Cobra Electronics RBTM7800 BLUETOOTH MODULE User Manual 1

User Manual 1

Clear and specific instructions describing the conditions, limitations and procedures for third-parties to

use and/or integrate the module into a host device. Grantee must demonstrate how it will retain

control over the final installation of the device, such that compliance of the product is ensured:

• Manual: It must be clear that manual is intended to OEM/Integrators

• Does cover/or title page indicate something similar to “OEM/Integrators Installations Manual”?

• Or is the content of manual clear about this?

Manual must indicate

• That module is limited to OEM installation ONLY

• That OEM integrators is responsible for ensuring that the end-user has no manual instructions to

remove or install module

• That module is limited to installation in mobile or fixed applications, according to Part 2.1091(b)

• Labeling instructions of finished products. Please refer to KDB784748 D01 v07, section 8. Page 6/7

last two paragraphs which include the required instructions

https://apps.fcc.gov/kdb/GetAttachment.html?id=26762

example: “Contains Transmitter Module FCC ID: XYZMODEL1” or “Contains FCC ID: XYZMODEL1” etc.

The Grantee must instruct the OEM/Integrator to include the following instructions/statements in the

host user’s manual (i.e. end product).

• Statements required per Part 15.19 and 15.21

• End-users must be provided with transmitter/antenna installation requirements and operating

conditions for satisfying RF exposure compliance:

• The module is integrated with the host, the grantee (the party responsible for the module grant)

shall provide guidance to the host manufacturer for compliance with the Part 15B requirements.”

• § 15.21 & 15.19 Information to user.

• 15.21 The users manual or instruction manual for an intentional or unintentional radiator shall

caution the user that changes or modifications not expressly approved by the party responsible for

compliance could void the user's authority to operate the equipment.

• The OEM integrator shall include in the manual for the End User this warning statement.

15.19 This device complies with part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) This device may not cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause undesired operation.