TAC 48GS

2014-10-16

: Coffee Tac-48Gs TAC-48GS tac_series True auction_html

Open the PDF directly: View PDF PDF.
Page Count: 2

DownloadTAC-48GS
Open PDF In BrowserView PDF
AIA #

Project Name:

TRUE FOOD SERVICE
EQUIPMENT, INC.

Location:

St. Charles Industrial Center • P.O. Box 970 • O’Fallon, Missouri 63366
Item #:
(636)240-2400 • FAX (636)272-2408 • (800)325-6152 • www.truemfg.com
Parts Dept. (800)424-TRUE • Parts Dept. FAX# (636)272-9471
Model #:

SIS #

Qty:

Vertical Air Curtain:

Model:

TAC-48GS

Glass Sided Refrigerator

TAC-48GS
True’s air curtain merchandisers
are designed with enduring
quality that protects your long
term investment.
Designed using the highest
quality materials and
components to provide the
user with colder product
temperatures and lower
utility costs in an attractive
merchandiser that brilliantly
displays food and beverages.
Large, open front allows easy
access to display levels and
places maximum attention on
merchandising.
Oversized, factory balanced,
refrigeration system holds 33°F
to 38°F (.5°C to 3.3°C).
Exclusive, reversing condenser
fan motors reduce maintenance
costs and optimize cabinet
performance.
Durable and permanent
non-peel or chip white vinyl
exterior with white aluminum
interior and 300 series stainless
steel floor and deck pans.
Entire cabinet structure is
foamed-in-place using high
density, CFC free, polyurethane
insulation.
Adjustable, heavy duty PVC
coated shelves.

ROUGH-IN DATA

Specifications subject to change without notice.
Chart dimensions rounded up to the nearest 1/8" (millimeters rounded up to next whole number).

Cabinet Dimensions
(inches)

Capacity
(Cu. Ft.)
Model
TAC-48GS

(liters)

34

(mm)

Shelves
4

963

L
48

D
301/4

H
805/8

HP
1

1220

769

2048

1

NEMA
Voltage
Amps Config.
208-230/60/1 12.0
6-15P
230-240/50/1

9.0

▲

Cord Length
(total ft.)

Crated
Weight
(lbs.)

(total m)

(kg)

9

475

2.74

216

▲ Plug type varies by country.

TRUE REFRIGERATION

APPROVALS:

TM

MADE IN

U.S.A.

®

R

SINCE 1945

12/05

Printed in U.S.A.

AVAILABLE AT:

Model:

Vertical Air Curtain:

TAC-48GS

Glass Sided Refrigerator

STANDARD FEATURES
DESIGN
• Designed using the highest quality
materials and components to provide the
user with colder product temperatures
and lower utility costs in an attractive
merchandiser that brilliantly displays prepackaged food and beverages.
REFRIGERATION SYSTEM
• Factory engineered, self-contained,
capillary tube system using environmentally
friendly (CFC free) R404A refrigerant.
• Time initiated, time terminated off cycle
defrost system.
• Extra large evaporator coil and condenser
balanced with higher horsepower
compressor; maintains cabinet
temperatures 33°F to 38°F (.5°C to 3.3°C)
for the best in food preservation.
• Sealed, cast iron, self-lubricating
evaporator fan motors.
• Bottom mounted condensing unit
positioned for easy maintenance.
• Exclusive reversing condenser fan motors.
Fan motors reverse during defrost cycles
to help keep condenser coil free from
dirt, dust and debris. Keeping coils
clean optimizes the unit’s performance
providing colder holding temperatures
and increased energy efficiency. Regularly
scheduled thorough cleaning of coils still
recommended.
CABINET CONSTRUCTION
• Exterior - durable and permanent non-peel
or chip white vinyl front and sides with
matching white aluminum back.
• Plexiglass lower front and side panels.
Durable and break resistant maximizes
product visibility.
• Interior - attractive, NSF approved, white
aluminum liner. 300 series stainless steel
interior floor and deck pans.

• Insulation - entire cabinet structure is
foamed-in-place using high density, CFC
free, polyurethane insulation.
• Welded, heavy duty galvanized frame rail
dipped in rust inhibiting enamel paint for
corrosion protection inside and out.
• Frame rail fitted with leg levelers.
• Illuminated exterior sign panel. Variety of
sign options available.
SHELVING
• Four (4) adjustable, heavy duty PVC coated
wire shelves 44"L x 17"D (1118 mm x
432 mm). Four (4) chrome plated shelf clips
included per shelf.
• Shelf support pilasters made of same
material as cabinet interior; shelves are
adjustable on 1/2" (13 mm) increments.
LIGHTING
• Fluorescent interior lighting, safety
shielded.
• T8 bulbs and electronic ballast; provides
better illumination of product and
increased energy efficiency.
MODEL FEATURES
• Perforated interior back wall for more
efficient airflow.
• Listed under NSF-7 for the storage and/or
display of packaged or bottled product.
ELECTRICAL
• Unit completely pre-wired at factory and
ready for final connection to a
208-230V / 60 Hz single phase 15 amp
dedicated outlet. Cord and plug set
included.
208-230/60/1
NEMA-6-15R

RECOMMENDED OPERATION CONDITIONS
• TAC models are designed to operate in
an environment where temperature and
humidity do not exceed 75°F (23.8°C) and
55% relative humidity.
• Unit should not be installed near HVAC
vents, fans or doorways that will disrupt
the air curtain and compromise the
function of the cabinet. Unit should not be
installed in direct sunlight.
• Air curtain models will run most efficiently
when loaded with product.
• Drain plumbing hookup recommended.
Condensate pan heater available if there is
no access to drain plumbing. Condensate
pan heater must be field installed and
requires a separate 15 amp, 120V circut.
OPTIONAL FEATURES/ACCESSORIES
Upcharge and lead times may apply.
❒ 230-240V/50Hz
❒ 21/2"(64mm) diameter castors.
❒ Variety of sign panels - see our website for
the latest color and sign offerings.
❒ Black exterior.
❒ Stainless steel exterior.
❒ Black interior liner with black shelves.
❒ Additional shelves.
❒ White cantilevered shelves.
❒ Stainless steel cantilevered shelves.
❒ Pricing strips.
❒ Night shade.
❒ Night cover.
❒ Condensate pan heater kit (must be field
installed and requires a separate 15 amp,
120V circuit).
❒ Condensate pump kit.
❒ Remote cabinets (condensing unit supplied
by others; system comes standard with
404A expansion valve and requires R404A
refrigerant). Consult factory technical
service department for BTU information.

PLAN VIEW
48"

303/16"
(767 mm)

(1220 mm)

7911/16"
(2025 mm)

15/16"
(24 mm)

805/8"
(2048 mm)

211/2"
ELEVATION

WARRANTY
METRIC DIMENSIONS ROUNDED UP TO THE
One year warranty on all parts
NEAREST WHOLE MILLIMETER
& labor and an additional 4 year
SPECIFICATIONS SUBJECT TO CHANGE
warranty on compressor.
WITHOUT NOTICE
(U.S.A. only)

RIGHT VIEW

KCL

(547 mm)

Model

Elevation

Right

Plan

3D

TAC-48GS

TFD026E

TFD026S

TFD026P

TFD0263

TRUE FOOD SERVICE EQUIPMENT
St. Charles Industrial Center • P.O. Box 970 • O’Fallon, Missouri 63366 • (636)240-2400 • FAX (636)272-2408 • (800)325-6152 • www.truemfg.com
Source Exif Data: 
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
Page Count                      : 2
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:36477c9e-111c-11db-bb0f-000d935894a4
Producer                        : Acrobat Distiller 6.0.1 for Macintosh
Create Date                     : 2006:07:11 15:31:18-05:00
Modify Date                     : 2006:07:11 15:31:18-05:00
Creator Tool                    : InDesign: pictwpstops filter 1.0
Document ID                     : uuid:3647717a-111c-11db-bb0f-000d935894a4
Format                          : application/pdf
Creator                         : spebeh
Title                           : TAC-48GS
Author                          : spebeh
EXIF Metadata provided by EXIF.tools

Navigation menu