the alert information is anonymously sent to Cobra’s cloud servers.  Within seconds, that information is processed and displayed on your map as part of a Threat Area.iRAD900_QSG.indd   2 1/17/13   9:52 AM

Navigation menu