Adonis 2 Groups Spec
2014-10-16
: Coffee Adonis 2 Spec adonis_2_spec Adonis Victoria Arduino auction_html
Open the PDF directly: View PDF 
.
Page Count: 1
Nuova Distribution USA, LLC
6940 Salashan Parkway, Building A • Ferndale, WA 98248
www.nuovadistribution.com • (p) 360-366-2226 • (f) 360-366-4015
Victoria Arduino Adonis 2 Group Spec Sheet
Water Requirements
• 3/8” dedicated cold water line with shut-off valve and
compression fitting.
• Water hardness cannot exceed 3gpg or 50 ppm. If
water hardness exceeds 3gpg a water softener must
be installed.
• Minimum incoming water flow rate of 35 GPH and
maximum line pressure of 70 PSI / 5 BAR.
Water Softening Equipment
1. Water Softener Capacity: Single - 4400 gpg
2. Water Softener Capacity: Double - 8800 gpg
3. Water Softener Capacity: Triple - 13200 gpg
4. Water Softener Capacity: Automatic - Programmable
5. Water Softener Capacity: Manual - 4400 gpg
Power Requirements
• Volts: 220 (voltage range of 208-240)
• Watts: 4500
• Amp draw: 21
• Receptacle: Nema L6-30 Twist Nema L6-30
Twist
NSF / ANSI Std.4
The average water consumption of this machine
is 4 gallons per day, which represents 128 drinks
at 4oz per drink.
Water Softener/Maintenance Calculation
Cartridge Grain
Capacity ÷ Water Hardness
(grains per gallon) = Gallon Capacity
of Cartridge ÷ Gallons of Water
Used per Day = Days Until Cartridge
Needs to be Replaced
÷ = ÷ =
34”
23”
I, the customer, understand that these requirements must be in when the installer arrives. Failure to have the site ready
will result in additional service and travel charges, and may cause further delays in installation.
Customer Name: _______________________________________ Signature: ________________________________________
Company Name: ____________________________________________________________________________________________
Phone: __________________________ Fax: __________________________ Email: _____________________________
Shipping Dimensions & Weight
Countertop Drain
Hole Location
34”
23”
2.5”
(Front)
Version 3.0
Counter Space Requirements
Drain Requirements
• Open gravity drain of minimum 1.25 inch I.D., within
4 feet of the machine.
• Height: 23 inches • Depth: 23 inches
• Width: 34 inches • Weight: 240 pounds
• Height: 31 inches • Depth: 27 inches
• Width: 38 inches • Weight: 250 pounds
