Codan NGT SR Radio Transceiver
User Manual: Codan NGT SR Radio HF Radios | LMR & HF Radio | Codan Radio
Open the PDF directly: View PDF .
Page Count: 2
www.codanradio.com © Copyright 2012
FEATURES AT A GLANCE
Innovative handset
Easy installation
Easitalk
™
Emergency Selcall
Smart monitoring
High dynamic receive range
Computer control
Voice encryption
Fax, Data, Email & Internet
Remote diagnostics
Automatic Link Establishment (ALE)
Built-In Test Equipment (BITE)
Calling facilities
GPS
12-20085 Issue 11 6/2012
NGT™
SR
TRANSCEIVER
The NGT™ SR is a comprehensive solution to your communication
needs. While incorporating all the usual features of Codan’s leading-
edge High Frequency (HF) radio technology, this Transceiver also
features a user-friendly handset, advanced calling features and
Easitalk as standard. Extensive Automated Link Establishment (ALE)
capabilities, voice encryption, GPS, fax, data and email transmission
are optional.
INNOVATIVE HANDSET
The handset can access all programming procedures and provides an
advanced interface, effi cient operation and easier network management.
The handset supports varied requirements ranging from traditional
manual voice operation, to sophisticated ALE-reliant calling procedures.
Users can program channels, functions and addresses into the handset to
meet their own requirements. An address book with up to 100 addresses
can be easily retrieved via the menu.
EASY INSTALLATION
Every aspect of the NGT™ SR has been developed for easy installation
and use in both fi xed and mobile environments. The unit is small and
convenient to mount in any position that makes viewing easier.
EASITALK
™
The NGT™ SR uses Digital Signal Processing techniques to process received
audio signals to minimise the effect of interference and reduce noise.
EMERGENCY SELCALL
The NGT™ SR has a unique optional emergency calling facility. A distress
signal can be sent automatically to selected stations.
SMART MONITORING
A variety of channels can be monitored while the radio is muted,
and calls can be received on any of the channels being scanned.
HIGH DYNAMIC RECEIVE RANGE
The high dynamic range of the NGT™ receiver provides better reception
in diffi cult conditions.
COMPUTER CONTROL
The NGT™ SR can be controlled by a computer through an RS232 port.
This assists with paging, GPS tracking and logging, and other
automated applications.
VOICE ENCRYPTION
The optional Voice Encryptor provides communication security (COMSEC)
and enables users to communicate sensitive information in confi dence
without complicated setup procedures. It also provides visual
confi rmation that the conversation is secure.
FAX, DATA, EMAIL & INTERNET
The NGT™ SR is designed for both voice and data applications. With
Codan’s optional UUPlus™ email software, a highly effi cient email
network can be set up using the 3012 HF Data Modem.
T: +61 8 8305 0311 F: +61 8 8305 0411 E: sales@codanradio.com
Codan Limited 81 Graves Street Newton South Australia 5074 Australia
RADIO COMMUNICATIONS
www.codanradio.com
NGT™
SR
TRANSCEIVER
12-20085 Issue 11 6/2012
Values noted are typical. Equipment descriptions and specifi cations subject to change without notice or obligation.
CODAN™, NGT™ and CALM™ are trademarks of Codan
Limited. Other brand, product and company names
mentioned in this document are trademarks or
registered trademarks of their respective holders.
REMOTE DIAGNOSTICS
With Remote Diagnostics your radio installation can be
tested remotely by another station to measure parameters
such as signal strength, battery voltage levels and power.
It is also possible to reconfi gure most Transceiver parameters
and disable the Transceiver.
AUTOMATIC LINK ESTABLISHMENT (ALE)
To automatically select the most suitable channel, ALE
is available as an option. CODAN™ ALE provides full
interoperability with other equipment compliant with
FED-STD-1045 ALE.
In addition, CODAN™ Transceivers outperform many
conventional ALE systems through the use of Codan
Automated Link Management (CALM™).
CALM™ provides the following additional capabilities:
Multiple networks can be scanned simultaneously at a
scan rate of 8 channels per second. This enables up to
3 times more channels to be scanned in the same time
as other ALE systems.
A profi le of channel characteristics is developed over time
using a 24 hour based Link Quality Analysis (LQA) database,
which has over 7 times more storage capacity and uses a
higher data resolution than conventional ALE systems. This
signifi cantly reduces sounding activities and enables the
Transceiver to select a suitable channel at any time of the
day from the moment it is switched on.
The Listen-Before-Transmit capability detects both voice
and ALE activities on the channel before initiating ALE.
This avoids interfering on channels that are engaged.
BITE
Built-In Test Equipment (BITE) is a process that can be
initiated by the user to test and report on of the
system’s performance.
CALLING FACILITIES
The NGT™ SR has Selcall, Phone call and Message call
capabilities. All incoming calls are time-stamped to identify
precisely when each call arrived.
Selcall: Enables an operator can call a single Transceiver and
only that unit will respond—no more listening to noise while
waiting for a call. The called Transceiver will also signal that
the call or message has been received.
Phone call: Enables the Transceiver to make telephone calls
via suitable bases equipped with a telephone interconnect.
Message call: Enables you to send or receive text messages
of up to 64 characters; an external computer is not required.
Messages can be encrypted and successful transmissions will
be confi rmed.
GPS
An optional GPS satellite receiver can be connected to
the Transceiver via an RS232 port. This enables a live display
of your current GPS position by latitude and longitude,
transmission of your position to another unit, and the
ability to request another unit’s position.
When used with tracking software, the GPS option provides
a complete tracking system to enhance safety. In addition,
a security PIN can be used to scramble GPS data so that
positions are available only to authorised users.
SPECIFICATIONS
Frequency range Transmit: 1.6 to 30 MHz, Receive: 250 kHz to 30 MHz
Channel capacity 400 channels
Operating mode Single sideband (J3E, USB, LSB, AM, CW)
Frequency stability ±0.3 ppm (–30 to +60°C)
Primary voltage 12 V DC nominal, negative earth
Primary power Receive (no signal): 0.7 A
Transmit: J3E voice: 6 A
J3E two-tone: 10–14 A
Receiver sensitivity –125 dBm (10 dB SINAD)
Transmitting power output 125 watts PEP
Spurious & harmonic emissions Better than 65 dB below PEP
Temperature –30 to +60°C
Size & weight 2011 RF Unit: 210 W x 270 D x 65 H mm; 3.3 kg
2020 Handset: 65 W x 35 D x 130 H mm; 0.3 kg
2030 Junction Box: 135 W x 117 D x 38 H mm; 0.4 kg
ALE link quality data 24 hours of up to 100 stations and 100 channels using a
total of 72675 discrete sets of LQA data
ALE link quality data resolution Local: 8 bits SINAD, 8 bits BER
Remote: 5 bits SINAD, 5 bits BER
Dust, Vibration, Shock MIL-STD-810F method 510.4, method 514.5, method 516.5
Computer interface RS232, 300 to 19200 baud
GPS interface NMEA-0183 (4800 baud, RS232)
OPTIONS / ACCESSORIES
Option Purpose
CALM™ FED-STD-1045 ALE / CALM™
F Fan for continuous data
transmission
GPS GPS interface
NBF Narrow Band Filter (500 Hz)
WBF Wide Band Filter
COMSEC Voice Encryptor