Code Systems GMRFAB01 Vehicle part of remote start/keyless entry system User Manual CLAx

Code Systems Inc Vehicle part of remote start/keyless entry system CLAx

user manual

Re: Certification for Code Systems, Inc Transceiver
Model/PN(s): 19131628, 19131602
FCC ID: GOH-GMRFAB01
IC: 3954A-RFA1
The device under test is manufactured by the grantee (Code Systems, Inc) and sold as an
OEM product. Per 47 CFR 2.909, 2.927, 2.931, 2.1033, 15.15(b) etc…, the grantee must
ensure the end-user has all applicable / appropriate operating instructions. When end-user
instructions are required, as in the case of this product, the grantee must notify the OEM
to notify the end-user. Code Systems, Inc will supply the following information to the
reseller/distributor dictating what must be included in the end user’s manual for the
commercial product.
INFORMATION TO BE INCLUDED IN THE END USER'S MANUAL
The following information must be included in the end product user’s manual to
ensure continued FCC and Industry Canada regulatory compliance. The ID
numbers must be included in the manual if the device label is not readily accessible
to the end user. The compliance paragraphs below must be included in the user's
manual.
************************************************************************
FCC ID:GOH-GMRFAB01 IC: 3954A-RFA1
This device complies with Part 15 of the FCC Rules and with RSS-210 of Industry
Canada. Operation is subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) This device must accept any interference received,
including interference that may cause undesired operation.
WARNING: Changes or modifications not expressively approved by the party
responsible for compliance could void the user's authority to operate the equipment. In
addition, this device has been designed to operate with the antenna listed below having a
maximum gain of 1.5 dB and a minimum cable loss of 1.2 dB. Antennas and cable not
included in this list or having a gain greater than 0.3 dB are strictly prohibited for use
with this device. The required antenna impedance is 50 ohms.
Xuzhou Huaxia Harness Co, PN: GM19131608, Dipole antenna with 8 ft RG174/U coax.
To reduce potential radio interference to other users, the antenna type and its gain should
be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than
that needed for successful communication.
************************************************************************

Navigation menu